REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2465
Commit 89164babec:
UefiCpuPkg/MpInitLib: don't shadow the microcode patch twice.
attempted to use 'MicrocodePatchRegionSize' and 'MicrocodePatchAddress'
fields to avoid loading the microcode patches data into memory again in
the DXE phase.
However, the CPU_MP_DATA structure has members with type 'UINTN' or
pointer before the microcode patch related fields. This may cause issues
when PEI and DXE are of different archs (e.g. PEI - IA32, DXE - x64),
since the microcode patch related fields will have different offsets in
the CPU_MP_DATA structure.
Commit 88bd066166:
UefiCpuPkg/MpInitLib: Relocate microcode patch fields in CPU_MP_DATA
tried to resolve the above-mentioned issue by relocating the fields
'MicrocodePatchRegionSize' and 'MicrocodePatchAddress' before members with
different size between different archs. But it failed to take the case of
pre-built binaries (e.g. FSP) into consideration.
Binaries can be built when the code base had a different version of the
CPU_MP_DATA structure definition. This may cause issues when accessing
these microcode patch related fields, since their offsets are different
(between PEI phase in the binaries and DXE phase in current code
implementation).
This commit will use the newly introduced EDKII microcode patch HOB
instead for the DXE phase to get the information of the loaded microcode
patches data done in the PEI phase. And the 'MicrocodePatchRegionSize' and
'MicrocodePatchAddress' fields in CPU_MP_DATA will not be used to pass
information between phases.
For pre-built binaries, they can be classified into 3 types with regard to
the time when they are being built:
A. Before commit 89164babec
(In other words, 'MicrocodePatchRegionSize' and 'MicrocodePatchAddress'
were not being used to skip microcode load in DXE)
For this case, the EDKII microcode patch HOB will not be produced. This
commit will load the microcode patches data again in DXE. Such behavior is
the same with the code base back then.
B. After commit 89164babec, before commit e1ed55738e
(In other words, 'MicrocodePatchRegionSize' and 'MicrocodePatchAddress'
being used to skip microcode load in DXE, but failed to work properly
between differnt archs.)
For this case, the EDKII microcode patch HOB will not be produced as well.
This commit will also load the microcode patches data again in DXE.
But since commit 89164babec failed to keep the detection and application
of microcode patches working properly in DXE after skipping the load, we
fall back to the origin behavior (that is to load the microcode patches
data again in DXE).
C. After commit e1ed55738e
(In other words, EDKII microcode patch HOB will be produced.)
For this case, it will have the same behavior with the BIOS built from
the current source codes.
Cc: Michael Kubacki <michael.a.kubacki@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
This reverts commit 88bd066166.
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2465
Commit 88bd066166 relocates the 'MicrocodePatchAddress' and
'MicrocodePatchRegionSize' fields in structure CPU_MP_DATA to ensure that
they can be properly passed between different architectures.
However, such change is not backward compatible with the scenario like
pre-existing binaries such as FSP. These binaries are built when the code
base has a different version of the CPU_MP_DATA structure definition. This
may cause issues when accessing the 'MicrocodePatchAddress' and
'MicrocodePatchRegionSize' fields, since their offsets are different
(between PEI phase in the FSP binaries and DXE phase in current code
implementation).
Cc: Michael Kubacki <michael.a.kubacki@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Fix various typos in comments and documentation.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Antoine Coeur <coeur@gmx.fr>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200207010831.9046-79-philmd@redhat.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2498
Commit fd30b00707 updated the logic in function MicrocodeDetect() that
will directly use the CPUID and PlatformID information from the 'CpuData'
field in the CPU_MP_DATA structure, instead of collecting these
information for each processor via AsmCpuid() and AsmReadMsr64() calls
respectively.
