The unused global variable InvalidChars is removed.
It is only used in the function IsValidCommandName which
was removed previously.
https://bugzilla.tianocore.org/show_bug.cgi?id=1066
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
The redundant functions which are never called have been
removed. They are InternalShellProtocolDebugPrintMessage,
UpdateFileName,RemoveFileTag and IsValidCommandName.
https://bugzilla.tianocore.org/show_bug.cgi?id=1066
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1080
Per Shell spec 2.2 chapter 3.4.4.2, Unicode file tag should be
inserted in the output from the input redirected variable, to ensure
it looks like a UCS-2 encode file.
The patch fixes this issue.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
When "<a" is used to redirect ASCII file to an application, Shell
core reads the ASCII file and converts the ASCII to Unicode as the
input source of the application.
But per Shell spec, the input source should have \xFEFF to indicate
it's a Unicode stream.
The patch adds the missing \xFEFF.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=777
Per Shell spec, the environment variable has a case-sensitive name.
But today's implementation of EfiShellSetEnv() compares the
environment variable name case insensitively, which causes variable
like "CWD" cannot be set due to "cwd" is pre-defined variable.
The patch fixes this issue.
The EfiShellGetEnv() doesn't have such issue because it will
call into ShellFindEnvVarInList() which uses StrCmp().
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Jim Dailey <jim_dailey@dell.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
1. Do not use tab characters
2. No trailing white space in one line
3. All files must end with CRLF
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Within function UpdateDisplayFromHistory():
When getting a character with different attribute with the current one,
the statement to compare the character with a 'NULL' char should be:
*StringSegmentEnd != CHAR_NULL
rather than:
StringSegmentEnd != CHAR_NULL
This commit resolves this typo.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Shell core was enhanced to find the manual string in PE resource
section. But the finding algorithm is too strict: If the manual is
written beginning with:
.TH command 0 "descripton of command"
but user types "COMMAND.efi -?". The finding algorithm uses
case-sensitive compare between "command" and "COMMAND" resulting
in the manual cannot be found.
The patch fixes this issue by using existing ManFileFindTitleSection
and ManFileFindSections which compare command case-insensitive.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Current implementation resets the CTRL-C event early when printing
the shell prompt, when user types "<CTRL-C>ls<ENTER>", "ls" command
is terminated immediately when starts.
It's not an expected behavior from users' perspective.
Correct way is to reset the CTRL-C event just before running the
command, which is a bit later than current point.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=779
For the API EfiShellOpenRootByHandle():
The return status of the call to SimpleFileSystem->OpenVolume should be
checked.
It is possible that there is a media change in the device (like CD/DVD
ROM). In such case, the volume root opened and/or the device path opened
previously (also within EfiShellOpenRootByHandle) may be invalid.
This commit adds a check for the result of OpenVolume before subsequently
calling functions like EfiShellGetMapFromDevicePath() &
ConvertEfiFileProtocolToShellHandle().
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
V2:
Fix MSFT C4255 warning
V1:
Enable MSFT C4255 warning.
From MSDN:
Compiler Warning (level 4) C4255
function' : no function prototype given: converting '()' to '(void)'
The compiler did not find an explicit list of arguments to a function.
This warning is for the C compiler only.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bell Song <binx.song@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
AllocateCopyPool(AllocationSize, *Buffer) will copy "AllocationSize" bytes of
memory from old "Buffer" to new allocated one. If "AllocationSize" is bigger
than size of "Buffer", heap memory overflow occurs during copy.
One solution is to allocate pool first then copy the necessary bytes to new
memory. Another is using ReallocatePool instead if old buffer will be freed
on spot.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Bi Dandan <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=690
Within function EfiShellGetDevicePathFromFilePath(), when the input
parameter 'Path' string is like:
"FS0:"
It is possible for the below statement:
"if (*(Path+StrLen(MapName)+1) == CHAR_NULL) {"
to read the content 1 byte beyond the string boundary (both 'Path' and
'MapName' will be FS0: in this case).
