https://bugzilla.tianocore.org/show_bug.cgi?id=2496
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2496
Reduce the build and env dependencies for the Structured PCD
application by removing the dependency on Common.lib that
is only built when BaseTools is built which does not
happen if pre-compiled BaseToools are used. Change the
makefile for the Structure PCD application to build all
files from sources which adds PcdValueCommon.c to the
makefile. Also remove PcdValueCommon.c from Common.lib.
With the change to the makefile for the Structured PCD
application, multiple C files are compiled. Only
PcdValueInit.c contains the extra information expected
by the error/warning message parser. Only parse the
DSC line number into an error message if there is an
error/warning in PcdValueInit.c. Errors/warnings in
other files should be passed through. This fixes a build
failure with no useful log information that was observed
when there was a compiler error in PcdValueCommon.c.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
The "-tc" option of the iasl compiler allows to generate a
.hex file containing a C array storing AML bytecode.
An online discussion suggested that this "-tc" option
was specific to the iasl compiler and it shouldn't be relied
on. This conversation is available at:
https://edk2.groups.io/g/devel/topic/39786201#49659
A way to address this issue is to implement a compiler
independent script that takes an AML file as input, and
generates a .hex file.
This patch implements a Python script that converts an AML
file to a .hex file, containing a C array storing AML bytecode.
This scipt has been tested with the AML output from the
following compilers supported by the EDKII implementation:
* Intel ASL compiler
* Microsoft ASL compiler
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2494
When using structured PCDs, a C application is auto generated
to fill in the structured PCD value. The C application uses
the standard include files <stdio.h>, <stdlib.h>, and <string.h>.
This C application also supports include paths from package DEC
files when a structured PCD declaration provides a <Packages>
list. The complete list of include paths are -I options for
include paths from package DEC files and the compiler's standard
include paths.
-I include paths are higher priority than the standard include
paths. If the -I included paths from package DEC files contain
<stdio.h>, <stdlib.h>, or <string.h> the wrong include files are
used to compile the C application for the structured PCD value.
Update GenerateByteArrayValue() to skip a package DEC include
paths that contain <stdio.h>, <stdlib.h>, or <string.h>.
Build failures were observed when adding a structured PCD to
CryptoPkg. CryptoPkg contains <stdio.h>, <stdlib.h>, and
<string.h> in the path CryptoPkg/Library/Include to support
building Open SSL. The Library/Include path is listed as a
private include path in CryptoPkg.dec. Without this change, the
standard include files designed to support build OpenSLL are
used to build the structured PCD C application, and that build
fails.
Other packages that provide a standard C lib or a gasket for
a subset of the standard C lib will run into this same issue
if they also define and use a Structured PCD. So this issue
is not limited to the CryptoPkg.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2451
If removing a header file from source code and file
system, the incremental build will fail.
This patch is to fix this issue by setting each header file
as a target without any actions in makefile.
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=2455
BuildOption is used by TargetTxtClassObj.py
GenFdsOption is used by GenFds.py
When the GenFds tool is used alone (e.g. python3 -m GenFds.GenFds -h)
With the OptionParser function, the first detected function
prints the help message
import TargetTxtClassObj to GenFds,
The BuildOption will be executed and replace GenFdsOption
We removed all objects associated with this problem that
were created directly during the import process
(e.g. BuildOption, BuildTarget = MyOptionParser(),
TargetTxt = TargetTxtDict())
The Patch is going to fix this issue
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=2087
In CryptHkdf.c line 42
EVP_PKEY_CTX *pHkdfCtx;
Variable pHkdfCtx begins with lower case 'p',
which should be acceptable because it it is a pointer.
(Refer to CCS_2_1_Draft, 4.3.3.3)
So ECC tool should be improved to handle issues like this.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
This issue happens under two conditions.
1. Unicode language environment in Windows
2. Python2 (Not reproducible with Python3)
Step to reproduce
C:\edk2>edksetup.bat forcerebuild
The edksetup.bat stuck at 'nmake cleanall'.
Signed-off-by: Aiden Park <aiden.park@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2311
In patch set 13c5e34a - 0c3e8e99, we implemented incremental build with
using compiler/pre-processor generate dependent header file function.
A issue is found for MSVC compiler, that the cl.exe /showIncludes
build option generate header file list to either stdout or stderr.
