Flash can be write-protected in qemu (which is usually the case for
code). In case the variable store flash block is configured read-only
ovmf wouldn't be able to store EFI variables there, so not setting up
fvb in that case (and fallhack to emulation) is the better option.
It'll avoid problems later due to flash writes failing.
The patch tries to write back the original value read earlier, so flash
content doesn't change in case the write succeeds. But the status we
read back after the attempt to write will tell us whenever flash is
writable or not.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4123
APIs which are defined in CcExitLib.h are added with the CcExit prefix.
This is to make the APIs' name more meaningful.
This change impacts OvmfPkg/UefiCpuPkg.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4123
VmgExitLib once was designed to provide interfaces to support #VC handler
and issue VMGEXIT instruction. After TDVF (enable TDX feature in OVMF) is
introduced, this library is updated to support #VE as well. Now the name
of VmgExitLib cannot reflect what the lib does.
This patch renames VmgExitLib to CcExitLib (Cc means Confidential
Computing). This is a simple renaming and there is no logic changes.
After renaming all the VmgExitLib related codes are updated with
CcExitLib. These changes are in OvmfPkg/UefiCpuPkg/UefiPayloadPkg.
Cc: Guo Dong <guo.dong@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Cc: James Lu <james.lu@intel.com>
Cc: Gua Guo <gua.guo@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: James Lu <james.lu@intel.com>
Reviewed-by: Gua Guo <gua.guo@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
In an effort to clean the documentation of the above
package, remove duplicated words.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3737
Apply uncrustify changes to .c/.h files in the OvmfPkg package
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Andrew Fish <afish@apple.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3183
Under SEV-ES, a write to the flash device is done using a direct VMGEXIT
to perform an MMIO write. The address provided to the MMIO write must be
the physical address of the MMIO write destitnation. During boot, OVMF
runs with an identity mapped pagetable structure so that VA == PA and the
VMGEXIT MMIO write destination is just the virtual address of the flash
area address being written.
However, when the UEFI SetVirtualAddressMap() API is invoked, an identity
mapped pagetable structure may not be in place and using the virtual
address for the flash area address is no longer valid. This results in
writes to the flash not being performed successfully. This can be seen
by attempting to change the boot order under Linux. The update will
appear to be performed, based on the output of the command. But rebooting
the guest will show that the new boot order has not been set.
To remedy this, save the value of the flash base physical address before
converting the address as part of SetVirtualAddressMap(). The physical
address can then be calculated by obtaining the offset of the MMIO target
virtual address relative to the flash base virtual address and adding that
to the original flash base physical address. The resulting value produces
a successful MMIO write during runtime services.
Fixes: 437eb3f7a8
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <84a5f9161541db5aa3b57c96b737afbcb4b6189d.1611410263.git.thomas.lendacky@amd.com>
[lersek@redhat.com: SetVitualAddressMap() -> SetVirtualAddressMap() typo
fix, in both the commit message and the code comment]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3008
The QemuFlashPtrWrite() flash services runtime uses the GHCB and VmgExit()
directly to perform the flash write when running as an SEV-ES guest. If an
interrupt arrives between VmgInit() and VmgExit(), the Dr7 read in the
interrupt handler will generate a #VC, which can overwrite information in
the GHCB that QemuFlashPtrWrite() has set. This has been seen with the
timer interrupt firing and the CpuExceptionHandlerLib library code,
UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/
Xcode5ExceptionHandlerAsm.nasm and
ExceptionHandlerAsm.nasm
reading the Dr7 register while QemuFlashPtrWrite() is using the GHCB. In
general, it is necessary to protect the GHCB whenever it is used, not just
in QemuFlashPtrWrite().
Disable interrupts around the usage of the GHCB by modifying the VmgInit()
and VmgDone() interfaces:
- VmgInit() will take an extra parameter that is a pointer to a BOOLEAN
that will hold the interrupt state at the time of invocation. VmgInit()
will get and save this interrupt state before updating the GHCB.
- VmgDone() will take an extra parameter that is used to indicate whether
interrupts are to be (re)enabled. Before exiting, VmgDone() will enable
interrupts if that is requested.
Fixes: 437eb3f7a8
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Acked-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <c326a4fd78253f784b42eb317589176cf7d8592a.1604685192.git.thomas.lendacky@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3008
The original SEV-ES support missed updating the QemuFlashEraseBlock()
function to successfully erase blocks. Update QemuFlashEraseBlock() to
call the QemuFlashPtrWrite() to be able to successfully perform the
commands under SEV-ES.