At that moment, this approach worked fine for APs. Since:
a) When the APs are waken up for the 1st time (1st MpInitLibInitialize()
entry at PEI phase), the function InitializeApData() will be called for
each AP and the CPUID and PlatformID information will be collected.
b) During the 2nd entry of MpInitLibInitialize() at DXE phase, when the
APs are waken up again, the function InitializeApData() will not be
called, which means the CPUID and PlatformID information will not be
collected. However, the below logics in MicrocodeDetect() function:
CurrentRevision = GetCurrentMicrocodeSignature ();
IsBspCallIn = (ProcessorNumber == (UINTN)CpuMpData->BspNumber) ? TRUE : FALSE;
if (CurrentRevision != 0 && !IsBspCallIn) {
//
// Skip loading microcode if it has been loaded successfully
//
return;
}
will ensure that the microcode detection and application will be
skipped due to the fact that such process has already been done in the
PEI phase.
But after commit 396e791059, which removes the above skip loading logic,
the CPUID and PlatformID information on APs will be used upon the 2nd
entry of the MpInitLibInitialize(). But since the CPUID and PlatformID
information has not been collected, it will bring issue to the microcode
detection process.
This commit will update the logic in MicrocodeDetect() back to always
collecting the CPUID and PlatformID information explicitly.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2474
Previous commit d786a17232:
UefiCpuPkg/MpInitLib: Reduce the size when loading microcode patches
Removed the below assignments for the 'InitFlag' field of CPU_MP_DATA
structure in function MpInitLibInitialize() when APs are waken up to do
some initialize sync:
CpuMpData->InitFlag = ApInitReconfig;
...
CpuMpData->InitFlag = ApInitDone;
The above commit mistakenly assumed the 'InitFlag' field will have a value
of 'ApInitDone' when the APs have been successfully waken up before. And
since there is no explicit comparision for the 'InitFlag' field with the
'ApInitReconfig' value. The commit removed those assignments.
However, under some cases (e.g. when variable OldCpuMpData is not NULL,
which means function CollectProcessorCount() will not be called), removing
the above assignments will left the 'InitFlag' field being uninitialized
with a value of 0, which is a invalid value for the type of 'InitFlag'
(AP_INIT_STATE).
It may potentially cause the WakeUpAP() function to run some unnecessary
codes when the APs have been successfully waken up before:
if (CpuMpData->WakeUpByInitSipiSipi ||
CpuMpData->InitFlag != ApInitDone) {
ResetVectorRequired = TRUE;
AllocateResetVector (CpuMpData);
FillExchangeInfoData (CpuMpData);
SaveLocalApicTimerSetting (CpuMpData);
}
This commit will address the above-mentioned issue.
Test done:
* OS boot on a real platform with multi processors
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
The existing MpInitLib will shadow the microcode update patches from
flash to memory and this is done by searching microcode region specified
by PCD PcdCpuMicrocodePatchAddress and PcdCpuMicrocodePatchRegionSize.
This brings a limition to platform FW that all the microcode patches must
be placed in one continuous flash space.
This patch shadows microcode update according to FIT microcode entries if
it's present, otherwise it will fallback to original logic (by PCD).
A new featured PCD gUefiCpuPkgTokenSpaceGuid.PcdCpuShadowMicrocodeByFit
is added for enabling/disabling this support.
TEST: Tested on FIT enabled platform.
BZ: https://tianocore.acgmultimedia.com/show_bug.cgi?id=2449
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Siyuan Fu <siyuan.fu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Add code to set SMXE in CR4 in the SmxInitialize flow when SMX is enabled.
Signed-off-by: Jason Voelz <jason.voelz@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
This patch updates the microcode loader to always perform a microcode
detect and load on both BSP and AP processor. This is to fix a potential
microcode revision mismatch issue in below situation:
1. Assume there are two microcode co-exists in flash: one production
version and one debug version microcode.
2. FIT loads production microcode to BSP and all AP.
3. UefiCpuPkg loader loads debug microcode to BSP, and skip the loading
on AP.
