Lack of these braces causes build errors when -Wno-missing-braces is
absent. Spelling out more braces also helps understanding the code.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15586 6f19259b-4bc3-4df7-8a09-765794883524
The fw_cfg file "etc/acpi/tables" is not a stable guest interface -- QEMU
could rename it in the future, and/or introduce additional fw_cfg files
with ACPI payload. Only the higher-level "etc/table-loader" file is
considered stable, which contains a sequence of commands to assist
firmware with reading QEMU ACPI tables from the FwCfg interface.
Because edk2 provides publishing support for ACPI tables, OVMF only uses
the Allocate command to find the names of FwCfg files to read and publish
as ACPI tables.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15574 6f19259b-4bc3-4df7-8a09-765794883524
In one of the next patches we'll start scanning all fw_cfg files that QEMU
advertises as carrying ACPI tables, not just "etc/acpi/tables".
The RSD PTR table is known to occur in the "etc/acpi/rsdp" fw_cfg file.
Since edk2 handles RSD PTR automatically, similarly to RSDT and XSDT,
let's exclude RSD PTR too from the manually installed tables.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15573 6f19259b-4bc3-4df7-8a09-765794883524
Split InstallQemuLinkedTables() in two:
- the function now takes the name of the fw_cfg file (from which ACPI
tables are to be extracted) as a parameter,
- the new function InstallAllQemuLinkedTables() calls the former with
fw_cfg file names, and cumulatively tracks the ACPI tables installed by
all invocations of the former.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15572 6f19259b-4bc3-4df7-8a09-765794883524
Names of firmware configuration files always take 56 bytes (including at
least one terminating NUL byte). Expose this constant to all consumers of
QemuFwCfgLib because further interfaces may depend on it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15571 6f19259b-4bc3-4df7-8a09-765794883524
Locate QEMU SMBIOS data in fw_cfg and install it via the
SMBIOS protocol.
Starting with qemu-2.1, on pc/x86 machines of type >= 2.1, full
SMBIOS tables are generated and inserted into fw_cfg (i.e., no
per-field patching of locally generated structures is required).
Aside from new code to extract a SMBIOS blob from fw_cfg, this
patch utilizes the pre-existing infrastructure (already used by
Xen) to handle final SMBIOS table creation.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15542 6f19259b-4bc3-4df7-8a09-765794883524
The SMBIOS specification requires some structure types to
contain reference fields to other structures' handles. When
InstallAllStructures() rebuilds the SMBIOS tables by traversing
an existing source table, the use of SMBIOS_HANDLE_PI_RESERVED
causes automatically generated, arbitrary handle numbers to be
assigned to each cloned structure. This causes all reference
handle fields to become invalid.
This patch modifies InstallAllStructures() to reuse the original
handle numbers supplied by the underlying VM, preserving the
correctness of any included handle references.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Anthony PERARD <anthony.perard@citrix.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15541 6f19259b-4bc3-4df7-8a09-765794883524
The Windows 2008 R2 SP1 (and Windows 7) UEFI guest's default video driver
dereferences the real mode Int10h vector, loads the pointed-to handler
code, and executes what it thinks to be VGA BIOS services in an internal
real-mode emulator. Consequently, video mode switching doesn't work in
Windows 2008 R2 SP1 when it runs on the pure UEFI build of OVMF, making
the guest uninstallable.
This patch adds a VGABIOS "shim" to QemuVideoDxe. For the first stdvga or
QXL card bound, an extremely stripped down VGABIOS imitation is installed
in the C segment. It provides a real implementation for the few services
that are in fact necessary for the win2k8r2sp1 UEFI guest, plus some fakes
that the guest invokes but whose effect is not important.
The C segment is not present in the UEFI memory map prepared by OVMF. We
never add memory space that would cover it (either in PEI, in the form of
memory resource descriptor HOBs, or in DXE, via gDS->AddMemorySpace()).
This way the handler body is invisible to all non-buggy UEFI guests, and
the rest of edk2.
The Int10h real-mode IVT entry is covered with a Boot Services Code page,
making that too unaccessible to the rest of edk2. (Thus UEFI guest OSes
different from the Windows 2008 family can reclaim the page. The Windows
2008 family accesses the page at zero regardless of the allocation type.)
The patch is the result of collaboration:
Initial proof of concept IVT entry installation and handler skeleton (in
NASM) by Jordan Justen.
Service tracing and implementation, data collection/analysis, and C coding
by yours truly.
Last minute changes by Gerd Hoffmann:
- Use OEM mode number (0xf1) instead of standard 800x600 mode (0x143). The
resolution of the OEM mode (0xf1) is not standardized; the guest can't
expect anything from it in advance.
