V4 changes:
1. Serial console log for different threads when program register table.
2. Check the AcpiCpuData before use it to avoid potential ASSERT.
V3 changes:
1. Use global variable instead of internal function to return string for register type
and dependence type.
2. Add comments for some complicated logic.
V1 changes:
Because this driver needs to set MSRs saved in normal boot phase, sync
semaphore logic from RegisterCpuFeaturesLib code which used for normal boot phase.
Detail see below change for RegisterCpuFeaturesLib:
UefiCpuPkg/RegisterCpuFeaturesLib: Add logic to support semaphore type.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
V4 changes include:
1. Serial debug message for different threads when program the register table.
V3 changes include:
1. Use global variable instead of internal function to return string for register type
and dependence type.
2. Add comments for some complicated logic.
V2 changes include:
1. Add more description for the code part which need easy to understand.
2. Refine some code base on feedback for V1 changes.
V1 changes include:
In a system which has multiple cores, current set register value task costs huge times.
After investigation, current set MSR task costs most of the times. Current logic uses
SpinLock to let set MSR task as an single thread task for all cores. Because MSR has
scope attribute which may cause GP fault if multiple APs set MSR at the same time,
current logic use an easiest solution (use SpinLock) to avoid this issue, but it will
cost huge times.
In order to fix this performance issue, new solution will set MSRs base on their scope
attribute. After this, the SpinLock will not needed. Without SpinLock, new issue raised
which is caused by MSR dependence. For example, MSR A depends on MSR B which means MSR A
must been set after MSR B has been set. Also MSR B is package scope level and MSR A is
thread scope level. If system has multiple threads, Thread 1 needs to set the thread level
MSRs and thread 2 needs to set thread and package level MSRs. Set MSRs task for thread 1
and thread 2 like below:
Thread 1 Thread 2
MSR B N Y
MSR A Y Y
If driver don't control execute MSR order, for thread 1, it will execute MSR A first, but
at this time, MSR B not been executed yet by thread 2. system may trig exception at this
time.
In order to fix the above issue, driver introduces semaphore logic to control the MSR
execute sequence. For the above case, a semaphore will be add between MSR A and B for
all threads. Semaphore has scope info for it. The possible scope value is core or package.
For each thread, when it meets a semaphore during it set registers, it will 1) release
semaphore (+1) for each threads in this core or package(based on the scope info for this
semaphore) 2) acquire semaphore (-1) for all the threads in this core or package(based
on the scope info for this semaphore). With these two steps, driver can control MSR
sequence. Sample code logic like below:
//
// First increase semaphore count by 1 for processors in this package.
//
for (ProcessorIndex = 0; ProcessorIndex < PackageThreadsCount ; ProcessorIndex ++) {
LibReleaseSemaphore ((UINT32 *) &SemaphorePtr[PackageOffset + ProcessorIndex]);
}
//
// Second, check whether the count has reach the check number.
//
for (ProcessorIndex = 0; ProcessorIndex < ValidApCount; ProcessorIndex ++) {
LibWaitForSemaphore (&SemaphorePtr[ApOffset]);
}
Platform Requirement:
1. This change requires register MSR setting base on MSR scope info. If still register MSR
for all threads, exception may raised.
Known limitation:
1. Current CpuFeatures driver supports DXE instance and PEI instance. But semaphore logic
requires Aps execute in async mode which is not supported by PEI driver. So CpuFeature
PEI instance not works after this change. We plan to support async mode for PEI in phase
2 for this task.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
v3 changes:
1. Move CPU_FEATURE_DEPENDENCE_TYPE definition here from RegisterCpuFeaturesLib.h file.
2. Add Invalid type for REGISTER_TYPE which will be used in code.
v2 changes:
1. Add more description about why we do this change.
2. Change structure field type from pointer to EFI_PHYSICAL_ADDRESS because it will
be share between PEI and DXE.
v1 Changes:
In order to support semaphore related logic, add new definition for it.
In a system which has multiple cores, current set register value task costs huge times.
