Support local bind by validating the IP address using the IP configuration protocol.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Ankit Singh3 <Ankit_Singh3@Dell.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14875 6f19259b-4bc3-4df7-8a09-765794883524
- Automatically use non-interactive mode during script execution.
- Automatically use non-interactive mode when a specific value is read (omitting this behavior was a violation of the UEFI Shell Spec)
- Only output the value read in when reading a value in a script; this allows automated use of the MM command.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Chris Phillips <chrisp@hp.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14874 6f19259b-4bc3-4df7-8a09-765794883524
It has no obviously benefit to reduce size by PcdPcdInfoGeneration, so remove this PCD.
And PCD_INFO_GENERATION flag can be used to enable/disable PCD info feature, a sample is added in Nt32Pkg to show how to use this flag.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14870 6f19259b-4bc3-4df7-8a09-765794883524
It has no obviously benefit to reduce size by PcdPcdInfoGeneration, so remove this PCD.
And PCD_INFO_GENERATION flag can be used to enable/disable PCD info feature, a sample is added in Nt32Pkg to show how to use this flag.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14869 6f19259b-4bc3-4df7-8a09-765794883524
Since this is expected to use a string with spaces between some of the numbers, the function must halt on spaces and not skip them.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jaben Carsey <Jaben.carsey@intel.com>
Reviewed-by: Erik Bjorge <erik.c.bjorge@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14854 6f19259b-4bc3-4df7-8a09-765794883524
Make sure that “help App” and “help App.EFI” work the same by removing “.efi” (case insensitive) from the end of the string before searching for MAN file.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Erik Bjorge <erik.c.bjorge@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14853 6f19259b-4bc3-4df7-8a09-765794883524
There were 2 "STR_UCS2" strings. This renames one of them so they are unique.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jaben Carsey <Jaben.carsey@intel.com>
Reviewed-by: Erik Bjorge <erik.c.bjorge@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14852 6f19259b-4bc3-4df7-8a09-765794883524
- Add DiskIO2 to list of known protocols
- Fix string check to be case insensitive for commands like ‘dh –p protocolname’
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chris Phillips <chrisp@hp.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14851 6f19259b-4bc3-4df7-8a09-765794883524
QemuFlashFvbServicesRuntimeDxe provides actual persistent storage for
non-volatile variables. When it is active, any on-disk NvVars file counts
as a stale source of variables -- hence don't load these files in BDS.
This also allows Secure Boot settings (eg. enrolled keys) to survive cold
VM reboots.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14844 6f19259b-4bc3-4df7-8a09-765794883524
PcdFlashNvStorageVariableBase64 is used to arbitrate between
QemuFlashFvbServicesRuntimeDxe and EmuVariableFvbRuntimeDxe, but even the
latter driver sets it if we fall back to it.
Allow code running later than the startup of these drivers to know about
the availability of flash variables, through a dedicated PCD.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14843 6f19259b-4bc3-4df7-8a09-765794883524
If the QEMU version is found to be >= 1.6, then automatically
enable flash (using the QEMU pflash command line parameter).
QEMU supports flash since 1.2, but only if KVM is disabled.
As of QEMU 1.6, flash support should also be enabled when
KVM is used. Therefore it is safest to only enable flash for
QEMU 1.6 and newer.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14842 6f19259b-4bc3-4df7-8a09-765794883524
If this argument is used, then when QEMU is run, the -pflash
parameter will be used with QEMU to enable QEMU's flash
mode.
It should be used before the 'qemu' argument, since it is
not a QEMU parameter, but instead it updates how build.sh
runs QEMU.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14841 6f19259b-4bc3-4df7-8a09-765794883524
This driver will support a flash FVB implementation if QEMU flash
is detected.
The driver is added to the apriori list to make sure it runs
before the EmuVariableFvbRuntimeDxe driver. If this driver detects
flash support, then it will disable the EmuVariableFvbRuntimeDxe
driver by setting PcdFlashNvStorageVariableBase64.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14840 6f19259b-4bc3-4df7-8a09-765794883524
If QEMU flash is detected, this module will install
FirmwareVolumeBlock support for the QEMU flash device.
It will also set PCDs with the results that:
1. OvmfPkg/EmuVariableFvbRuntimeDxe will be disabled
2. MdeModulePkg variable services will read/write flash directly
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14839 6f19259b-4bc3-4df7-8a09-765794883524
If QEMU flash is supported, then the PcdFlashNvStorageVariableBase64
will be set by the flash FVB driver. If it is set to a non-zero value,
then we disable memory based variables.
In future patches we will add the flash FVB driver and
force it to run before this driver. Therefore, if QEMU flash
writing is supported, then this driver will be disabled.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14838 6f19259b-4bc3-4df7-8a09-765794883524
In a later patch we will want to mark the flash memory as a
runtime services data memory range. This will allow a new runtime
services firmware block driver to read & write flash memory when
the OS has set up virtual memory protection.
Since this memory range will appear as runtime services data, we
need to adjust the limit when scanning for PCI window 32 down to
just below the flash device. If we don't adjust the limit, then
the algorithm in PopulateFwData will fail because it will see a
EfiGcdMemoryTypeSystemMemory memory range just below 4GB.
v2:
* This patch replaces the v1 patch:
"OvmfPkg/AcpiPlatformDxe/Qemu: Allow high runtime memory regions"
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14837 6f19259b-4bc3-4df7-8a09-765794883524
This is to prepare for QEMU flash support which will allow
non-volatile variables to be saved in the flash image.
Note two size changes:
* NV Varstore size increased from 0xc000 to 0xe000
* FTW work size decreased from 0x2000 to 0x1000
The reason for this change is that the fault-tolerant write
support requires that the work area fit within the block
just before the fault-tolerant write spare storage blocks.
Since QEMU flash blocks have a size of 0x1000, this means
that the maximum FTW work size is 0x1000.
v2:
* Update commit message and PcdVariableStoreSize
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14835 6f19259b-4bc3-4df7-8a09-765794883524
The 1MB image with full debug and the shell included is too
large to implement flash based non-volatile variable.
After this change, building with -D FD_SIZE_1MB will
force the smaller flash size.
The default size for RELEASE build remains at 1MB, so using
-b RELEASE on the build command line will result in a
1MB flash size. For RELEASE builds -D FD_SIZE_2MB can be
used to produce a 2MB flash image.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14833 6f19259b-4bc3-4df7-8a09-765794883524
Chris Phillips
Star Zeng
Long, Qin
Laszlo Ersek
Lee Leahy
Jaben Carsey
Gary Ching-Pang Lin
Eric Dong
Shumin Qiu
Jordan Justen
Feng Tian
Wu Jiaxin
Bob C Feng
Liming Gao
Ruiyu Ni