As a result, different microcode patches are loaded to BSP and AP, and
trigger microcode mismatch error during OS boot.
BZ link: https://bugzilla.tianocore.org/show_bug.cgi?id=2431
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Siyuan Fu <siyuan.fu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
This patch removes the unnecessary alignment check on microcode patch
TotalSize introduced by commit d786a172. The TotalSize has already been
checked with 1K alignment and MAX_ADDRESS in previous code as below:
if ( (UINTN)MicrocodeEntryPoint > (MAX_ADDRESS - TotalSize) ||
((UINTN)MicrocodeEntryPoint + TotalSize) > MicrocodeEnd ||
(DataSize & 0x3) != 0 ||
(TotalSize & (SIZE_1KB - 1)) != 0 ||
TotalSize < DataSize
) {
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Signed-off-by: Siyuan Fu <siyuan.fu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Previous commits have introduced below fields in structure CPU_AP_DATA:
UINT32 ProcessorSignature;
UINT8 PlatformId;
UINT64 MicrocodeEntryAddr;
which store the information of:
A. CPUID
B. Platform ID
C. Detected microcode patch entry address (including the microcode patch
header)
for each processor within system.
Therefore, the below fields in structure CPU_MP_DATA:
UINT32 ProcessorSignature;
UINT32 ProcessorFlags;
UINT64 MicrocodeDataAddress;
UINT32 MicrocodeRevision;
which store the BSP's information of:
A. CPUID
B. Platform ID
C. The address and revision of detected microcode patch
are redundant and can be removed.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
The below 2 microcode patch related fields in structure CPU_MP_DATA:
UINT64 MicrocodePatchAddress;
UINT64 MicrocodePatchRegionSize;
They will be passed from PEI phase and be reused DXE phase.
Previously, these 2 fields were placed after some fields with type
'UINTN', this will lead to different field offset in different
architecture for them.
This commit will move them before the fields with different size in
different architecture to ensure they can be properly used in DXE phase.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2430
This commit will update the MpInitLib to:
A. Collect the base address and size information after microcode patches
being loaded into memory;
B. Collect the detected microcode patch for each processor within system;
C. Based on the collected information, produce the EDKII microcode patch
HOB.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2429
This commit will attempt to reduce the copy size when loading the
microcode patches data from flash into memory.
Such optimization is done by a pre-process of the microcode patch headers
(on flash). A microcode patch will be loaded into memory only when the
below 3 criteria are met:
A. With a microcode patch header (which means the data is not padding data
between microcode patches);
B. The 'ProcessorSignature' & 'ProcessorFlags' fields in the header match
at least one processor within system;
C. If the Extended Signature Table exists in a microcode patch, the
'ProcessorSignature' & 'ProcessorFlag' fields in the table entries
match at least one processor within system.
Criterion B and C will require all the processors to be woken up once to
collect their CPUID and Platform ID information. Hence, this commit will
move the copy, detect and apply of microcode patch on BSP and APs after
all the processors have been woken up.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2429
This commit will collect the CPUID and Platform ID information for each
processor within system. They will be stored in the CPU_AP_DATA structure.
These information will be used in the next commit to decide whether a
microcode patch will be loaded into memory.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
In MpLib.c, remove the white space on a new line.
In PageTbl.c and PiSmmCpuDxeSmm.h, update the comment style.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2329
XD (ExecutionDisable) feature, when turned on, allows page table
entry BIT63 set to 1 indicating the memory pointed by the page table
is disallowed to execute.
DxeIpl::CreateIdentityMappingPageTables() enables the XD when CPU
supports it.
Later DxeCore modifies the page table to set the BIT63 to protect
the stack/heap to disallow code execution in stack/heap.
UefiCpuPkg/CpuCommonFeaturesLib enables/disables the XD feature
according to PcdCpuFeaturesSetting.
When XD is disabled, GP fault is generated immediately because some
page entries have BIT63 set.
