REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4135
Added spec version check while publishing new Type9 fields,
added Slot Pitch field which was missing and
corrected the publishing order as per Smbios spec.
Cc: Vasudevan S <vasudevans@ami.com>
Cc: Sundaresan S <sundaresans@ami.com>
Signed-off-by: Sainadh Nagolu <sainadhn@ami.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
RFC: https://bugzilla.tianocore.org/show_bug.cgi?id=3937
ShellCommandRunMemMap() is updated to handle the case of unaccepted
memory type.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
The ACPI specification updated some terms in accordance with:
s1.1.1 Principle of Inclusive Terminology
Update the PCCT parser accordincly with these new terms.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Parse Type 0 or Local APIC structure.
Also parse the Local APIC Flags as bitfields.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Abdul Lateef Attar <abdattar@amd.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
This reverts commit d5fd86f256 for tag202208.
This feature will be merged after stable tag 202208 is created.
Signed-off-by: Liming Gao <gaoliming@byosoft.com.cn>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Bugzilla: 3995 (https://bugzilla.tianocore.org/show_bug.cgi?id=3995)
ACPI 6.4 spec states that if the revision field in the DSDT header is less
than 2, then all integers are restricted in width to 32 bits, including in
SSDTs.
Arm Base boot requirements state that platforms must conform to ACPI 6.3
or later, and that legacy tables are not supported.
Adds a check for this field and raise warning if revision is less
than 2 on arm.
Signed-off-by: Edward Pickup <edward.pickup@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Parse Type 0 or Local APIC structure.
Also parse the Local APIC Flags as bitfields.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Abdul Lateef Attar <abdattar@amd.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Since PeerGroups has a variable number of entries, new fields added
after PeerGroups are defined in a extended structure.
Done changes in PrintInfo.c to access those fields using
SMBIOS_TABLE_TYPE9_EXTENDED structure from SmBios.h.
Signed-off-by: Sainadh Nagolu <sainadhn@ami.com>
Cc: Vasudevan Sambandan <vasudevans@ami.com>
Cc: Sundaresan S <sundaresans@ami.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=4014
If Configured Memory Speed is 65,535 MT/s or greater,
and the actual speed is stored in the Extended Configured Memory Speed
field. but current Smbiosview have no this logic.
Signed-off-by: Shengfengx Xue <shengfengx.xue@intel.com>
Bugzilla: 3458 - Add support IORT Rev E.d specification updates
(https://bugzilla.tianocore.org/show_bug.cgi?id=3458)
The IO Remapping Table, Platform Design Document, Revision E.d,
Feb 2022 (https://developer.arm.com/documentation/den0049/)
introduces the following updates, collectively including the
updates and errata fixes to Rev E, Rev E.a, Rev E.b, Rev E.c:
- increments the IORT table revision to 5.
- updates the node definition to add an 'Identifier' field.
- adds definition of node type 6 - Reserved Memory Range node.
- adds definition for Memory Range Descriptors.
- adds flag to indicate PRI support for root complexes.
- adds flag to indicate if the root complex supports forwarding
of PASID information on translated transactions to the SMMU.
- adds flag to indicate if the root complex supports PASID.
- adds flags to define access privilege and attributes for the
memory ranges.
Therefore, update the IORT parser to:
- parse the Identifier field.
- parse Reserved Memory Range node.
- parse Memory Range Descriptors.
- add validations to check that the physical range base
and size of the Memory Range Descriptor is 64KB aligned.
- add validation to check that the IORT Table Revision is
not 4 as IORT Rev E.c is deprecated.
- add validation to check that the IORT RMR node revision
is not 2 as it breaks backward compatibility and was
deprecated as part of IORT Rev E.c.
- skip parsing of IORT Rev E, Rev E.a, Rev E.b, Rev E.c as
some fields were deprecated in these revisions.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Some field names in the IORT table parser were longer than the
OUTPUT_FIELD_COLUMN_WIDTH plus indentation, resulting in loss of
the output print alignment. Therefore, abbreviate the field names.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3906
update smbiosview type 0 related fileds.
Signed-off-by: Bo Chang Ke <bo-changx.ke@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3896
update smbiosview type 9 related fileds.
Signed-off-by: Bo Chang Ke <bo-changx.ke@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3900
update smbiosview type 41 related fileds.
Signed-off-by: Bo Chang Ke <bo-changx.ke@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3839
Adds PrintFormatter function to the FADT flags field.
Prints indivisual flag name along with flag value.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Abdul Lateef Attar <abdattar@amd.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3839
Adds ParseAcpiBitFields() which is based on
ParseAcpi() and capable of parsing the bit fields.