After investigation, current set MSR task costs most of the times. Current logic uses
SpinLock to let set MSR task as an single thread task for all cores. Because MSR has
scope attribute which may cause GP fault if multiple APs set MSR at the same time,
current logic use an easiest solution (use SpinLock) to avoid this issue, but it will
cost huge times.
In order to fix this performance issue, new solution will set MSRs base on their scope
attribute. After this, the SpinLock will not needed. Without SpinLock, new issue raised
which is caused by MSR dependence. For example, MSR A depends on MSR B which means MSR A
must been set after MSR B has been set. Also MSR B is package scope level and MSR A is
thread scope level. If system has multiple threads, Thread 1 needs to set the thread level
MSRs and thread 2 needs to set thread and package level MSRs. Set MSRs task for thread 1
and thread 2 like below:
Thread 1 Thread 2
MSR B N Y
MSR A Y Y
If driver don't control execute MSR order, for thread 1, it will execute MSR A first, but
at this time, MSR B not been executed yet by thread 2. system may trig exception at this
time.
In order to fix the above issue, driver introduces semaphore logic to control the MSR
execute sequence. For the above case, a semaphore will be add between MSR A and B for
all threads. Semaphore has scope info for it. The possible scope value is core or package.
For each thread, when it meets a semaphore during it set registers, it will 1) release
semaphore (+1) for each threads in this core or package(based on the scope info for this
semaphore) 2) acquire semaphore (-1) for all the threads in this core or package(based
on the scope info for this semaphore). With these two steps, driver can control MSR
sequence. Sample code logic like below:
//
// First increase semaphore count by 1 for processors in this package.
//
for (ProcessorIndex = 0; ProcessorIndex < PackageThreadsCount ; ProcessorIndex ++) {
LibReleaseSemaphore ((UINT32 *) &SemaphorePtr[PackageOffset + ProcessorIndex]);
}
//
// Second, check whether the count has reach the check number.
//
for (ProcessorIndex = 0; ProcessorIndex < ValidApCount; ProcessorIndex ++) {
LibWaitForSemaphore (&SemaphorePtr[ApOffset]);
}
Platform Requirement:
1. This change requires register MSR setting base on MSR scope info. If still register MSR
for all threads, exception may raised.
Known limitation:
1. Current CpuFeatures driver supports DXE instance and PEI instance. But semaphore logic
requires Aps execute in async mode which is not supported by PEI driver. So CpuFeature
PEI instance not works after this change. We plan to support async mode for PEI in phase
2 for this task.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1251
*v2: Correct the type of parameters in Ikev2ParseProposalData(), and refined
the corresponding description.
IpSecDxe failed to create the Child SA during parsing SA Payload, the issue
was caused by the below commit:
SHA-1: 1e0db7b119
* MdeModulePkg/NetworkPkg: Checking for NULL pointer before use.
In above commit, it changed the value of IsMatch in Ikev2ChildSaParseSaPayload()
to FALSE. That's correct but it exposed the potential bug in to match the correct
proposal Data, which will cause the issue happen.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
The case is:
in the DSC file:
SKUID_IDENTIFIER = ALL
[SkuIds]
0|DEFAULT
1|A
[PcdsFixedAtBuild.common.A]
TokenSpaceGuid.Test401|{0x0F, 0x12}
TokenSpaceGuid.Test401.TEST401INT8ARRAY[0]|'B'
in the build report, Data = OverrideValues[Keys[0]], but the Keys[0]
is the keyword "DEFAULT", and in this case the "DEFAULT" SKU doesn't
save any value, then it cause the Data is empty, in the next code
when we use the code it cause crash.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The case is use Dynamic structure Pcd in the FDF file.
Current code already save the Guid, Name and Filed info for those Pcd,
but it directly use the dict key as [Name, Guid] and cause this crash
issue.