To fix this issue, this patch removes the XD feature logic from
UefiCpuPkg/CpuCommonFeaturesLib so the XD feature is only taken
care of by DxeIpl.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
MpInitLib sets X2ApicEnable in two places.
1. CollectProcessorCount()
This function is called when MpInitLibInitialize() hasn't been
called before.
It sets X2ApicEnable and later in the same function it configures
all CPUs to operate in X2 APIC mode.
2. MpInitLibInitialize()
The X2ApicEnable setting happens when this function is called in
second time. But after that setting, no code consumes that flag.
With the above analysis and with the purpose of simplifying the code,
the X2ApicEnable in #1 is changed to local variable and the #2 can be
changed to remove the setting of X2ApicEnable.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Today's logic sets X2ApicEnable flag in each AP's initialization
path when InitFlag == ApInitConfig.
Since all CPUs update the same global data, a spin-lock is used
to avoid modifications from multiple CPUs happen at the same time.
The spin-lock causes two problems:
1. Potential performance downgrade.
2. Undefined behavior when improper timer lib is used.
For example we saw certain platforms used AcpiTimerLib from
PcAtChipsetPkg and that library depends on retrieving PeiServices
from idtr. But in fact AP's (idtr - 4) doesn't point to
PeiServices.
The patch simplifies the code to let BSP set the X2ApicEnable flag so
the spin-lock acquisition from AP is not needed any more.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
- If a platform boots such that the boot CPU count is smaller than
PcdCpuMaxLogicalProcessorNumber, then the platform cannot use the "fast
AP detection" logic added in commit 6e1987f19a. (Which has been
documented as a subset of use case (2) in the previous patch.)
Said logic depends on the boot CPU count being equal to
PcdCpuMaxLogicalProcessorNumber. If the equality does not hold, the
platform either has to wait too long, or risk missing APs due to an
early timeout.
- The platform may not be able to use the variant added in commit
0594ec417c either. (Which has been documented as use case (1) in the
previous patch.)
See commit 861218740d. When OVMF runs on QEMU/KVM, APs may check in
with the BSP in arbitrary order, plus the individual AP may take
arbitrarily long to check-in. If "NumApsExecuting" falls to zero
mid-enumeration, APs will be missed.
Allow platforms to specify the exact boot CPU count, independently of
PcdCpuMaxLogicalProcessorNumber. In this mode, the BSP waits for all APs
to check-in regardless of timeout. If at least one AP fails to check-in,
then the AP enumeration hangs forever. That is the desired behavior when
the exact boot CPU count is known in advance. (A hung boot is better than
an AP checking-in after timeout, and executing code from released
storage.)
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1515
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Before adding another AP enumeration mode, clarify the documentation on
the current logic. No functional changes.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1515
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2150
v4:
The v3 posting didn't do what it promised to do, so do it now for real.
V3 changes:
change to mov instruction (non locking instuction) instead
of xchg to simplify design.
V2 changes:
Add xchg 16 bit instructions to handle sgdt and sidt base
63:48 bits and 47:32 bits.
Add comment to explain why xchg 64bit isnt being used
Split lock happens when a locking instruction is used on mis-aligned data
that crosses two cachelines. If close source platform enables Alignment
Check Exception(#AC), They can hit a double fault due to split lock being
in CpuExceptionHandlerLib.
sigt and sgdt saves 10 bytes to memory, 8 bytes is base and 2 bytes is limit.
The data is mis-aligned, can cross two cacheline, and a xchg
instruction(locking instuction) is being utilize.
Signed-off-by: John E Lofgren <john.e.lofgren@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1909
Cc: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Amy Chan <amy.chan@intel.com>
Cc: Rangasai V Chaganty <rangasai.v.chaganty@intel.com>
Signed-off-by: Donald Kuo <donald.kuo@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2040
Below code is current implementation:
if (MsrRegister[ProcessorNumber].Bits.Lock == 0) {
CPU_REGISTER_TABLE_WRITE_FIELD (
ProcessorNumber,
Msr,
MSR_IA32_FEATURE_CONTROL,
MSR_IA32_FEATURE_CONTROL_REGISTER,
Bits.Lock,
1
);
}
1. In first normal boot, the Bits.Lock is 0, 1 will be added
into the register table and then will set to the MSR.
