This patch updated final event log calculation based on
TCG EFI PROTOCOL rev9, 7.1.2 "All options implementation".
The previous logic is to save event to final event log
once GetEventLog() is called. 7.1.1 shows that we should
save event log to both normal even log area and final event
log area after GetEventLog() is called.
And there is no need to record TCG12 format log to final
event log area, and normal event log area can be BootServices
memory because OS will not access it directly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Zhang, Chao B" <chao.b.zhang@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19661 6f19259b-4bc3-4df7-8a09-765794883524
Previously, NumberOfPCRBanks is calculated based on TPM
capability. However, there might be a case that TPM hardware
support 1 algorithm, but BIOS does not support and BIOS
mask it via PCD. This causes the conflict between
HashAlgorithmBitmap and NumberOfPCRBanks.
So we move the NumberOfPCRBanks calculation based on
HashAlgorithmBitmap to make sure the data is consistent.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Zhang, Chao B" <chao.b.zhang@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19660 6f19259b-4bc3-4df7-8a09-765794883524
ExtractConfig is called many times, so it's not efficient to update Secure Boot STR_SECURE_BOOT_STATE_CONTENT, STR_CUR_SECURE_BOOT_MODE_CONTENT string in ExtractConfig.
As these 2 strings are displayed on one form, always update them when opening the form.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19645 6f19259b-4bc3-4df7-8a09-765794883524
TCG event log and TCG2 final event log area length can be configurable to meet platform event log
requirement.
PcdTcgLogAreaMinLen : 0x10000 based on minimum requirement in TCG ACPI Spec 00.37
PcdTcg2FinalLogAreaLen : 0x8000 based on experience value
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
Reviewed-by: Qin Long <qin.long@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19639 6f19259b-4bc3-4df7-8a09-765794883524
Some commands in Tpm2CommandLib accept AuthSession
as input parameter and copy to local command buffer.
After use, this AuthSession content should be zeroed,
because there might be some secrete there.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Zhang, Chao B" <chao.b.zhang@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19635 6f19259b-4bc3-4df7-8a09-765794883524
Tpm2Startup does not check TPM device return code.
It might cause problem, that error is not detected
in Tcg2Peim, for example, S3 resume case.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Zhang, Chao B" <chao.b.zhang@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19634 6f19259b-4bc3-4df7-8a09-765794883524
The official TCG standard uses Tcg2Protocol, instead of TrEE.
We should update TCG driver to use Tcg2Protocol, too.
TrEE should be used only for old TrEE implementation.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Zhang, Chao B" <chao.b.zhang@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19633 6f19259b-4bc3-4df7-8a09-765794883524
Change TisTpmCommand to Tpm2TisTpmCommand. Makes function name more clear.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <samer.el-haj-mahmoud@hpe.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19622 6f19259b-4bc3-4df7-8a09-765794883524
Debug messages are using a format strings with %s for
a Unicode string, but the strings being printed are
ASCII strings and this results in corrupted debug
messages. Change the the format string to use %a
instead of %s.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19617 6f19259b-4bc3-4df7-8a09-765794883524
Add SecureBoot UI support for Customized SecureBoot Mode transition according to Mantis 1263. User can do secure boot mode transition through UI.
https://mantis.uefi.org/mantis/view.php?id=1263
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Zeng Star <star.zeng@intel.com>
Reviewed-by: Long Qin <qin.long@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19134 6f19259b-4bc3-4df7-8a09-765794883524
Add gEdkiiSecureBootModeGuid definition for Enable Secure Boot feature defined in
UEFI2.5 Mantis 1263. It is a private variable GUID.
https://mantis.uefi.org/mantis/view.php?id=1263
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Zeng Star <star.zeng@intel.com>
Reviewed-by: Long Qin <qin.long@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19132 6f19259b-4bc3-4df7-8a09-765794883524
Some compilers (like RVCT) reject input files that do not end in a
newline. So add missing newlines to some SecurityPkg header files.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19107 6f19259b-4bc3-4df7-8a09-765794883524
If TPM2_Startup(TPM_SU_STATE) to return an error, the system
firmware that resumes from S3 MUST deal with a TPM2_Startup
error appropriately.
For example, issuing a TPM2_Startup(TPM_SU_CLEAR) command and
configuring the device securely by taking actions like extending
a separator with an error digest (0x01) into PCRs 0 through 7.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Zhang, Chao B" <chao.b.zhang@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18760 6f19259b-4bc3-4df7-8a09-765794883524
This is patch to remove smbios measurement in TCG driver. There will be other patch to add it in Smbios driver.
The problem of current SMBIOS measurement is:
1) TCG drivers do not support SMBIOS3.0 table.
2) TCG drivers do not follow TCG platform spec on: "Platform configuration information that is automatically updated,
such as clock registers, and system unique information, such as asset numbers or serial numbers,
MUST NOT be measured into PCR [1], or any other PCR."
So we decide to move Smbios measurement from TCG drivers to Smbios driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Zhang, Chao B" <chao.b.zhang@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18677 6f19259b-4bc3-4df7-8a09-765794883524
Previous TCG2 configuration UI always add all TCG defined hash algorithm to let user select which one need be used.
This brings risk that user might select unsupported hash, and selection is rejected later.