- Use 1024x768 rather than 800x600 for more convenience in the Windows
2008 R2 SP1 guest during OS installation, and after normal boot until
the QXL XDDM guest driver is installed.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15540 6f19259b-4bc3-4df7-8a09-765794883524
OVMF's SecMain is unique in the sense that it links against the following
two libraries *in combination*:
- IntelFrameworkModulePkg/Library/LzmaCustomDecompressLib/
LzmaCustomDecompressLib.inf
- MdePkg/Library/BaseExtractGuidedSectionLib/
BaseExtractGuidedSectionLib.inf
The ExtractGuidedSectionLib library class allows decompressor modules to
register themselves (keyed by GUID) with it, and it allows clients to
decompress file sections with a registered decompressor module that
matches the section's GUID.
BaseExtractGuidedSectionLib is a library instance (of type BASE) for this
library class. It has no constructor function.
LzmaCustomDecompressLib is a compatible decompressor module (of type
BASE). Its section type GUID is
gLzmaCustomDecompressGuid == EE4E5898-3914-4259-9D6E-DC7BD79403CF
When OVMF's SecMain module starts, the LzmaCustomDecompressLib constructor
function is executed, which registers its LZMA decompressor with the above
GUID, by calling into BaseExtractGuidedSectionLib:
LzmaDecompressLibConstructor() [GuidedSectionExtraction.c]
ExtractGuidedSectionRegisterHandlers() [BaseExtractGuidedSectionLib.c]
GetExtractGuidedSectionHandlerInfo()
PcdGet64 (PcdGuidedExtractHandlerTableAddress) -- NOTE THIS
Later, during a normal (non-S3) boot, SecMain utilizes this decompressor
to get information about, and to decompress, sections of the OVMF firmware
image:
SecCoreStartupWithStack() [OvmfPkg/Sec/SecMain.c]
SecStartupPhase2()
FindAndReportEntryPoints()
FindPeiCoreImageBase()
DecompressMemFvs()
ExtractGuidedSectionGetInfo() [BaseExtractGuidedSectionLib.c]
ExtractGuidedSectionDecode() [BaseExtractGuidedSectionLib.c]
Notably, only the extraction depends on full-config-boot; the registration
of LzmaCustomDecompressLib occurs unconditionally in the SecMain EFI
binary, triggered by the library constructor function.
This is where the bug happens. BaseExtractGuidedSectionLib maintains the
table of GUIDed decompressors (section handlers) at a fixed memory
location; selected by PcdGuidedExtractHandlerTableAddress (declared in
MdePkg.dec). The default value of this PCD is 0x1000000 (16 MB).
This causes SecMain to corrupt guest OS memory during S3, leading to
random crashes. Compare the following two memory dumps, the first taken
right before suspending, the second taken right after resuming a RHEL-7
guest:
crash> rd -8 -p 1000000 0x50
1000000: c0 00 08 00 02 00 00 00 00 00 00 00 00 00 00 00 ................
1000010: d0 33 0c 00 00 c9 ff ff c0 10 00 01 00 88 ff ff .3..............
1000020: 0a 6d 57 32 0f 00 00 00 38 00 00 01 00 88 ff ff .mW2....8.......
1000030: 00 00 00 00 00 00 00 00 73 69 67 6e 61 6c 6d 6f ........signalmo
1000040: 64 75 6c 65 2e 73 6f 00 00 00 00 00 00 00 00 00 dule.so.........
vs.
crash> rd -8 -p 1000000 0x50
1000000: 45 47 53 49 01 00 00 00 20 00 00 01 00 00 00 00 EGSI.... .......
1000010: 20 01 00 01 00 00 00 00 a0 01 00 01 00 00 00 00 ...............
1000020: 98 58 4e ee 14 39 59 42 9d 6e dc 7b d7 94 03 cf .XN..9YB.n.{....
1000030: 00 00 00 00 00 00 00 00 73 69 67 6e 61 6c 6d 6f ........signalmo
1000040: 64 75 6c 65 2e 73 6f 00 00 00 00 00 00 00 00 00 dule.so.........
The "EGSI" signature corresponds to EXTRACT_HANDLER_INFO_SIGNATURE
declared in
MdePkg/Library/BaseExtractGuidedSectionLib/BaseExtractGuidedSectionLib.c.
Additionally, the gLzmaCustomDecompressGuid (quoted above) is visible at
guest-phys offset 0x1000020.
Fix the problem as follows:
- Carve out 4KB from the 36KB gap that we currently have between
PcdOvmfLockBoxStorageBase + PcdOvmfLockBoxStorageSize == 8220 KB
and
PcdOvmfSecPeiTempRamBase == 8256 KB.