Supports parsing of UINT8, UINT16, UINT32 and UINT64 byte data.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Abdul Lateef Attar <abdattar@amd.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3819
Ping GetTimerPeriod API returns sometime zero value when
StallCounter has smaller value than RttTimerTick (divide by zero)
which results some failure at ping UEFI shell command
Signed-off-by: MohammedX Rehan <mohammedx.rehan@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Bugzilla: 3770 (https://bugzilla.tianocore.org/show_bug.cgi?id=3770)
The PPTT parser in AcpiView incorrectly dereferences a pointer to
FlagName when trying to log an error with the PPTT cache flags, which
can lead to random crashes and other errors.
Also fix some spacing in the error message to ensure the message is
printed cleanly.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Reviewed-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Bugzilla: 3697 (https://bugzilla.tianocore.org/show_bug.cgi?id=3697)
Update the Acpiview PPTT parser with the Cache ID field and relevant
validations as defined in tables 5.140 and 5.141 of the ACPI 6.4
specification.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Bugzilla: 3697 (https://bugzilla.tianocore.org/show_bug.cgi?id=3697)
Update the Acpiview PPTT parser to use Acpi64.h. As part of the changes,
remove support for parsing PPTT type 2 ID structure.
Mantis ID for removing PPTT type 2 structure:
2072 (https://mantis.uefi.org/mantis/view.php?id=2072)
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3737
Apply uncrustify changes to .c/.h files in the ShellPkg package
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3760
Update all use of ', OPTIONAL' to ' OPTIONAL,' for function params.
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Add a comment to clarify that in Acpiview the ItemPtr is not set until
after the FieldValidator has been called.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
The patch adds entry into QueryTable.c for ProcessorUpgradeSocketLGA4677
from SMBIOS 3.5.0.
It also adds entries into QueryTable.c for ProcessorUpgradeSocketLGA4189
and ProcessorUpgradeSocketLGA1200 from SMBIOS 3.4.0.
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Add parser support for the new "MinTransferSize" field of the System
Locality, Latency and Bandwidth structure, introduced by the ACPI
specification version 6.4.
Also update the HMAT parser to use the newer ACPI version 6.4
definitions.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Reviewed-by: Zhichao Gao <zhcihao.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Bugzilla: 3563 (https://bugzilla.tianocore.org/show_bug.cgi?id=3563)
Update the Acpiview PCCT parser with the HW Registers based
Communications Subspace Structure (Type 5) as defined in Section 14.1.7
of the ACPI 6.4 specification.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar <sami.mujawar@arm.com>
Bugzilla: 3563 (https://bugzilla.tianocore.org/show_bug.cgi?id=3563)
Update the Acpiview PCCT parser to use Acpi64.h.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar <sami.mujawar@arm.com>
Bugzilla: 3565 (https://bugzilla.tianocore.org/show_bug.cgi?id=3565)
Update the Acpiview GTDT parser to use Acpi64.h and as such rename all
occurences of "SBSA Generic Watchdog" to "Arm Generic Watchdog".
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The following changes were addressed,
1. Smbios specs 3.4.0 table-51 bit5&6, these fields moved
from specific MemoryArrayLocationCXLFlexbus10AddonCard
to generic MemoryArrayLocationCXLAddonCard
to address both CXL1.0 and 2.0 CXL revisions.
2. Smbios specs 3.4.0 table-79, The memory technology name changed
from MemoryTechnologyIntelPersistentMemory
to MemoryTechnologyIntelOptanePersistentMemory.
Signed-off-by: Thotala Gopi <gopi.thotala@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Fix typo of 'specified' in UefiShellDriver1CommandsLib.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
`Dupes` is used only if `Duplicates != NULL` and function is left if
allocation of memory for `Dupes` fails, so it can't be used
uninitialized.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3228
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Sergei Dmitrouk <sergei@posteo.net>
Message-Id: <20210511225616.5942-2-sergei@posteo.net>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The SystemEnclosureTypeTable in QueryTable.c contained a couple
of errors: value 0x10 is "Lunch Box" not "Main Server Chassis", and
the Sub Notebook value was repeated as 0x13 when that entry is for
"SubChassis". The entries in-between needed adjusted.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Bugzilla: 3262 (https://bugzilla.tianocore.org/show_bug.cgi?id=3262)
No need to print PCIe details while CapabilityId is 0xFFFF.
Limit the NextCapabilityOffset to PCI configuration space.
Signed-off-by: VincentX Ke <vincentx.ke@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3177
Add ContainedElementCount, ContainedElementRecordLength and
ContainedElements for smbiosview type 3.
Signed-off-by: Mars CC Lin <mars_cc_lin@phoenix.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Philippe Mathieu-Daude <philmd@redhat.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Bugzilla: 3045 (https://bugzilla.tianocore.org/show_bug.cgi?id=3045)
Add a new parser for the Heterogeneous Memory Attribute Table. The
parser also validates some fields for this table.
The HMAT table is used to describe the memory attributes such as memory
side cache attributes and bandwidth and latency details related to
memory proximity domains. The info in the HMAT table can be used by an
operating system for optimisation.
