PcdSet## has no error status returned, then the caller has no idea about whether the set operation is successful or not.
PcdSet##S were added to return error status and PcdSet## APIs were put in ifndef DISABLE_NEW_DEPRECATED_INTERFACES condition.
To adopt PcdSet##S and further code development with DISABLE_NEW_DEPRECATED_INTERFACES defined, we need to Replace PcdSet## usage with PcdSet##S.
Normally, DynamicDefault PCD set is expected to be success, but DynamicHii PCD set failure is a legal case.
For this case, PcdS3BootScriptTablePrivateDataPtr and PcdS3BootScriptTablePrivateSmmDataPtr are expected to be DynamicDefault,
so use PcdSet64S to instead of PcdSet64 and assert when set failure.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18599 6f19259b-4bc3-4df7-8a09-765794883524
Current implementation assumes the performance entry count has no change from
multiple GetPerformanceMeasurement() while loops, it may cause the allocated buffer
for PerfEntriesAsDxeHandle at the first loop to be overflowed if the following loop has
the count changed.
This patch is also to sync the change at
commit R17851 "IntelFrameworkModulePkg GenericBdsLib: Resolve array size mismatch".
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18561 6f19259b-4bc3-4df7-8a09-765794883524
NetLibGetSystemGuid gets the UUID from SMBIOS table to use as the System GUID
(in DHCP and other network use cases). This change adds support to get the
UUID from either SMBIOS 2.x or 3.0, since SMBIOS 3.0 uses a different GUID in
the System Configuration Table.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <samer.el-haj-mahmoud@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18559 6f19259b-4bc3-4df7-8a09-765794883524
The pointer to the destination string changed,the max length also changed.Previous change neglect this point.
And base on the code logic,we can use StrCatS to replace StrCpyS.Now this patch is to fix this bug.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18497 6f19259b-4bc3-4df7-8a09-765794883524
What to do:
1. Remove a hidden assumption "No SMM driver writes BootScript between
SmmReadyToLock and S3SleepEntryCallback".
1.1. Use SmmExitBootServices and SmmLegacyBoot notification to record
AtRuntime flag.
1.2. Use mBootScriptDataBootTimeGuid LockBox to save boot time boot
script data to handle potential INSERT boot script at runtime in SMM.
2. Do not depend on OS to help restore ACPINvs data and use
EfiReservedMemoryType instead of EfiACPIMemoryNVS.
2.1. Use mBootScriptSmmPrivateDataGuid LockBox to save boot script
SMM private data with BackFromS3 = TRUE at runtime. S3 resume
will help restore it to tell the Library the system is back
from S3.
Why to do:
1. The hidden assumption "No SMM driver writes BootScript between
SmmReadyToLock and S3SleepEntryCallback" will cause confusion to
the library's consumer and block the usage of "SMM driver writes
BootScript after SmmReadyToLock". So Remove the assumption.
2. In original code, there might be a corner case that malicious
code patch ACPINvs boot TableLength field same as SMM boot script.
So that it can skip the table restore. The impact is that BootScript
in SMM may be overridden by malicious code.
--------------------
CopyMem ((VOID*)&TableHeader, (VOID*)mS3BootScriptTablePtr->TableBase, sizeof(EFI_BOOT_SCRIPT_TABLE_HEADER));
if (mS3BootScriptTablePtr->TableLength + sizeof(EFI_BOOT_SCRIPT_TERMINATE) != TableHeader.TableLength) { // TableLength is in NVS
......
//
// NOTE: We should NOT use TableHeader.TableLength, because it is already updated to be whole length.
//
mS3BootScriptTablePtr->TableLength = (UINT32)(mLockBoxLength - sizeof(EFI_BOOT_SCRIPT_TERMINATE)); ? This line can be skipped.
--------------------
So use EfiReservedMemoryType instead of EfiACPIMemoryNVS as the code
has been updated to not depend on OS to help restore ACPINvs data.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18467 6f19259b-4bc3-4df7-8a09-765794883524
The mBmPerfHeader.Count isn't reset to 0 in BmWriteBootToOsPerformanceData()
so when the actual performance data entry count exceeds the LimitCount,
the performance data collection breaks on condition
if (mBmPerfHeader.Count == LimitCount), but 2nd time calling this function
will not break on condition if (mBmPerfHeader.Count == LimitCount) because
the mBmPerfHeader.Count always bigger than LimitCount, which results buffer
overrun.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18417 6f19259b-4bc3-4df7-8a09-765794883524
Convert the UNIX to DOS end of line format.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18324 6f19259b-4bc3-4df7-8a09-765794883524
The check will be based on PcdVarCheck binary that generated
by BaseTools.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18294 6f19259b-4bc3-4df7-8a09-765794883524
The check will be based on VarCheckHiiBin that generated
from FV and Hii Database.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18293 6f19259b-4bc3-4df7-8a09-765794883524
What to do: Implement VarCheckUefiLib NULL class library instance.