Fixes: https://bugzilla.tianocore.org/show_bug.cgi?id=1264
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
the bug is PcdValueFromComm is not set, but the Pcd have been override
by the command line option.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1266af5e952159 abstracted generic functions
from different modules (IntelVTdDxe, S3SaveStateDxe, PcRtc,
DpDynamicCommand and PiSmmCpuDxeSmm). Some of them (IntelVTdDxe and
PcRtc) checked Table against NULL before accessing Table->Signature,
some (S3SaveStateDxe, DpDynamicCommand and PiSmmCpuDxeSmm did not.
The ScanTableInSDT() in Acpi.c of UefiLib was mainly from
S3SaveStateDxe, so it does not check Table against NULL before
accessing Table->Signature.
This patch updates ScanTableInSDT() to check Table against NULL first
before accessing Table->Signature.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1241
Add support for both API (original mode) and DISPATCH mode:
1. Add FspMode field from reserved byte of Global
Data Structure to tell which mode is selected by boot
loader. If boot loader invoking FSP-M API this field
will remain as default 0 (API mode), otherwise platform
FSP should set this field to 1 (Dispatch mode) when
initializing Global Data Structure.
2. gFspInApiModePpiGuid will be instaled when FSP running in API
mode and modules only for API mode should have this in depex.
3. If it is DISPATCH mode, FSP will return to PEI dispatcher,
not directly return to boot loader.
4. DISPATCH mode supports DXE NotifyPhase drivers so FSP
will not wait for PEI NotifyPhase callbacks, instead it
will install gFspReadyForNotifyPhasePpiGuid PPI for
platform to complete late initialization before transferring
to DXE.
Test: Verified FSP API and DISPATCH modes on 2 internal
platforms and both boot successfully.
Cc: Jiewen Yao <Jiewen.yao@intel.com>
Cc: Desimone Nathaniel L <nathaniel.l.desimone@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
This change is to pass static analysis.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1237
Sometimes the memory will be contaminated by random data left in last
boot (warm reset). The code should not assume the allocated memory is
always filled with zero. This patch add code to clear data structure
used for stack switch to prevent such problem from happening.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
In the expression for unicode string and general string compare, it
should check whether it startswith "L'" or 'L"', but not "L".
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
the case is:
in the DSC:
[PcdsFixedAtBuild.common]
TokenSpaceGuid.TestFixedPcd|0xFFEAA000
[PcdsDynamicExDefault.common.DEFAULT]
!if TokenSpaceGuid.PcdFlag == TRUE
TokenSpaceGuid.PcdTest|TokenSpaceGuid.TestFixedPcd
!endif
Then build with --pcd TokenSpaceGuid.PcdFlag=TRUE, it report failure,
but if we build without this --pcd option, it could build success.
we found when the --pcd is enabled, the fixedatbuild pcds are not be
collected into expression to calculate.
Fixes: https://bugzilla.tianocore.org/show_bug.cgi?id=1256
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1249
We found potential dead codes within File.c during the code coverage test.
After manual review, we think the below ones are positive reports:
A. For function GetAllocationDescriptor():
Due to the all the calling places for this function, the input parameter
'RecordingFlags' can only with value 'LongAdsSequence' or
'ShortAdsSequence'. Moreover, this is also mentioned in the function
description comments for GetAllocationDescriptor().
So the below code will never be reached:
return EFI_DEVICE_ERROR;
This commit will add "ASSERT (FALSE);" before the above line to indicate
this and thus matching the function description comments.
B. For function GetAllocationDescriptorLsn():
Due to the all the calling places for this function, the input parameter
'RecordingFlags' can only with value 'LongAdsSequence' or
'ShortAdsSequence'. Moreover, this is also mentioned in the function
description comments for GetAllocationDescriptorLsn().
So the below code will never be reached:
return EFI_UNSUPPORTED;
This commit will add "ASSERT (FALSE);" before the above line to indicate
this and thus matching the function description comments.
Cc: Paulo Alcantara <palcantara@suse.de>
Cc: Paulo Alcantara <paulo@paulo.ac>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1249
We found potential dead codes within File.c during the code coverage test.
