1. Reduce the debug message during boot.
2. Update SmmCore debug level of MemoryAttributesTable align to DxeCore.
Signed-off-by: Yang Gang <yanggang@byosoft.com.cn>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
EFI_PEI_LOAD_FILE_PPI is invoked by DxeIpl for loading DxeCore.
It's possible that the instance produced by PeiCore fails to load but
other instances of EFI_PEI_LOAD_FILE_PPI can load.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Acked-by: Hao A Wu <hao.a.wu@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Fix various typos throughout MdeModulePkg.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
The DXE Core sets up a protocol notify function in its entry point, for
instances of the Firmware Volume Block2 Protocol:
DxeMain() [DxeMain/DxeMain.c]
FwVolDriverInit() [FwVol/FwVol.c]
Assume that a 3rd party UEFI driver or application installs an FVB
instance, with crafted contents. The notification function runs:
NotifyFwVolBlock() [FwVol/FwVol.c]
installing an instance of the Firmware Volume 2 Protocol on the handle.
(Alternatively, assume that a 3rd party application calls
gDS->ProcessFirmwareVolume(), which may also produce a Firmware Volume 2
Protocol instance.)
The EFI_FIRMWARE_VOLUME2_PROTOCOL.ReadSection() member performs "a
depth-first, left-to-right search algorithm through all sections found in
the specified file" (quoting the PI spec), as follows:
FvReadFileSection() [FwVol/FwVolRead.c]
GetSection() [SectionExtraction/CoreSectionExtraction.c]
FindChildNode() [SectionExtraction/CoreSectionExtraction.c]
FindChildNode() // recursive call
FindChildNode() is called recursively for encapsulation sections.
Currently this recursion is not limited. Introduce a new PCD
(fixed-at-build, or patchable-in-module), and make FindChildNode() track
the section nesting depth against that PCD.
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1743
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201119105340.16225-3-lersek@redhat.com>
FindChildNode() has two callers: GetSection(), and FindChildNode() itself.
- At the GetSection() call site, a positive (i.e., nonzero)
SectionInstance is passed. This is because GetSection() takes a
zero-based (UINTN) SectionInstance, and then passes
Instance=(SectionInstance+1) to FindChildNode().
- For reaching the recursive FindChildNode() call site, a section type
mismatch, or a section instance mismatch, is necessary. This means,
respectively, that SectionInstance will either not have been decreased,
or not to zero anyway, at the recursive FindChildNode() call site.
Add two ASSERT()s to FindChildNode(), for expressing the (SectionSize>0)
invariant.
In turn, the invariant provides the explanation why, after the recursive
call, a zero SectionInstance implies success. Capture it in a comment.
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201119105340.16225-2-lersek@redhat.com>
CoreInitializeMemoryServices() logs "BaseAddress" and "Length" with
DEBUG() before DxeMain() calls ProcessLibraryConstructorList()
explicitly. (Library construction is not an automatic part of the DXE
Core entry point.)
So those DEBUG()s in CoreInitializeMemoryServices() are issued against
an un-constructed DebugLib, and also against a -- possibly underlying --
un-constructed SerialPortLib.
Some DebugLib instances can deal with this (see for example commit
91a5b13650, "OvmfPkg/PlatformDebugLibIoPort: fix port detection for
use in the DXE Core", 2018-08-06), while some others can't (see for
example the DebugLib instance
"MdePkg/Library/BaseDebugLibSerialPort/BaseDebugLibSerialPort.inf"
coupled with the SerialPortLib instance
"ArmVirtPkg/Library/FdtPL011SerialPortLib/FdtPL011SerialPortLib.inf").
Addressing this issue in a SerialPortLib instance that underlies
BaseDebugLibSerialPort seems wrong; either the DebugLib instance should
cope directly with being called un-constructed (see again commit
91a5b13650), or the DXE Core should log relevant information *at
least* after library instances have been constructed. This patch
implements the latter (only for the "BaseAddress" and "Length" values
calculated by CoreInitializeMemoryServices()).