- Point PcdGuidedExtractHandlerTableAddress to 8220 KB (0x00807000).
- Cover the area with an EfiACPIMemoryNVS type memalloc HOB, if S3 is
supported and we're not currently resuming.
The 4KB size that we pick is an upper estimate for
BaseExtractGuidedSectionLib's internal storage size. The latter is
calculated as follows (see GetExtractGuidedSectionHandlerInfo()):
sizeof(EXTRACT_GUIDED_SECTION_HANDLER_INFO) + // 32
PcdMaximumGuidedExtractHandler * (
sizeof(GUID) + // 16
sizeof(EXTRACT_GUIDED_SECTION_DECODE_HANDLER) + // 8
sizeof(EXTRACT_GUIDED_SECTION_GET_INFO_HANDLER) // 8
)
OVMF sets PcdMaximumGuidedExtractHandler to 16 decimal (which is the
MdePkg default too), yielding 32 + 16 * (16 + 8 + 8) == 544 bytes.
Regarding the lifecycle of the new area:
(a) when and how it is initialized after first boot of the VM
The library linked into SecMain finds that the area lacks the signature.
It initializes the signature, plus the rest of the structure. This is
independent of S3 support.
Consumption of the area is also limited to SEC (but consumption does
depend on full-config-boot).
(b) how it is protected from memory allocations during DXE
It is not, in the general case; and we don't need to. Nothing else links
against BaseExtractGuidedSectionLib; it's OK if DXE overwrites the area.
(c) how it is protected from the OS
When S3 is enabled, we cover it with AcpiNVS in InitializeRamRegions().
When S3 is not supported, the range is not protected.
(d) how it is accessed on the S3 resume path
Examined by the library linked into SecMain. Registrations update the
table in-place (based on GUID matches).
(e) how it is accessed on the warm reset path
If S3 is enabled, then the OS won't damage the table (due to (c)), hence
see (d).
If S3 is unsupported, then the OS may or may not overwrite the
signature. (It likely will.) This is identical to the pre-patch status.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15433 6f19259b-4bc3-4df7-8a09-765794883524
In many cases, the second node in /pci@i0cf8/XYZ@DD,FF node is enough
to match a UEFI device path; a typical cases is a NIC that is assigned
from the host to the guest. Add a catch-all case for PCI devices, and
reuse it for NICs since it works well for those too.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15422 6f19259b-4bc3-4df7-8a09-765794883524
VideoDxe is a UEFI_DRIVER, so it has by default a null instance
of PcdLib. It accesses two PCDs that are now dynamic
(gEfiMdeModulePkgTokenSpaceGuid.PcdVideoHorizontalResolution
and gEfiMdeModulePkgTokenSpaceGuid.PcdVideoVerticalResolution).
Similar to r15362 (OvmfPkg: non-null PcdLib instance for
GraphicsConsoleDxe, 2014-03-22), we need to specify a non-null
instance of PcdLib.
This patch unbreaks the CSM VideoDxe module for OvmfPkg.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15421 6f19259b-4bc3-4df7-8a09-765794883524
Recent qemu versions compose all ACPI tables on the host side, according
to the target hardware configuration, and make the tables available to any
guest firmware over fw_cfg.
See version compatibility information below.
The feature moves the burden of keeping ACPI tables up-to-date from boot
firmware to qemu (which is the source of hardware configuration anyway).
This patch adds client code for this feature. Benefits of the
qemu-provided ACPI tables include PCI hotplug for example.
Qemu provides the following three fw_cfg files:
- etc/acpi/rsdp
- etc/acpi/tables
- etc/table-loader
"etc/acpi/rsdp" and "etc/acpi/tables" are similar, they are only kept
separate because they have different allocation requirements in SeaBIOS.
Both of these fw_cfg files contain preformatted ACPI payload.
"etc/acpi/rsdp" contains only the RSDP table, while "etc/acpi/tables"
contains all other tables, concatenated.
The tables in these two fw_cfg files are filled in by qemu, but two kinds
of fields are left incomplete in each table: pointers to other tables, and
checksums (which depend on the pointers).
Qemu initializes each pointer with a relative offset into the fw_cfg file
that contains the pointed-to ACPI table. The final pointer values depend
on where the fw_cfg files, holding the pointed-to ACPI tables, will be
placed in memory by the guest. That is, the pointer fields need to be
"relocated" (incremented) by the base addresses of where "/etc/acpi/rsdp"
and "/etc/acpi/tables" will be placed in guest memory.
This is where the third file, "/etc/table-loader" comes in the picture. It
is a linker/loader script that has several command types:
One command type instructs the guest to download the other two files.
