Currently the console is connected before EndOfDxe causing OptionsROMs
to be loaded, but their drivers aren't used and thus no GOP is installed.
To make use of 3rdparty OptionROMs connect the console after EndOfDxe.
Tested on Intel CFL board using Nvidia Quadro GPU.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
The PciLib depends on PCDs
- PcdPciExpressBaseAddress
- PcdPciExpressBaseSize
being updated by BlSupportDxe before MMCONF accesses are working.
Add BlSupportDxe to APRIORI to start it first and get the system into
an usable state where at least PCI accesses work reliable.
Fixes a bug where BlSupportDxe is scheduled too late and other DXEs fail
to load due to broken PCI access.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
A subsequent patch in the series will make the
ShellPkg/Library/UefiShellCommandLib/UefiShellCommandLib.inf
instance dependent on the OrderedCollectionLib class. Because the shell
binary in this platform consumes the above UefiShellCommandLib instance,
resolve OrderedCollectionLib.
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Guo Dong <guo.dong@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3151
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20210113085453.10168-6-lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3100
It is not necessary to have a PEI phase in the UEFI payload since no
specific PEI task is required. This patch adds a UefiPayloadEntry
driver to get UEFI Payload required information from the bootloaders,
convert them into a HOB list, load DXE core and transfer control to it.
Here is the change details:
1) Removed PEI phase, including Peicore, BlSupportPei, SecCore, etc.
2) Added UefiPayloadEntry driver. this is the only driver before DXE core.
3) Added Pure X64 support, dropped Pure IA32 (Could add later if required)
64bit payload with 32bit entry point is still supported.
4) Use one DSC file UefiPayloadPkg.dsc to support X64 and IA32X64 build.
Removed UefiPayloadIa32.dsc and UefiPayloadIa32X64.dsc
Tested with SBL and coreboot on QEMU.
Signed-off-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Benjamin You <benjamin.you@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2522
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Guo Dong <guo.dong@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Bret Barkelew <brbarkel@microsoft.com>
Signed-off-by: Bret Barkelew <brbarkel@microsoft.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
The default size is still 256MiB, but will be overwritten by
UefiPayloadPkg with the real MMCONF size.
e.g.: On embedded AMD platforms the MMCONF window size is usually
only 64MiB.
Fixes crash on platforms not exposing 256 buses.
Tested on:
* AMD Stoney Ridge
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Marcello Sylvester Bauer <marcello.bauer@9elements.com>
Cc: Patrick Rudolph <patrick.rudolph@9elements.com>
Cc: Christian Walter <christian.walter@9elements.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Store the real size of the Pcie Memory Mapped Address Space.
This change is necessary to support variable size of MMCONF spaces.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Marcello Sylvester Bauer <marcello.bauer@9elements.com>
Cc: Patrick Rudolph <patrick.rudolph@9elements.com>
Cc: Christian Walter <christian.walter@9elements.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Guo Dong <guo.dong@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
The BaseSerialPortLib16550 does fallback to a fixed address UART defined
by PcdSerialRegisterBase and does not initialize if it is zero. Do not
assume a serial port at 0x3F8, otherwise it could cause errors during
initialization of a non-existent serial port on non legacy platforms.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Marcello Sylvester Bauer <marcello.bauer@9elements.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Various CpuExceptionHandlerLib libraries will updated to use the new
VmgExitLib library. To prevent any build breakage, update the
UefiPayloadPkg DSC files that use a form of the CpuExceptionHandlerLib
library to include the VmgExitLib library.
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Guo Dong <guo.dong@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
This patch fixed the merge issue for the previous TerminalDxe patch.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Marcello Sylvester Bauer <marcello.bauer@9elements.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
As the TerminalDxe significantly slows down the boot menu rendering,
add the DISABLE_SERIAL_TERMINAL option to disable it at build time.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Marcello Sylvester Bauer <marcello.bauer@9elements.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
When build UEFI payload using NOOPT, it would build failure since
the FV size. So this patch increases FV size to support NOOPT.
If not NOOPT build, there is no change to FV size.
Signed-off-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Today's UefiPayloadPkg always uses 0xE0000000 as the PCIE base address
and ignores the value set in AcpiBoardInfo HOB created by the boot
loader. This makes the payload binary cannot work in environment
where the PCIE base address set by boot loader doesn't equal to
0xE0000000.
