R18611 only updated the logic to return correct property
when no property set to variable with wildcard name.
But VariablePropertySet needs the pointer of property data for set.
So roll back the change in VariablePropertyGetWithWildcardName at R18611,
and check the property revision first in VariablePropertyGet and
SetVariableCheck before using the property data.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18626 6f19259b-4bc3-4df7-8a09-765794883524
These messages don't report errors, hence they should be emitted as
EFI_D_INFO (or EFI_D_VERBOSE even).
Cc: Star Zeng <star.zeng@intel.com>
Cc: Drew Jones <drjones@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18621 6f19259b-4bc3-4df7-8a09-765794883524
The "success" messages in FtwRestart(), FtwAbort(), and FtwGetLastWrite()
should be logged on EFI_D_INFO level. We can also unify their format with
the __FUNCTION__ macro.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Drew Jones <drjones@redhat.com>
Suggested-by: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18620 6f19259b-4bc3-4df7-8a09-765794883524
The IsValidWorkSpace() function checks if the working block header of the
workspace is valid. A mismatch detected by this function is not
necessarily an error; it can happen with an as-yet unwritten flash chip,
which is e.g. common and normal when a new ArmVirtQemu virtual machine is
booted. Therefore downgrade the message emitted by IsValidWorkSpace() from
EFI_D_ERROR to EFI_D_INFO, and change the wording from "error" to
"mismatch".
The only caller of IsValidWorkSpace(), InitFtwProtocol(), handles all of
the following cases:
(1) IsValidWorkSpace() succeeds for the working block -- this is normal
operation,
(2) IsValidWorkSpace() fails for the working block, but succeeds for the
spare block -- InitFtwProtocol() then restores the working block from
the spare block,
(3) IsValidWorkSpace() fails for both the working and spare blocks --
InitFtwProtocol() reinitializes the full workspace.
In cases (2) and (3), InitFtwProtocol() logs additional messages about the
branch taken. Their current level is EFI_D_ERROR, but the messages are
arguably informative, not necessarily error reports.
Downgrade these messages from EFI_D_ERROR to EFI_D_INFO, so that they
don't clutter the debug output when the PcdDebugPrintErrorLevel mask only
enables EFI_D_ERROR (i.e., in a "silent" build).
These messages have annoyed / confused users; see for example:
- https://bugzilla.redhat.com/show_bug.cgi?id=1270279
Cc: Star Zeng <star.zeng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Drew Jones <drjones@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18619 6f19259b-4bc3-4df7-8a09-765794883524
The DHCP4 can have only one configured child instance so we need to reset
the DHCP4 child when leaving PXE driver's LoadFile() function, otherwise the
other programs which also need to use DHCP4 (like HTTP boot) will be impacted.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18615 6f19259b-4bc3-4df7-8a09-765794883524
Otherwise there will be build failure if without VarCheckUefiLib linked.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18612 6f19259b-4bc3-4df7-8a09-765794883524
to variable with wildcard name.
VarCheckLib has zeroed property for variable with wildcard name
and is waiting for property set. The code should return NULL
when no property set to variable with wildcard name, but not
return the zeroed property that will impact the functionality of
SetVariableCheck.
The issue does not appear with VarCheckUefiLib linked as the library
just has the expected property set.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18611 6f19259b-4bc3-4df7-8a09-765794883524
Refine the sample code, add extra ";" to keep consistent for the condition opcode in different use cases.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18607 6f19259b-4bc3-4df7-8a09-765794883524
In current case, if one key was requested to register twice, browser will override old hot key with new one. This behavior is not user friendly.
Now update the logic, return EFI_ALREADY_STARTED for this case. If user still want to override it, he must unregistered it first.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18604 6f19259b-4bc3-4df7-8a09-765794883524
PcdSet## has no error status returned, then the caller has no idea about whether the set operation is successful or not.
PcdSet##S were added to return error status and PcdSet## APIs were put in ifndef DISABLE_NEW_DEPRECATED_INTERFACES condition.
To adopt PcdSet##S and further code development with DISABLE_NEW_DEPRECATED_INTERFACES defined, we need to Replace PcdSet## usage with PcdSet##S.