Another command type instructs the guest to increment ("absolutize") a
pointer field (having a relative initial value) in the pointing ACPI
table, present in some fw_cfg file, with the dynamic base address of the
same (or another) fw_cfg file, holding the pointed-to ACPI table.
The third command type instructs the guest to compute checksums over
ranges and to store them.
In edk2, EFI_ACPI_TABLE_PROTOCOL knows about table relationships -- it
handles linkage automatically when a table is installed. The protocol
takes care of checksumming too. RSDP is installed automatically. Hence we
only need to care about the "etc/acpi/tables" fw_cfg file, determining the
boundaries of each ACPI table inside it, and installing those tables.
Qemu compatibility information:
--------------+---------------------+-------------------------------------
qemu version | qemu machine type | effects of the patch
--------------+---------------------+-------------------------------------
up to 1.6.x | any pc-i440fx | None. OVMF's built-in ACPI tables
| | are used.
--------------+---------------------+-------------------------------------
any | up to pc-i440fx-1.6 | None. OVMF's built-in ACPI tables
| | are used.
--------------+---------------------+-------------------------------------
1.7.0 | pc-i440fx-1.7 | Potential guest OS crash, dependent
| (default for 1.7.0) | on guest RAM size.
| |
| | DO NOT RUN OVMF on the (1.7.0,
| | pc-i440fx-1.7) qemu / machine type
| | combination.
--------------+---------------------+-------------------------------------
1.7.1 | pc-i440fx-1.7 | OVMF downloads valid ACPI tables
| (default for 1.7.1) | from qemu and passes them to the
| | guest OS.
--------------+---------------------+-------------------------------------
2.0.0-rc0 | pc-i440fx-1.7 or | OVMF downloads valid ACPI tables
| later | from qemu and passes them to the
| | guest OS.
-------------+---------------------+-------------------------------------
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15420 6f19259b-4bc3-4df7-8a09-765794883524
The previous patch ensures that the LockBox is protected during DXE (but
the OS can still drop it) if S3 is unsupported or disabled. However, S3
related drivers not only save data in the lockbox, they allocate objects
with Reserved and AcpiNVS memory types too, which the OS can't (must not)
release. This is a waste when S3 is unsupported or disabled.
In OVMF a good "choke point" for these drivers is the entry point of
AcpiS3SaveDxe. The messages of the following commits are relevant to the
data and control flow:
- SVN r15290 (git commit 8f5ca05b)
- SVN r15305 (git commit 5a217a06)
- SVN r15306 (git commit d4ba06df)
Prevent AcpiS3SaveDxe from loading when S3 is unsupported or disabled.
This should keep away (most of the) dependent drivers too.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Matt Fleming <matt.fleming@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15419 6f19259b-4bc3-4df7-8a09-765794883524
If (mBootMode == BOOT_ON_S3_RESUME) -- that is, we are resuming --, then
the patch has no observable effect.
If (mBootMode != BOOT_ON_S3_RESUME && mS3Supported) -- that is, we are
booting or rebooting, and S3 is supported), then the patch has no
observable effect either.
If (mBootMode != BOOT_ON_S3_RESUME && !mS3Supported) -- that is, we are
booting or rebooting, and S3 is unsupported), then the patch effects the
following two fixes:
- The LockBox storage is reserved from DXE (but not the OS). Drivers in
DXE may save data in the LockBox regardless of S3 support, potentially
corrupting any overlapping allocations. Make sure there's no overlap.
- The LockBox storage is cleared. A LockBox inherited across a non-resume
reboot, populated with well-known GUIDs, breaks drivers that want to
save entries with those GUIDs.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Matt Fleming <matt.fleming@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15418 6f19259b-4bc3-4df7-8a09-765794883524
Establish the full stack of conversions when modifying the platform
configuration:
ConfigResp -- form engine / HII communication
|
[ConfigToBlock]
|
v
MAIN_FORM_STATE -- binary representation of form/widget state
|
[FormStateToPlatformConfig]
|
v
PLATFORM_CONFIG -- accessible to DXE and UEFI drivers
|
[PlatformConfigSave]
|
v
UEFI non-volatile variable -- accessible to external utilities
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15375 6f19259b-4bc3-4df7-8a09-765794883524
Establish the full stack of conversions in retrieving the platform
configuration:
MultiConfigAltResp -- form engine / HII communication
^
|
[BlockToConfig]
|
MAIN_FORM_STATE -- binary representation of form/widget state
^
|
[PlatformConfigToFormState]
|
PLATFORM_CONFIG -- accessible to DXE and UEFI drivers
^
|
[PlatformConfigLoad]
|
UEFI non-volatile variable -- accessible to external utilities
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15374 6f19259b-4bc3-4df7-8a09-765794883524
The RouteConfig() function is also called now as expected.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15373 6f19259b-4bc3-4df7-8a09-765794883524
Generate the options for the drop-down list from the GOP resolutions.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15372 6f19259b-4bc3-4df7-8a09-765794883524
If Start() succeeds, the callback is only executed when the setup is
complete (on the stack of RestoreTPL()), rather than on the stack of
InstallMultipleProtocolInterfaces(), when the driver setup may yet be
theoretically incomplete.
