SystemTableInfo GUID is not a Spec defined GUID.
The latest SBL and CBL produces ACPI and SMBIOS table information.
So removing the SystemTableInfo GUID implementation.
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Guo Dong <guo.dong@intel.com>
Signed-off-by: Thiyagu Kesavan Balakrishnan <thiyagux.kesavan.balakrishnan@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
This FVB module is used to initialize NV variable region
and provide SMM FVB protocol to read/write SPI variable region.
This module consume HOB gNvVariableInfoGuid and depends on
FlashDeviceLib for the actual SPI device operate.
During FVB initialization, it will initialize the variable region
if the variable region is not valid. And it support to write initial
variable data from FFS file if it is found.
Signed-off-by: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Benjamin You <benjamin.you@intel.com>
This is a common SPI Flash library used for the Intel platform that
supports SPI hardware sequence. This library provides actual SPI flash
operation via Intel PCH SPI controller.
Signed-off-by: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Benjamin You <benjamin.you@intel.com>
This module is only used for SMM S3 support for the bootloader that
doesn't support SMM.
The payload would save SMM rebase info to SMM communication area in
normal boot and expect the bootloader in S3 path to rebase the SMM
and trigger SMI by writing 0xB2 port with the given value from SMM
communication area. The payload SMM handler would get chance to
restore some registers in S3 path.
Signed-off-by: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Benjamin You <benjamin.you@intel.com>
This module consumes SMM Registers HOB (SMI_GBL_EN and SMI_APM_EN) to
install SMM control 2 protocol gEfiSmmControl2ProtocolGuid.
The protocol activate() would set SMI_GBL_EN and SMI_APM_EN and trigger
SMI by writing to IO port 0xB3 and 0xB2.
Signed-off-by: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Benjamin You <benjamin.you@intel.com>
Remove asm code used for payload entry.
Use patchable PCD instead a fixed PCD PcdPayloadStackTop to avoid
potential conflict.
Based on the removal, use same HobLib regardless UNIVERSAL_PAYLOAD.
Use same PlatformHookLib regardless UNIVERSAL_PAYLOAD. The original
PlatformHookLib was removed and UniversalPayloadPlatformHookLib was
rename to new PlatformHookLib.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Signed-off-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Add new structure for BootManagerMenuFile HOB in UefiPayloadPkg
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Guo Dong <guo.dong@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Signed-off-by: DunTan <dun.tan@intel.com>
Edk2 bootloader will pass the pei pcd database, and UPL also contain a
PCD database.
Dxe PCD driver has the assumption that the two PCD database can be
catenated and the local token number should be successive。
This patch will manually fix up the UPL PCD database to meet that
assumption.
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Guo Dong <guo.dong@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
Currently, BDS driver will link a PlatformBootManagerLib, which contains
platform specific logic. This patch get the platform specific logic from
a protocol, so that platform logic for Boot manager can be in another
binary.
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Guo Dong <guo.dong@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3100
It is not necessary to have a PEI phase in the UEFI payload since no
specific PEI task is required. This patch adds a UefiPayloadEntry
driver to get UEFI Payload required information from the bootloaders,
convert them into a HOB list, load DXE core and transfer control to it.
Here is the change details:
1) Removed PEI phase, including Peicore, BlSupportPei, SecCore, etc.
2) Added UefiPayloadEntry driver. this is the only driver before DXE core.
3) Added Pure X64 support, dropped Pure IA32 (Could add later if required)
64bit payload with 32bit entry point is still supported.
4) Use one DSC file UefiPayloadPkg.dsc to support X64 and IA32X64 build.
Removed UefiPayloadIa32.dsc and UefiPayloadIa32X64.dsc
Tested with SBL and coreboot on QEMU.
Signed-off-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Benjamin You <benjamin.you@intel.com>
CorebootModulePkg and CorebootPayloadPkg originally supports coreboot only.
In order to support other bootloaders, such as Slim Bootloader, they need
be updated to be more generic.
UEFI Payload (UefiPayloadPkg) a converged package from CorebootModulePkg
and CorebootPayloadPkg with following updates:
a. Support both coreboot and Slim Bootloader
b. Removed SataControllerDxe and BaseSerialPortLib16550 to use EDK2 modules
c. Support passing bootloader parameter to UEFI payload, e.g. coreboot
table from coreboot or HOB list from Slim Bootloader
d. Using GraphicsOutputDxe from EDK2 with minor change instead of FbGop
e. Remove the dependency to IntelFrameworkPkg and IntelFrameworkModulePkg
and QuarkSocPkg
f. Use BaseDebugLibSerialPort library as DebugLib
g. Use HPET timer, drop legacy 8254 timer support
h. Use BaseXApicX2ApicLib instead of BaseXApicLib
i. Remove HOB gUefiFrameBufferInfoGuid to use EDK2 graphics HOBs.
j. Other clean ups
On how UefiPayloadPkg could work with coreboot/Slim Bootloader, please
refer UefiPayloadPkg/BuildAndIntegrationInstructions.txt
Once UefiPayloadPkg is checked-in, CorebootModulePkg and CorebootPayloadPkg
could be retired.
Signed-off-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Kesavan Balakrishnan, ThiyaguX
Guo Dong
duntan
Zhiguang Liu