Commit 4275f38507 ("OvmfPkg/AcpiPlatformDxe: alloc blobs from 64-bit
space unless restricted") introduced a variable which is [incorrectly]
identified by GCC as being potentially uninitialized. So let's just set
it to NULL before use.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
... by narrower than 8-byte ADD_POINTER references.
Introduce the CollectAllocationsRestrictedTo32Bit() function, which
iterates over the linker/loader script, and collects the names of the
fw_cfg blobs that are referenced by QEMU_LOADER_ADD_POINTER.PointeeFile
fields, such that QEMU_LOADER_ADD_POINTER.PointerSize is less than 8. This
means that the pointee blob's address will have to be patched into a
narrower-than-8 byte pointer field, hence the pointee blob must not be
allocated from 64-bit address space.
In ProcessCmdAllocate(), consult these restrictions when setting the
maximum address for gBS->AllocatePages(). The default is now MAX_UINT64,
unless restricted like described above to the pre-patch MAX_UINT32 limit.
In combination with Ard's QEMU commit cb51ac2ffe36 ("hw/arm/virt: generate
64-bit addressable ACPI objects", 2017-04-10), this patch enables
OvmfPkg/AcpiPlatformDxe to work entirely above the 4GB mark.
(An upcoming / planned aarch64 QEMU machine type will have no RAM under
4GB at all. Plus, moving the allocations higher is beneficial to the
current "virt" machine type as well; in Ard's words: "having all firmware
allocations inside the same 1 GB (or 512 MB for 64k pages) frame reduces
the TLB footprint".)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Suggested-by: Gerd Hoffmann <kraxel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
ACPI tables may contain multiple fields which point to the same
destination table. For example, in some revisions, the FADT contains
both DSDT and X_DSDT fields, and they may both point to the DSDT.
Previously, if Qemu created QEMU_LOADER_ADD_POINTER linker commands for
such instances, the linking process would attempt to install the same
pointed-to table repeatedly. For tables of which there must only be one
instance, the call to AcpiProtocol->InstallAcpiTable() would fail during
the second linker command pointing to the same table, thus entirely
aborting the ACPI table linking process. In the case of tables of which
there may be multiple instances, the table would end up duplicated.
This change adds a memoisation data structure which tracks the table
pointers that have already been processed; even if the same pointer is
encountered multiple times, it is only processed once.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
[lersek@redhat.com: DSDT<->XSDT typo, debug msg, and coding style fixups]
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=368
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Drop the explicit S3SaveState protocol and opcode management; instead,
create ACPI S3 Boot Script opcodes for the WRITE_POINTER commands with
QemuFwCfgS3Lib functions.
In this case, we have a dynamically allocated Context structure, hence the
patch demonstrates how the FW_CFG_BOOT_SCRIPT_CALLBACK_FUNCTION takes
ownership of Context.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=394
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
At this point we're ready to retire QemuFwCfgS3Enabled() from the
QemuFwCfgLib class, together with its implementations in:
- ArmVirtPkg/Library/QemuFwCfgLib/QemuFwCfgLib.c
- OvmfPkg/Library/QemuFwCfgLib/QemuFwCfgLib.c
Extend all modules that call the function with a new QemuFwCfgS3Lib class
dependency. Thanks to the previously added library class, instances, and
class resolutions, we can do this switch now as tightly as possible.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=394
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The Count parameter of RShiftU64() must be strictly smaller than 64.
ProcessCmdAddPointer() and ProcessCmdWritePointer() currently ensure this
by "cleverly" breaking the last bit of a potentially 8-byte right shift
out to a separate operation.
Instead, exclude the Count==64 case explicitly (in which case the
preexistent outer RShiftU64() would return 0), and keep only the inner
RShiftU64(), with the direct Count however.
This is not a functional change, just style improvement.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Ultimately, each QEMU_LOADER_WRITE_POINTER command creates a guest memory
reference in some QEMU device. When the virtual machine is reset, the
device willfully forgets the guest address, since the guest memory is
wholly invalidated during platform reset.
... Unless the reset is part of S3 resume. Then the guest memory is
preserved intact, and the firmware must reprogram those devices with the
original guest memory allocation addresses.
This patch accumulates the fw_cfg select, skip and write operations of
ProcessCmdWritePointer() in a validated / condensed form, and turns them
into an ACPI S3 Boot Script fragment at the very end of
InstallQemuFwCfgTables().
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=359
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The QEMU_LOADER_WRITE_POINTER command instructs the firmware to write the
address of a field within a previously allocated/downloaded fw_cfg blob
into another (writeable) fw_cfg file at a specific offset.
Put differently, QEMU_LOADER_WRITE_POINTER propagates, to QEMU, the
address that QEMU_LOADER_ALLOCATE placed the designated fw_cfg blob at, as
adjusted for the given field inside the allocated blob.
The implementation is similar to that of QEMU_LOADER_ADD_POINTER. Since
here we "patch" a pointer object in "fw_cfg file space", not guest memory
space, we utilize the QemuFwCfgSkipBytes() and QemuFwCfgWriteBytes() APIs
completed in commit range 465663e9f128..7fcb73541299.
An interesting aspect is that QEMU_LOADER_WRITE_POINTER creates a
host-level reference to a guest memory location. Therefore, if we fail to
process the linker/loader script for any reason, we have to clear out
those references first, before we release the guest memory allocations in
response to the error.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=359
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The longest line is currently 84 characters long.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=359
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Correct some typos (discovered with the codespell utility)
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Thomas Huth <thuth@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Now that the previous patches ensure that we can access all PCI devices in
AcpiPlatformDxe, we can enable IO and MMIO decoding for all of them while
we contact QEMU for the ACPI tables. See more details in the patch titled:
OvmfPkg: introduce gRootBridgesConnectedEventGroupGuid
In particular, this patch will prevent the bug when the 64-bit MMIO
aperture is completely missing from QEMU's _CRS, and consequently Linux
rejects 64-bit BARs with the error message
pci 0000:00:03.0: can't claim BAR 4 [mem 0x800000000-0x8007fffff 64bit
pref]: no compatible bridge window
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Currently the entry point functions of both driver builds
(AcpiPlatformDxe.inf and QemuFwCfgAcpiPlatformDxe.inf) directly contain
the logic that is different between the two builds.
Because we're going to restructure the entry point logic soon, we'd have
to duplicate the same new code between both entry point functions.
Push down the logic in which they differ to a new function:
- InstallAcpiTables() [AcpiPlatform.c]
- InstallAcpiTables() [QemuFwCfgAcpiPlatform.c]
and extract a common entry point function:
- AcpiPlatformEntryPoint() [EntryPoint.c]
which we can soon modify without code duplication.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16885 6f19259b-4bc3-4df7-8a09-765794883524
This name better aligns with InstallXenTables and InstallOvmfFvTables.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16884 6f19259b-4bc3-4df7-8a09-765794883524
Since the protocol is in the depex, there is no reason to expect we
might fail to locate the protocol.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16882 6f19259b-4bc3-4df7-8a09-765794883524
Having this entry point in QemuFwCfgAcpi.c should not cause a problem
for the other driver which supports Xen and older QEMU versions.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16880 6f19259b-4bc3-4df7-8a09-765794883524
The code left behind in Qemu.c has some PCAT dependencies, and might
not be able to build on all platforms.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16696 6f19259b-4bc3-4df7-8a09-765794883524
Ard Biesheuvel
Laszlo Ersek
Phil Dennis-Jordan
Thomas Huth
Jordan Justen