If Start() fails, the protocol interface will have been uninstalled
(rolled back) by the time the callback runs (again, on the stack of
RestoreTPL()). Since protocol notification callbacks begin with locating
the protocol interface in question, such attempts to locate will fail
immediately and save some work in the callback.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15371 6f19259b-4bc3-4df7-8a09-765794883524
In this patch we populate the form with the two widgets related to video
resolution:
- A read-only string field displaying the preference for the next boot.
- A drop-down list offering choices for changing the setting. This list is
implemented with dynamically generated IFR opcodes.
(In general, the current preference may be missing, or it may be invalid
for the available video RAM size. The list of possible new settings is
filtered with the video RAM size.)
Because the form now becomes able to receive input, we must also implement
ExtractConfig(). This function tells the HII engine about the state of the
widgets.
For now we set up both widgets with static data only:
- The current preference always says "Unset". The driver code is still
isolated from the backend (the UEFI variable store).
- The list of possible resolutions offers 800x600 only. We don't
interrogate the GOP yet.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15369 6f19259b-4bc3-4df7-8a09-765794883524
We'll need a C language (ie. structure) representation for the state of
the visual elements on the form. We choose the Buffer Storage kind (see
29.2.5.6 "Storage" in UEFI 2.4A), because it's easy to work with.
Note that the structure added in this patch has nothing to do with UEFI
non-volatile variables.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15368 6f19259b-4bc3-4df7-8a09-765794883524
The GraphicsConsoleDxe driver (in MdeModulePkg/Universal/Console)
determines the preferred video resolution from the dynamic PCDs
- gEfiMdeModulePkgTokenSpaceGuid.PcdVideoHorizontalResolution
- gEfiMdeModulePkgTokenSpaceGuid.PcdVideoVerticalResolution
Setting the graphics resolution during boot is useful when the guest OS
(for lack of a dedicated display driver) continues to work with the
original GOP resolution and framebuffer.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15366 6f19259b-4bc3-4df7-8a09-765794883524
The two functions introduced here allow the saving and loading of platform
configuration to/from the non-volatile variable store.
The PLATFORM_CONFIG structure and the two functions that take it / return
it are generally meant for any DXE or UEFI driver that needs to access
platform configuration. For now we keep this small "library" internal to
PlatformDxe.
The PLATFORM_CONFIG wire format is intended only to grow over time (as
long as the variable GUID remains unchanged). At the introduction of new
fields, new feature flags must be added, and recognized in
PlatformConfigLoad().
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15365 6f19259b-4bc3-4df7-8a09-765794883524
This DXE driver will load/save persistent values for OVMF's config knobs,
plus expose those knobs via HII.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15364 6f19259b-4bc3-4df7-8a09-765794883524
This GUID should become a new "namespace" for UEFI variables that are
specific to OVMF configuration (as opposed to standard UEFI global
variables). We'll also use it as the GUID of the related HII form-set (ie.
the interactive user interface).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15363 6f19259b-4bc3-4df7-8a09-765794883524
GraphicsConsoleDxe (a UEFI_DRIVER under MdeModulePkg/Universal/Console)
determines the preferred video resolution from the dynamic PCDs
- gEfiMdeModulePkgTokenSpaceGuid.PcdVideoHorizontalResolution
- gEfiMdeModulePkgTokenSpaceGuid.PcdVideoVerticalResolution
In one of the next patches, we'd like to change these PCDs. In order for
GraphicsConsoleDxe to retrieve the new values dynamically,
- it must be linked with the non-null instance of PcdLib,
- OvmfPkg must provide dynamic defaults.
We keep MdeModulePkg's 800x600 default resolution. (The UEFI specification
requires video drivers to support 800x600.)
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15362 6f19259b-4bc3-4df7-8a09-765794883524
The Boot#### variables that have become unreferenced in the new BootOrder
variable won't ever be automatically reused for booting. They are
"unreachable" resources that take up room in the variable store. Make an
effort to remove them.