2. Trig warm reboot, MSR value preserves. After normal boot phase,
the Bits.Lock is 1, so it will not be added into the register
table during the warm reboot phase.
3. Trig S3 then resume, the Bits.Lock change to 0 and Bits.Lock is
not added in register table, so it's still 0 after resume. This
is not an expect behavior. The expect value is the value should
always 1 after booting or resuming from S3.
The root cause for this issue is
1. driver bases on current value to insert the "set value action" to
the register table.
2. Some MSRs may reserve their value during warm reboot.
The solution for this issue is using new added macros for the MSRs which
preserve value during warm reboot.
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2040
Supports new logic which test current value before write new value.
Only write new value when current value not same as new value.
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2040
Add below new micros which test the current value before write the new
value. Only write new value when current value not same as new value.
CPU_REGISTER_TABLE_TEST_THEN_WRITE32
CPU_REGISTER_TABLE_TEST_THEN_WRITE64
CPU_REGISTER_TABLE_TEST_THEN_WRITE_FIELD
Also add below API:
CpuRegisterTableTestThenWrite
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2060
Remove the useless ConsoleLogLock spinlock.
Signed-off-by: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Eric Dong <eric.dong@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2008
MpInitLib is the library that's responsible to wake up APs to provide
MP PPI and Protocol services.
The patch synchronizes BSP's CR4.LA57 to each AP's CR4.LA57.
Without this change, AP may enter to GP fault when BSP's 5-level page
table is set to AP during AP wakes up.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Eric Dong <eric.dong@intel.com>
This debug message may be called by BSP and APs. It may
caused ASSERT when APs call this debug code.
In order to avoid system boot assert, Remove this debug
message.
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1982
MpInitLibInitialize in MpLib.c will be invoked on both PEI and DXE
CPU code, MicrocodeDetect would be performed twice and copy
Microcode from flash to memory twice as well, which consider as
duplicate work to lead longer boot time.
This patch just use microcode memory copied in PEI phase if exist.
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1973
For semaphore type register, it required all processors to do the
task at the same time.
Current logic begins BSP's task after all APs have finished their tasks.
This will caused set semaphore task hang if semaphore has package
level type.
This patch use new EDKII_PEI_MP_SERVICES2_PPI to start all processors at
the same time to fix the potential hang issue.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Chandana Kumar <chandana.c.kumar@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1973
Add new MpInitLibStartupAllCPUs API uses to start all processors
at the same time.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Chandana Kumar <chandana.c.kumar@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1973
Add new MpInitLibStartupAllCPUs API uses to start all processors
at the same time.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Chandana Kumar <chandana.c.kumar@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1972
Function in this library may be used by APs. Assert will be trig if AP
uses dynamic pcd.
This patch enhance the current code, remove the unnecessary usage of
dynamic PCD. This change try to avoid report this issue again later.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Chandana Kumar <chandana.c.kumar@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1972
AP calls CollectProcessorData() to collect processor info.
CollectProcessorData function finally calls PcdGetSize function to
get DynamicPCD PcdCpuFeaturesSetting value. PcdGetSize will use
PeiServices table which caused below assert info:
Processor Info: Package: 1, MaxCore : 4, MaxThread: 1
Package: 0, Valid Core : 4
ASSERT [CpuFeaturesPei] c:\projects\jsl\jsl_v1193\Edk2\MdePkg\Library
\PeiServicesTablePointerLibIdt\PeiServicesTablePointer.c(48):
PeiServices != ((void *) 0)
This change uses saved global pcd size instead of calls PcdGetSize to
fix this issue.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Chandana Kumar <chandana.c.kumar@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1968
The new VS2012 build failure is caused by 7a0df26.
xxx\registercpufeatureslib\dxeregistercpufeatureslib.c(258) :
warning C4701: potentially uninitialized local variable 'MpEvent' used
It is a false positive alarm.
