Accept the VT220 escape code [3~ as backspace for TtyTerm terminals. This is
sent by many Linux terminals by default. Also accept VT220 function keys
F1-F12, and VT100 F1-F4 keys as these are commonly sent by Linux terminals.
The VT220 escape codes are longer, and variable length so a new state is added
to the state machine along with a variable to construct the multibyte escape
sequence.
There are currently no ambiguous escape sequence prefixes accepted, so the TTY
terminal accepts escape sequences for a variety of terminals. The goal is to
'just work' with as many terminals as possible, rather than properly emulating
any specific terminal. Backspace, Del, and F10 have been tested on xterm,
rxvt, tmux, and screen.
Note: The existing vt100 function key handling does not match the vt100
documentation that I found, so I added the TTY terminal handling
of VT100 F1-F4 (really PF1-PF4 on vt100) separately. The vt100
has no F5-F10 keys, so I don't know what the current vt100 code
is based on.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Roy Franz <roy.franz@linaro.org>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17897 6f19259b-4bc3-4df7-8a09-765794883524
Treat ASCII 0x7F as backspace, rather than delete, for TTY terminals. This
better matches the default Linux terminal settings that are used when connecting
to a simulated platform using xterm or a similar terminal program.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Roy Franz <roy.franz@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17896 6f19259b-4bc3-4df7-8a09-765794883524
This patch a adds new terminal type, TtyTerm, to TerminalDxe. This terminal
type provides a place to add support for various *nix terminals that don't
behave like standard VT terminals. The goal is to 'just work' with as many
terminals as possible, rather than properly emulating any one specific
terminal.
Signed-off-by: Roy Franz <roy.franz@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17895 6f19259b-4bc3-4df7-8a09-765794883524
UEFI spec has clear description below:
Configuration Table Groups
The GUID for a configuration table also defines a corresponding event group GUID with the same value.
If the data represented by a configuration table is changed,
InstallConfigurationTable() should be called.
When InstallConfigurationTable() is called, the corresponding event is signaled.
When this event is signaled,
any components that cache information from the configuration table can optionally update their cached state.
For example, EFI_ACPI_TABLE_GUID defines a configuration table for ACPI data.
When ACPI data is changed, InstallConfigurationTable() is called.
During the execution of InstallConfigurationTable(),
a corresponding event group with EFI_ACPI_TABLE_GUID is signaled,
allowing an application to invalidate any cached ACPI data.
But current implementation only InstallConfigurationTable() at first time ACPI data change.
if (((Version & EFI_ACPI_TABLE_VERSION_1_0B) != 0) &&
!AcpiTableInstance->TablesInstalled1) {
Status = gBS->InstallConfigurationTable (&gEfiAcpi10TableGuid, AcpiTableInstance->Rsdp1);
if (EFI_ERROR (Status)) {
return EFI_ABORTED;
}
AcpiTableInstance->TablesInstalled1 = TRUE;
}
if (((Version & ACPI_TABLE_VERSION_GTE_2_0) != 0) &&
!AcpiTableInstance->TablesInstalled3) {
Status = gBS->InstallConfigurationTable (&gEfiAcpiTableGuid, AcpiTableInstance->Rsdp3);
if (EFI_ERROR (Status)) {
return EFI_ABORTED;
}
AcpiTableInstance->TablesInstalled3= TRUE;
}
The AcpiTableInstance->TablesInstalled1 and AcpiTableInstance->TablesInstalled3 conditional judgment need to be removed.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17885 6f19259b-4bc3-4df7-8a09-765794883524
The call in ProbeMediaStatus() to the ReadDisk() function of the
EFI_DISK_IO_PROTOCOL interface implemented in DiskIoDxe/DiskIo.c
crashed in DiskIo2ReadWriteDisk() because of the NULL value of
the destination buffer pointer.
Pass the address of a buffer in the stack instead of a NULL
pointer.