This commit adds additional checks to avoid this.
Cc: Steven Shi <steven.shi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Some commands may cause current directory or even current mapping
become invalid. For example, "MAP" after unplugging the USB thumb
key may cause current mapping "FS0:" disappear.
This patch updates the CWD and current mapping when commands return.
It also causes the command prompt change to default "Shell>".
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Huajing Li <huajing.li@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by Jaben Carsey <jaben.carsey@intel.com>
PathSize is the number of bytes in PathForReturn buffer so
PathForReturn[PathSize - 1] incorrectly accesses the last
character in the buffer,
PathForReturn[PathSize / sizeof (CHAR16) - 1] should be used.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Steven Shi <steven.shi@intel.com>
alias in UEFI Shell is case insensitive.
Old code saves the alias to variable storage without
converting the alias to lower-case, which results
upper case alias setting doesn't work.
The patch converts the alias to lower case before saving
to variable storage.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Tapan Shah <tapandshah@hpe.com>
Commit bd3fc8133b ("ShellPkg/App: Fix memory leak and save resources.",
2016-05-20) added a FreePool() call for Split->SplitStdIn, near end of the
RunSplitCommand(), right after the same shell file was closed with
CloseFile(). The argument was:
> 1) RunSplitCommand() allocates the initial SplitStdOut via
> CreateFileInterfaceMem(). Free SplitStdIn after the swap to fix
> the memory leak.
There is no memory leak actually, and the FreePool() call in question
constitutes a double-free:
(a) This is how the handle is established:
ConvertEfiFileProtocolToShellHandle (
CreateFileInterfaceMem (Unicode),
NULL
);
CreateFileInterfaceMem() allocates an EFI_FILE_PROTOCOL_MEM object and
populates it fully. ConvertEfiFileProtocolToShellHandle() allocates
some administrative structures and links the EFI_FILE_PROTOCOL_MEM
object into "mFileHandleList".
(b) EFI_SHELL_PROTOCOL.CloseFile() is required to close the
SHELL_FILE_HANDLE and to release all associated data. Accordingly,
near the end of RunSplitCommand(), we have:
EfiShellClose()
ShellFileHandleRemove()
//
// undoes the effects of ConvertEfiFileProtocolToShellHandle()
//
ConvertShellHandleToEfiFileProtocol()
//
// note that this does not adjust the pointer value; it's a pure
// type cast
//
FileHandleClose()
FileInterfaceMemClose()
//
// tears down EFI_FILE_PROTOCOL_MEM completely, undoing the
// effects of CreateFileInterfaceMem ()
//
The FreePool() call added by bd3fc8133b conflicts with
SHELL_FREE_NON_NULL(This);
in FileInterfaceMemClose(), so remove it.
This error can be reproduced for example with:
> Shell> map | more
> 'more' is not recognized as an internal or external command, operable
> program, or script file.