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jeff Brasen <jbrasen@nvidia.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20201103161557.30621-1-lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
CoreInitializeMemoryServices was not checking for any existing memory
allocation created in the HOB producer phase. If there are memory
allocations outside of the region covered by the HOB List then Gcd could
select that region for memory which can result in the memory allocation
to not be handled and memory overwrites.
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3028
The FirmwareVolume2Protocol->GetNextFile() produced by DXE Core can be used
to search for a file based on the value of *FileType input. However, this
service will always return EFI_NOT_FOUND if the input FileType is set to
EFI_FV_FILETYPE_MM_STANDALONE or EFI_FV_FILETYPE_MM_CORE_STANDALONE, Which
means user can't use this service to search any standalone MM image in that
FV.
This patch update the FirmwareVolume2Protocol->GetNextFile() service to
support searching standalone MM module.
Signed-off-by: Siyuan Fu <siyuan.fu@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
OSs are now capable of treating SP and CRYPTO memory as true capabilities
and therefore these should be exposed. This requires usage of a separate
ACCESS_MASK to hide all page-access permission capabilities.
Change in masking and hiding of SP and CRYPTO was introduced in
3bd5c994c8
Signed-off-by: Malgorzata Kukiello <jacek.kukiello@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Oleksiy Yakovlev <oleksiyy@ami.com>
Cc: Ard Biesheuvel (ARM address) <ard.biesheuvel@arm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
GHCB pages must be mapped as shared pages, so modify the process of
creating identity mapped pagetable entries so that GHCB entries are
created without the encryption bit set. The GHCB range consists of
two pages per CPU, the first being the GHCB and the second being a
per-CPU variable page. Only the GHCB page is mapped as shared.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Acked-by: Hao A Wu <hao.a.wu@intel.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1614
When we allocate pool to save the rebased PEIMs, the address will change
randomly, therefore the hash will change and result PCR0 change as well.
To avoid this, we save the raw PEIMs and use it to calculate hash.
The MigratedFvInfo HOB will never produce when
PcdMigrateTemporaryRamFirmwareVolumes is FALSE, because the PCD control
the total feature.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Debkumar De <debkumar.de@intel.com>
Cc: Harry Han <harry.han@intel.com>
Cc: Catharine West <catharine.west@intel.com>
Signed-off-by: Guomin Jiang <guomin.jiang@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1614
Introduces new changes to PeiCore to move the contents of temporary
RAM visible to the PeiCore to permanent memory. This expands on
pre-existing shadowing support in the PeiCore to perform the following
additional actions:
1. Migrate pointers in PPIs installed in PeiCore to the permanent
memory copy of PeiCore.
2. Copy all installed firmware volumes to permanent memory.
3. Relocate and fix up the PEIMs within the firmware volumes.
4. Convert all PPIs into the migrated firmware volume to the corresponding
PPI address in the permanent memory location.
This applies to PPIs and PEI notifications.
5. Convert all status code callbacks in the migrated firmware volume to
the corresponding address in the permanent memory location.
6. Update the FV HOB to the corresponding firmware volume in permanent
memory.
7. Use PcdMigrateTemporaryRamFirmwareVolumes to control if enable the
feature or not. when disable the PCD, the EvacuateTempRam() will
never be called.
The function control flow as below:
PeiCore()
DumpPpiList()
EvacuateTempRam()
ConvertPeiCorePpiPointers()
ConvertPpiPointersFv()
MigratePeimsInFv()
MigratePeim()
PeiGetPe32Data()
LoadAndRelocatePeCoffImageInPlace()
MigrateSecModulesInFv()
ConvertPpiPointersFv()
ConvertStatusCodeCallbacks()
ConvertFvHob()
RemoveFvHobsInTemporaryMemory()
DumpPpiList()
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Debkumar De <debkumar.de@intel.com>
Cc: Harry Han <harry.han@intel.com>
Cc: Catharine West <catharine.west@intel.com>
Signed-off-by: Michael Kubacki <michael.a.kubacki@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
The MM communicate 2 protocol was introduced to factor out the mismatch
between traditional MM, which requires the physical address of the MM
buffer to be passed, and standalone MM, which copies the MM communicate
buffer data into a separate buffer, requiring the virtual address. For
this reason, MM communicate 2 carries both addresses, allowing the
implementation to decide which address it needs.