In addition to avoiding the crash, that way, the media probe does not
depend anymore on the way the EFI_DISK_IO_PROTOCOL implementation deals
with a NULL value of the destination buffer pointer as the UEFI
specification does not specify the expected behaviour.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <Ronald.Cron@arm.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17859 6f19259b-4bc3-4df7-8a09-765794883524
and also add new UI configuration support in Ip4Dxe driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: jiaxinwu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17853 6f19259b-4bc3-4df7-8a09-765794883524
MdeModulePkg has defined gZeroGuid in 'Guid/ZeroGuid.h', therefore, the
mZeroGuid defined in Universal/Variable/RuntimeDxe is redundant.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17840 6f19259b-4bc3-4df7-8a09-765794883524
MdeModulePkg has defined gZeroGuid in 'Guid/ZeroGuid.h', therefore, the
gZeroGuid defined in SetupBrowserDxe is redundant.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17839 6f19259b-4bc3-4df7-8a09-765794883524
1. When Property->Attributes == 0, don't check input Attributes.
2. Enhance comments to be indent aligned and debug message
to be aligned with other messages.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17794 6f19259b-4bc3-4df7-8a09-765794883524
What to do:
1. Merge from Auth Variable driver in SecurityPkg to Variable drive in
MdeModulePkg. Then the merged Variable driver in MdeModulePkg will
link to AuthVariableLib and TpmMeasurementLib.
AuthVariableLibNull and TpmMeasurementLibNull in MdeModulePkg
could be used for non auth variable support.
AuthVariableLib and DxeTpmMeasurementLib in SecurityPkg
may be used for auth variable support.
Why to do:
1. Remove code duplication and reduce maintenance effort.
After auth variable service separated from Auth Variable driver in SecurityPkg
to AuthVariableLib. The remaining code logic of Auth Variable driver in SecurityPkg
will be almost same with Variable driver in MdeModulePkg. Now it is to
merge them.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17765 6f19259b-4bc3-4df7-8a09-765794883524
What to do:
1. Add AuthVariableLib LibraryClass definitions.
2. Implement a NULL AuthVariableLib library instance.
3. Add VARIABLE_ENTRY_PROPERTY definition to VarCheck.h.
4. Add VARIABLE_ENTRY_CONSISTENCY and variable attribute
combinations definitions to VariableFormat.h.
Why to do:
1. Share code.
1.1. Separate auth variable service from Auth Variable driver in
SecurityPkg to AuthVariableLib. Then the AuthVariableLib could benefit
and be used by different implementation of Auth Variable drivers.
1.2 The VARIABLE_ENTRY_PROPERTY definition to VarCheck.h,
VARIABLE_ENTRY_CONSISTENCY and variable attribute
combinations definitions to VariableFormat.h will be shared
by merged Variable driver and AuthVariableLib.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17757 6f19259b-4bc3-4df7-8a09-765794883524
What to do:
1. Merge from VariablePei in SecurityPkg to VariablePei in MdeModulePkg.
Why to do:
1. Remove code duplication and reduce maintenance effort.
The code logic of VariablePei in SecurityPkg is same with VariablePei
in MdeModulePkg.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17756 6f19259b-4bc3-4df7-8a09-765794883524
in function scope that are assigned but never used afterwards.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17664 6f19259b-4bc3-4df7-8a09-765794883524
System hangs when RTC time rollover 1999 to 2000
Error processing of GetTime function:
If get time fail,the date/time will display ??,
and update help info to let user know get time fail.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17651 6f19259b-4bc3-4df7-8a09-765794883524
VariableLock in VariableSmmRuntimeDxe.c is installed in EntryPoint now.
It works based on SMM variable handler by SMM communication with
payload buffer. But the payload buffer and SMM variable handler will
be not ready in EntryPoint before SmmVariableReady() call back.
VarCheck in VariableSmmRuntimeDxe.c has the same issue,
so move VarCheck install into SmmVariableReady() also.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17626 6f19259b-4bc3-4df7-8a09-765794883524
Display engine base on class opcode to detect whether in
front page.Now remove class/subclass and use FormsetGuid
or ClassGuid to judge whether in front page
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17590 6f19259b-4bc3-4df7-8a09-765794883524
ARM toolchain raises the error: "statement is unreachable"
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <Olivier.Martin@arm.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17529 6f19259b-4bc3-4df7-8a09-765794883524
fix bellow bug:
change checkbox from FALSE to TRUE.EFI_BROWSER_ACTION_CHANGED called
but when checkbox change back to FALSE,don't call EFI_BROWSER_ACTION_CHANGED
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17512 6f19259b-4bc3-4df7-8a09-765794883524
class/subclass is the obseleted key word in VFR file. It is designed in framework HII.
After convert to UEFI HII, it is not used any longer. Now remove them from VFR
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17493 6f19259b-4bc3-4df7-8a09-765794883524