EFI_PXE_BASE_CODE_PROTOCOL has interface to set the TTL and ToS value, but
not used by the UdpWrite() interface. The code always use a hard coded 16
for the TTL and 0 for ToS.
This patch update the UpdWrite() to use the TTL and ToS which have been set
by the SetParameters().
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-By: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-By: Samer El-Haj-Mahmoud <elhaj@hpe.com>
The DHCP4 can have only one configured child instance so we need to reset
the DHCP4 child when leaving PXE driver's LoadFile() function, otherwise the
other programs which also need to use DHCP4 (like HTTP boot) will be impacted.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18616 6f19259b-4bc3-4df7-8a09-765794883524
PXE driver's LoadFile protocol should check the input parameter
FilePath to see whether it's a supported device path.If not,
it should return invalid parameter, do not continue PXE boot.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18436 6f19259b-4bc3-4df7-8a09-765794883524
DHCP4 service allows only one of its children to be configured
in the active state,If the DHCP4 D.O.R.A started by IP4 auto
configuration and has not been completed, the Dhcp4 state machine
will not be in the right state for the PXE to start a new round D.O.R.A.
so we need to switch it's policy to static.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18104 6f19259b-4bc3-4df7-8a09-765794883524
1. Update the parameter check of PXE.UdpRead() to align with spec definition.
2. Update PXE driver to use EFI_PXE_BASE_CODE_UDP_OPFLAGS_ANY_DEST_IP when calling UdpRead to receive server discovery message.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17075 6f19259b-4bc3-4df7-8a09-765794883524
A failed PXEv6 after a success PXEv4 will cause ASSERT.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17070 6f19259b-4bc3-4df7-8a09-765794883524
2. Update IP6 driver to use previous configured prefix length if a pre-exist IP6 address with unspecified prefix length.
3. Add NULL check for Dhcp protocol pointer before it decline the address in Ip6ConfigSetStatefulAddrCallback() function.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu, Siyuan <siyuan.fu@intel.com>
Reviewed-By: Ye, Ting (ting.ye@intel.com)
Reviewed-By: Wu, Jiaxin <jiaxin.wu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16131 6f19259b-4bc3-4df7-8a09-765794883524
2. Retrieve the IP information after iSCSI TCPv6 connection established and fill it into iBFT table.
3. Generate a random IAID for each NIC port to require different IPv6 address in PXE driver.
4. Update function EfiMtftp6Configure() and Mtftp6RrqHandleOack() to allocate at most one UdpIo.
5. Fix a typo from “destory” to “destroy” in network code.
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Ouyang Qian <qian.ouyang@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13859 6f19259b-4bc3-4df7-8a09-765794883524
1.1 Proxy DHCP6 service and DHCP6 service on different servers.
1.2 Proxy DHCP6 server with Response Delay setting.
2. Update to support percent-encoding in NBP file name in netboot6 BootFileURL.
Signed-off-by: hhuan13
Reviewed-by: xdu2, tye
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12122 6f19259b-4bc3-4df7-8a09-765794883524
Fu Siyuan
Zhang Lubo
Eric Dong
Mauro Faccenda
Samer El-Haj-Mahmoud elhaj
sfu5
hhuan13
hhtian