There are several network stack drivers in MdeModulePkg or NetworkPkg.
Currently, we only use the drivers from MdeModulePkg which only provides
the IPv4 support. This commit adds the IPv6 drivers in NetworkPkg into
OVMF.
Here is the table of drivers from Laszlo.
currently included related driver add or replace
from MdeModulePkg in NetworkPkg from NetworkPkg
------------------ -------------- ---------------
SnpDxe n/a n/a
DpcDxe n/a n/a
MnpDxe n/a n/a
VlanConfigDxe n/a n/a
ArpDxe n/a n/a
Dhcp4Dxe Dhcp6Dxe add
Ip4ConfigDxe Ip6Dxe add
Ip4Dxe Ip6Dxe add
Mtftp4Dxe Mtftp6Dxe add
Tcp4Dxe TcpDxe replace
Udp4Dxe Udp6Dxe add
UefiPxeBcDxe UefiPxeBcDxe replace
IScsiDxe IScsiDxe replace
Since the TcpDxe, UefiPxeBcDxe, and IScsiDxe drivers in NetworkPkg also
support IPv4, we replace the ones in MdeModulePkg.
To enable the IPv6 support, build OVMF with "-D NETWORK_IP6_ENABLE".
A special case is NetworkPkg/IScsiDxe. It requires openssl. For convenience,
NetworkPkg/IScsiDxe is enabled only if both IPv6 and SecureBoot are enabled.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Lin <glin@suse.com>
[lersek@redhat.com: typo fix in commit message; specil -> special]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16543 6f19259b-4bc3-4df7-8a09-765794883524
Link DXE_SMM_DRIVER, UEFI_DRIVER, UEFI_APPLICATION, and SMM_CORE against
a valid, non-asserting version of PcdLib, then switch them over to using
the "Dxe" instance of AcpiTimerLib (instead of the "Base" version).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16378 6f19259b-4bc3-4df7-8a09-765794883524
Since in OVMF both PEI_CORE and PEIM run from RAM, and thus may
utilize global variables, use the "Base" AcpiTimerLib instance
(instead of BaseRom) to take advantage of the improved efficiency
of storing the timer register IO address in a global variable.
This leaves only SEC using the BaseRomAcpiTimerLib instance.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16377 6f19259b-4bc3-4df7-8a09-765794883524
Remove local power management register access macros in favor of
factored-out ones in OvmfPkg/Include/OvmfPlatforms.h
Next, AcpiTimerLib is split out into three instances, for use during
various stages:
- BaseRom: used during SEC, PEI_CORE, and PEIM;
- Dxe: used during DXE_DRIVER and DXE_RUNTIME_DRIVER;
- Base: used by default during all other stages.
Most of the code remains in AcpiTimerLib.c, to be shared by all
instances. The two platform-dependent methods (constructor and
InternalAcpiGetTimerTick) are provided separately by source files
specific to each instance, namely [BaseRom|Base|Dxe]AcpiTimerLib.c.
Since pre-DXE stages can't rely on storing data in global variables,
methods specific to the "BaseRom" instance will call platform
detection macros each time they're invoked.
The "Base" instance calls platform detection macros only from its
constructor, and caches the address required by InternalAcpiTimerTick
in a global variable.
The "Dxe" instance is very similar to "Base", except no platform
detection macros are called at all; instead, the platform type is
read via a dynamic PCD set from PlatformPei.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16376 6f19259b-4bc3-4df7-8a09-765794883524
Set from PEI, this PCD allows subsequent stages (specifically
DXE_DRIVER and DXE_RUNTIME_DRIVER) to infer the underlying platform
type (e.g. PIIX4 or Q35/MCH) without the need to further query the
Host Bridge for its Device ID.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16374 6f19259b-4bc3-4df7-8a09-765794883524
On a physical screen such a low graphics resolution would lead to huge
glyphs (the text resolution is 80x25, centered, with 8x19 pixel glyphs).
But in a virtual machine it just saves screen real estate on the client,
by removing the black bands.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16311 6f19259b-4bc3-4df7-8a09-765794883524
PlatformBdsEnterFrontPage() already implements a keypress wait (for
entering the setup utility at boot) with a nice progress bar, only OVMF
has not been using it.