For .c file, the header file list is print out to stdout while for
.vfr, .aslc and .nasm file, the file list is print out to stderr.
The build tool use two threads to process the message from stdout and
stderr, but to generate correct *.deps file, build tool need to
combine the header file list from stderr and other messages from stdout
together with correct time sequence order.
So this patch is trying to combine the stdout and stderr together for
the process which is for calling make program.
The impact of this patch is that the output message of build with -q
will be changed. The compiler error message will not print out.
The build behavior of other log level setting will not be impacted.
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Steven Shi <steven.shi@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2371
This patch is to fix a regression issue that build fails
if multiple build targets given.
Two changes cause this regression issue.
One is AutoGen object __hash__ function only
hash file path and arch, missing ToolChain and build target.
The other is changing the multiple-thread-genfds function as default
build behavior. To generate the genffs command to Makefile, there
is a global data set is used, GenFdsGlobalVariable, which cause build
tool use the data of first build-target build in
the second build-target build.
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Steven Shi <steven.shi@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Redesign the binary cache and not need to save the
cache intermediate result and state in memory as a
ModuleBuildCacheIR class instance. So remove the
CacheIR.py which define the ModuleBuildCacheIR class.
Signed-off-by: Steven Shi <steven.shi@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Redesign the binary cache and bases on the compiler to
output the dependency header files info for every module.
The binary cache will directly consume the dependency header
files info and doesn't parse the C source code by iteself.
Also redesign the dependency files list format for module
and try to share the common lib hash result as more as
possible in local process. Remove the unnecessary share data
access across multiprocessing.
Signed-off-by: Steven Shi <steven.shi@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Enhance the CacheCopyFile method arg names to be more
clear and readable
Signed-off-by: Steven Shi <steven.shi@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Binary cache use the OutputFile method to return the module
built output files needed to store in cache, but current
OutputFile implementation doesn't return complete output files.
Enhance the OutputFile method to return more complete output files.
Signed-off-by: Steven Shi <steven.shi@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2311
Include dependency file in Makefile to enhance
incremental build
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Steven Shi <steven.shi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2311
Implement the function in Trim tool to get the included
file list for ASL and ASM file.
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Steven Shi <steven.shi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2304
The following statement produces a SyntaxWarning with Python 3.8:
if str(FdRegion.RegionType) is 'FILE' and self.Platform.VpdToolGuid in \
str(FdRegion.RegionDataList):
BaseTools/Source/Python/AutoGen/WorkspaceAutoGen.py:168: SyntaxWarning: \
"is" with a literal. Did you mean "=="?
Change the 'is' operator by the conventional '==' comparator.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=2400
In Dsc Parser, included dsc file is parsed always no matter
if its condition is False
gUefiOvmfPkgTokenSpaceGuid.test1|FALSE
!if gUefiOvmfPkgTokenSpaceGuid.test1 == FALSE
!include OvmfPkg/test1.dsc
!else
!include OvmfPkg/test2.dsc
!endif
The patch avoids processing redundant dsc files and improves
the way Tool handles them.
In the above case, since the conditional result is FALSE,
"test2.dsc" is not parsed.
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=2363
This patch is to fix a build tool regression issue which was introduced
by commit b8ac0b7f28.This issue caused map file lost the line of IMAGE=***.
For example,in Ovmf.map, there is no line of (IMAGE=<path to efi> ) under
each of modules item.
The path to the efi file generated by each module is written on this line
The purpose of this line is add the debug image full path.
there is no information about the module in the map file other than FVName,
it allows us to quickly know which module this part corresponds to.
In commit b8ac0b7f28,add a line ("self.BuildModules = []") in function,
but it's used to calculate the variable ModuleList in the following code.
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=2270
Currently a PCD (e.g. FeaturePCD) cannot be used in a conditional
statement in a DSC/FDF file without a module in the build referencing
the PCD package DEC file.
An example implementation that to support this is to allow a [Packages]
section in the DSC file to list additional package dependencies for PCD
references in the package DSC/FDF files.
this patch is going to add the ability to have the [packages] section
defined in the DSC file
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Acked-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2304
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Bob C Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2308
This patch is to enable MACRO for Components section architecture
modifier.