After manual review, we think the below ones are positive reports:
A. In function UdfRead():
else if (IS_FID_DELETED_FILE (Parent->FileIdentifierDesc)) {
Status = EFI_DEVICE_ERROR;
}
A File Identifier Descriptor will be get from the UDF media only by
function ReadDirectoryEntry(). And within this function, all the File
Identifier Descriptor with 'DELETED_FILE' characteristics will be skipped
and will not be returned. Hence, the above codes in function UdfRead()
will never be hit.
This commit will add "ASSERT (FALSE);" before the above line to indicate
this.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Paulo Alcantara <palcantara@suse.de>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1248
Within function UdfOpen():
This commit will use debug messages instead of using ASSERT when an error
occurs after calling GetFileSize().
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Paulo Alcantara <palcantara@suse.de>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1248
This commit will refine the ASSERTs in function GetLongAdLsn() and
GetAllocationDescriptorLsn() when the logical sector number cannot be
returned due to unrecognized media format.
Error handling logic will be used for those ASSERTs.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Paulo Alcantara <palcantara@suse.de>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This commit adds ASSERTs to address false positive reports of NULL
pointer dereference issues raised from static analysis with regard to
function ReadDirectoryEntry().
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Paulo Alcantara <palcantara@suse.de>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1247
For functions DuplicateFid() and DuplicateFe(), this commit will use error
handling logic instead of ASSERTs for memory allocation failure.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Paulo Alcantara <palcantara@suse.de>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The IA32 variant of InternalSyncCompareExchange64() is correct, but we can
simplify it. We don't need to load the lower 32 bits of ExchangeValue into
EBX in two steps (first into a general register, then into EBX); we can
ask GCC to populate EBX like that itself.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1208
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
(This patch is identical to the X64 half of the last one, except for the
InternalSyncCompareExchange32() -> InternalSyncCompareExchange64() and
"cmpxchgl" -> "cmpxchgq" replacements.)
The CMPXCHG instruction has the following operands:
- AX (implicit, CompareValue): input and output
- destination operand (*Value): input and output
- source operand (ExchangeValue): input
The X64 version of InternalSyncCompareExchange64() attempts to mark both
CompareValue and (*Value) as input/output, but it doesn't use the
appropriate constraints for either operand.
Fix these issues. Furthermore, prefer the short "+" constraint for I/O
operands over the <output-operand-number> constraint that can be applied
to the input instances of I/O operands.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1208
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
(This patch is identical to the last one, except for the
InternalSyncCompareExchange16() -> InternalSyncCompareExchange32() and
"cmpxchgw" -> "cmpxchgl" replacements.)
The CMPXCHG instruction has the following operands:
- AX (implicit, CompareValue): input and output
- destination operand (*Value): input and output
- source operand (ExchangeValue): input
The IA32 version of InternalSyncCompareExchange32() correctly marks
CompareValue as input/output, but it marks (*Value) only as input.
The X64 version of InternalSyncCompareExchange32() attempts to mark both
CompareValue and (*Value) as input/output, but it doesn't use the
appropriate constraints for either operand.
Fix these issues. Furthermore, prefer the short "+" constraint for I/O
operands over the <output-operand-number> constraint that can be applied
to the input instances of I/O operands.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1208
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The CMPXCHG instruction has the following operands:
- AX (implicit, CompareValue): input and output
- destination operand (*Value): input and output
- source operand (ExchangeValue): input
The IA32 version of InternalSyncCompareExchange16() correctly marks
CompareValue as input/output, but it marks (*Value) only as input.
The X64 version of InternalSyncCompareExchange16() attempts to mark both
CompareValue and (*Value) as input/output, but it doesn't use the
appropriate constraints for either operand.
Fix these issues. Furthermore, prefer the short "+" constraint for I/O
operands over the <output-operand-number> constraint that can be applied
to the input instances of I/O operands.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1208
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The "GccInline.c" files have some inconsistent whitespace, and missing (or
incorrect) operand comments. Fix and unify them.
This patch doesn't change behavior.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1208
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=415
When SetVariable() to a time based auth variable with APPEND_WRITE
attribute, and if the EFI_VARIABLE_AUTHENTICATION_2.TimeStamp in
the input Data is earlier than current value, it will cause timestamp
zeroing.