Fixes: 437eb3f7a8
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <309c5317a3107bd0e650be20731842a2e1d4b59a.1604685192.git.thomas.lendacky@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3008
All fields that are set in the GHCB should have their associated bit in
the GHCB ValidBitmap field set. Add support to set the bit for the scratch
area field (SwScratch).
Fixes: 437eb3f7a8
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <cc8c8449740d2be0b287e6c69d48bf6cb067c7d8.1604685192.git.thomas.lendacky@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
The flash detection routine will attempt to determine how the flash
device behaves (e.g. ROM, RAM, Flash). But when SEV-ES is enabled and
the flash device behaves as a ROM device (meaning it is marked read-only
by the hypervisor), this check may result in an infinite nested page fault
because of the attempted write. Since the instruction cannot be emulated
when SEV-ES is enabled, the RIP is never advanced, resulting in repeated
nested page faults.
When SEV-ES is enabled, exit the flash detection early and assume that
the FD behaves as Flash. This will result in QemuFlashWrite() being called
to store EFI variables, which will also result in an infinite nested page
fault when the write is performed. In this case, update QemuFlashWrite()
to use the VMGEXIT MMIO write support to have the hypervisor perform the
write without having to emulate the instruction.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
The following flash-related base addresses:
- PcdFlashNvStorageVariableBase64,
- PcdFlashNvStorageFtwWorkingBase,
- PcdFlashNvStorageFtwSpareBase,
are always set to constant (invariable) values in the "-D SMM_REQUIRE"
build of OVMF. (That's because in the SMM build, actual pflash is a hard
requirement, and the RAM-based emulation is never available.)
Set said PCDs statically, at build. This will allow us to depend on their
values in the PEI phase.
When SMM_REQUIRE is FALSE, this change has no effect (confirmed by report
file comparison).
When SMM_REQUIRE is TRUE, the report file shows the following changes:
- "PcdOvmfFlashNvStorageFtwSpareBase" and
"PcdOvmfFlashNvStorageFtwWorkingBase" are no longer consumed by any
module directly,
- for "PcdFlashNvStorageFtwSpareBase", "PcdFlashNvStorageFtwWorkingBase"
and "PcdFlashNvStorageVariableBase64", the access method changes from
DYN to FIXED,
- for the latter PCDs, the zero (dynamic default) values are replaced with
the desired constants.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=386
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200310222739.26717-4-lersek@redhat.com>
Acked-by: Leif Lindholm <leif@nuviainc.com>
Extract the dynamic setting of the
- PcdFlashNvStorageVariableBase64
- PcdFlashNvStorageFtwWorkingBase
- PcdFlashNvStorageFtwSpareBase
addresses to a helper function.
For now, the helper function is identical (duplicated) between the SMM
flash driver and the runtime DXE flash driver. In subsequent patches, this
will change.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=386
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200310222739.26717-3-lersek@redhat.com>
Acked-by: Leif Lindholm <leif@nuviainc.com>
The only two OvmfPkg references to "PcdFlashNvStorageVariableBase" are the
spurious ones in the runtime DXE driver and the SMM driver INF files of
the QEMU flash driver. Remove these references.
The flash driver does not access "PcdOvmfFlashNvStorageEventLogBase"
either, so remove that from the INF files too.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=386
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200310222739.26717-2-lersek@redhat.com>
Acked-by: Leif Lindholm <leif@nuviainc.com>
Fix various typos in comments and documentation.
When "VbeShim.asm" is modified, we have to re-run "VbeShim.sh"
to update "VbeShim.h".
The string modified by this patch is only used when the DEBUG
macro (at the top of the file) is commented out. Since the
string is not referenced, NASM eliminates it, resulting in
the same byte array content in "VbeShim.h".
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Antoine Coeur <coeur@gmx.fr>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200207010831.9046-58-philmd@redhat.com>
In the SMM build, only an SMM driver is using the address range hence we
do not need to expose the flash MMIO range in EFI runtime mapping.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Julien Grall <julien.grall@linaro.org>
Cc: Justen Jordan L <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
The flash memory range is an IO address and should be presented as Memory
Mapped IO in EFI Runtime mapping. This information can be used by OS
when mapping the flash memory range.