Normally, DynamicDefault PCD set is expected to be success, but DynamicHii PCD set failure is a legal case.
So for DynamicDefault, we add assert when set failure. For DynamicHii, we add logic to handle it.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18603 6f19259b-4bc3-4df7-8a09-765794883524
PcdSet## has no error status returned, then the caller has no idea about whether the set operation is successful or not.
PcdSet##S were added to return error status and PcdSet## APIs were put in ifndef DISABLE_NEW_DEPRECATED_INTERFACES condition.
To adopt PcdSet##S and further code development with DISABLE_NEW_DEPRECATED_INTERFACES defined, we need to Replace PcdSet## usage with PcdSet##S.
Normally, DynamicDefault PCD set is expected to be success, but DynamicHii PCD set failure is a legal case.
For this case, PcdS3BootScriptTablePrivateDataPtr and PcdS3BootScriptTablePrivateSmmDataPtr are expected to be DynamicDefault,
so use PcdSet64S to instead of PcdSet64 and assert when set failure.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18599 6f19259b-4bc3-4df7-8a09-765794883524
Mark the DXE stack region as non-executable right before handing
off to the DXE core, by invoking the appropriate ArmLib function.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Feng Tian <Feng.Tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18588 6f19259b-4bc3-4df7-8a09-765794883524
When looping through all PCI functions, code should not look for functions
1-7 if function 0 is not present or if function 0 indicates the device is
not multifunction. Prior to this fix the code would use stale data in a
buffer to determine if a device is multifunction even if function 0 is not
present. This fixes a code bug and provides very small performance
improvements.
PCI 2.3 Specification states: They [multifunction devices] are also
required to always implement function 0 in the device. Implementing other
functions is optional and may be assigned in any order.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Joseph Shifflett <joseph.shifflett@hpe.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18574 6f19259b-4bc3-4df7-8a09-765794883524
Current implementation assumes the performance entry count has no change from
multiple GetPerformanceMeasurement() while loops, it may cause the allocated buffer
for PerfEntriesAsDxeHandle at the first loop to be overflowed if the following loop has
the count changed.
This patch is also to sync the change at
commit R17851 "IntelFrameworkModulePkg GenericBdsLib: Resolve array size mismatch".
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18561 6f19259b-4bc3-4df7-8a09-765794883524
Ip4Config2 protocol implementation must request for DNS server info when the
policy is set to DHCP. And when a DHCP server responds to it with a list of
DNS server addresses, it must parse it and set it for the instance. Without
this, nobody can do a Ip4Config->GetData for DNS server IPs before calling
Dns->Configure(). This will mean a DHCP is initiated when calling
Dns->Configure(), thus causing serious performance issues. This patch
attempts to address this issue.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <samer.el-haj-mahmoud@hpe.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18560 6f19259b-4bc3-4df7-8a09-765794883524
NetLibGetSystemGuid gets the UUID from SMBIOS table to use as the System GUID
(in DHCP and other network use cases). This change adds support to get the
UUID from either SMBIOS 2.x or 3.0, since SMBIOS 3.0 uses a different GUID in
the System Configuration Table.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <samer.el-haj-mahmoud@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18559 6f19259b-4bc3-4df7-8a09-765794883524
Some IDE controllers only update ID fields such as sector information on
specific commands such as the DIAG command.
The master/slave device is therefore selected both before and after
sending the DIAG command; otherwise reading the IDE registers yields the
master's ID fields.
(Reza's patch originally *moved* the master/slave selection from after the
DIAG command before it, however Feng asked for the original master/slave
select to be preserved; effectively making the master/slave select
*bracket* the DIAG command. See this subthread:
<http://thread.gmane.org/gmane.comp.bios.tianocore.devel/10545/focus=10550>.)
Cc: Alexander Graf <agraf@suse.de>
Cc: Reza Jelveh <reza.jelveh@tuhh.de>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Gabriel L. Somlo <somlo@cmu.edu>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Reza Jelveh <reza.jelveh@tuhh.de>
[feng.tian@intel.com: see above]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
[lersek@redhat.com: updated commit message]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18529 6f19259b-4bc3-4df7-8a09-765794883524
In a CloseEvent, an UnregisterProtocolNotify is done unconditionally.