Removing our custom code and utilizing PlatformBdsEnterFrontPage()'s
builtin wait has the following benefits:
- It simplifies OVMF's BDS code.
- Because now we call PlatformBdsEnterFrontPage() unconditionally, it
actually has a chance to look at the EFI_OS_INDICATIONS_BOOT_TO_FW_UI
bit of the "OsIndications" variable, improving compliance with the UEFI
specification. References:
- https://bugzilla.redhat.com/show_bug.cgi?id=1153927
- http://thread.gmane.org/gmane.comp.bios.tianocore.devel/10487
- The progress bar looks nice. (And it keeps the earlier behavior intact,
when the user presses a key on the TianoCore splash screen.)
In any case, we set the timeout to 0 (which doesn't show the progress
bar and proceeds to the boot options immediately) in order to keep the
boot time down.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16310 6f19259b-4bc3-4df7-8a09-765794883524
A ParaVirtualize block driver.
Change in V4:
- Replace the license by the commonly used file header text.
- Add brief description for the driver.
Change in V3:
- enable compilation for Ia32 and Ia32X64
- fix version (driver binding)
Change in V2:
- Add minimal support for controller name
- Remove stuff about BlockIo2
- Little cleanup
- Licenses and file headers
- Rename XenbusIo into XenBusIo
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16272 6f19259b-4bc3-4df7-8a09-765794883524
This includes Component Name and Driver Binding.
Change in V4:
- Replace the license by the commonly used file header text.
- Add brief description for the driver.
Change in V3:
- enable compilation for Ia32 and Ia32X64
- fix version (driver binding)
Change in V2:
- Simple support of controller name.
- Cleaning up comments, files header.
- Add Licenses
- Rename XenbusDxe to XenBusDxe.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16258 6f19259b-4bc3-4df7-8a09-765794883524
OvmfPkg forked SecureBootConfigDxe from SecurityPkg in SVN r13635 (git
commit 8c71ec8f). Since then, the original (in
"SecurityPkg/VariableAuthenticated/SecureBootConfigDxe") has diverged
significantly.
The initial diff between the original and the fork, when the fork was made
(ie. at SVN r13635), reads as follows:
> diff -ur SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootConfig.vfr OvmfPkg/SecureBootConfigDxe/SecureBootConfig.vfr
> --- SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootConfig.vfr 2014-09-30 23:35:28.598067147 +0200
> +++ OvmfPkg/SecureBootConfigDxe/SecureBootConfig.vfr 2014-08-09 02:40:35.824851626 +0200
> @@ -51,7 +51,7 @@
> questionid = KEY_SECURE_BOOT_ENABLE,
> prompt = STRING_TOKEN(STR_SECURE_BOOT_PROMPT),
> help = STRING_TOKEN(STR_SECURE_BOOT_HELP),
> - flags = INTERACTIVE | RESET_REQUIRED,
> + flags = INTERACTIVE,
> endcheckbox;
> endif;
>
> @@ -158,7 +158,7 @@
> questionid = KEY_SECURE_BOOT_DELETE_PK,
> prompt = STRING_TOKEN(STR_DELETE_PK),
> help = STRING_TOKEN(STR_DELETE_PK_HELP),
> - flags = INTERACTIVE | RESET_REQUIRED,
> + flags = INTERACTIVE,
> endcheckbox;
> endif;
> endform;
> diff -ur SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootConfigDxe.inf OvmfPkg/SecureBootConfigDxe/SecureBootConfigDxe.inf
> --- SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootConfigDxe.inf 2014-09-30 23:35:28.598067147 +0200
> +++ OvmfPkg/SecureBootConfigDxe/SecureBootConfigDxe.inf 2014-09-30 23:35:28.577067027 +0200
> @@ -1,5 +1,8 @@
> ## @file
> -# Component name for SecureBoot configuration module.
> +# Component name for SecureBoot configuration module for OVMF.