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
In order to permit the use of compilers that only implement the small
code model [which involves the use of ADRP instructions that require
4 KB segment alignment] for generating PE/COFF binaries with a small
footprint, we patch ADRP instructions into ADR instructions while doing
the ELF to PE/COFF conversion.
As it turns out, the linker may be doing the same, but for different
reasons: there is a silicon erratum #843419 for ARM Cortex-A53 which
affects ADRP instructions appearing at a certain offset in memory, and
one of the mitigations for this erratum is to patch them into ADR
instructions at link time if the symbol reference is within -/+ 1 MB.
However, the LD linker fails to update the static relocation tables, and
so we end up with an ADR instruction in the fully linked binary, but
with a relocation entry in the RELA section identifying it as an ADRP
instruction.
Since the linker has already updated the symbol reference, there is no
handling needed in GenFw for such instructions, and we can simply treat
it as an ordinary ADR. However, since it is guaranteed to be accompanied
by an add or load instruction with a LO12 relocation referencing the same
symbol, the section offset check we apply to ADR instructions is going to
take place anyway, so we can just disregard the ADR instruction entirely.
Reported-by: Eugene Cohen <eugene@hp.com>
Suggested-by: Eugene Cohen <eugene@hp.com>
Tested-by: Eugene Cohen <eugene@hp.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Liming Gao <liming.gao@intel.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2320
Add support for parseing map files generated by CLANG9 in GenFv
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1603
CLANG9 generated PE image exposes below two issues.
1. SectionSize is used to copy PE section data. It should be smaller than
section raw size.
2. The real data is required to be copied. So, copy the min size of
VirtualSize and SizeOfRawData.
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2301
This interface was a originally a no-op in python 3, and now
is fully removed causing a build warning on macOS (Darwin).
Signed-off-by: Vitaly Cheptsov <vit9696@protonmail.com>>
Acked-by: Bob Feng <bob.c.feng@intel.com>
When c/h file use macro after #include, for example,
In this case, GenMake is not able to create a healthy dependency for the c
file. GenMake used to add $(FORCE_REBUILD) dependency in the c file, this
guarantee the c file is always compiled in incremental build. But, this
function is broken since 05217d210e which
enable /MP for MSVC compiler, in order to compile multiple c files in one
command multi-processing. The fix here is adding '$(FORCE_REBUILD)' back to
retain the original function.
Line number 1728 and 978 are the code pieces which handle this logic.
Signed-off-by: Derek Lin <derek.lin2@hpe.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2221
The command used by multiple thread genffs feature in makefile
for testing if file exist is generated based on the toolchain family.
It should be based on the OS type.
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Some scripts in Source/Python were missing newlines at end of files,
so add them.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2232
Commit 0075ab2cec introduced an issue that causes an exception
when multiple workspace packages paths are specified. For example,
if edk2-platforms is used, the root directory will contain an edk
and edk2-platforms directory representing the respective
repositories.
In GenMake, the path to the package DEC file for a module is
discovered by getting the relative path of the INF to the
workspace root directory. Each directory in the relative path
is incrementally joined to the WORKSPACE directory. The file
list in the joined path is searched for a DEC file.
As an example, if the build command is used on a package outside
the edk2 repository, the INF file path is relative to the
edk2-platforms directory not edk2. This causes directory paths
to be built that do not exist. Commit 0075ab2cec replaced the
os.path.exists() call with a try except block that always fails
when os.listdir() is invoked to enumerate the list of files in
the built directory path on packages outside edk2.
This commit restores the original conditional statement which
avoids calling os.listdir() with an invalid directory path.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Michael Kubacki <michael.a.kubacki@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
The AArch64 definitions of UINT64/INT64 differ from the X64 ones.
Since this is on the tool side, doing like X64 and picking the
definitions from stdint.h feels like a better idea than hardcoding
them. So copy the pattern from X64/ProcessorBind.h.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
The range of dictionary size is set from [0,30] to [0,27].
And update the help information for this.
The previous logic for processing the parameter dict size is incorrect.
Now fix the logic.
The option "d" is added at 6b80310f34.
(https://bugzilla.tianocore.org/show_bug.cgi?id=2077)
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2216
This patch is going to fix the lib order in static_library_files.lst.
This issue is introduced by commit 673d09a2dd.
Before 673d09a2dd, build tool apply build rule for the module's library
firstly and then apply build rule for module itself. Now, build tool
apply build rule for module self and then for its library. That behavior
impact the lib order in static_library_files.lst.
