The destination GUID comes first; from
"MdePkg/Include/Library/BaseMemoryLib.h":
> GUID *
> EFIAPI
> CopyGuid (
> OUT GUID *DestinationGuid,
> IN CONST GUID *SourceGuid
> );
Here "NewGuid" is the GUID looked up by GetGuidFromStringName(), and
"Guid" is where EfiShellGetGuidFromName() has to propagate that result to.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Tim Lewis <tim.lewis@insyde.com>
Reported-by: Tim Lewis <tim.lewis@insyde.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Tim Lewis <tim.lewis@insyde.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Update CRC32 in the EFI System Table header after shell changes the
value of gST->ConsoleOutHandle and gST->ConOut
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Cinnamon Shia <cinnamon.shia@hpe.com>
Reviewed-By: Tapan Shah <tapandshah@hpe.com>
Reviewed-By: Jaben Carsey <Jaben.carsey@intel.com>
As per ECR 1349 change in UEFI Shell Specification 2.2, expanding
a special output file name to include "NULL". Previously it only
supported "NUL" as a special output file and it was case sensitive.
With this change both "NUL" and "NULL" are special output file and
checked as case insensitive.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
According to the latest shell spec, in function FindFiles(),
when no files were found, it should return EFI_NOT_FOUND.
But current codes don't follow the spec.
This patch is to fix this issue.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
This reverts commit c0bcd3433f.
The above commit causes several regression of "echo" command:
1. Double quotes are not being stripped from the final text. UEFI Shell 2.2 section 3.4.5 chops out the quotes.
2. Output redirection is not working as expected. Text is being redirected, but the ‘> …’ text should not be.
3. Inconsistent special character handling. For example, comments with # seem to be parsed out correctly, but handing of ^ is incorrect.
In summary, ‘echo “You are ^#1” > t.txt’ results in the below content in t.txt:
“You are ^#1” > t.txt
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Tapan Shah <tapandshah@hpe.com>
When the FilePattern is similar to "fsx:EFI\BOOT", FindFiles()
cannot handle it correctly because it always assumes there is
"\\" after "fsx:".
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Tapan Shah <tapandshah@hpe.com>
It should shows files in root directory of current map.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Tapan Shah <tapandshah@hpe.com>
Commit 9168df3dea
"ShellPkg/ShellProtocol.c: Handle memory allocation failure"
only keeps the protocol clean up in CleanUpShellProtocol() and
creates a new function CleanUpShellEnvironment() which calls
CleanUpShellProtocol(), then unregisters the hotkey callback.
But the commit forgot to change the Shell.c to call
CleanUpShellEnvironment() which causes the hotkey callback is
not unregistered while the callback function doesn't exist
when Shell exits.
This causes system hang when pressing CTRL+C after exiting shell.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
And add Shell prefix to the two library APIs.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
1) RunSplitCommand() allocates the initial SplitStdOut via
CreateFileInterfaceMem(). Free SplitStdIn after the swap to fix
the memory leak.
2) In RunSplitCommand(), SplitStdOut is checked for equality with
StdIn. This cannot happen due to the if-check within the swap.
Hence remove it.
3) UefiMain() doesn't free SplitList. Delete all list entries and
reinitialize the list when in DEBUG. This does not include the
CreateFileInterfaceMem()-allocated SplitStd mentioned in 1), so
keep the ASSERT() until resolved.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
The EFI_UNICODE_COLLATION_PROTOCOL can have two different GUIDs.
Look for both to support more UEFI implementations.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
If 'ReadKeyStroke' function return EFI_NOT_READY then skip it.
If the return value is EFI_DEVICE_ERROR clean the currentString buffer.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Pedroa Liu <pedroa.liu@insyde.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
UEFI Shell 2.x cannot recognize whether a .EFI file is an application or
a driver. This means when we typed in a driver image in Shell command
line, Shell will load the driver image and try to run the entry point
function of the driver.
This patch check the ImageCodeType to fix the issue.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
the performance.
Currently UEFI Shell reads variable storage to get the environment
variables every time running a new command. And reading(writing)
UEFI variables is a high cost operation on most platforms. In order
to enhance the performance this patch read the variable storage once
and cache the environment variables in memory. Every further 'set'
command will save the variable not only to Shell cache, but also the
flash variable storage.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by:Ruiyu Ni <ruiyu.ni@intel.com>
The BuildOptions for AARCH64 in Application/Shell/Shell.inf only affect
the core Shell binary, and not the Shell component libraries which are
merged into the final Shell binary via NULL library class resolution.
This means we need to override the UEFI_APPLICATION build options in
the platform .DSC anyway, there is no point in setting these options
here as well. So remove them.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This patch makes Shell support -nonesting invocation option. This option
specifies that EFI_SHELL_PROTOCOL.Execute API nesting of a new Shell
instance is optional and dependent on the 'nonesting' Shell environment
variable.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Jim Dailey <Jim_Dailey@Dell.com>
Use DOS format end of line(CR, LF).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
If data of any real size were to be piped from one command to another,
an inordinate amount of time could be taken up by reallocating memory
that is only 10 bytes bigger than what is currently needed. Also, this
could cause unwelcome memory fragmentation.