The code logic are separated from Variable driver, and it will consume VarCheckLib
to register var check handler and variable property set for UEFI defined variables.
Why to do: Share code.
Separate variable check UEFI code from Variable driver in MdeModulePkg.
We are going to separate generic software logic code from Variable Driver
to benefit other variable driver implementation. Auth services has been done
to be AuthVariableLib, now to cover variable check service.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18279 6f19259b-4bc3-4df7-8a09-765794883524
What to do:
1. Add VarCheckLib LibraryClass definitions.
2. Implement VarCheckLib library instance.
The code logic are separated from Variable driver.
Why to do: Share code.
Separate variable check service from Variable driver in MdeModulePkg.
We are going to separate generic software logic code from Variable Driver
to benefit other variable driver implementation. Auth services has been done
to be AuthVariableLib, now to cover variable check service.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18278 6f19259b-4bc3-4df7-8a09-765794883524
In HttpLib, the Event BodyParseComplete should return to the
callback function when the whole message body has been parsed
including the trailer if it has.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18213 6f19259b-4bc3-4df7-8a09-765794883524
NetRandomInitSeed() function use current time to initialize the random seed,
while in some platform the time service is not accuracy that make the random
seed collision. This patch add the monotonic count to the seed to avoid this.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18185 6f19259b-4bc3-4df7-8a09-765794883524
When there are multiple network boot options, user will see multiple
"UEFI Network" boot options. It's hard to distinguish them using the
description.
The patch enhances the boot option generation logic to append " 2"
/" 3"/" 4"/... number suffix to the non-first network boot options.
So the 2nd one becomes "UEFI Network 2".
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18062 6f19259b-4bc3-4df7-8a09-765794883524
that assumes the SMRAM reserved range is only at the end of the SMRAM descriptor.
//
// This range has reserved area, calculate the left free size
//
gSmmCorePrivate->SmramRanges[Index].PhysicalSize = SmramResRegion->SmramReservedStart - gSmmCorePrivate->SmramRanges[Index].CpuStart;
Imagine the following scenario where we just reserve the first page of the SMRAM range:
SMRAM Descriptor:
Start: 0x80000000
Size: 0x02000000
Reserved Range:
Start: 0x80000000
Size: 0x00001000
In this case the adjustment to the SMRAM range size yields zero: ReservedStart - SMRAM Start is 0x80000000 - 0x80000000 = 0.
So even though most of the range is still free the IPL code decides its unusable.
The problem comes from the email thread: [edk2] PiSmmIpl SMRAM Reservation Logic.
http://thread.gmane.org/gmane.comp.bios.tianocore.devel/15268
Also to follow the idea in the email thread, the patch is to
1. Keep only one copy of full SMRAM ranges in gSmmCorePrivate->SmramRanges,
split record for SmmConfiguration->SmramReservedRegions and SMM Core that
will be marked to be EFI_ALLOCATED in gSmmCorePrivate->SmramRanges.
2. Handle SmmConfiguration->SmramReservedRegions at beginning of, at end of,
in the middle of, or cross multiple SmramRanges.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18031 6f19259b-4bc3-4df7-8a09-765794883524
Change the type of mStatusString[] to reflect that it is a CONST
array of pointers to CONST.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18022 6f19259b-4bc3-4df7-8a09-765794883524
Remove two protocols never used in DxeNetLib.inf and add HttpLib access in MdeModulePkg.dec.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: fanwang2 <fan.wang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17983 6f19259b-4bc3-4df7-8a09-765794883524
In certain rare circumstance, the data passed from outside of SMM may be
invalid resulting the integer overflow. The issue are found by code review.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17908 6f19259b-4bc3-4df7-8a09-765794883524
Safe string functions may ASSERT when the source length is larger than the MaxDest. This patch use Strn**S to indicate the copy length.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17867 6f19259b-4bc3-4df7-8a09-765794883524
This patch add the header file and DXE implementation for the HttpLib.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17856 6f19259b-4bc3-4df7-8a09-765794883524
UEFI Spec HTTP Boot Device Path, after retrieving the boot resource
information, the BootURI device path node will be updated to include
the BootURI information. It means the device path on the child handle
will be updated after the LoadFile() service is called.