The patch enhances UefiPayloadPkg so that the PCIE base address
set by boot loader in the AcpiBoardInfo HOB is used.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2786
Since the type of PcdStatusCodeUseSerial and PcdStatusCodeUseMemory
in MdeModulePkg.dec are changed, so change them from
PcdsFeatureFlag to PcdsFixedAtBuild in dsc files.
Cc: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Signed-off-by: Ming Tan <ming.tan@intel.com>
EnterS3WithImmediateWake () no longer has any callers, so remove it
from ResetSystemLib.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Add PS2 keyboard support.
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2316
This patch adds PS2 keyboard support in boot manager, and
add a build flag PS2_KEYBOARD_ENABLE for PS2 keyboard to
build PS2 keyboard driver and SIO driver. Be default the
build flag is not enabled since PS2 keyboard is not common
used. could use -DPS2_KEYBOARD_ENABLE to enable build it
if need this feature.
Signed-off-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Benjamin You <benjamin.you@intel.com>
The last parameter of ReserveResourceInGcd() is "ImageHandle", forwarded
in turn to gDS->AllocateMemorySpace() or gDS->AllocateIoSpace() as "owner"
image handle.
But BlDxeEntryPoint() passes "SystemTable" as "ImageHandle".
Compilers have not flagged it because EFI_HANDLE (the type of
"ImageHandle") is unfortunately specified as (VOID*), and
(EFI_SYSTEM_TABLE*) converts to (VOID*) silently.
Hand the entry point function's "ImageHandle" parameter to
ReserveResourceInGcd(). This fixes an actual bug.
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Guo Dong <guo.dong@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
(This patch is unrelated to the rest of this series; its purpose is to
enable building the UefiPayloadPkg DSC files with GCC.)
When building "UefiPayloadPkg/UefiPayloadPkgIa32.dsc" with GCC48 for the
DEBUG target, the compiler reports that "Entry32" may be used
uninitialized in ParseAcpiInfo(), in the XSDT branch.
Code inspection proves the compiler right. In the XSDT branch, the code
from the RSDT branch must have been duplicated, and "Entry32" references
were replaced with "Entry64" -- except where "MmCfgHdr" is assigned.
Fix this bug by introducing a helper variable called "Signature", so that
we have to refer to "Entry32" or "Entry64" only once per loop body.
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Guo Dong <guo.dong@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Since legacy PIC 8259 driver would be removed from edk2,
update UEFI payload to remove 8259 driver.
If required, bootloader could disable 8259.
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Signed-off-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
EDKII_SERIAL_PORT_LIB_VENDOR_GUID is now defined in MdeModulePkg,
simply use it.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20190606131459.1464-5-anthony.perard@citrix.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
This reverts commit a1539c4695.
This change will be pushed after edk2-stable201905
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Guo Dong <guo.dong@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Since legacy PIC 8259 driver would be removed from edk2,
update UEFI payload to remove 8259 driver.
If required, bootloader could disable 8259.
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Signed-off-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
CorebootModulePkg and CorebootPayloadPkg originally supports coreboot only.
In order to support other bootloaders, such as Slim Bootloader, they need
be updated to be more generic.
UEFI Payload (UefiPayloadPkg) a converged package from CorebootModulePkg
and CorebootPayloadPkg with following updates:
a. Support both coreboot and Slim Bootloader
b. Removed SataControllerDxe and BaseSerialPortLib16550 to use EDK2 modules
c. Support passing bootloader parameter to UEFI payload, e.g. coreboot
table from coreboot or HOB list from Slim Bootloader
d. Using GraphicsOutputDxe from EDK2 with minor change instead of FbGop
e. Remove the dependency to IntelFrameworkPkg and IntelFrameworkModulePkg
and QuarkSocPkg
f. Use BaseDebugLibSerialPort library as DebugLib
g. Use HPET timer, drop legacy 8254 timer support
h. Use BaseXApicX2ApicLib instead of BaseXApicLib
i. Remove HOB gUefiFrameBufferInfoGuid to use EDK2 graphics HOBs.
j. Other clean ups
On how UefiPayloadPkg could work with coreboot/Slim Bootloader, please
refer UefiPayloadPkg/BuildAndIntegrationInstructions.txt
Once UefiPayloadPkg is checked-in, CorebootModulePkg and CorebootPayloadPkg
could be retired.
Signed-off-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Guo Dong
Laszlo Ersek
Bret Barkelew
Marcello Sylvester Bauer
Patrick Rudolph
Tom Lendacky
Ray Ni
Tan, Ming
Ard Biesheuvel
Dong, Guo
Anthony PERARD
Liming Gao