MpEvent is assigned at line 238 and will be used at line 258, both
lines are controlled by "if (CpuFeaturesData->NumberOfCpus > 1)".
This patch initializes MpEvent to suppress incorrect compiler/analyzer
warnings.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1961
Enhance Ppin code to enable and unlock for TRUE State,
and disable and lock for FALSE State.
Note: enable and lock could not be set both.
According to SDM, once Enable_PPIN is set, attempt to write
1 to LockOut will cause #GP, and writing 1 to LockOut is
permitted only if Enable_PPIN is clear.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Chandana Kumar <chandana.c.kumar@intel.com>
Cc: Kevin Li <kevin.y.li@intel.com>
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1968
We met assertion like below, it happens when there is only
one processor.
ASSERT_EFI_ERROR (Status = Not started)
ASSERT [CpuFeaturesDxe] X:\XXX\XXX\RegisterCpuFeaturesLib\
DxeRegisterCpuFeaturesLib.c(149): !EFI_ERROR (Status)
The code should not call StartupAllAPs when there is only one processor.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Chandana Kumar <chandana.c.kumar@intel.com>
Cc: Kevin Li <kevin.y.li@intel.com>
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1934
0x0 MicrocodeBegin MicrocodeEntry MicrocodeEnd 0xffffffff
|--------------|---------------|---------------|---------------|
valid TotalSize
TotalSize is only valid between 0 and (MicrocodeEnd - MicrocodeEntry).
So add '(UINTN)MicrocodeEntryPoint > (MAX_ADDRESS - TotalSize)' before
'((UINTN)MicrocodeEntryPoint + TotalSize) > MicrocodeEnd' to make sure
((UINTN)MicrocodeEntryPoint + TotalSize) wouldn't overflow.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
The patch fixes the bug that the memory under 1MB is modified by
firmware in S3 boot.
Root cause is a racing condition in MpInitLib:
1. BSP: WakeUpByInitSipiSipi is set by NotifyOnS3SmmInitDonePpi()
2. BSP: WakeUpAP() wakes all APs to run certain procedure.
2.1. AllocateResetVector() uses <1MB memory for wake up vector.
2.1. FillExchangeInfoData() resets NumApsExecuting to 0.
2.2. WaitApWakeup() waits AP to clear WAKEUP_AP_SIGNAL.
3. AP: ApWakeupFunction() clears WAKEUP_AP_SIGNAL to inform BSP.
5. BSP: FreeResetVector() restores the <1MB memory
4. AP: ApWakeupFunction() calls the certain procedure.
4.1. NumApsExecuting is decreased.
#4.1 happens after the 1MB memory is restored so the result is
memory below 1MB is changed by #4.1
It happens only when the AP executes procedure a bit longer.
AP returns back to ApWakeupFunction() from procedure after
BSP restores the <1MB memory.
Since NumApsExecuting is only used when InitFlag == ApInitConfig
for counting the processor count.
The patch moves the NumApsExecuting decrease to the path when
InitFlag == ApInitConfig.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Nandagopal Sathyanarayanan <nandagopal.sathyanarayanan@intel.com>
NumApsExecuting is only used when InitFlag == ApInitConfig for
counting the processor count.
The patch changes Ia32 version of waking up vector assembly code
to align to x64 version of waking up vector assembly code.
After the change both versions of waking up vector increase
NumApsExecuting when InitFlag == ApInitConfig.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1810
This patch covers two problems.
1. Current code gets CPUID_THERMAL_POWER_MANAGEMENT in
ClockModulationInitialize() and uses its ECMD bit for all processors.