Added a define to control how much memory is reallocated beyond that
which is currently needed. Set it to 1K vs. the original 10 bytes.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jim Dailey <jim_dailey@dell.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The shell uses the memory file structure to manage temporary files in
memory that support piping of output from one command into the the
input of another command. The BufferSize member is the size of the
internal buffer, not the size of the data that was written to the
file. So, it was possible to read beyond the EOF of these files as
reads used BufferSize. Now FileSize tracks the actual size of these
files (the number of bytes written, not the number of bytes available
in the buffer), and the reads use this member.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jim Dailey <jim_dailey@dell.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
If the BOM is stripped from StdIn, then an app that duplicates StdIn
will not be able to duplicate, say, a UCS2 file that was piped into
it (the output file it creates would not start with a BOM).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jim Dailey <jim_dailey@dell.com>
Reviewed-by: Jaben Carsey <Jaben.Carsey@intel.com>
UEFI Shell scandalizes the help message in spec level so that a standalone
UEFI shell application can never get "-?" switch, instead the Shell core
(interpreter) detects the "-?" and finds .MAN file for that shell
application in certain spec defined paths, then show the help extracted
from that .MAN file.
But it means distributing a UEFI shell application not only means
distributing a .EFI file but also distributing a .MAN file. If the text
formatted .MAN file is corrupted (edited by user by mistake), or is
missing (deleted by user by mistake), no help will be shown to user.
So this patch enhance the Shell to make it support finding help message
imbedded in resource section of application image.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
The pointer 'FileInterface->Buffer' returned from 'AllocateZeroPool' in function
'CreateFileInterfaceMem' may be NULL and will be dereferenced at the following code.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Fix various errors when piping a UNICODE or ASCII file to a simple shell application that reads standard input and writes it to standard output.
1) When the memory file is created by CreateFileInferfaceMem() to capture the pipe output, no UNICODE BOM is written to the memory file. Later, when the memory file is read by the application using ShellFileHandleReadLine(), the function indicates that the file is ASCII because there is no BOM.
2) If the file is piped as ASCII, the ASCII memory image is not correctly created by FileInterfaceMemWrite() as each ASCII character is followed by '\0' in the image (when the ASCII data is written to the memory image, the file position should only be incremented by half the buffer size).
3) ShellFileHandleReadLine() does not read ASCII files correctly (writes to Buffer need to be cast as CHAR8*).
4) FileInterfaceMemRead() and FileInterfaceMemWrite() as somewhat hard to read and difficult to debug with certain tools due to the typecasting of This. Added a local variable (MemFile) of the correct type to these functions and used it instead of This.
Enhancement: ShellFileHandleReadLine() now returns EFI_END_OF_FILE when appropriate.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jim Dailey <jim_dailey@dell.com>
reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
When we run following script in Shell:
"
for %a run (1 200)
echo %a
memmap
endfor
"
We may find memory leak in system. This patch free buffer in 'BufferToFreeList' to avoid this issue.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19521 6f19259b-4bc3-4df7-8a09-765794883524
Add the PCD to PcdShellMaxHistoryCommandCount indicate the max count of history commands.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19520 6f19259b-4bc3-4df7-8a09-765794883524
This patch fixes the following compile error under GCC 5.3.1:
/home/pcacjr/work/edk2.git/ShellPkg/Application/Shell/ShellManParser.c:
In function 'IsTitleHeader':
/home/pcacjr/work/edk2.git/ShellPkg/Application/Shell/ShellManParser.c:502:5:
error: enumeration value 'Final' not handled in switch [-Werror=switch]
switch (State) {
^
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Paulo Alcantara <paulo.alc.cavalcanti@hp.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19304 6f19259b-4bc3-4df7-8a09-765794883524
Prior to this change, the shell would not use a MAN file if the Title Header line was not strictly formatted.
For example, if the case of the command name in the file was not exactly the same as the case of the command name as typed by the user,
the MAN file would not be used. Also, extra whitespace on the line would also cause the shell to ignore the MAN file.
This change allows "extra" white space and ignores case when looking for the command name.
It also ignores any path information for cases where the user enters a relative or absolute path to the EFI file.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jim Dailey <jim_dailey@dell.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19290 6f19259b-4bc3-4df7-8a09-765794883524
When the FvSimpleFileSystemDxe module is included in a platform,
Simple File System Protocols are produced for firmware volumes(FV)
that do not have the same style device paths as file systems with
file names. The ShellPkg has an assumption that the device path
contains device path nodes of type MEDIA_FILEPATH_DP and generates
an ASSERT() if any other device path nodes are encountered. This
change removes the ASSERT() condition and instead returns NULL that
means EfiShellGetFilePathFromDevicePath() can not convert the
device path nodes that represent the file path to a Unicode string.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19228 6f19259b-4bc3-4df7-8a09-765794883524
Ruiyu Ni
Laszlo Ersek
Chen A Chen
Cinnamon Shia
Tapan Shah
Dandan Bi
Marvin H?user
Pedroa Liu
Jaben Carsey
Qiu Shumin
Liming Gao
Ard Biesheuvel
Jim_Dailey@Dell.com
Yao Jiewen
Paulo Alcantara
Michael Kinney
Jordan Justen