This patch is to call module's LibraryAutoGenList function
explicitly, where the applying build rule action for
library is triggered.
Cc: Liming Gao <liming.gao@intel.com>
Cc: dann frazier <dann.frazier@canonical.com>
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Tested-by: dann frazier <dann.frazier@canonical.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2203
This patch is going to fix a regression issue that
build breaks when the custom makefile exist.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Steven Shi <steven.shi@intel.com>
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
As is requested in the BZ 2077, add two switches to support setting
compression mode and dictionary size.
(https://bugzilla.tianocore.org/show_bug.cgi?id=2077)
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This reverts commit bc9e4194cf.
This change causes the dependent header files are missing in Makefile.
It makes the incremental build not work. So, revert this change.
Cc: Bob Feng<bob.c.feng@Intel.com>
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Bob Feng<bob.c.feng@Intel.com>
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=2201
An error occurs using special VpdPcd that is not used in the Inf file
In dsc:
[PcdsDynamicExVpd.common.DEFAULT]
gBoardModuleTokenSpaceGuid.test1|*|{CODE({
{0x0} // terminator
})}
In dec:
[PcdsDynamicEx]
# Vpd GPIO table
gBoardModuleTokenSpaceGuid.test1|{0}|GPIO_INIT_CONFIG[]|0x50000018 {
<HeaderFiles>
Library/GpioLib.h
<Packages>
MdePkg/MdePkg.dec
}
ValueError: invalid literal for int() with base 0: '*'
This Patch is going to fix issue
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2193
The current CopyFileOnChange() method in Misc.py does not
accept the input SrcFile parameter as a dir, but the method
does not check the SrcFile is dir or not. This patch is to
add more input parameter type checking and error message output
for method CopyFileOnChange.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Signed-off-by: Steven Shi <steven.shi@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2183
This patch is going to remove rename call to reduce unnecessary
io operation so that saving build time.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2101
This patch is going to remove unnecessary calls
of os.exist()
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2102
GetDependencyList get the header file via
re.findall in the whole header file.
This patch is to pre-process the header file and
to feed the shorter string to re.findall.
This patch is to improve GetDependencyList() efficiency
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=1858
for Dict={},There are pitfalls in the way this default parameter is set
and Dict is not used in functions, other functions have these two cases,
I will change some incorrect parameter defaults
This patch is going to fix this issue
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=2188
build -p MdeModulePkg\MdeModulePkg.dsc -a IA32 -m
MdeModulePkg\Universal\PCD\Pei\Pcd.inf
Error:
AttributeError: 'PlatformInfo' object has no attribute
'DynamicPcdList'
The DSC data object used to build a separate module today
is PlatformInfo rather than PlatformAutoGen
'PlatformAutoGen' object has attribute 'DynamicPcdList'
This patch is going to fixed this issue
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2080
After checking that if the build can't
ignore Autogen due to there is no compelet autogen files,
the build tool need to do a completely Autogen.
This patch is to fix a bug that if AutoGen
can't be skiped, the SkipAutoGen flag
need to set to False
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
When building BaseTools, GNUmakefile builds create directory
BaseTools/Source/C/libs/. On the other hand, Makefile builds use libs
as an nmake pseudo target, so it either must NOT exist as a file or
directory, OR it must phony dependency like .PHONY. The latter
solution conflicts with NmakeSubdirs.py. Therefore, I make it go away
in the cleanall target. I could also add it to the clean target, but
it strikes me that cleanall should be more forceful.
Signed-off-by: Burt Silverman <burtms@gmail.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1302
This patch enable --genfds-multi-thread to default build.
This patch keep --genfds-multi-thread build option for
compatibility and also add a new build option to disable
genfds-multi-thread as --no-genfds-multi-thread.
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Sean Brogan
Kinney, Michael D
Pierre Gondois
Bob Feng
Li, Aaron
Fan, ZhijuX
Park, Aiden
Steven Shi
Philippe Mathieu-Daude
Ni, Ray
Ard Biesheuvel
Zhiguang Liu
Liming Gao
Vitaly Cheptsov via Groups.Io
Lin, Derek (HPS SW)
Leif Lindholm
Kubacki, Michael A
Zhang, Shenglei
Burt Silverman