But ClockModulationInitialize() is only executed by BSP, that means
the bit is just for BSP.
It may have no functionality issue as all processors may have same
bit value in a great possibility. But for good practice, the code
should get CPUID_THERMAL_POWER_MANAGEMENT in ClockModulationSupport
(executed by all processors), and then use them in
ClockModulationInitialize() for all processors.
We can see that Aesni.c (and others) have used this good practice.
2. Current code uses 3 CPU_REGISTER_TABLE_WRITE_FIELD for
MSR_IA32_CLOCK_MODULATION in ClockModulationInitialize(), they can
be reduced to 1 CPU_REGISTER_TABLE_WRITE64 by getting
MSR_IA32_CLOCK_MODULATION for all processors in
ClockModulationSupport() and then update fields for register table
write in ClockModulationInitialize().
We may argue that there may be more times of MSR_IA32_CLOCK_MODULATION
getting. But actually the times of MSR_IA32_CLOCK_MODULATION getting
could be also reduced.
The reason is in ProgramProcessorRegister() of CpuFeaturesInitialize.c,
AsmMsrBitFieldWrite64 (AsmReadMsr64 + AsmWriteMsr64) will be used for
CPU_REGISTER_TABLE_WRITE_FIELD, and AsmWriteMsr64 will be used for
CPU_REGISTER_TABLE_WRITE64.
The times of MSR accessing could be reduced with this patch.
Without the patch:
3 CPU_REGISTER_TABLE_WRITE_FIELD (in ClockModulationInitialize)
==> 3 AsmMsrBitFieldWrite64
==> 3 AsmReadMsr64 + 3 AsmWriteMsr64
With the patch:
1 AsmReadMsr64 (in ClockModulationSupport) +
1 CPU_REGISTER_TABLE_WRITE64 (in ClockModulationInitialize)
==> 1 AsmWriteMsr64
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Chandana Kumar <chandana.c.kumar@intel.com>
Cc: Kevin Li <kevin.y.li@intel.com>
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1829
There will be ASSERT if LMCE is supported as below.
DXE_ASSERT!: [CpuFeaturesDxe]
XXX\UefiCpuPkg\Library\CpuCommonFeaturesLib\MachineCheck.c (342):
ConfigData != ((void *) 0)
The code should get Config Data and FeatureControlGetConfigData
could be used.
This issue is there since the code was added at the commit below.
Revision: 3d6275c113
Date: 2017/8/4 8:46:41
UefiCpuPkg CpuCommonFeaturesLib: Enable LMCE feature.
The commits below are also related to move the code.
Revision: 0233871442
Date: 2017/9/1 10:12:38
UefiCpuPkg/Lmce.c Remove useless file.
Revision: 306a5bcc6b
Date: 2017/8/17 11:40:38
UefiCpuPkg/CpuCommonFeaturesLib: Merge machine check code to same file.
So, the code may not be tested at all on a platform
that supports LMCE.
BTW: A typo in LmceInitialize is also fixed.
The typo is introduced by the commit below.
Revision: d28daaddb3
Date: 2018/10/17 9:24:05
UefiCpuPkg/CpuCommonFeaturesLib: Register MSR base on scope Info.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Chandana Kumar <chandana.c.kumar@intel.com>
Cc: Kevin Li <kevin.y.li@intel.com>
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1808
In current code, the values of TopaEntryPtr->Uint64 for TopaTable
and the values of OutputBaseReg.Uint64 and OutputMaskPtrsReg.Uint64
to register table write for RTIT_OUTPUT_BASE and RTIT_OUTPUT_MASK_PTRS
are not been initialized in whole. For example, the reserved bits in
OutputBaseReg.Uint64 are random that will cause GP fault like below
when SetProcessorRegister (in CpuFeaturesInitialize.c) sets register
based on register table.
!!!! X64 Exception Type - 0D(#GP - General Protection)
CPU Apic ID - 00000000 !!!!