This hides this implementation detail from the callers of the protocol,
which simply passes both addresses without having to reason about what the
implementation of the protocol actually needs.
Note that the old version of the protocol is retained, in order to support
existing implementations that don't require this flexibility.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The memory attributes table handling code shared some parts of the
properties table handling code when it was introduced. The latter has
been dropped, and so we can merge the remaining pieces into the former.
Link: https://bugzilla.tianocore.org/show_bug.cgi?id=2633
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Bret Barkelew <bret.barkelew@microsoft.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
This is the minimal change required to stop exposing the EFI properties
table, which is deprecated. Given how the implementation is entangled
with the code that exposes the related memory attributes table, most of
the code is retained, and further cleanups are relegated to subsequent
patches.
Link: https://bugzilla.tianocore.org/show_bug.cgi?id=2633
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
In the CoreStartImage() function [MdeModulePkg/Core/Dxe/Image/Image.c], if
the image entry point returns a failure code, then the DXE Core logs a
helpful DEBUG_ERROR message, with the following format string:
"Error: Image at %11p start failed: %r\n"
Do similarly in the SMM Core (update the message slightly).
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Ray Ni <ray.ni@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1512
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200226221156.29589-2-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
EDK2's implementation of the LoadImage() boot service permits non-native
binaries to be loaded (i.e., X64 images on IA32 firmware), but any
attempts to start such an image using StartImage() will return
EFI_UNSUPPORTED.
The integration of the PE/COFF emulator protocol into the DXE core
deviates slightly from this paradigm, given that its IsImageSupported
hook as well as its RegisterImage hook are invoked from LoadImage,
and by the time StartImage is called, no opportunity is given to the
provider of the PE/COFF emulator protocol to prevent an image from
being started if it only supports loading it.
To address this disparity, let's move the invocation of RegisterImage()
to the implementation of the StartImage() boot service, allowing the
emulator to permit LoadImage() but reject StartImage() on images that
turn out not to meet the requirements of the emulator as it is being
started.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2564
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1869
The UEFI spec requires that if any error occurs in
UninstallMultipleProtocolInterfaces(), EFI_INVALID_PARAMETER is returned
and not the return code of UninstallProtocolInterface().
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Fix various typos in comments and documentation.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Signed-off-by: Antoine Coeur <coeur@gmx.fr>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200207010831.9046-18-philmd@redhat.com>
Fix various typos in comments and documentation.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Signed-off-by: Antoine Coeur <coeur@gmx.fr>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200207010831.9046-17-philmd@redhat.com>
This patch clarifies wording in several PeiCore comments to improve
reading comprehension.
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Signed-off-by: Michael Kubacki <michael.a.kubacki@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
To solve access issue reported by BZ1885, page 0 will be allocated to
avoid misuses if NULL pointer detection is enabled. It should be better
to be freed after EndOfDxe if BIT7 of PcdNullPointerDetectionPropertyMask
is set, because NULL pointer detection is no longer available after
EndOfDxe and there will be no access conflict.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1885
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
When a boot loader examines the memory map, it can see that location 0
is available memory. If it chooses to use that memory, and
PcdNullPointerDetectionPropertyMask is enabled, use of memory in page 0
will cause an exception. This does occur when running the memtest86
program.
Leaving page 0 available is for legacy support purpose. Since we have
deprecated the support of legacy, the solution is just reserving it so
that it cannot be allocated for other uses.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1885
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
MapMemory is not initialized by FindGuardedMemoryMap
or CoreInternalAllocatePages which calls MapMemory.
So we give a 0 to it.