There is a penalty associated with searching the protocol database on
every CloseEvent and impacts performance, especially during Network IO.
Unregister needs to be done only if the Event is for a RegisterProtocolNotify.
So extend the ExFlag in IEVENT to a UINT8 and define new flags that can
be set to indicate if the Event is part of a group, or registered on a
protocol notify. Then in CloseEvent, call UnregisterProtocolNotify only
if the register protocol notify flag is set.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <samer.el-haj-mahmoud@hpe.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18517 6f19259b-4bc3-4df7-8a09-765794883524
Take the range in the resource descriptor HOB for the memory region described
by the PHIT as higher priority if it is big enough. It can make the memory bin
allocated to be at the same memory region with PHIT that has more better compatibility
to avoid memory fragmentation for some code practices assume and allocate <4G ACPI memory.
Also let the minimal memory size needed include the total memory bin size needed to
make sure memory bin could be allocated successfully.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18503 6f19259b-4bc3-4df7-8a09-765794883524
The HOB List relocation should be at after all the tested memory resources added
(except the memory space that covers HOB List) to the memory services,
because the memory resource found in CoreInitializeMemoryServices()
may have not enough remaining resource for HOB List.
And the memory space that covers HOB List should be processed
after HOB List relocation to avoid the resources allocated by others
to corrupt HOB List before its relocation.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18499 6f19259b-4bc3-4df7-8a09-765794883524
The pointer to the destination string changed,the max length also changed.Previous change neglect this point.
And base on the code logic,we can use StrCatS to replace StrCpyS.Now this patch is to fix this bug.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18497 6f19259b-4bc3-4df7-8a09-765794883524
Certain PCI device may have capability pointing to itself.
Update LocateCapabilityRegBlock() to break when detecting such loop.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18473 6f19259b-4bc3-4df7-8a09-765794883524
Allow platforms to instantiate this PCD as PcdsDynamic and PcdsDynamicEx
too, not just PcdsFixedAtBuild and PcdsPatchableInModule.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18468 6f19259b-4bc3-4df7-8a09-765794883524
What to do:
1. Remove a hidden assumption "No SMM driver writes BootScript between
SmmReadyToLock and S3SleepEntryCallback".
1.1. Use SmmExitBootServices and SmmLegacyBoot notification to record
AtRuntime flag.
1.2. Use mBootScriptDataBootTimeGuid LockBox to save boot time boot
script data to handle potential INSERT boot script at runtime in SMM.
2. Do not depend on OS to help restore ACPINvs data and use
EfiReservedMemoryType instead of EfiACPIMemoryNVS.
2.1. Use mBootScriptSmmPrivateDataGuid LockBox to save boot script
SMM private data with BackFromS3 = TRUE at runtime. S3 resume
will help restore it to tell the Library the system is back
from S3.
Why to do:
1. The hidden assumption "No SMM driver writes BootScript between
SmmReadyToLock and S3SleepEntryCallback" will cause confusion to
the library's consumer and block the usage of "SMM driver writes
BootScript after SmmReadyToLock". So Remove the assumption.
2. In original code, there might be a corner case that malicious
code patch ACPINvs boot TableLength field same as SMM boot script.
So that it can skip the table restore. The impact is that BootScript
in SMM may be overridden by malicious code.
--------------------
CopyMem ((VOID*)&TableHeader, (VOID*)mS3BootScriptTablePtr->TableBase, sizeof(EFI_BOOT_SCRIPT_TABLE_HEADER));
if (mS3BootScriptTablePtr->TableLength + sizeof(EFI_BOOT_SCRIPT_TERMINATE) != TableHeader.TableLength) { // TableLength is in NVS
......
//
// NOTE: We should NOT use TableHeader.TableLength, because it is already updated to be whole length.
//
mS3BootScriptTablePtr->TableLength = (UINT32)(mLockBoxLength - sizeof(EFI_BOOT_SCRIPT_TERMINATE)); ? This line can be skipped.