which triggers:
> ASSERT MdeModulePkg/Core/Dxe/Mem/Pool.c(624): CR has Bad Signature
with the following stack dump:
> #0 0x000000007f6dc094 in CpuDeadLoop () at
> MdePkg/Library/BaseLib/CpuDeadLoop.c:37
> #1 0x000000007f6dd1b4 in DebugAssert (FileName=0x7f6ed9f0
> "MdeModulePkg/Core/Dxe/Mem/Pool.c", LineNumber=624,
> Description=0x7f6ed9d8 "CR has Bad Signature") at
> OvmfPkg/Library/PlatformDebugLibIoPort/DebugLib.c:153
> #2 0x000000007f6d075d in CoreFreePoolI (Buffer=0x7e232c98,
> PoolType=0x7f6bc1c4) at MdeModulePkg/Core/Dxe/Mem/Pool.c:624
> #3 0x000000007f6d060e in CoreInternalFreePool (Buffer=0x7e232c98,
> PoolType=0x7f6bc1c4) at MdeModulePkg/Core/Dxe/Mem/Pool.c:529
> #4 0x000000007f6d0648 in CoreFreePool (Buffer=0x7e232c98) at
> MdeModulePkg/Core/Dxe/Mem/Pool.c:552
> #5 0x000000007d49fbf8 in FreePool (Buffer=0x7e232c98) at
> MdePkg/Library/UefiMemoryAllocationLib/MemoryAllocationLib.c:818
> #6 0x000000007d4875c3 in RunSplitCommand (CmdLine=0x7d898398,
> StdIn=0x0, StdOut=0x0) at ShellPkg/Application/Shell/Shell.c:1813
> #7 0x000000007d487d59 in ProcessNewSplitCommandLine
> (CmdLine=0x7d898398) at ShellPkg/Application/Shell/Shell.c:2121
> #8 0x000000007d488937 in RunShellCommand (CmdLine=0x7e233018,
> CommandStatus=0x0) at ShellPkg/Application/Shell/Shell.c:2670
> #9 0x000000007d488b0b in RunCommand (CmdLine=0x7e233018) at
> ShellPkg/Application/Shell/Shell.c:2732
> #10 0x000000007d4867c8 in DoShellPrompt () at
> ShellPkg/Application/Shell/Shell.c:1349
> #11 0x000000007d48524d in UefiMain (ImageHandle=0x7e24c898,
> SystemTable=0x7f5b6018) at ShellPkg/Application/Shell/Shell.c:631
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Marvin Häuser <Marvin.Haeuser@outlook.com>
Cc: Qiu Shumin <shumin.qiu@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Fixes: bd3fc8133b
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Marvin Häuser <Marvin.Haeuser@outlook.com>
The "SPLIT_LIST.SplitStdOut" and "SPLIT_LIST.SplitStdIn" members currently
have type (SHELL_FILE_HANDLE *). This is wrong; SHELL_FILE_HANDLE is
already a pointer, there's no need to store a pointer to a pointer.
The error is obvious if we check where and how these members are used:
- In the RunSplitCommand() function, these members are used (populated)
extensively; this function has to be updated in sync.
ConvertEfiFileProtocolToShellHandle() already returns the temporary
memory file created with CreateFileInterfaceMem() as SHELL_FILE_HANDLE,
not as (SHELL_FILE_HANDLE *).
- In particular, the ConvertShellHandleToEfiFileProtocol() calls need to
be dropped as well in RunSplitCommand(), since
EFI_SHELL_PROTOCOL.SetFilePosition() and EFI_SHELL_PROTOCOL.CloseFile()
take SHELL_FILE_HANDLE parameters, not (EFI_FILE_PROTOCOL *).
Given that ConvertShellHandleToEfiFileProtocol() only performs a
type-cast (it does not adjust any pointer values), *and*
SHELL_FILE_HANDLE -- taken by EFI_SHELL_PROTOCOL member functions -- is
actually a typedef to (VOID *) -- see more on this later --, this
conversion error hasn't been caught by compilers.
- In the ProcessNewSplitCommandLine() function, RunSplitCommand() is
called either initially (passing in NULL / NULL; no update needed), or
recursively (passing in Split->SplitStdIn / Split->SplitStdOut; again no
update is necessary beyond the RunSplitCommand() modification above).
- In the UpdateStdInStdOutStdErr() and RestoreStdInStdOutStdErr()
functions, said structure members are compared and assigned to
"EFI_SHELL_PARAMETERS_PROTOCOL.StdIn" and
"EFI_SHELL_PARAMETERS_PROTOCOL.StdOut", both of which have type
SHELL_FILE_HANDLE, *not* (SHELL_FILE_HANDLE *).
The compiler hasn't caught this error because of the fatally flawed type
definition of SHELL_FILE_HANDLE, namely
typedef VOID *SHELL_FILE_HANDLE;
Pointer-to-void silently converts to and from most other pointer types;
among them, pointer-to-pointer-to-void. That is also why no update is
necessary for UpdateStdInStdOutStdErr() and RestoreStdInStdOutStdErr()
in this fix.
