BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2938
C tool may add the additional INC include path. They should have
high priority than the common INC include path.
This fix is to resolve the structure PCD issue to refer to the same
header file defined in BaseTools and MdePkg. The one in MdePkg should
be used.
Cc: Yuwei Chen <yuwei.chen@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Signed-off-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Yuwei Chen<yuwei.chen@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Tested-by: Garrett Kirkendall <garrett.kirkendall@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2938
MdePkg Acpi10.h definition depends on PACKED.
When structure PCD refers to Acpi10.h, build will fail,
because PACKED definition is missing in BaseTools BaseTypes.h.
C source tools include BaseTools BaseTypes.h. They don't include MdePkg Base.h.
When C source tools include MdePkg Acpi10.h, they also need PACKED definition.
So, add PACKED definition into BaseTools BaseTypes.h.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Signed-off-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Tested-by: Garrett Kirkendall <garrett.kirkendall@amd.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2881
Currently, the build tool try to read the section alignment
from efi file if the section alignment type is Auto.
If there is no efi generated, the section alignment will
be set to zero. This behavior causes the Makefile to be different
between the full build and the incremental build.
Since the Genffs can auto get the section alignment from
efi file during Genffs procedure, the build tool can just set section
alignment as zero. This change can make the autogen makefile
consistent for the full build and the incremental build.
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Yuwei Chen<yuwei.chen@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2978
If a module add a new PCD, the pcd token number will be
reassigned. The new Pcd token number should be updated
to all module's autogen files. CanSkip can only detect a
single module's change but not others. CanSkip block the
pcd token number update in incremental build, so this
patch is going to remove this call.
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Yuwei Chen<yuwei.chen@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2880
Currently, When doing the Incremental build, the directory
macros extended to absolute path in output Makefile, which
is inconsistent with the output of Clean build.
When we do macro replacement, we can't replace macro due to
inconsistent path case, which results in inconsistent display
of incremental build and clean build in makefile.Therefore,
the path is converted to achieve the correct macro replacement.
Signed-off-by: Mingyue Liang <mingyuex.liang@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Yuwei Chen <yuwei.chen@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2965
The content in Guid.xref depends on the files under the corresponding
ffs folder.(refer to the commit 5e9256cd7f)
To make Guid.xref update in the incremental build,
clean the files under that ffs folder before generating files in it.
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Yuwei Chen<yuwei.chen@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2882
After changing the name of the include source file,
when doing incremental build, the previous source file
is not covered in the. DEPs file, and a build error occurs.
The root cause is that the build tools filter out some dependency
files, which are listed in inf source section, from the deps_target file.
Add those files back to deps_target file to resolve the above problem.
Signed-off-by: Mingyue Liang <mingyuex.liang@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Yuwei Chen <yuwei.chen@intel.com>
The IASL extdep is used for CI only and a recent fork of the ACPICA
repo was made to make nuget builds more regular and easier to audit.
https://dev.azure.com/projectmu/_git/acpica
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Matthew Carlson <matthewfcarlson@gmail.com>
If VPD PcdNvStoreDefaultValueBuffer is used, all DynamicHii and
DynamicExHii PCD value will be generated into that VPD.
In order to generate the same VPD binary file in every build,
sort the Pcd set when generating VPD.
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2904
The path separator is different in Windows and Linux, the
original code does not handle this difference. This patch
is to fix this issue.
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Cc: Shenglei Zhang <shenglei.zhang@intel.com>
Message-Id: <20200901102315.38840-1-bob.c.feng@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
edksetup.bat VS2017 should set VS2017 only. But now,
it will set VS2017/VS2019 both. This patch corrects it.
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2896
When VS2017/VS2019 are both installed. VS prefix setting will
wrongly be set. VS2017_PREFIX is set to the same value of VS2019.
This patch clears VSINSTALLDIR and VCToolsVersion env, then
the different vcvars32 can set the correct VS env.
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2896
Keep the latest VS version as the last one
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
In python3, array.array.tostring() was a compat alias for tobytes().
tostring() was removed in python 3.9.
Convert this to use tolist() which should be valid for all python
versions.