This should plug the leak which, given sufficient reboots, exhausts the
variable store with stale Boot#### variables and renders the VM
unbootable.
Reported-by: Michael Chang <mchang@suse.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15327 6f19259b-4bc3-4df7-8a09-765794883524
When PI can distinguish the "full config" boot mode from "assume no
changes", then the following BDS logic is correct:
if BootMode == BOOT_WITH_FULL_CONFIGURATION:
//
// connect all devices
// create & append each default boot option that's missing
//
BdsLibConnectAll
BdsLibEnumerateAllBootOption
else if BootMode == BOOT_ASSUMING_NO_CONFIGURATION_CHANGES:
//
// just stick with current BootOrder and the Boot#### variables
// referenced by it
//
In theory, the first branch is intended to run infrequently, and the
"assume no changes" branch should run most of the time.
However, some platforms can't tell these two boot modes apart. The
following substitute had been introduced:
//
// Technically, always assume "full config", but the BootMode HOB is
// actually meaningless wrt. to "full config" or "assume no changes".
//
ASSERT (BootMode == BOOT_WITH_FULL_CONFIGURATION);
//
// Key off the existence of BootOrder. Try to prepare an in-memory list
// of boot options, based on BootOrder and the referenced Boot####
// variables.
//
Status = BdsLibBuildOptionFromVar()
//
// If that succeeded, we'll treat it as "assume no changes". If it
// failed (*only* if it failed), we'll build default boot options,
// calling it "full config":
//
if EFI_ERROR(Status):
BdsLibConnectAll()
BdsLibEnumerateAllBootOption(BootOptionList)
What we have now in OVMF is a mixture of the hack, and the behavior that's
theoretically correct for "full config":
- We assert "full config" -- this is OK.
- We call "connect all" and "enumerate all" deliberately -- this is OK
too. It matches "full config" which we assert.
- However, we also have the hack in place, which had been meant as an
alternative.
In order to clean this up, we either need to restore the hack to its
original form (ie. comment out the unconditional calls again), or we ought
to remove the hack altogether.
The unconditional "connect all" + "enumerate all" calls are the correct
approach for OVMF, because we want, in fact, to start with "full config".
The QEMU boot order specification and the set of emulated devices might
change "out of band", which excludes "assume no changes".
In other words, removing the hack corresponds to the "real production"
case that the comment hints at.
Because SetBootOrderFromQemu() may change the BootOrder NvVar, we must
preserve the BdsLibBuildOptionFromVar() function call, in order to
refresh the in-memory list with the new boot priorities.
(The last step of BdsLibEnumerateAllBootOption() is such a call too.)
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15326 6f19259b-4bc3-4df7-8a09-765794883524
This driver (from
"MdeModulePkg/Universal/Acpi/BootScriptExecutorDxe/BootScriptExecutorDxe.inf")
is first loaded normally during DXE. When the
EFI_DXE_SMM_READY_TO_LOCK_PROTOCOL is installed by any DXE driver (purely
as a form of notification), the driver reloads itself to reserved memory.
During S3 Resume / PEI, the driver image is executed from there. In order
to access the boot script saved during S3 Suspend, LockBox access is
needed.
The boot script is transferred internal to PiDxeS3BootScriptLib:
Both S3SaveStateDxe and BootScriptExecutorDxe are statically linked
against PiDxeS3BootScriptLib. Whichever is loaded first (during normal
boot, in the DXE phase), allocates the root storage for the script. The
address is then passed between the PiDxeS3BootScriptLib instances living
in the two separate drivers thru the dynamic
PcdS3BootScriptTablePrivateDataPtr PCD.
Dependencies:
BootScriptExecutorDxe
gEfiLockBoxProtocolGuid [OvmfPkg/AcpiS3SaveDxe]
S3BootScriptLib [PiDxeS3BootScriptLib]
SmbusLib [BaseSmbusLibNull]
LockBoxLib [OvmfPkg/Library/LockBoxLib]
LockBoxLib [OvmfPkg/Library/LockBoxLib]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15307 6f19259b-4bc3-4df7-8a09-765794883524
BootScriptExecutorDxe, to be pulled in in the next patch, was written with
the SMM implementation of LockBox in mind. That implementation is split in
the following three parts:
- client side (DXE/PEI) library,
- SMM driver producing gEfiLockBoxProtocolGuid,
- driver side (SMM) library.
BootScriptExecutorDxe includes the client side LockBoxLib. So that the
library can communicate with the SMM LockBox driver, BootScriptExecutorDxe
has a Depex on gEfiLockBoxProtocolGuid, normally installed by the SMM
LockBox driver. This is actually not a hard dependency, it just ensures
correct load order between BootScriptExecutorDxe and
MdeModulePkg/Universal/LockBox/SmmLockBox.