> +#
> +# Need custom SecureBootConfigDxe for OVMF that does not force
> +# resets after PK changes since OVMF doesn't have persistent variables
> #
> # Copyright (c) 2011 - 2012, Intel Corporation. All rights reserved.<BR>
> # This program and the accompanying materials
> diff -ur SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootConfigImpl.c OvmfPkg/SecureBootConfigDxe/SecureBootConfigImpl.c
> --- SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootConfigImpl.c 2014-09-30 23:35:28.599067153 +0200
> +++ OvmfPkg/SecureBootConfigDxe/SecureBootConfigImpl.c 2014-09-30 23:35:28.578067033 +0200
> @@ -2559,7 +2559,7 @@
> NULL
> );
> } else {
> - *ActionRequest = EFI_BROWSER_ACTION_REQUEST_RESET;
> + *ActionRequest = EFI_BROWSER_ACTION_REQUEST_SUBMIT;
> }
> break;
The commit message is not overly verbose:
OvmfPkg: Add custom SecureBootConfigDxe that doesn't reset
We don't force a platform reset for OVMF when PK is changed in custom
mode setup.
But the INF file hunk is telling:
Need custom SecureBootConfigDxe for OVMF that does not force resets
after PK changes since OVMF doesn't have persistent variables
We do have persistent variables now. Let's disable the (now obsolete)
OvmfPkg fork, and revert to the (well maintained) SecurityPkg-provided
config driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Gary Lin <glin@suse.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16191 6f19259b-4bc3-4df7-8a09-765794883524
The "complete" QEMU fw_cfg ACPI loader will need to look up downloaded
blobs by name, in order to implement the AddPointer and AddChecksum
commands. Introduce OrderedCollectionLib to support such indexing.
BaseOrderedCollectionRedBlackTreeLib is a BASE module, hence add the
OrderedCollectionLib resolution to the main [LibraryClasses] section.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16155 6f19259b-4bc3-4df7-8a09-765794883524
SVN r16092 ('ShellPkg: Add a new library for "bcfg" command') introduced a
new library class (and an instance for it) called BcfgCommandLib.
SVN r16093 ('ShellPkg: Use the new library for "bcfg" command') rebased
ShellPkg to the new library, introducing a new [LibraryClasses]
dependency.
Library classes must be resolved to library instances in client platform
descriptions (DSC's). Since OVMF is a client platform, import the same
library resolution as seen in "ShellPkg/ShellPkg.dsc" (added in SVN
r16092).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16095 6f19259b-4bc3-4df7-8a09-765794883524
VideoDxe is a UEFI_DRIVER, so it has by default a null instance
of PcdLib. It accesses two PCDs that are now dynamic
(gEfiMdeModulePkgTokenSpaceGuid.PcdVideoHorizontalResolution
and gEfiMdeModulePkgTokenSpaceGuid.PcdVideoVerticalResolution).
Similar to r15362 (OvmfPkg: non-null PcdLib instance for
GraphicsConsoleDxe, 2014-03-22), we need to specify a non-null
instance of PcdLib.
This patch unbreaks the CSM VideoDxe module for OvmfPkg.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15421 6f19259b-4bc3-4df7-8a09-765794883524
This DXE driver will load/save persistent values for OVMF's config knobs,
plus expose those knobs via HII.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15364 6f19259b-4bc3-4df7-8a09-765794883524
GraphicsConsoleDxe (a UEFI_DRIVER under MdeModulePkg/Universal/Console)
determines the preferred video resolution from the dynamic PCDs
- gEfiMdeModulePkgTokenSpaceGuid.PcdVideoHorizontalResolution
- gEfiMdeModulePkgTokenSpaceGuid.PcdVideoVerticalResolution
In one of the next patches, we'd like to change these PCDs. In order for
GraphicsConsoleDxe to retrieve the new values dynamically,
- it must be linked with the non-null instance of PcdLib,
- OvmfPkg must provide dynamic defaults.
We keep MdeModulePkg's 800x600 default resolution. (The UEFI specification
requires video drivers to support 800x600.)
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15362 6f19259b-4bc3-4df7-8a09-765794883524
This driver (from
"MdeModulePkg/Universal/Acpi/BootScriptExecutorDxe/BootScriptExecutorDxe.inf")
is first loaded normally during DXE. When the
EFI_DXE_SMM_READY_TO_LOCK_PROTOCOL is installed by any DXE driver (purely
as a form of notification), the driver reloads itself to reserved memory.