It is especially helpful in SEV guest case, in which IO addresses should
be mapped as unencrypted. If memory region is not marked as MMIO then OS
maps the range as encrypted.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Julien Grall <julien.grall@linaro.org>
Cc: Justen Jordan L <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Among other things, the header file declares functions that are called
from the FVB protocol member functions in "FwBlockService.c", and defined
in "QemuFlash.c".
Both C files are listed in both "FvbServicesSmm.inf" and
"FvbServicesRuntimeDxe.inf", thus add the header file to both INF files as
well.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Michael Kinney <michael.d.kinney@intel.com>
Ref: http://mid.mail-archive.com/E92EE9817A31E24EB0585FDF735412F56327F7D3@ORSMSX113.amr.corp.intel.com
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Among other things, the header file provides (extern) declarations for the
EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL member functions that are defined in
"FwBlockService.c". This way "mFvbDeviceTemplate.FwVolBlockInstance" can
be initialized near the top of "FwBlockService.c", ahead of the member
function definitions.
"FwBlockService.c" is linked into both the DXE_SMM_DRIVER and the
DXE_RUNTIME_DRIVER builds of this module, thus list the header file in
both INF files.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Michael Kinney <michael.d.kinney@intel.com>
Ref: http://mid.mail-archive.com/E92EE9817A31E24EB0585FDF735412F56327F7D3@ORSMSX113.amr.corp.intel.com
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Commit:24e4ad7 (OvmfPkg: Add AmdSevDxe driver) added a driver which runs
early in DXE phase and clears the C-bit from NonExistent entry -- which
is later split and accommodate the flash MMIO. When SMM is enabled, we
build two sets of page tables; first page table is used when executing
code in non SMM mode (SMM-less-pgtable) and second page table is used
when we are executing code in SMM mode (SMM-pgtable).
During boot time, AmdSevDxe driver clears the C-bit from the
SMM-less-pgtable. But when SMM is enabled, Qemu Flash services are used
from SMM mode.
In this patch we explicitly clear the C-bit from Qemu flash MMIO range
before we probe the flash. When OVMF is built with SMM_REQUIRE then
call to initialize the flash services happen after the SMM-pgtable is
created and processor has served the first SMI. At this time we will
have access to the SMM-pgtable.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
[lersek@redhat.com: trivial coding style improvements]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
According to the PI spec, Volume 3,
EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL.EraseBlocks():
> The variable argument list is a list of tuples. Each tuple describes a
> range of LBAs to erase and consists of the following:
> * An EFI_LBA that indicates the starting LBA
> * A UINTN that indicates the number of blocks to erase
(NB, in edk2, EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL is a typedef to
EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL.)
In this driver, the NumOfLba local variable is defined with type UINTN,
but the TYPE argument passed to VA_ARG() is UINT32. Fix the mismatch.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Reported-by: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
These are deprecated / disabled under the
DISABLE_NEW_DEPRECATED_INTERFACES feature test macro.
Introduce a variable called PcdStatus, and use it to assert the success of
these operations (there is no reason for them to fail here).
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=166
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
When the user requires "security" by passing -D SMM_REQUIRE, and
consequently by setting PcdSmmSmramRequire, enforce flash-based variables.
Furthermore, add two ASSERT()s to catch if the wrong module were pulled
into the build.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19063 6f19259b-4bc3-4df7-8a09-765794883524
Before introducing the SMM driver interface, clean up #include directives
and [LibraryClasses] by:
- removing what's not directly used (HobLib and UefiLib),
- adding what's used but not spelled out (DevicePathLib),
- sorting the result.
This helps with seeing each source file's dependencies and with
determining the library classes for the SMM driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18672 6f19259b-4bc3-4df7-8a09-765794883524
In preparation for introducing an SMM interface to this driver, move the
following traits to separate files, so that we can replace them in the new
SMM INF file:
- Protocol installations. The SMM driver will install protocol interfaces
in the SMM protocol database, using SMM services.
- Virtual address change handler and pointer conversions. SMM drivers run
with physical mappings and pointers must not be converted.