This fixes this build error on python3.9:
(Python 3.9.0b5 on linux) Traceback (most recent call last):
File "/root/edk2/edk2-edk2-stable202002/BaseTools/BinWrappers/PosixLike/../../Source/Python/Trim/Trim.py", line 593, in Main
GenerateVfrBinSec(CommandOptions.ModuleName, CommandOptions.DebugDir, CommandOptions.OutputFile)
File "/root/edk2/edk2-edk2-stable202002/BaseTools/BinWrappers/PosixLike/../../Source/Python/Trim/Trim.py", line 449, in GenerateVfrBinSec
VfrUniOffsetList = GetVariableOffset(MapFileName, EfiFileName, VfrNameList)
File "/root/edk2/edk2-edk2-stable202002/BaseTools/Source/Python/Common/Misc.py", line 88, in GetVariableOffset
return _parseForGCC(lines, efifilepath, varnames)
File "/root/edk2/edk2-edk2-stable202002/BaseTools/Source/Python/Common/Misc.py", line 151, in _parseForGCC
efisecs = PeImageClass(efifilepath).SectionHeaderList
File "/root/edk2/edk2-edk2-stable202002/BaseTools/Source/Python/Common/Misc.py", line 1638, in __init__
if ByteArray.tostring() != b'PE\0\0':
AttributeError: 'array.array' object has no attribute 'tostring'
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
python3.9 changed/fixed codec.register behavior to always replace
hyphen with underscore for passed in codec names:
https://bugs.python.org/issue37751
So the custom Ucs2Search needs to be adapted to handle 'ucs_2' in
addition to existing 'ucs-2' for back compat.
This fixes test failures on python3.9, example:
======================================================================
FAIL: testUtf16InUniFile (CheckUnicodeSourceFiles.Tests)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/builddir/build/BUILD/edk2-edk2-stable202002/BaseTools/Source/Python/AutoGen/UniClassObject.py", line 375, in PreProcess
FileIn = UniFileClassObject.OpenUniFile(LongFilePath(File.Path))
File "/builddir/build/BUILD/edk2-edk2-stable202002/BaseTools/Source/Python/AutoGen/UniClassObject.py", line 303, in OpenUniFile
UniFileClassObject.VerifyUcs2Data(FileIn, FileName, Encoding)
File "/builddir/build/BUILD/edk2-edk2-stable202002/BaseTools/Source/Python/AutoGen/UniClassObject.py", line 312, in VerifyUcs2Data
Ucs2Info = codecs.lookup('ucs-2')
LookupError: unknown encoding: ucs-2
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
AsBuiltInf can be created during AutoGen phase. Move CreateAsBuiltInf
into AutoGenWorker to make this step run in parallel.
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2807
The Queue.empty() method is not reliable in the multiple
process runtime environment. This patch uses a new method
to check if all modules are processed and workers need
to be stopped. That is to add a None item at the bottom
of the queue. Worker check if it gets that None item to
know if all the module is processed.
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Cc: Lucy Yan <lucyyan@google.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2349
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
This reverts commit a4cfb842fc.
This commit suggests inclusion of non-edk2+license content without
a contribution agreement is something the community has made a
decision on, which is incorrect.
Cc: Shenglei Zhang <shenglei.zhang@intel.com>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
BZ:2864 GCC build fails due to variable self assignment.
This local variable is not used at any where, we can just remove it.
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Daniel Schaefer <daniel.schaefer@hpe.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This reverts commit dbd546a32d.
This patch also breaks about half of the ARM/AARCH64 platforms in edk2-platforms
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Pierre Gondois <pierre.gondois@arm.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
If the submodule is upgraded, skip the CRLF check as it isn't change for
file.
Signed-off-by: Guomin Jiang <guomin.jiang@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2624
When EFI file come from binary file, not generate .map file, so need ignore the map file.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Yunhua Feng <yunhuax.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2842
To use LLVM to build BaseTools, first set the CLANG_BIN environment value,
and add "CXX=llvm" to choose LLVM compiler set when using make command.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Yuwei Chen<yuwei.chen@intel.com>
During build, the meta files are not changed, so it's no need
to check file timestamp.
This patch is to remove useless logic.
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The ReadMe file is now RST, so update the filename extension to match.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
ReadMe.txt contained outdated information. Update it to match current
functionality (e.g. sqlite3 is no longer used), and convert the
formatting from ad-hoc to reStructuredText.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
GCC48_ALL_CC_FLAGS has no dependency on GCC_ALL_CC_FLAGS.
By definition, there should be such dependency.
The outcomes of this patch is that GCC48_ALL_CC_FLAGS and
other dependent configurations will inherit from the
additional "-Os" flag.
The "-Os" flag optimizes a build in size, not breaking any
build. In a gcc command line, the last optimization flag
has precedence. This means that this "-Os" flag will be
overriden by a more specific optimization configuration,
provided that this more specific flag is appended at the
end of the CC_FLAGS.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Suggested-by: Tomas Pilar <Tomas.Pilar@arm.com>
Reviewed-by: Bob Feng<bob.c.feng@intel.com>
By default, gcc allows void* pointer arithmetic.