During S3 Resume / PEI, the driver image is executed from there. In order
to access the boot script saved during S3 Suspend, LockBox access is
needed.
The boot script is transferred internal to PiDxeS3BootScriptLib:
Both S3SaveStateDxe and BootScriptExecutorDxe are statically linked
against PiDxeS3BootScriptLib. Whichever is loaded first (during normal
boot, in the DXE phase), allocates the root storage for the script. The
address is then passed between the PiDxeS3BootScriptLib instances living
in the two separate drivers thru the dynamic
PcdS3BootScriptTablePrivateDataPtr PCD.
Dependencies:
BootScriptExecutorDxe
gEfiLockBoxProtocolGuid [OvmfPkg/AcpiS3SaveDxe]
S3BootScriptLib [PiDxeS3BootScriptLib]
SmbusLib [BaseSmbusLibNull]
LockBoxLib [OvmfPkg/Library/LockBoxLib]
LockBoxLib [OvmfPkg/Library/LockBoxLib]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15307 6f19259b-4bc3-4df7-8a09-765794883524
"MdeModulePkg/Universal/Acpi/S3SaveStateDxe/S3SaveStateDxe.inf" produces
the EFI_S3_SAVE_STATE_PROTOCOL which allows creation and saving of an S3
Boot Script, to be replayed in PEI during S3 Resume. The script contains
opcodes and opcode arguments to configure CPU, PCI and IO resources.
S3SaveStateDxe relies on the S3BootScriptLib library. The Null
implementation is not useful for actually saving the boot script, we need
the PiDxeS3BootScriptLib instance.
The PiDxeS3BootScriptLib library instance depends on LockBoxLib,
implemented for OVMF in one of the previous patches.
PiDxeS3BootScriptLib also depends on SmbusLib. For now we opt for the Null
instance of the latter. It means that SMBus commands in the boot script
will have no effect when interpreted during S3 Resume. This should be fine
for OvmfPkg and QEMU.
EFI_S3_SAVE_STATE_PROTOCOL [S3SaveStateDxe]
S3BootScriptLib [PiDxeS3BootScriptLib]
SmbusLib [BaseSmbusLibNull]
LockBoxLib [OvmfPkg/Library/LockBoxLib]
When the EFI_DXE_SMM_READY_TO_LOCK_PROTOCOL is installed by any DXE driver
(purely as a form of notification), the S3SaveStateDxe driver saves the
boot script to EfiACPIMemoryNVS, and links it into the LockBox.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15304 6f19259b-4bc3-4df7-8a09-765794883524
"OvmfPkg/AcpiS3SaveDxe/AcpiS3SaveDxe.inf" (originally:
"IntelFrameworkModulePkg/Universal/Acpi/AcpiS3SaveDxe/AcpiS3SaveDxe.inf")
produces the EFI_ACPI_S3_SAVE_PROTOCOL.
When found, this protocol is automatically invoked by
BdsLibBootViaBootOption(), in file
"IntelFrameworkModulePkg/Library/GenericBdsLib/BdsBoot.c", right before
booting a boot option, to save ACPI S3 context.
At that point during BDS, our AcpiPlatformDxe driver will have installed
the FACS table (which AcpiS3SaveDxe has a use-time dependency upon).
With regard to dependencies: AcpiS3SaveDxe implements
EFI_ACPI_S3_SAVE_PROTOCOL by relying on LockBoxLib.
BdsLibBootViaBootOption()
EFI_ACPI_S3_SAVE_PROTOCOL [AcpiS3SaveDxe]
LockBoxLib [OvmfPkg/Library/LockBoxLib]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
[jordan.l.justen@intel.com: Remove EmuNvramLib]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15303 6f19259b-4bc3-4df7-8a09-765794883524
The S3 suspend/resume infrastructure depends on the LockBox library class.
The edk2 tree currently contains Null and SMM instances. The Null instance
is useless, and the SMM instance would require SMM emulation by including
the SMM core and adding several new drivers, which is deemed too complex.