(
Generally speaking, using (VOID *) typedefs for opaque handles is a tragic
mistake in all of the UEFI-related specifications; this practice defeats
any type checking that compilers might help programmers with. The right
way to define an opaque handle is as follows:
//
// Introduce the incomplete structure type, and the derived pointer
// type, in both the specification and the public edk2 headers. Note
// that the derived pointer type itself is a complete type, and it can
// be used freely by client code.
//
typedef struct SHELL_FILE *SHELL_FILE_HANDLE;
//
// Complete the structure type in the edk2 internal C source files.
//
struct SHELL_FILE {
//
// list fields
//
};
This way the structure size and members remain hidden from client code,
but the C compiler can nonetheless catch any invalid conversions between
incompatible XXX_HANDLE types.
)
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Marvin Häuser <Marvin.Haeuser@outlook.com>
Cc: Qiu Shumin <shumin.qiu@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
When user doesn't press key to exit the timeout waiting in Shell,
and there is no startup.nsh, Shell exits with failure status.
aaf51f08ee introduced this bug.
The patch fixes this issue.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Chen A Chen <chen.a.chen@intel.com>
According to Shell spec 2.2 '-exit' invocation option is used to specify
that after running the command line when launched, the UEFI Shell must
immediately exit.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
In QuarkPlatformPkg/Library/PlatformBootManagerLib/PlatformBootManager.c,
there is a definition of mUefiShellFileGuid which is a constant reference
to the FILE_GUID as defined in ShellPkg/Application/Shell/Shell.inf.
To prevent the need for duplicating it to other modules, promote it to
a proper global GUID, and add it to the ShellPkg.dec package declaration.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
For pointer subtraction, the result is of type "ptrdiff_t". According to
the C11 standard (Committee Draft - April 12, 2011):
"When two pointers are subtracted, both shall point to elements of the
same array object, or one past the last element of the array object; the
result is the difference of the subscripts of the two array elements. The
size of the result is implementation-defined, and its type (a signed
integer type) is ptrdiff_t defined in the <stddef.h> header. If the result
is not representable in an object of that type, the behavior is
undefined."
In our codes, there are cases that the pointer subtraction is not
performed by pointers to elements of the same array object. This might
lead to potential issues, since the behavior is undefined according to C11
standard.
Also, since the size of type "ptrdiff_t" is implementation-defined. Some
static code checkers may warn that the pointer subtraction might underflow
first and then being cast to a bigger size. For example:
UINT8 *Ptr1, *Ptr2;
UINTN PtrDiff;
...
PtrDiff = (UINTN) (Ptr1 - Ptr2);
The commit will refine the pointer subtraction expressions by casting each
pointer to UINTN first and then perform the subtraction:
PtrDiff = (UINTN) Ptr1 - (UINTN) Ptr2;
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=332
When the ShellLib ShellExecute() API or the Shell
Protocol Execute() API are used to execute a
command, the arguments are parsed to produce the
Argc/Argv list in the Shell Parameters Protocol and
double quotes are removed from arguments that are
surrounded by double quotes. This is the required
behavior of the Shell Parameters Protocol.
The ProcessCommandLine() function in the shell
implementation uses the Argc/Argv list from the
Shell Parameters Protocol to assemble a new command
line, but the double quotes that may have been
originally present for an argument are not preserved.
ProcessCommandLine() is updated to check if an
argument added to the generated command line
contains one or more white space characters, and
if it does, double quotes are added around the
argument.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Ruiyu Ni <Ruiyu.ni@intel.com>
When ">v" is used to redirect the command output to environment
variable, the ending "\r\n\0" is removed before setting to environment
variable but the length is not updated.
It causes ">>v" fails to append data to the environment variable
created by ">v".
The patch fixes the above bug.
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
When ">v" is used to redirect the command output to environment
variable (e.g.: "echo xxx >v yyy"), we only called SetVariable()
to update the variable storage but forgot to update the cached
environment variables in gShellEnvVarList.