This issue may bring time based auth variable downgrade problem.
For example:
A vendor released three certs at 2014, 2015, and 2016, and system
integrated the 2016 cert. User can SetVariable() with 2015 cert and
APPEND_WRITE attribute to cause timestamp zeroing first, then
SetVariable() with 2014 cert to downgrade the cert.
This patch fixes this issue.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
This commit adds checks to make sure the UFS devices do not return more
data than the driver expected.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Per USB HID spec, the buffer holding key codes should at least 3-byte
long.
Today's code assumes that the key codes buffer length is longer than
3-byte and unconditionally accesses the key codes buffer.
It's incorrect.
The patch fixes the issue by returning Device Error when the
length is less than 3-byte.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Steven Shi <steven.shi@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Per USB HID spec, the buffer holding key codes should at least 3-byte
long.
Today's code assumes that the key codes buffer length is longer than
3-byte and unconditionally accesses the key codes buffer.
It's incorrect.
The patch fixes the issue by returning Device Error when the
length is less than 3-byte.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Steven Shi <steven.shi@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Per USB HID spec, the buffer holding key codes should be 8-byte
long.
Today's code assumes that the key codes buffer length is 8-byte
long and unconditionally accesses the key codes buffer.
It's incorrect.
The patch fixes the issue by returning Device Error when the
length is less than 8-byte.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Steven Shi <steven.shi@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Today's implementation doesn't check whether the length of
descriptor is valid before using it.
The patch fixes this issue.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Today's implementation reads the Type/Length field in the USB
descriptors data without checking whether the offset to read is
beyond the data boundary.
The patch fixes this issue.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
UsbBootReadWriteBlocks() and UsbBootReadWriteBlocks16() use a UINT16
local variable to hold the value of
USB_BOOT_MAX_CARRY_SIZE (=0x10000) / BlockSize.
When BlockSize is 1, the UINT16 local variable is set to 0x10000
but the high-16 bits are truncated resulting the final value be 0.
It causes the while-loop in the two functions accesses 0 block in
each loop, resulting the loop never ends.
The patch fixes the two functions to make sure no integer overflow
happens.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Steven Shi <steven.shi@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The change doesn't have functionality impact.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Benjamin You <benjamin.you@intel.com>
This is the part of commit 3948c510ed.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dongao Guo <dongao.guo@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Update the EOT tool to call the program itself instead of calling the Python API when parsing FV images.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hess Chen <hesheng.chen@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Acked-by: Jaben Carsey <jaben.carsey@intel.com>
Original it hard code to use "VOID*", this patch extend it to both
support VOID* and valid struct name.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Relational and equality operators require both operands to be of
the same type.
Treat the string 'A' and "A" as same type, but for "A" and L"A"
are not same type since one is general string, another is unicode
string.
True:'A'<'B', "A"<"B" 'A'<"B", L'A'<L'B', L"A"<L"B", L'A'<L"B"
Error:'A'<L'B', 'A'<L"B", "A'<L'B'
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The commit 84a52d4d03 will introduce
the new issue "Invalid offset value for Dynamic Vpd PCD". This patch
will fix the new issue, add 'DEFAULT' sku in to the AvailableSkuIdSet
variable.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: ZhiqiangX Zhao <zhiqiangx.zhao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
For void* type pcd in command line, if its value is string, then
convert the string value to array format. For example,
build --pcd gUefiOvmfPkgTokenSpaceGuid.PcdTest="c",
convert the pcd value from "c" to "{0x63,0x00}".
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: ZhiqiangX Zhao <zhiqiangx.zhao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Eric Dong
Jiaxin Wu
Yonghong Zhu
Carsey, Jaben
Star Zeng
Chasel, Chiu
Liming Gao
Jian J Wang
Hao Wu
Laszlo Ersek
Ruiyu Ni
Wonkyu Kim
Dongao Guo
Hess Chen
zhijufan
Zhaozh1x