Hence add a simple LockBoxLib instance for OVMF.
jordan.l.justen@intel.com:
* use PCDs instead of EmuNvramLib
- clear memory in PlatformPei on non S3 boots
* allocate NVS memory and store a pointer to that memory
- reduces memory use at fixed locations
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15301 6f19259b-4bc3-4df7-8a09-765794883524
"UefiCpuPkg/Universal/Acpi/S3Resume2Pei/S3Resume2Pei.inf" produces the
EFI_PEI_S3_RESUME2 PEIM-to-PEIM Interface.
When the platform-specific initialization code (in PEI) sets the Boot Mode
to BOOT_ON_S3_RESUME, the DXE IPL (which is the last step in PEI) skips
the DXE phase entirely, and executes the S3 Resume PEIM through the
EFI_PEI_S3_RESUME2 interface instead. (See DxeLoadCore() in
"MdeModulePkg/Core/DxeIplPeim/DxeLoad.c".)
S3Resume2Pei depends on LockBoxLib.
EFI_PEI_S3_RESUME2 [S3Resume2Pei]
LockBoxLib [OvmfPkg/Library/LockBoxLib]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15300 6f19259b-4bc3-4df7-8a09-765794883524
The Linux persistent store (pstore) feature serves, among other things,
for saving the trailing portion of the dmesg in case of a kernel oops. One
backend for the pstore facility is "efivars", ie. non-volatile UEFI
variables.
Linux splits the tail of the dmesg that is to be dumped in 1KB chunks, and
tries to save each chunk as a specially (and differently) named
non-volatile variable. The 1KB chunk size accounts for the variable data
only; Linux expects this size to be available per variable *without*
accounting for the variable name or any firmware-internal overhead.
For non-authenticated (ie. non-secure-boot) variables, OvmfPkg currently
sets the per-variable limit to 0x400 (1KB) through PcdMaxVariableSize.
However this PCD determines the size *before* subtracting the internal
overhead (which is sizeof(VARIABLE_HEADER) == 0x20 bytes for
non-authenticated variables, see
"MdeModulePkg/Include/Guid/VariableFormat.h"), and also before subtracting
the given variable's UCS-2 encoded name (including the trailing 0x0000).
Linux maximizes these special variable names in DUMP_NAME_LEN==52 code
points (including the trailing NUL). Hence we must provide at least
0x020 == sizeof(VARIABLE_HEADER), for the internal overhead
0x068 == 2 * 52, for the UCS-2 encoded name, including trailing 0x0000
0x400 for the variable body
-----
0x488 == 1160
bytes in PcdMaxVariableSize, so that Linux's efivars-backed pstore can
work even on non-secure-boot builds of OVMF.
However, as PcdMaxVariableSize=0x2000 has proven reasonable when secure
boot is enabled, it should also be okay when secure boot is disabled; so
for simplicity's sake set PcdMaxVariableSize to 0x2000 unconditionally.
Tested-by: Seiji Aguchi <seiji.aguchi@hds.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15142 6f19259b-4bc3-4df7-8a09-765794883524
The QemuFwCfgSecLib library instance
- is stateless,
- has no library constructor,
- is available to SEC client code,
- must be queried with QemuFwCfgIsAvailable() before use,
- is restricted to SEC in order to limit the explicit querying
requirement. (There is no current user.)
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15046 6f19259b-4bc3-4df7-8a09-765794883524
This change replaces the accesses to the PCI bus from the Block, Scsi and Net drivers by
the use of the new VIRTIO_DEVICE_PROTOCOL protocol that abstracts the transport layer.
It means these drivers can be used on PCI and MMIO transport layer.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
v5:
- VirtioFlush(): update comment block in VirtioLib.[hc]; error code is
propagated from VirtIo->SetQueueNotify().