ExceptionData - 0000000000000000
RIP -0000000064D69576, CS -0000000000000038, RFLAGS -0000000000010246
RAX -000000006B9F1001, RCX -0000000000000560, RDX -0000000000000000
RBX -0000000064EECA18, RSP -000000006CB82BA0, RBP -0000000000000008
RSI -0000000080000000, RDI -0000000000000011
R8 -000000006B9493D0, R9 -0000000000000010, R10 -00000000000000FF
R11 -000000006CB82A50, R12 -0000000064D70F50, R13 -0000000066547050
R14 -0000000064E3E198, R15 -0000000000000000
DS -0000000000000030, ES -0000000000000030, FS -0000000000000030
GS -0000000000000030, SS -0000000000000030
CR0 -0000000080010013, CR2 -0000000000000000, CR3 -000000006C601000
CR4 -0000000000000628, CR8 -0000000000000000
DR0 -0000000000000000, DR1 -0000000000000000, DR2 -0000000000000000
DR3 -0000000000000000, DR6 -00000000FFFF0FF0, DR7 -0000000000000400
GDTR -000000006B8CCF18 0000000000000047, LDTR -0000000000000000
IDTR -000000006687E018 0000000000000FFF, TR -0000000000000000
FXSAVE_STATE -000000006CB82800
And current code gets MSR_IA32_RTIT_CTL, MSR_IA32_RTIT_OUTPUT_BASE and
MSR_IA32_RTIT_OUTPUT_MASK_PTRS in ProcTraceInitialize() and uses their
values for all processors. But ProcTraceInitialize() is only executed
by BSP, that means the values just for BSP. For good practice, the code
should get MSR_IA32_RTIT_CTL, MSR_IA32_RTIT_OUTPUT_BASE and
MSR_IA32_RTIT_OUTPUT_MASK_PTRS in ProcTraceSupport (executed by all
processors), and then use them in ProcTraceInitialize() for all
processors. This can also resolve the issue that the values of
OutputBaseReg.Uint64 and OutputMaskPtrsReg.Uint64 are not been
initialized in whole.
For TopaEntryPtr->Uint64, this patch updates code to initialize it
in whole explicitly by TopaEntryPtr->Uint64 = 0 before updating its
fields.
At the same time, this patch also eliminates the ProcTraceSupported
field in PROC_TRACE_PROCESSOR_DATA and the TopaMemArrayCount field in
PROC_TRACE_DATA.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Chandana Kumar <chandana.c.kumar@intel.com>
Cc: Kevin Li <kevin.y.li@intel.com>
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1809
Current code disables TraceEn at the end of ProcTraceInitialize(),
then there will be much memory allocated even when ProcTrace feature
is disabled.
This patch updates code to disable TraceEn and return at the beginning
of ProcTraceInitialize() when when ProcTrace feature is disabled.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Chandana Kumar <chandana.c.kumar@intel.com>
Cc: Kevin Li <kevin.y.li@intel.com>
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1679
The checking to CpuInfo->CpuIdVersionInfoEcx.Bits.AESNI is enough,
the checking to CPU generation could be removed, then the code
could be reused by more platforms.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Chandana Kumar <chandana.c.kumar@intel.com>
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
These files have \r\n line endings, but a few lines use \r\r\n which
is not a valid line ending. These lines were causing problems for git
and other tools.
Signed-off-by: Joe Richey <joerichey@google.com>
Review-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Add a new instance of the MpInitLib that is designed for
uniprocessor platforms that require the use of modules
that depend on the MP_SERVICES_PROTOCOL for dispatch
or to retrieve information about the boot processor.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Hao A Wu
Antoine Coeur
Siyuan Fu
Jason Voelz
Shenglei Zhang
Ray Ni
Laszlo Ersek
John E Lofgren
Donald Kuo
Dong, Eric
Star Zeng
Zhichao Gao
Joe Richey
Michael D Kinney