The (client side) LockBox library instance in OVMF doesn't depend on a
separate driver that produces gEfiLockBoxProtocolGuid. Nothing produces
that GUID right now in OVMF. This prevents BootScriptExecutorDxe from
loading.
Install gEfiLockBoxProtocolGuid in our only S3-specific, custom DXE
driver, in order to enable loading of BootScriptExecutorDxe.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15306 6f19259b-4bc3-4df7-8a09-765794883524
The trigger to actually save the boot script is the installation of
EFI_DXE_SMM_READY_TO_LOCK_PROTOCOL, to be performed by any DXE driver.
Installation of the protocol also locks down SMM (as its name indicates)
and (in theory) prevents further LockBox access.
We cannot install this protocol before BdsLibBootViaBootOption() is called
(eg. in OVMF's PlatformBdsPolicyBehavior()), because
BdsLibBootViaBootOption() calls EFI_ACPI_S3_SAVE_PROTOCOL.S3Save(), which
needs LockBox access.
We also can't install the protocol after BdsLibBootViaBootOption()
returns, simply because control is never returned to us.
Therefore modify our EFI_ACPI_S3_SAVE_PROTOCOL implementation so that the
boot script is prepared and installed internally to S3Save().
(The boot script must contain at least one opcode, otherwise
S3BootScriptLib runs into an assertion failure. We add a harmless (no-op)
"information" opcode.)
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15305 6f19259b-4bc3-4df7-8a09-765794883524
"MdeModulePkg/Universal/Acpi/S3SaveStateDxe/S3SaveStateDxe.inf" produces
the EFI_S3_SAVE_STATE_PROTOCOL which allows creation and saving of an S3
Boot Script, to be replayed in PEI during S3 Resume. The script contains
opcodes and opcode arguments to configure CPU, PCI and IO resources.
S3SaveStateDxe relies on the S3BootScriptLib library. The Null
implementation is not useful for actually saving the boot script, we need
the PiDxeS3BootScriptLib instance.
The PiDxeS3BootScriptLib library instance depends on LockBoxLib,
implemented for OVMF in one of the previous patches.
PiDxeS3BootScriptLib also depends on SmbusLib. For now we opt for the Null
instance of the latter. It means that SMBus commands in the boot script
will have no effect when interpreted during S3 Resume. This should be fine
for OvmfPkg and QEMU.
EFI_S3_SAVE_STATE_PROTOCOL [S3SaveStateDxe]
S3BootScriptLib [PiDxeS3BootScriptLib]
SmbusLib [BaseSmbusLibNull]
LockBoxLib [OvmfPkg/Library/LockBoxLib]
When the EFI_DXE_SMM_READY_TO_LOCK_PROTOCOL is installed by any DXE driver
(purely as a form of notification), the S3SaveStateDxe driver saves the
boot script to EfiACPIMemoryNVS, and links it into the LockBox.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15304 6f19259b-4bc3-4df7-8a09-765794883524
"OvmfPkg/AcpiS3SaveDxe/AcpiS3SaveDxe.inf" (originally:
"IntelFrameworkModulePkg/Universal/Acpi/AcpiS3SaveDxe/AcpiS3SaveDxe.inf")
produces the EFI_ACPI_S3_SAVE_PROTOCOL.
When found, this protocol is automatically invoked by
BdsLibBootViaBootOption(), in file
"IntelFrameworkModulePkg/Library/GenericBdsLib/BdsBoot.c", right before
booting a boot option, to save ACPI S3 context.
At that point during BDS, our AcpiPlatformDxe driver will have installed
the FACS table (which AcpiS3SaveDxe has a use-time dependency upon).
With regard to dependencies: AcpiS3SaveDxe implements
EFI_ACPI_S3_SAVE_PROTOCOL by relying on LockBoxLib.
BdsLibBootViaBootOption()
EFI_ACPI_S3_SAVE_PROTOCOL [AcpiS3SaveDxe]
LockBoxLib [OvmfPkg/Library/LockBoxLib]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
[jordan.l.justen@intel.com: Remove EmuNvramLib]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15303 6f19259b-4bc3-4df7-8a09-765794883524
"IntelFrameworkModulePkg/Universal/Acpi/AcpiS3SaveDxe/AcpiS3SaveDxe.inf"
currently specifies a DepEx on gEfiMpServiceProtocolGuid (MP Services).