- VirtioBlkInit(): jump to Failed label if SetPageSize() fails
- VirtioBlkInit(): fixup comment, and add error handling, near
SetQueueNum() call
- VirtioBlkDriverBindingStart(): remove redundant (always false) check for
a subsystem device ID different from VIRTIO_SUBSYSTEM_BLOCK_DEVICE;
VirtioBlkDriverBindingSupported() handles it already
- VirtioNetGetFeatures(): update stale comment block
- VirtioNetGetFeatures(): retrieve MAC address byte for byte (open-coded
loop)
- VirtioNetDriverBindingStart(): remove redundant (always false) check for
a subsystem device ID different from VIRTIO_SUBSYSTEM_NETWORK_CARD;
VirtioNetDriverBindingSupported() handles it already
- VirtioNetInitRing(): call SetQueueNum() and SetQueueAlign() for proper
MMIO operation
- VirtioNetInitialize(): fix destination error label for when
SetPageSize() fails
- VirtioScsi.c: fix comment block of VIRTIO_CFG_WRITE()/VIRTIO_CFG_READ()
- VirtioScsiInit(): fix destination error label for when SetPageSize()
fails
- VirtioScsiInit(): call SetQueueNum() and SetQueueAlign() for proper MMIO
operation
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14966 6f19259b-4bc3-4df7-8a09-765794883524
This patch sets PcdPciDisableBusEnumeration to true then makes use of
PublishPeiMemory and XenMemMapInitialization to construct memory map for
Xen guest.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14946 6f19259b-4bc3-4df7-8a09-765794883524
This driver will support a flash FVB implementation if QEMU flash
is detected.
The driver is added to the apriori list to make sure it runs
before the EmuVariableFvbRuntimeDxe driver. If this driver detects
flash support, then it will disable the EmuVariableFvbRuntimeDxe
driver by setting PcdFlashNvStorageVariableBase64.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14840 6f19259b-4bc3-4df7-8a09-765794883524
This is to prepare for QEMU flash support which will allow
non-volatile variables to be saved in the flash image.
Note two size changes:
* NV Varstore size increased from 0xc000 to 0xe000
* FTW work size decreased from 0x2000 to 0x1000
The reason for this change is that the fault-tolerant write
support requires that the work area fit within the block
just before the fault-tolerant write spare storage blocks.
Since QEMU flash blocks have a size of 0x1000, this means
that the maximum FTW work size is 0x1000.
v2:
* Update commit message and PcdVariableStoreSize
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14835 6f19259b-4bc3-4df7-8a09-765794883524
(1) OVMF depends on
MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
unconditionally.
(2) When OVMF is built with -D SECURE_BOOT_ENABLE, then
SecurityPkg/Library/DxeImageVerificationLib/DxeImageVerificationLib.inf
is injected into SecurityStubDxe above.
(3) SVN r14687 ("Add TPM2 implementation.") has made
DxeImageVerificationLib dependent on TpmMeasurementLib.
Currently the last link of the
OVMF -> SecurityStubDxe -> DxeImageVerificationLib -> TpmMeasurementLib
dependency chain is unresolved:
build.py...
/.../OvmfPkg/OvmfPkgX64.dsc(...): error 4000: Instance of library class [TpmMeasurementLib] is not found
in [/.../SecurityPkg/Library/DxeImageVerificationLib/DxeImageVerificationLib.inf] [X64]
consumed by module [/.../MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf]
Let's provide a library instance for TpmMeasurementLib the same way as
"SecurityPkg/SecurityPkg.dsc" does (SVN r13964.)
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14690 6f19259b-4bc3-4df7-8a09-765794883524
2. ASSERT if PCD value is set to 5 (QUERY_USER_ON_SECURITY_VIOLATION).
3. Update override PCD setting from 5 to 4 in platform DSC file.
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ni Ruiyu <ruiyu.ni@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14607 6f19259b-4bc3-4df7-8a09-765794883524
Previously OVMF included the older EFI shell binary when building.
Now we will build and use the UEFI shell (ShellPkg) instead.
v2:
* Don't bother building UEFI shell when USE_OLD_SHELL is defined
* Fix errors in OvmfPkgIa32X64.fdf
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14600 6f19259b-4bc3-4df7-8a09-765794883524
r14252 causes OVMF to crash if SECURE_BOOT_ENABLE is set,
because PcdMaxVariableSize is set to a larger value than
required. In other platforms, 0x2000 seems to be sufficient.
Reported-by: Gary Ching-Pang Lin <glin@suse.com>
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14423 6f19259b-4bc3-4df7-8a09-765794883524
Also summarize the resultant NIC driver options in the README file.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14421 6f19259b-4bc3-4df7-8a09-765794883524
DHCP, PXE, and StdLib socket apps are enabled in OVMF by the sum of:
(a) a UEFI NIC driver,
(b) the generic network stack.