To handle this case, UefiBootManagerLib BmGetLoadOptionBuffer API
is updated as the below:
1) Get Device handle based on Device Path
2) Call LoadFile() service (GetFileBufferByFilePath() API) to get Load File Buffer.
3) Retrieve DevicePath from Device handle
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17798 6f19259b-4bc3-4df7-8a09-765794883524
UEFI Spec HTTP Boot Device Path, after retrieving the boot resource
information, the BootURI device path node will be updated to include
the BootURI information. It means the device path on the child handle
will be updated after the LoadFile() service is called.
To handle this case, SecurityManagementLib ExecuteSecurityHandlers API
is updated as the below:
1) Get Device handle based on Device Path
2) Call LoadFile() service (GetFileBufferByFilePath() API) to get Load File Buffer.
3) Retrieve DevicePath from Device handle
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17797 6f19259b-4bc3-4df7-8a09-765794883524
What to do:
1. Add AuthVariableLib LibraryClass definitions.
2. Implement a NULL AuthVariableLib library instance.
3. Add VARIABLE_ENTRY_PROPERTY definition to VarCheck.h.
4. Add VARIABLE_ENTRY_CONSISTENCY and variable attribute
combinations definitions to VariableFormat.h.
Why to do:
1. Share code.
1.1. Separate auth variable service from Auth Variable driver in
SecurityPkg to AuthVariableLib. Then the AuthVariableLib could benefit
and be used by different implementation of Auth Variable drivers.
1.2 The VARIABLE_ENTRY_PROPERTY definition to VarCheck.h,
VARIABLE_ENTRY_CONSISTENCY and variable attribute
combinations definitions to VariableFormat.h will be shared
by merged Variable driver and AuthVariableLib.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17757 6f19259b-4bc3-4df7-8a09-765794883524
What to do:
1. Move TpmMeasurementLib LibraryClass from SecurityPkg to MdeModulePkg.
2. Implement a NULL TpmMeasurementLib library instance.
Why to do:
1. Share code.
We are moving forward to separate auth variable service from Auth Variable
driver in SecurityPkg to AuthVariableLib. Then the AuthVariableLib could benefit
and be used by different implementation of Auth Variable drivers.
2. Remove code duplication and reduce maintenance effort.
After auth variable service separated from Auth Variable driver in SecurityPkg
to AuthVariableLib. The remaining code logic of Auth Variable driver in SecurityPkg
will be almost same with Variable driver in MdeModulePkg. We are going to
merge them.
3. TpmMeasurementLib is consumed by Auth Variable driver in SecurityPkg now,
as Auth Variable driver in SecurityPkg will be merged to Variable driver in
MdeModulePkg, so the library class also needs to be moved to MdeModulePkg.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17753 6f19259b-4bc3-4df7-8a09-765794883524
Per PI spec all allocation of SMRAM should use EfiRuntimeServicesCode or EfiRuntimeServicesData.
So SMM instance use EfiRuntimeServicesCode as the default memory allocation type instead of EfiBootServicesData.
This patch clarify this usage in comments.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17667 6f19259b-4bc3-4df7-8a09-765794883524
Display engine base on class opcode to detect whether in
front page.Now remove class/subclass and use FormsetGuid
or ClassGuid to judge whether in front page
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17590 6f19259b-4bc3-4df7-8a09-765794883524
1. Continue to get performance data by Performance Protocol
when no SMM performance data found.
2. Not try to get SMM performance data again
if no SMM performance handler found.
3. Correct typo 'totol' and 'guage'.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17561 6f19259b-4bc3-4df7-8a09-765794883524
For boot performance dump, as current behavior.
It depends on which PerformanceLib instance the DP application linked to.
For example, if DxePerfrmanceLib(MdeModulePkg\Library\DxePerformanceLib)
got linked, it will try to dump PEI and DXE performance data; and if
DxeSmmPerfrmanceLib(MdeModulePkg\Library\DxeSmmPerformanceLib)
got linked, then SMM performance data are expected.
It has burden and confusion to developers about the DP application need to be linked to
different PerformanceLib instance in *.dsc and rebuilt for the performance data dump.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17548 6f19259b-4bc3-4df7-8a09-765794883524
This API can be used for platform to customize the boot description other than using core provided boot description.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17547 6f19259b-4bc3-4df7-8a09-765794883524
Star Zeng
Samer El-Haj-Mahmoud
Dandan Bi
Ruiyu Ni
Sunny Wang
Liming Gao
Eric Dong
Jiaxin Wu
Zhang Lubo
Fu Siyuan
Ard Biesheuvel
fanwang2
Qiu Shumin