So we enhance to UI to hide unsupported hash algorithm.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Zhang, Chao B" <chao.b.zhang@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18676 6f19259b-4bc3-4df7-8a09-765794883524
This issue causes section extraction overrun and possible hang due to bad output size calculation.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Cohen, Eugene" <eugene@hp.com>
Reviewed-by: "Zhang, Chao B" <chao.b.zhang@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18625 6f19259b-4bc3-4df7-8a09-765794883524
PcdSet## has no error status returned, then the caller has no idea about whether the set operation is successful or not.
PcdSet##S were added to return error status and PcdSet## APIs were put in ifndef DISABLE_NEW_DEPRECATED_INTERFACES condition.
To adopt PcdSet##S and further code development with DISABLE_NEW_DEPRECATED_INTERFACES defined, we need to Replace PcdSet## usage with PcdSet##S.
Normally, DynamicDefault PCD set is expected to be success, but DynamicHii PCD set failure is a legal case.
PcdTpmInitializationPolicy/PcdTcg2HashAlgorithmBitmap/PcdTpm2HashMask/PcdTpmInstanceGuid all have set operation in PEI phase,
PEI phase does not allow DynamicHii PCD set, so DynamicDefault is expected for them and use PcdSet##S to instead of PcdSet## and assert when set failure.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18614 6f19259b-4bc3-4df7-8a09-765794883524
There is no real build failure, as AuthVariableLib always links to variable driver.
But for code integrity, we should add it.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18613 6f19259b-4bc3-4df7-8a09-765794883524
Clean up files in RngDxe/IA32 and RngDxe/X64 that are subsumed
by files in BaseRngLib.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Thomas Palmer <thomas.palmer@hpe.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Qin Long <qin.long@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18592 6f19259b-4bc3-4df7-8a09-765794883524
Use the new RngLib to provide the IA32/X64 random data for RngDxe.
Remove x86 specific functions from RdRand files.
Simplify RngDxe by using WriteUnaligned64 for all platforms.
Use GetRandomNumber128 in RngDxe to leverage 128 bit support provided
by some HW RNG devices.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Thomas Palmer <thomas.palmer@hpe.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Qin Long <qin.long@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18591 6f19259b-4bc3-4df7-8a09-765794883524
Some of the TPM/TPM2 DEBUG messages are at EFI_D_INFO level,
even though they are simply tracing functions that run on every boot even
if there is no TPM installed. Changed verbosity to EFI_D_VERBOSE.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Samer El-Haj-Mahmoud" <samer.el-haj-mahmoud@hpe.com>
Reviewed-by: "Jiewen Yao" <Jiewen.Yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18476 6f19259b-4bc3-4df7-8a09-765794883524
VerifyBuffer() in PKCS7 Verify Protocol should return EFI_UNSUPPORTED
when the embedded content is found in SignedData but InData is not NULL.
This patch is to comply with the spec definition.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qin Long <qin.long@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18311 6f19259b-4bc3-4df7-8a09-765794883524
PcdLib introduces generic API to get the size of VOID* PCD value.
Update Pei and Dxe RsaGuidedLib to use generic PCD API instead of GetEx API.
This change can remove PCD type limitation in these two libraries.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18277 6f19259b-4bc3-4df7-8a09-765794883524
PcdTcg2HashAlgorithmBitmap is declared in a section that allows it to be Fixed or PatchableAtBuild, but there is code that sets it.
This breaks the build on some platforms. Changed it to be PcdsDynamic and PcdsDynamicEx only.
We move PcdTpm2HashMask to Dynamic section too, because now Tcg2Pei will set this PCD according to TPM2 device capability.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Samer El-Haj-Mahmoud" <samer.el-haj-mahmoud@hp.com>
Reviewed-by: "Yao, Jiewen" <Jiewen.Yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18233 6f19259b-4bc3-4df7-8a09-765794883524
Follow UEFI specification to add context check and init in BaseCrypto2Hash(), so that other function can get proper status on hash operation.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <Jiewen.Yao@intel.com>
Reviewed-by: "Zhang, Chao B" <chao.b.zhang@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18227 6f19259b-4bc3-4df7-8a09-765794883524
Update SignatureSize to include SignatureOwner GUID. This behavior is defined by UEFI spec
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Qin Long <qin.long@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18226 6f19259b-4bc3-4df7-8a09-765794883524
TCG EFI Protocol Specification for TPM Family 2.0 Revision 1.0 Version 9 at http://www.trustedcomputinggroup.org/resources/tcg_efi_protocol_specification
TCG Physical Presence Interface Specification Version 1.30, Revision 00.52 at http://www.trustedcomputinggroup.org/resources/tcg_physical_presence_interface_specification
Add Tcg2XXX, similar file/directory as TrEEXXX. Old TrEE driver/library can be deprecated.
1) Add Tcg2Pei/Dxe/Smm driver to log event and provide services.
2) Add Dxe/Pei/SmmTcg2PhysicalPresenceLib to support TCG PP.
3) Update Tpm2 library to use TCG2 protocol instead of TrEE protocol.
Test Win8/Win10 with SecureBoot enabled, PCR7 shows bound.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <Jiewen.Yao@intel.com>
Reviewed-by: "Zhang, Chao B" <chao.b.zhang@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18219 6f19259b-4bc3-4df7-8a09-765794883524
Hao Wu
Yao, Jiewen
Chao Zhang
Samer El-Haj-Mahmoud
Michael Kinney
Star Zeng
Eric Dong
Liming Gao
Jordan Justen
Ard Biesheuvel
Cohen, Eugene
Thomas Palmer
Qiu Shumin
Qin Long
Samer El-Haj-Mahmoud