The only choice for (a) used to be the proprietary Intel E1000 driver,
which is cumbersome to obtain and enable.
The iPXE UEFI NIC drivers packaged with qemu-1.5 cover (a) for each NIC
type supported by qemu, and are easy to obtain & configure, even for
earlier qemu versions. Therefore enable (b) per default as well.
This doesn't take up much space; the binaries (b) adds to the firmware
don't seem to need -D FD_SIZE_2MB.
Intel's e1000 driver remains an option, requested by the -D E1000_ENABLE
build flag.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14366 6f19259b-4bc3-4df7-8a09-765794883524
This code is based on efilinux's bzimage support.
git://git.kernel.org/pub/scm/boot/efilinux/efilinux.git
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Matt Fleming <matt.fleming@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13922 6f19259b-4bc3-4df7-8a09-765794883524
Introduce a new library called VirtioLib, for now only collecting the
following reusable functions with as little changes as possible:
- VirtioWrite()
- VirtioRead()
- VirtioRingInit()
- VirtioRingUninit()
- AppendDesc()
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13842 6f19259b-4bc3-4df7-8a09-765794883524
This patch preserves this information when SOURCE_DEBUG_ENABLE is set.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Laszlo Ersek
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13780 6f19259b-4bc3-4df7-8a09-765794883524
In OvmfPkgIa32X64.dsc:
Paraphrasing svn rev 13350: gPcAtChipsetPkgTokenSpaceGuid is declared in
PcAtChipsetPkg.dec and used via AcpiPlatformDxe.inf, but with the latest
build tools, since this package builds multiple architectures (IA32 & X64)
and AcpiPlatformDxe is used on X64 only, it is now necessary to place the
gPcAtChipsetPkgTokenSpaceGuid PCD's in the [PcdsFixedAtBuild.X64] section.
In the two other .dsc files:
Make a similar change to keep file contents more easily comparable.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
[jordan.l.justen@intel.com: change all .dsc files to keep them diffable]
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13724 6f19259b-4bc3-4df7-8a09-765794883524
We don't force a platform reset for OVMF when PK is changed in
custom mode setup.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Lee Rosenbaum <lee.g.rosenbaum@intel.com>
Reviewed-by: Erik Bjorge <erik.c.bjorge@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13635 6f19259b-4bc3-4df7-8a09-765794883524
Represent the set of possible PCI link target IRQs with
Pcd8259LegacyModeEdgeLevel. This ensures that the 8259 Interrupt
Controller code in PcAtChipsetPkg will treat them as level-triggered too.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13628 6f19259b-4bc3-4df7-8a09-765794883524
ConSplitterDxe (UEFI_DRIVER) now uses this library class.
Move the library mapping to the common LibraryClasses section.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13570 6f19259b-4bc3-4df7-8a09-765794883524
UNIXGCC builds larger images than GCC44, and can have issues
fitting into the FD image. Therefore, when using UNIXGCC,
debug will be disabled by default.
The README file is updated with instructions for selectively
enabling debug for UNIXGCC.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13569 6f19259b-4bc3-4df7-8a09-765794883524
This patch adds support for a debug console on the same port that is used
by SeaBIOS. This makes it easier to debug OVMF, because it does not mix
debug and serial output on the same device. It also makes it easier to
leave some of the debug messages on even in release builds.
To enable it, pass "-debugcon stdio -global isa-debugcon.iobase=0x402" to
QEMU.
The new mechanism is enabled by default, but a regular serial console can
be chosen by adding -D DEBUG_ON_SERIAL_PORT to the build options.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
[jordan.l.justen@intel.com: MAX_DEBUG_MESSAGE_LENGTH=>0x100, p=>Ptr]
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13562 6f19259b-4bc3-4df7-8a09-765794883524
Gary Lin
Gabriel Somlo
Laszlo Ersek
Anthony PERARD
Jordan Justen
Paolo Bonzini
Olivier Martin
Wei Liu
Jeff Fan
Fu Siyuan
Eric Dong
Ruiyu Ni
jljusten
mdkinney