The justification is the following code sequence:
InstallAcpiS3Save()
if PcdFrameworkCompatibilitySupport is set:
InstallAcpiS3SaveThunk()
if EFI_MP_SERVICES_PROTOCOL is available:
GetVariable(ACPI_GLOBAL_VARIABLE)
In English, the AcpiS3SaveDxe driver insists on the presence of MP
Services *unconditionally* because,
- if PcdFrameworkCompatibilitySupport is set (the default is false),
- and MP Services are available (which is constant true under the above
condition),
then the AcpiS3SaveDxe driver would like to get the ACPI_GLOBAL_VARIABLE
variable from the MP Services driver, rather than setting it itself.
The DepEx prevents AcpiS3SaveDxe from loading under OvmfPkg, since we
provide no MP Services implementation. This is particularly broken since
the default PcdFrameworkCompatibilitySupport value is FALSE, making the
entire code that would look at EFI_MP_SERVICES_PROTOCOL dead.
Copy AcpiS3SaveDxe to OvmfPkg, substitute PcdFrameworkCompatibilitySupport
with constant FALSE, and remove all code that becomes dead, including the
DepEx.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15302 6f19259b-4bc3-4df7-8a09-765794883524
The S3 suspend/resume infrastructure depends on the LockBox library class.
The edk2 tree currently contains Null and SMM instances. The Null instance
is useless, and the SMM instance would require SMM emulation by including
the SMM core and adding several new drivers, which is deemed too complex.
Hence add a simple LockBoxLib instance for OVMF.
jordan.l.justen@intel.com:
* use PCDs instead of EmuNvramLib
- clear memory in PlatformPei on non S3 boots
* allocate NVS memory and store a pointer to that memory
- reduces memory use at fixed locations
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15301 6f19259b-4bc3-4df7-8a09-765794883524
"UefiCpuPkg/Universal/Acpi/S3Resume2Pei/S3Resume2Pei.inf" produces the
EFI_PEI_S3_RESUME2 PEIM-to-PEIM Interface.
When the platform-specific initialization code (in PEI) sets the Boot Mode
to BOOT_ON_S3_RESUME, the DXE IPL (which is the last step in PEI) skips
the DXE phase entirely, and executes the S3 Resume PEIM through the
EFI_PEI_S3_RESUME2 interface instead. (See DxeLoadCore() in
"MdeModulePkg/Core/DxeIplPeim/DxeLoad.c".)
S3Resume2Pei depends on LockBoxLib.
EFI_PEI_S3_RESUME2 [S3Resume2Pei]
LockBoxLib [OvmfPkg/Library/LockBoxLib]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15300 6f19259b-4bc3-4df7-8a09-765794883524
On S3 resume, we skip decompression of the PEI FV, and expect
to jump directly into it. For this to work, we need the OS to
leave the memory range untouched.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15299 6f19259b-4bc3-4df7-8a09-765794883524
On X64, the reset vector code in
"OvmfPkg/ResetVector/Ia32/PageTables64.asm" identity maps the first 4GB of
RAM for PEI, consuming six frames starting at 8MB.
This range is declared by the PcdOvmfSecPageTablesBase/Size PCDs.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
[jordan.l.justen@intel.com: Move to MemDetect.c; use PCDs]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15298 6f19259b-4bc3-4df7-8a09-765794883524
Since we marked the FV at PcdOvmfPeiMemFvBase as ACPI NVS memory,
we can use it on S3 resume.
The FV at PcdOvmfDxeMemFvBase may have been overwritten by the OS,
but we do not use it's contents on S3 resume.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15296 6f19259b-4bc3-4df7-8a09-765794883524
We will not be running DXE on S3 resume, so we don't
need to do these initialization items:
* Reserve EMU Variable memory range
* Declare Firmware volumes
* Add memory HOBs
v5:
* Move MiscInitialization back to running on S3 resume
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15295 6f19259b-4bc3-4df7-8a09-765794883524
This 32k section of RAM will be declared to the PEI Core on
S3 resume to allow memory allocations during S3 resume PEI.
If the boot mode is BOOT_ON_S3_RESUME, then we publish
the pre-reserved PcdS3AcpiReservedMemory range to PEI.
If the boot mode is not BOOT_ON_S3_RESUME, then we reserve
this range as ACPI NVS so the OS will not use it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15294 6f19259b-4bc3-4df7-8a09-765794883524
QEMU indicates whether S3 is supported or not in the
fw-cfg interface.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15293 6f19259b-4bc3-4df7-8a09-765794883524
Such a packaged query function will come in handy in the following
patches.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
[jordan.l.justen@intel.com: check for enabled rather than disabled]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15292 6f19259b-4bc3-4df7-8a09-765794883524
Gao, Liming
Laszlo Ersek
Gabriel Somlo
Paolo Bonzini
Jordan Justen