There are further restrictions and changes for an SMM driver, but the rest
of the code either complies with those already, or will handle the changes
transparently. For example:
- SMM drivers have access to both UEFI and SMM protocols in their entry
points (see the PI spec 1.4, "1.7 SMM Driver Initialization"),
- MemoryAllocationLib has an SMM instance that serves allocation requests
with the gSmst->SmmAllocatePool() service transparently, allocating
runtime-marked SMRAM.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18671 6f19259b-4bc3-4df7-8a09-765794883524
Currently the EFI_FW_VOL_INSTANCE and ESAL_FWB_GLOBAL structures declare
the following entries as arrays, with two entries each:
- EFI_FW_VOL_INSTANCE.FvBase[2]
- ESAL_FWB_GLOBAL.FvInstance[2]
In every case, the entry at subscript zero is meant as "physical address",
while the entry at subscript one is meant as "virtual address" -- a
pointer to the same object. The virtual address entry is originally
initialized to the physical address, and then it is converted to the
virtual mapping in FvbVirtualddressChangeEvent().
Functions that (a) read the listed fields and (b) run both before and
after the virtual address change event -- since this is a runtime DXE
driver -- derive the correct array subscript by calling the
EfiGoneVirtual() function from UefiRuntimeLib.
The problem with the above infrastructure is that it's entirely
superfluous.
EfiGoneVirtual() "knows" whether EFI has gone virtual only because the
UefiRuntimeLib constructor registers the exact same kind of virtual
address change callback, and the callback flips a static variabe to TRUE,
and EfiGoneVirtual() queries that static variable.
In effect this means for QemuFlashFvbServicesRuntimeDxe: "when there is a
virtual address change, convert the entries with subscript one from
physical to virtual, and from then on use the entries with subscript one".
This would only make sense if QemuFlashFvbServicesRuntimeDxe ever needed
the original (physical) addresses (ie. the entries with subscript zero)
after the virtual address change, but that is not the case.
Replace the arrays with single elements. The subscript zero elements
simply disappear, and the single elements take the role of the prior
subscript one elements.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18670 6f19259b-4bc3-4df7-8a09-765794883524
The ESAL_FWB_GLOBAL.FvbScratchSpace array is never initialized (it
contains garbage from AllocateRuntimePool()). Its element at subscript one
(=FVB_VIRTUAL), containing garbage as well, is converted to virtual
mapping. Then the array is never used again.
Remove it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18669 6f19259b-4bc3-4df7-8a09-765794883524
The EFI_FW_VOL_INSTANCE.FvbDevLock member is initialized and then never
used. Remove it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18668 6f19259b-4bc3-4df7-8a09-765794883524
We build this driver for X64 as well -- the comment isn't overly
important, but it shouldn't be misleading.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18667 6f19259b-4bc3-4df7-8a09-765794883524
Some of the line lengths in this driver are atrocious. While we have to
put up with the status quo outside of OvmfPkg, we can at least rewrap this
driver before refactoring it.
In the FvbInitialize() function there's no way around introducing two
local variables, just for the sake of sensibly rewrapping the code.
Furthermore, in "FwBlockService.c" the function comment blocks are now
indented; their original position causes diff to print bogus function
names at the top of hunks.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18666 6f19259b-4bc3-4df7-8a09-765794883524
The current types of subexpressions used in QemuFlashPtr() are as follows.
(We also show the types of "larger" subexpressions, according to operator
binding.)
mFlashBase + (Lba * mFdBlockSize) + Offset
^ ^ ^ ^
| | | |
(UINT8*) EFI_LBA UINTN UINTN
(UINT64)
--------------------------------- ------
(UINT8*) UINTN
------------------------------------------
(UINT8*)
When building with VS2010 for Ia32 / NOOPT, the 64-by-32 bit
multiplication is translated to an intrinsic, which is not allowed in
edk2.
Recognize that "Lba" is always bounded by "mFdBlockCount" (an UINTN) here
-- all callers of QemuFlashPtr() ensure that. In addition, the flash chip
in question is always under 4GB, which is why we can address it at all on
Ia32. Narrow "Lba" to UINTN, without any loss of range.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Scott Duplichan <scott@notabs.org>
[commit message by lersek@redhat.com]
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Build-tested-by: Scott Duplichan <scott@notabs.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16384 6f19259b-4bc3-4df7-8a09-765794883524
In the InitializeVariableFvHeader() function, all three of "Offset",
"Start" and "BlockSize" have type UINTN. Therefore the (Offset /
BlockSize) and (Start / BlockSize) divisions can be compiled on all
platforms without intrinsics.
In the current expressions
(EFI_LBA) Offset / BlockSize
(EFI_LBA) Start / BlockSize
"Offset" and "Start" are cast to UINT64 (== EFI_LBA), which leads to
64-by-32 bit divisions on Ia32, breaking the VS2010 / NOOPT / Ia32 build.