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
An extra 's' slipped into the FvIsBeingProcessed function
name. Drop it to fix the typo.
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
An extra 's' slipped into the FvIsBeingProcessed function
name. Drop it to fix the typo.
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
The SmiHandlerRegister() function explicitly casts "SmiHandler" (of type
(SMI_HANDLER*)) to EFI_HANDLE, when outputting "DispatchHandle".
Apply the same cast in the counterpart function SmiHandlerUnRegister(),
which compares multiple "SmiHandler"s against the input "DispatchHandle".
This is a semantic cleanup; there is no functional change.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Clean up two issues around FindFileEx():
- The "AprioriFile" parameter's type differs between the function
declaration and the function definition. The correct type is
(EFI_PEI_FILE_HANDLE*).
- "FfsFileHeader" has type (EFI_FFS_FILE_HEADER*); for clarity, we should
cast it explicitly to EFI_PEI_FILE_HANDLE when assigning it to
(*AprioriFile).
This is a semantic cleanup, there is no functional change.
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
The PI spec (v1.7) correctly specifies "EFI_RUNTIME_EVENT_ENTRY.Event" in
natural language, but the field type in the structure definition itself is
wrong -- it should be EFI_EVENT, not (EFI_EVENT*).
This spec bug is likely unfixable for compatibility reasons, and so edk2
works it around already. We should clearly document the workaround.
Functionally, this patch is a no-op.
(I've also requested a non-normative (informative) clarification for the
PI spec: <https://mantis.uefi.org/mantis/view.php?id=2017>.)
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
The Fpdt driver (FirmwarePerformanceDxe) saves a memory address across
reboots, and then does an AllocatePage for that memory address.
If, on this boot, that memory comes from a Runtime memory bucket,
the MAT table is not updated. This causes Windows to boot into Recovery.
This patch blocks the memory manager from changing the page
from a special bucket to a different memory type. Once the buckets are
allocated, we freeze the memory ranges for the OS, and fragmenting
the special buckets will cause errors resuming from hibernate (S4).
The references to S4 here are the use case that fails. This
failure is root caused to an inconsistent behavior of the
core memory services themselves when type AllocateAddress is used.
The main issue is apparently with the UEFI memory map -- the UEFI memory
map reflects the pre-allocated bins, but the actual allocations at fixed
addresses may go out of sync with that. Everything else, such as:
- EFI_MEMORY_ATTRIBUTES_TABLE (page protections) being out of sync,
- S4 failing
are just symptoms / consequences.
This patch is cherry pick from Project Mu:
a9be767d9b
With the minor change,
1. Update commit message format to keep the message in 80 characters one line.
2. Remove // MU_CHANGE comments in source code.
3. Update comments style to follow edk2 style.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Liming Gao <liming.gao@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Acked-by: Hao A Wu <hao.a.wu@intel.com>
Initialize PageMapLevel5Entry at the beginning of the function.
This commit will fix a GCC 4.8.5 build failure introduced by commit
b3527dedc3.
OvmfPkg build failure wtih gcc 4.8.5 still exists at latest edk2 version.
The commit 46f8a68916 seems not to fix
the build failure completely.
Cc: Dandan Bi <dandan.bi@intel.com>
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
This commit will fix a GCC 4.8.5 build failure introduced by commit
b3527dedc3.
PageMapLevel5Entry may be uninitialized in original code, which means
uninitialized pointer will be modified at some circumstance.
So relocate the operation of PageMapLevel5Entry++ in order to make sure
the pointer could be modified only when it is initialized.
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2008
DxeIpl is responsible to create page table for DXE phase running
either in long mode or in 32bit mode with certain protection
mechanism enabled (refer to ToBuildPageTable()).