--------------------
So use EfiReservedMemoryType instead of EfiACPIMemoryNVS as the code
has been updated to not depend on OS to help restore ACPINvs data.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18467 6f19259b-4bc3-4df7-8a09-765794883524
The driver binding start function in SNP.c goes through all the BARs and get
the last BAR index for use. Theoretically it should work with all valid BARs,
but we got reports some device did always use the first valid BAR, so we change
the logic in SNP to use the first found BAR index instead of the last one.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18455 6f19259b-4bc3-4df7-8a09-765794883524
The specification of the EFI_EXT_SCSI_PASS_THRU_PROTOCOL.PassThru()
function documents the EFI_BAD_BUFFER_SIZE return status, and the
EFI_EXT_SCSI_STATUS_HOST_ADAPTER_DATA_OVERRUN_UNDERRUN host adapter
status.
These allow an EFI_EXT_SCSI_PASS_THRU_PROTOCOL implementation to request
higher layers in the stack (in this instance, UefiScsiLib and ScsiDiskDxe)
to break up the transfer into smaller pieces.
These conditions percolate up the stack correctly: the retry loops in
ScsiDiskDxe's ScsiDiskReadSectors() and ScsiDiskWriteSectors() functions
correctly and transparently update the transfer size (ByteCount),
accommodating any shortening requested by lower levels of the stack. After
the loop -- if the request ultimately succeeds -- SectorCount is even
recalculated from the final ByteCount, to see how many sectors the outer
loop should advance.
However, the inner (ie. retry) loops both have the same error: when the
underlying protocols request the transfer to be shortened, the decrease in
transfer size (ie. ByteCount) should immediately be reflected in
SectorCount. Otherwise the sector count encoded in the CDB will exceed the
transfer size, which is a permanent error.
This issue has been witnessed while booting
en_windows_8.1_pro_n_vl_with_update_x86_dvd_6051127.iso
on the 32-bit build of OVMF, from a virtio-scsi CD-ROM:
(1) "cdboot.efi" correctly requested (from far atop) a long read:
Timeout=940000000
CdbLength=10
DataDir=Read
InTransferLength=134215680
OutTransferLength=0
SenseDataLength=108
Cdb: 28 00 00 00 25 DD 00 FF FF 00
^ ^^^^^^^^^^^ ^^^^^
| | |
| | number of 2KB sectors to read,
| | corresponding to 2048 * 65535 = 134215680 bytes
| | (see InTransferLength above)
| |
| LBA to read from
|
READ (10)
(2) In turn, the EFI_EXT_SCSI_PASS_THRU_PROTOCOL.PassThru() function
provided by "OvmfPkg/VirtioScsiDxe/VirtioScsi.c" asked for the request
to be shortened:
InTransferLength=16776704
OutTransferLength=16776704
SenseDataLength=0
HostAdapterStatus=EFI_EXT_SCSI_STATUS_HOST_ADAPTER_DATA_OVERRUN_UNDERRUN
TargetStatus=0
Status=EFI_BAD_BUFFER_SIZE
(3) Then ScsiDiskReadSectors() in
"MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDisk.c" retried the request
with correctly shortened transfer length, but incorrectly unchanged
sector count:
Timeout=940000000
CdbLength=10
DataDir=Read
InTransferLength=16776704 <--- updated as requested
OutTransferLength=0
SenseDataLength=108
Cdb: 28 00 00 00 25 DD 00 FF FF 00
^ ^^^^^^^^^^^ ^^^^^
| | |
| | not changed!
| |
| LBA to read from
|
READ (10)
(4) Since 65535 sectors of 2KB each wouldn't fit in a buffer of approx.
16MB, QEMU's virtio-scsi controller unconditionally rejected this
request with VIRTIO_SCSI_S_OVERRUN, which VirtioScsiDxe then mapped
to:
InTransferLength=16776704
OutTransferLength=0
SenseDataLength=0
HostAdapterStatus=EFI_EXT_SCSI_STATUS_HOST_ADAPTER_DATA_OVERRUN_UNDERRUN
TargetStatus=0
Status=EFI_DEVICE_ERROR
(5) After two more tries of the same, ScsiDiskDxe passed up the error,
which ultimately caused "cdboot.efi" to BSOD.
Many thanks to Larry Cleeton from Microsoft for helping debug
"cdboot.efi".