The simplest way to fix them is to realize we don't need casts at all.
(The prototypes of QemuFlashEraseBlock() and QemuFlashWrite() are visible
via "QemuFlash.h", and they will easily take our UINTN quotients as
UINT64.)
Suggested-by: Scott Duplichan <scott@notabs.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Build-tested-by: Scott Duplichan <scott@notabs.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16383 6f19259b-4bc3-4df7-8a09-765794883524
The MarkMemoryRangeForRuntimeAccess() function passes the Length parameter
(of type UINT64) to the macro EFI_SIZE_TO_PAGES(). When building for the
Ia32 platform, this violates the interface contract of the macro:
[...] Passing in a parameter that is larger than UINTN may produce
unexpected results.
In addition, it trips up compilation by VS2010 for the Ia32 platform and
the NOOPT target -- it generates calls to intrinsics, which are not
allowed in edk2.
Fix both issues with the following steps:
(1) Demote the Length parameter of MarkMemoryRangeForRuntimeAccess() to
UINTN. Even a UINT32 value is plenty for representing the size of the
flash chip holding the variable store. Length parameter is used in the
following contexts:
- passed to gDS->RemoveMemorySpace() -- takes an UINT64
- passed to gDS->AddMemorySpace() -- ditto
- passed to EFI_SIZE_TO_PAGES() -- requires an UINTN. This also guarantees
that the return type of EFI_SIZE_TO_PAGES() will be UINTN, hence we can
drop the outer cast.
(2) The only caller of MarkMemoryRangeForRuntimeAccess() is
FvbInitialize(). The latter function populates the local Length variable
(passed to MarkMemoryRangeForRuntimeAccess()) from
PcdGet32(PcdOvmfFirmwareFdSize). Therefore we can simply demote the local
variable to UINTN in this function as well.
- There's only one other use of Length in FvbInitialize(): it is passed to
GetFvbInfo(). GetFvbInfo() takes an UINT64, so passing an UINTN is fine.
Suggested-by: Scott Duplichan <scott@notabs.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Build-tested-by: Scott Duplichan <scott@notabs.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16382 6f19259b-4bc3-4df7-8a09-765794883524
Lack of these braces causes build errors when -Wno-missing-braces is
absent. Spelling out more braces also helps understanding the code.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15586 6f19259b-4bc3-4df7-8a09-765794883524
When QemuFlashWrite() is asked to write a range that includes the last
byte of the LBA, then the byte that the function uses to switch the flash
device back to read mode (ROMD mode in KVM speak) actually falls out of
the LBA.
Normally this doesn't cause visible problems. However, if the variable
store and the firmware code are backed by separate flash devices, as
implemented by
[Qemu-devel] [PATCH v2] hw/i386/pc_sysfw: support two flash drives
http://thread.gmane.org/gmane.comp.emulators.qemu/243678
plus
[edk2] [edk2 PATCH] OvmfPkg: split the variable store to a separate file
http://thread.gmane.org/gmane.comp.bios.tianocore.devel/5045/focus=5046
then the READ_ARRAY_CMD not only reaches a different LBA, it reaches a
different qemu device. This results in a guest reboot soon after.
Fix this by ensuring that we always stay within the LBA just written when
issuing READ_ARRAY_CMD.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14996 6f19259b-4bc3-4df7-8a09-765794883524
PcdFlashNvStorageVariableBase64 is used to arbitrate between
QemuFlashFvbServicesRuntimeDxe and EmuVariableFvbRuntimeDxe, but even the
latter driver sets it if we fall back to it.
Allow code running later than the startup of these drivers to know about
the availability of flash variables, through a dedicated PCD.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14843 6f19259b-4bc3-4df7-8a09-765794883524
If QEMU flash is detected, this module will install
FirmwareVolumeBlock support for the QEMU flash device.
It will also set PCDs with the results that:
1. OvmfPkg/EmuVariableFvbRuntimeDxe will be disabled
2. MdeModulePkg variable services will read/write flash directly
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14839 6f19259b-4bc3-4df7-8a09-765794883524
Gerd Hoffmann
Min M Xu
Pierre Gondois
Michael Kubacki
Brijesh Singh
Tom Lendacky
Rebecca Cran
Laszlo Ersek
Antoine Coeur
Michael D Kinney
Scott Duplichan
Jordan Justen
Gao, Liming