The patch updates DxeIpl to create 5-level page table for DXE phase
running in long mode when PcdUse5LevelPageTable is TRUE and CPU
supports 5-level page table.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Signed-off-by: Eric Dong <eric.dong@intel.com>
RecoveryLib.h and PeiRecoveryLibNull have been deprecated from 2009,
so remove them.
https://bugzilla.tianocore.org/show_bug.cgi?id=1299
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
S3Lib.h and PeiS3LibNull have been deprecated since 2009, so remove them.
https://bugzilla.tianocore.org/show_bug.cgi?id=1299
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1948
Update the data structure signatures in the PiSmmCore
to be unique. Some of the signatures are the same as those
used by the DxeCore. For example, the memory pool head and
tail structures use the same signature in the PiSmmCore
and DxeCore. This means the use of the wrong FreePool API
will not be noticed at the time FreePool is called and a
failure can occur much later. By making the signatures
unique, misuse of an API is caught at that time the API is
called.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF: https://github.com/tianocore/tianocore.github.io/wiki/
UEFI-Capsule-on-Disk-Introducation
If Capsule On Disk mode, call Capsule On Disk Load PPI to load
capsules. When it fails, still goes to Firmware Update boot path.
BDS will clear corresponding indicator and reboot later on.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Chao B Zhang <chao.b.zhang@intel.com>
Signed-off-by: Wei6 Xu <wei6.xu@intel.com>
Reviewed-by: Chao B Zhang <chao.b.zhang@intel.com>
Acked-by: Hao A Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1901
The original logic is ASSERT if fail to create HOB. But
that doesn't make sense for release version. So it is required
to set the Buffer to null to indicate the failure.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Michael Turner <Michael.Turner@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Acked-by: Hao A Wu <hao.a.wu@intel.com>
https://github.com/tianocore/tianocore.github.io/wiki/UEFI-Capsule-
on-Disk-Introducation
If Capsule On Disk mode, call Capsule On Disk Load PPI to load
capsules. When it fails, still goes to Firmware Update boot path.
BDS will clear corresponding indicator and reboot later on.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Chao B Zhang <chao.b.zhang@intel.com>
Signed-off-by: Wei6 Xu <wei6.xu@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Chao B Zhang <chao.b.zhang@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1464
Currently Framework compatibility is not needed and
PcdFrameworkCompatibilitySupport will be removed from edk2.
So remove the usage of this PCD firstly.
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1460
Refer to Uefi spec 2.8, the ResetData is valid while ResetStatus
is EFI_SUCCESS regardless of the ResetType is EfiResetPlatformSpecific
or not.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Michael Turner <Michael.Turner@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
After commit 57df17fe26, some static check reports suspicious NULL pointer
deference at line:
Entry->MachineType = Entry->Emulator->MachineType;
^^^^^^^^^^^^^^^
within function PeCoffEmuProtocolNotify().
However, 'Entry->Emulator' is guaranteed to have a non-NULL value when
previous call to the CoreHandleProtocol() returns EFI_SUCCESS.
This commit will re-write the return status check for CoreHandleProtocol()
to add explicit NULL pointer check for protocol instance pointer.
Cc: Jian J Wang <jian.j.wang@intel.com>
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Now that the EBC machine type is no longer classified as a
natively supported machine type on the architectures that can
support it via the EBC interpreter, the EBC specific handling
in DXE core is no longer used and can be removed.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
When encountering PE/COFF images that cannot be supported natively,
attempt to locate an instance of the PE/COFF image emulator protocol,
and if it supports the image, proceed with loading it and register it
with the emulator.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Yang Gang
Ray Ni
Rebecca Cran
Vitaly Cheptsov
Laszlo Ersek
Jeff Brasen
Siyuan Fu
Malgorzata Kukiello
Michael D Kinney
Tom Lendacky
Guomin Jiang
Michael Kubacki
Oleksiy Yakovlev
Ard Biesheuvel
Abner Chang
Ard Biesheuvel
Heinrich Schuchardt
Antoine Coeur
Jian J Wang
Shenglei Zhang
Philippe Mathieu-Daude
Mike Turner
Wei6 Xu
Bret Barkelew
Zhang, Chao B
Dandan Bi
Zhichao Gao
Hao Wu