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18438 6f19259b-4bc3-4df7-8a09-765794883524
Acting specifically upon this error condition from UefiScsiLib (and
ultimately from EFI_EXT_SCSI_PASS_THRU_PROTOCOL.PassThru()) in the
- ScsiDiskRead10(),
- ScsiDiskWrite10(),
- ScsiDiskRead16(),
- ScsiDiskWrite16()
functions allows us to retry these operations from ScsiDiskReadSectors()
and ScsiDiskWriteSectors(), with adjusted transfer sizes, without
investigating further error details like Host Adapter Status, Target
Status, and Sense Data.
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18437 6f19259b-4bc3-4df7-8a09-765794883524
PXE driver's LoadFile protocol should check the input parameter
FilePath to see whether it's a supported device path.If not,
it should return invalid parameter, do not continue PXE boot.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18435 6f19259b-4bc3-4df7-8a09-765794883524
The mBmPerfHeader.Count isn't reset to 0 in BmWriteBootToOsPerformanceData()
so when the actual performance data entry count exceeds the LimitCount,
the performance data collection breaks on condition
if (mBmPerfHeader.Count == LimitCount), but 2nd time calling this function
will not break on condition if (mBmPerfHeader.Count == LimitCount) because
the mBmPerfHeader.Count always bigger than LimitCount, which results buffer
overrun.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18417 6f19259b-4bc3-4df7-8a09-765794883524
Add driver to produce EFI_REGULAR_EXPRESSION_PROTOCOL. Based on
Oniguruma v5.9.6 (BSD 2-clause license), which provides full Unicode
support, and POSIX ERE and Perl regex syntaxes.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Cecil Sheng <cecil.sheng@hpe.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18413 6f19259b-4bc3-4df7-8a09-765794883524
Add driver to produce EFI_REGULAR_EXPRESSION_PROTOCOL. Based on
Oniguruma v5.9.6 (BSD 2-clause license), which provides full Unicode
support, and POSIX ERE and Perl regex syntaxes.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Cecil Sheng <cecil.sheng@hpe.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18411 6f19259b-4bc3-4df7-8a09-765794883524
Our tool can support OrderedList which has default value,but doesn't update the
source code in HiiDatabase when parse the ifr data.Now update the code and add
test case in DriverSample.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18388 6f19259b-4bc3-4df7-8a09-765794883524
Modified the logic in Ip4Dxe and Ip6Dxe to not locate EFI_IPSEC2_PROTOCOL on each
message transmit/receive. Instead, register a callback in the drivers entry points
on the IpSec protocol installation, and process only if the protocol is installed.
This speeds up the network stacks when IpSec is not installed since there is a
penalty associated with searching the entire handle database on each packet processing.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <samer.el-haj-mahmoud@hp.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18365 6f19259b-4bc3-4df7-8a09-765794883524
Previously construct Default Value in AltResp for string opcode is String Id,
Now change it to string value if the string opcode has default value.
This change is compatible for SetupBrowser to handle.And add default value
for string in DriverSample to test this case.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18337 6f19259b-4bc3-4df7-8a09-765794883524
Convert the UNIX to DOS end of line format.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18324 6f19259b-4bc3-4df7-8a09-765794883524
There may be anti-flash wear out feature to forbid erase operation after end of dxe.
The code is missing some error handling for erase operation failure,
it should return directly after the erase operation failed.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18320 6f19259b-4bc3-4df7-8a09-765794883524
The error handling for timeout case is enhanced to remove TDs from
transfer ring. The original code only removed s/w URB, but the h/w
transfer descriptor TDs didn't get removed. It would cause data lost
for data stream peripheral, such as usb-to-serial device, from the
s/w perspective.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Baraneedharan Anbazhagan <anbazhagan@hp.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18313 6f19259b-4bc3-4df7-8a09-765794883524
Star Zeng
Laszlo Ersek
Fu Siyuan
Eric Dong
Ard Biesheuvel
Joseph Shifflett
Samer El-Haj-Mahmoud
Reza Jelveh
Dandan Bi
Ruiyu Ni
Zhang Lubo
Cecil Sheng
Samer El-Haj-Mahmoud
Sunny Wang
Liming Gao
Jiaxin Wu
Feng Tian