This is a GCC extension.
However:
- the C reference manual states that void*
pointer "cannot be operands of addition
or subtraction operators". Cf s5.3.1
"Generic Pointers";
- Visual studio compiler treat such operation as
an error.
To prevent such pointer arithmetic, the "-Wpointer-arith"
flag should be set for all GCC versions.
The "-Wpointer-arith" allows to:
"Warn about anything that depends on the "size of"
a function type or of void. GNU C assigns these
types a size of 1, for convenience in calculations
with void * pointers and pointers to functions."
This flag is available since GCC2.95.3 which came out in 2001.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Bob Feng<bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2836
Current PatchCheck.py checks each line to ensure line's length is not
larger than 76. But there's a case that length of user's name is much
longer than that number. So enhance the script to handle this case.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Yuwei Chen<yuwei.chen@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2762
The Fv Section in the FDF files use hard coding Guid values
which is inconvenient to manage. This patch adds Guid name
support in GenFfs to solve this problem.
Signed-off-by: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Bob Feng<bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2797
Update HOST_APPLICATION module type to use NULL library instances.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Sean Brogan <sean.brogan@microsoft.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
SetupGit.py sets the git config option diff.orderFile to
{edk2 directory}/BaseTools/Conf/diff.order, to override the default order
in which files are shown in a diff/patch/whatever. This is in imitation
of what is done manually in Laszlo's Unkempt Guide.
However, the version currently in the tree is in CRLF format, which makes
git interpret e.g. *.c as matching on *.c<CR>, finding no matches and
failing to apply the desired reordering. Note: this is true regardless of
whether running on Linux or Windows.
Convert the file to LF-only to make it work as expected.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
On Debian 10 (Buster), when running PatchCheck.py with python2, a
backtrace is printed, starting from:
File "../edk2/BaseTools/Scripts/PatchCheck.py", line 595,
in find_patch_pieces
parts = email.header.decode_header(pmail.get('subject'))
AttributeError: 'module' object has no attribute 'header'
When using python3, this backtrace does not appear.
Explicitly importing email.header resolves this for python2 and does not
appear to cause any issues with python3.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
SetupGit.py adds BaseTools/Conf/diff.order as a diff orderfile, but that
file currently has CRLF line endings, which causes all pattern matches
to fail and the ordering remaining unaffected.
Add an exception to PatchCheck.py (to the existing .gitmodules clause),
so that we can merge the fix to the config file.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Using Python 3.7.2 on win32, when printing a FileBuildRule
instance, the following error occurs:
File "edk2\BaseTools\Source\Python\AutoGen\BuildEngine.py",
line 177, in __str__
DestString = ", ".join(self.DestFileList)
TypeError: sequence item 0: expected str instance, PathClass found
This patch converts each PathClass element of the list to a string
instance before concatenating them.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
The AmlToHex script and Posix/WindowsLike wrappers convert
an AML file to a .hex file, containing a C array storing
AML bytecode. This ".hex" file can then be included in a
C file, allowing to access the AML bytecode from this C
file.
The EDK2 build system doesn't allow to a depict dependency
orders between files of different languages. For instance,
in a module containing a ".c" file and a ".asl", the ".c"
file may or may not be built prior to the ".asl" file.
This prevents any inclusion of a generated ".hex" in a
".c" file since this later ".hex" file may or may not
have been created yet.
This patch modifies the AmlToC script to generate a C file
instead of a ".hex" file.
It also adds the generation of an intermediate ".amli" file
when compiling an ASL file, and adds a rule to convert this
".amli" to a C file.
This allows to generate a C file containing the AML bytecode
from an ASL file. This C file will then be handled by the EDK2
build system to generate an object file.
Thus, no file inclusion will be required anymore. The C file
requiring the AML bytecode as a C array, and the ASL file,
will be compiled independently. The C array must be defined
as an external symbol. The linker is resolving the
reference to the C array symbol.
To summarize, the flow goes as:
-1. ASL file is compiled to AML;
-2. AML file is copied to a ".amli" intermediate file;
-3. EDK2 build system applies the rule relevant to ".amli"
files. This is, calling the "AmlToC" script, generating
a C file from the ".amli" file;
-4. EDK2 build system applies the rule relevant to C files.
This is creating an object file.
-5. EDK2 build system links the object file containing the
AML bytecode with the object file requiring it.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Suggested-by: Tomas Pilar <Tomas.Pilar@arm.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
The AmlToHex script and Posix/WindowsLike wrappers convert
an AML file to a .hex file, containing a C array storing
AML bytecode. This ".hex" file can then be included in a
C file, allowing to access the AML bytecode from this C
file.
