Added entries for UEFI Config Tables not present in current
Dmem output.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Sam Kaynor <Sam.Kaynor@arm.com>
Reviewed-by: Sunny Wang <sunny.wang@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Samer El-Haj-Mahmoud <Samer.El-Haj-Mahmoud@arm.com>
The COMP shell command compares two files byte for byte. In order to
retrieve the bytes to compare, it currently invokes
gEfiShellProtocol->ReadFile() on both files, using a single-byte buffer
every time. This is very inefficient; the underlying
EFI_FILE_PROTOCOL.Read() function may be costly.
Read both file operands in chunks of "PcdShellFileOperationSize" bytes.
Draw bytes for comparison from the internal read-ahead buffers.
Some ad-hoc measurements on my laptop, using OVMF, and the 4KB default of
"PcdShellFileOperationSize":
- When comparing two identical 1MB files that are served by EnhancedFatDxe
on top of VirtioScsiDxe, this patch brings no noticeable improvement;
the comparison completes in <1s both before and after.
- When comparing two identical 1MB files served by VirtioFsDxe, the
comparison time improves from 2 minutes 25 seconds to <1s.
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3123
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Message-Id: <20210113085453.10168-2-lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
With Itanium architecture unsupported, gEfiSalSystemTableGuid
and gEfiMpsTableGuid will be no longer used.
https://bugzilla.tianocore.org/show_bug.cgi?id=1560
v2:Withdraw the removal of #include <Guid/Mps.h> and
gEfiMpsTableGuid.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The PCDs below are unused, so they have been removed from inf.
gEfiShellPkgTokenSpaceGuid.PcdShellFileOperationSize
gEfiMdePkgTokenSpaceGuid.PcdMaximumUnicodeStringLength
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
1. Do not use tab characters
2. No trailing white space in one line
3. All files must end with CRLF
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
The UEFI Shell specification classifies shell commands into various shell
levels / profiles.
Currently the DumpHex() internal function is only used by commands that
belong to the Debug1 profile exclusively (i.e., they are not required to
be present in other than Debug1 profiles):
- SMBIOSVIEW
- PCI
- DMPSTORE
- DMEM
- DBLK
In the next patch, we'd like to call DumpHex() from BCFG as well. However,
BCFG is not only required to be present in the Debug1 profile; the
Install1 profile contains BCFG as well. For this reason, move DumpHex()
from UefiShellDebug1CommandsLib to the more generic UefiShellCommandLib,
which "Provides interface to shell internal functions for shell commands".
The matching header file is "ShellPkg/Include/Library/ShellCommandLib.h".
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ryan Harkin <ryan.harkin@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19717 6f19259b-4bc3-4df7-8a09-765794883524
In multiple root bridge platforms, different root bridges may
share the same segment but occupy different range of buses,
or may occupy different segments.
The fix is to find the correct root bridge IO instance by
comparing not only the segment but also the bus ranges.
It tries to access the MMIO and IO in the following order:
PciRootBridgeIo, CpuIo and direct IO.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19181 6f19259b-4bc3-4df7-8a09-765794883524
Some of the libraries under ShellPkg/Library/ are only intended to be
loaded into the Shell by means of a NULL LibraryClass resolution, and
serve no other purpose. Since the Shell itself is a UEFI_APPLICATION, it
makes sense to set the module type of those libraries to UEFI_APPLICATION
as well.
This allows us to use different compiler flags for the Shell application
itself but also for the majority of its constituent parts that are built
separately via these libraries.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18310 6f19259b-4bc3-4df7-8a09-765794883524
smbiosview can dump 64-bit entry point and table
as long as SMBIOS 3.0 table exists in system configuration table.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Elvin Li <elvin.li@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17060 6f19259b-4bc3-4df7-8a09-765794883524
Sam Kaynor
Laszlo Ersek
Shenglei Zhang
Michael D Kinney
Liming Gao
Ruiyu Ni
Ard Biesheuvel
Elvin Li
Qiu Shumin
Jaben Carsey
lzeng14
lgao4
jcarsey
ydong10
hhtian