Signed-off-by: Marc Moisson-Franckhauser <marc.moisson-franckhauser@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Tested-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Introduce the ShellSortFileList() function, for sorting an
EFI_SHELL_FILE_INFO list, by FileName or by FullName.
Duplicates can be kept in the same list, or separated out to a new list.
In either case, the relative order between duplicates does not change (the
sorting is stable).
For the sorting, use OrderedCollectionLib rather than SortLib:
- The PerformQuickSort() function from the latter has quadratic worst-case
time complexity, plus it is implemented recursively (see
"MdeModulePkg/Library/UefiSortLib/UefiSortLib.c"). It can also not
return an error on memory allocation failure.
- In comparison, the Red-Black Tree instance of OrderedCollectionLib sorts
in O(n*log(n)) worst-case time, contains no recursion with the default
PcdValidateOrderedCollection=FALSE setting, and the OrderedCollectionLib
class APIs return errors appropriately.
The OrderedCollectionLib APIs do not permit duplicates natively, but by
using lists as collection entries, stable sorting of duplicates can be
achieved.
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3151
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Message-Id: <20210113085453.10168-7-lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The COMP shell command compares two files byte for byte. In order to
retrieve the bytes to compare, it currently invokes
gEfiShellProtocol->ReadFile() on both files, using a single-byte buffer
every time. This is very inefficient; the underlying
EFI_FILE_PROTOCOL.Read() function may be costly.
Read both file operands in chunks of "PcdShellFileOperationSize" bytes.
Draw bytes for comparison from the internal read-ahead buffers.
Some ad-hoc measurements on my laptop, using OVMF, and the 4KB default of
"PcdShellFileOperationSize":
- When comparing two identical 1MB files that are served by EnhancedFatDxe
on top of VirtioScsiDxe, this patch brings no noticeable improvement;
the comparison completes in <1s both before and after.
- When comparing two identical 1MB files served by VirtioFsDxe, the
comparison time improves from 2 minutes 25 seconds to <1s.
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3123
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Message-Id: <20210113085453.10168-2-lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Neither of the "CPU Socket Unpopulated" or "Do not reboot" messages
should contain the word "Bits".
Remove them and update the identifier for the "Do not reboot" message
to remove the word "BITS".
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Bugzilla: 3048 (https://bugzilla.tianocore.org/show_bug.cgi?id=3048)
Add a new parser for the Arm Error Source Table (AEST) described in
the ACPI for the Armv8 RAS Extensions 1.1 Platform Design Document,
dated 28 September 2020.
(https://developer.arm.com/documentation/den0085/0101/)
AEST enables kernel-first handling of errors in a system that supports
the Armv8 RAS extensions. It covers Armv8.2+ RAS extensions for PEs
and the RAS system architecture for non-PE system components.
Signed-off-by: Marc Moisson-Franckhauser <marc.moisson-franckhauser@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3138
Define structures for Resizable BAR Capability in
MdePkg/Include/IndustryStandard/PciExpress21.h,
Change ShellPkg/Library/UefiShellDebug1CommandsLib/Pci.c
to use new structures.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Signed-off-by: Heng Luo <heng.luo@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Bugzilla: 3047 (https://bugzilla.tianocore.org/show_bug.cgi?id=3047)
Create a new parser for the PCCT Table.
The PCCT Table is used to describe how the OSPM can
communicate with entities outside the platform. It
describes which memory spaces correspond to which
entity as well as a few of the needed information
to handle the communications.
This new PCCT parser dumps the values and names of
the table fields. It also performs some validation
on the table's fields.
Signed-off-by: Marc Moisson-Franckhauser <marc.moisson-franckhauser@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Bugzilla: 3046 (https://bugzilla.tianocore.org/show_bug.cgi?id=3046)
The field validator function provides means to validate fields
in the ACPI table structures. To print complex field types a
print formatter function is provided.
The field validator was being invoked for simple data fields
for which the default print format is used. However, the field
validator function was not invoked if a print formatter function
was provided.
This problem is noticed when a Generic Address Structure (GAS)
is printed using DumpGas() and a field validator is present
to validate the GAS structure.
To fix this move the invocation of the field validator after
the field is printed such that the validation function is
called even when a print formatter function is present.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
"FirmwareVersion" was misspelled "FirwareVersion".
Also, update SmbiosView PrintInfo.c to use the new field name.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
In SmBios.h, the SMBIOS_TABLE_TYPE4 field "ProcessorManufacture"
should be "ProcessorManufacturer".
Also, update SmbiosView PrintInfo.c to use the new field name.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2998
In the function FileBufferCutLine(),set the CutLine pointer to NULL,
The function header specifies that the pointer is valid on a successful
or failed return code.
Signed-off-by: Enze Zhu <zhuenze@byosoft.com.cn>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>