The EDK2 build system doesn't allow to a depict dependency
orders between files of different languages. For instance,
in a module containing a ".c" file and a ".asl", the ".c"
file may or may not be built prior to the ".asl" file.
This prevents any inclusion of a generated ".hex" in a
".c" file since this later ".hex" file may or may not
have been created yet.
This patch renames the script as AmlToC. It is posted as
a separate patch to prevent git from seeing the renaming
as a deletion plus addition of a new file.
The ending line of the posix-like bin-wrapper script has
also been corrected.
This is a first step toward generating a C file containing
the AML bytecode from an ASL file. This C file will then
be handled by the EDK2 build system to generate an object
file.
Thus, no file inclusion will be required anymore. The C file
requiring the AML bytecode as a C array, and the ASL file,
will be compiled independently. The C array must be defined
as an external symbol. The linker is resolving the
reference to the C array symbol.
To summarize, the flow goes as:
-1. ASL file is compiled to AML;
-2. AML file is copied to a ".amli" intermediate file;
-3. EDK2 build system applies the rule relevant to ".amli"
files. This is, calling the "AmlToC" script, generating
a C file from the ".amli" file;
-4. EDK2 build system applies the rule relevant to C files.
This is creating an object file.
-5. EDK2 build system links the object file containing the
AML bytecode with the object file requiring it.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Suggested-by: Tomas Pilar <Tomas.Pilar@arm.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
This patch modifies the Makefile generation not to stop
adding Makfile rules when the first final target is found.
E.g.:
If the following rules are described in build_rule.txt:
-[Rule1]: .X files generate .Y and .Z files;
-[Rule2]: .Z files generate .Z1 files.
Currently, if a File1.X file was part of the sources of a
module, only [Rule1] would be generated in the Makefile.
Indeed, there are no rules to apply to .Y files: .Y files
are a final target. However, there is still [Rule2] to
apply to .Z files.
This patch also adds a dependency between the first
ouput file of a rule and the other output files.
For instance, with the same example as above, File1.Y
and File1.Z are generated by the following rule:
File1.Y: File1.X
<Generate File1.Y>
<Generate File1.Z>
and the new dependency is:
File1.Z: File1.Y
This is necessary to keep a dependency order during the
execution of the Makefile. Indeed, .Y and .Z files are
generated by the execution of a common set of commands,
and without this rule, there is no explicit dependency
relation between them.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Suggested-by: Tomas Pilar <Tomas.Pilar@arm.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Bash scripts require LF line endings to work.
PatchCheck.py checks that the files added in a patch have CRLF
line endings. It excludes files ending with the ".sh" extension
from this check.
Some bash script don't have a ".sh" extension. Most of them are
located in:
- BaseTools/BinWrappers/PosixLike/
- BaseTools/Bin/CYGWIN_NT-5.1-i686/
This patch excludes these folder plus BaseTools/BuildEnv from
this CRLF check.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Add opensbi external definitions to RISC-V build for assembly
code. Use GCC5_RISCV_OPENSBI_TYPES to refer to edk2 data type
for assembly files instead of using opensbi data type.
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Daniel Schaefer <daniel.schaefer@hpe.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2691
For files to be added to the tree, this feature will check
whether it has BSD plus patent license. If not, licenses listed in
Readme are also accepted but warning will be reported.
Otherwise, it should be error.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2790
If the top FFS is placed in FV image, current FV will show there is no space.
In fact, the pad ffs in FV image can be regarded as the spare space.
This change reports the max pad ffs size as the spare space for use.
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2770
The Trim.py would break the build process when the file not found
issue occures, however sometimes we do not care about this issue.
This patch changes the error with warning in order to solve this
kind of break.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Bob Feng<bob.c.feng@intel.com>
AutoGen manager/workers halt the progress when an error occurs but
doesn't propagate the error code to main and allows main exit with 0
and gets the build system unable to catch the occurrence of an error.
This change informs main with an error when a progress is halted and
helps main exit with 1.
Signed-off-by: Irene Park <ipark@nvidia.com>
Reviewed-by: Bob Feng<bob.c.feng@intel.com>
fengyunhua
gaoliming
Nikita
Bob Feng
Mingyue Liang
Matthew Carlson
Liming Gao
Cole Robinson
Michael D Kinney
Leif Lindholm
Abner Chang
Jiang, Guomin
Feng, YunhuaX
Liu, Zhiguang
Rebecca Cran
Pierre Gondois
Shenglei Zhang
Yuwei Chen
Irene Park
Sami Mujawar