When updating the variable storage, the existing code unnecessary
saved the ending NULL character into variable storage.
The patch fixes all the above issues.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Tapan Shah <tapandshah@hpe.com>
The destination GUID comes first; from
"MdePkg/Include/Library/BaseMemoryLib.h":
> GUID *
> EFIAPI
> CopyGuid (
> OUT GUID *DestinationGuid,
> IN CONST GUID *SourceGuid
> );
Here "NewGuid" is the GUID looked up by GetGuidFromStringName(), and
"Guid" is where EfiShellGetGuidFromName() has to propagate that result to.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Tim Lewis <tim.lewis@insyde.com>
Reported-by: Tim Lewis <tim.lewis@insyde.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Tim Lewis <tim.lewis@insyde.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Update CRC32 in the EFI System Table header after shell changes the
value of gST->ConsoleOutHandle and gST->ConOut
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Cinnamon Shia <cinnamon.shia@hpe.com>
Reviewed-By: Tapan Shah <tapandshah@hpe.com>
Reviewed-By: Jaben Carsey <Jaben.carsey@intel.com>
As per ECR 1349 change in UEFI Shell Specification 2.2, expanding
a special output file name to include "NULL". Previously it only
supported "NUL" as a special output file and it was case sensitive.
With this change both "NUL" and "NULL" are special output file and
checked as case insensitive.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
According to the latest shell spec, in function FindFiles(),
when no files were found, it should return EFI_NOT_FOUND.
But current codes don't follow the spec.
This patch is to fix this issue.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
This reverts commit c0bcd3433f.
The above commit causes several regression of "echo" command:
1. Double quotes are not being stripped from the final text. UEFI Shell 2.2 section 3.4.5 chops out the quotes.
2. Output redirection is not working as expected. Text is being redirected, but the ‘> …’ text should not be.
3. Inconsistent special character handling. For example, comments with # seem to be parsed out correctly, but handing of ^ is incorrect.
In summary, ‘echo “You are ^#1” > t.txt’ results in the below content in t.txt:
“You are ^#1” > t.txt
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Tapan Shah <tapandshah@hpe.com>
When the FilePattern is similar to "fsx:EFI\BOOT", FindFiles()
cannot handle it correctly because it always assumes there is
"\\" after "fsx:".
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Tapan Shah <tapandshah@hpe.com>
It should shows files in root directory of current map.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Tapan Shah <tapandshah@hpe.com>
Commit 9168df3dea
"ShellPkg/ShellProtocol.c: Handle memory allocation failure"
only keeps the protocol clean up in CleanUpShellProtocol() and
creates a new function CleanUpShellEnvironment() which calls
CleanUpShellProtocol(), then unregisters the hotkey callback.
But the commit forgot to change the Shell.c to call
CleanUpShellEnvironment() which causes the hotkey callback is
not unregistered while the callback function doesn't exist
when Shell exits.
This causes system hang when pressing CTRL+C after exiting shell.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
And add Shell prefix to the two library APIs.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
1) RunSplitCommand() allocates the initial SplitStdOut via
CreateFileInterfaceMem(). Free SplitStdIn after the swap to fix
the memory leak.
2) In RunSplitCommand(), SplitStdOut is checked for equality with
StdIn. This cannot happen due to the if-check within the swap.
Hence remove it.
3) UefiMain() doesn't free SplitList. Delete all list entries and
reinitialize the list when in DEBUG. This does not include the
CreateFileInterfaceMem()-allocated SplitStd mentioned in 1), so
keep the ASSERT() until resolved.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
The EFI_UNICODE_COLLATION_PROTOCOL can have two different GUIDs.
Look for both to support more UEFI implementations.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
shenglei
Ruiyu Ni
chenc2
Liming Gao
Hao Wu
Song, BinX
Jian J Wang
Huajing Li
Laszlo Ersek
Dandan Bi
Ard Biesheuvel
Michael Kinney
Cinnamon Shia
Tapan Shah
Marvin H?user