Two exceptions to this rule:
1. No access attributes specified
2. The only attribute differing is EFI_VARIABLE_APPEND_WRITE
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14552 6f19259b-4bc3-4df7-8a09-765794883524
PEI variable implementation checks only the variable header signature for validity. This does not seem robust if system crash occurred during previous Reclaim() operation. If the crash occurred while FTW was rewriting the variable FV, the signature could be valid even though the rest of the FV isn't valid.
Solution: Add a FaultTolerantWritePei driver to check and provide the FTW last write status, then PEI variable and early phase(before FTW protocol ready) of DXE variable can check the status and determine if all or partial variable data has been backed up in spare block, and then use the backed up data.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14454 6f19259b-4bc3-4df7-8a09-765794883524
Add code in BdsDxe driver to call the protocol to mark the read-only variables defined in the UEFI Spec.
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14372 6f19259b-4bc3-4df7-8a09-765794883524
set old variable to IN_DELETED_TRANSITION -> check if reclaim is needed(If yes, do reclaim) -> add new variable -> set old variable to DELETED if no reclaim happened.
to:
set old variable to IN_DELETED_TRANSITION -> check if reclaim is needed(If yes, do reclaim) -> add new variable -> set old variable to DELETED.
2. Update UpdateVariable() to correctly handle the case "both ADDED and IN_DELETED_TRANSITION variable are present", and delete both old ADDED and IN_DELETED_TRANSITION variable when deleting or updating variable.
3. Update VariableServiceGetNextVariableName() to return the valid IN_DELETED_TRANSITION variable if only IN_DELETED_TRANSITION variable is present.
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14065 6f19259b-4bc3-4df7-8a09-765794883524
2. When no DELETED variable found, no variable space could be reclaimed, so just give some debug info and return EFI_SUCCESS.
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14029 6f19259b-4bc3-4df7-8a09-765794883524
The Variable PEI and RuntimeDxe drivers were using the attribute 'HeaderLength' of
EFI_FIRMWARE_VOLUME_HEADER without checking if a Firmware Volume Header was existing at
the base address.
In case the Firmware Volume Header does not exist or is corrupted, the attribute 'HeaderLength'
is a non valid value that can lead to a non valid physical address when accessing produces an
access error.
Signed-off-by: oliviermartin
Reviewed-by: niruiyu
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12836 6f19259b-4bc3-4df7-8a09-765794883524
2. For SMM variable driver, it doesn’t need to mark the variable storage region of the FLASH as RUNTIME, so only keep it for non-SMM variable driver.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11212 6f19259b-4bc3-4df7-8a09-765794883524
The C ellipses parameters are passed to functions differently
by default with GCC 4.4. To make sure they are properly sent to
VariableGetBestLanguage, we add 'EFIAPI' to this function.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11119 6f19259b-4bc3-4df7-8a09-765794883524
1. EFI_INVALID_PARAMETER as a return value of SetVariable() to indicate it does not support this feature.
2. EFI_NOT_FOUND will be a return value of QueryVariableInfo() to indicate it does not support this feature.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10281 6f19259b-4bc3-4df7-8a09-765794883524
In UpdateVariableInfo(), the code incorrectly allocate a small memory, whose size equate with the number of Unicode name.
Should change it to be equal to the byte length of this Unicode name.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8457 6f19259b-4bc3-4df7-8a09-765794883524
2. Boot time variable reclaim issue is caused by incorrect flash layout. Platform integrator should ensure that the size of variable region must less than FTW spare space size.
3. Per UEFI Specification, variables of attribute HARDWARE_ERROR_RECORD are guaranteed to have its own storage space size.original implementation doesn’t meet this requirement
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8029 6f19259b-4bc3-4df7-8a09-765794883524
[Root Cause]
The root cause is that in FindVariable function, original code logic will traverse all variable stored in variable volatile/non-volatile area. If the non-variable area is full and Linux sets a new variable, the caller of GetNextVariablePtr will get the address of next memory block, but this block doesn't be reserved as RUNTIME attribute. Therefore its corresponding page translation table doesn't exist and causes linux kernel panic.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@7890 6f19259b-4bc3-4df7-8a09-765794883524
2. modify the method of getting right FVB protocol interface. move the notification event of FVB installation into variable driver. and also move ExitBootService event into variable driver.
3. use EFI_FVB2_WRITE_STATUS flag to distinct whether the FVB protocol supports writing operation or not.Currently, DxeCore installs FVB which has ~EFI_FVB2_WRITE_STATUS(that is, disable write) attrbiute. FvbRuntimeDxe driver should provide a full FVB protocol, which returns EFI_FVB2_WRITE_STATUS attribute to signify itself provide writable FVB protocol. So other modules which need write data by FVB protocol can locate it correctly.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@7835 6f19259b-4bc3-4df7-8a09-765794883524
2. when variable store header is invalid status, we will return EFI_VOLUME_CORRUPTED to let code assert, which is helpful to find root cause quickly.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@7804 6f19259b-4bc3-4df7-8a09-765794883524
2. move VariableFormat.h into GUID directory and change the “Signature” field of the VARIABLE_STORE_HEADER to gEfiVariableGuid value.
3. merging VARIABLE_INFO_ENTRY structure into the new Include/Guid/VariableFormat.h
4. change gEfiVariableInfoGuid into gEfiVariableGuid.
5. modify FDF files to use new guid value instead of the original signature.
6. all code related to signature is changed to use guid value.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@7728 6f19259b-4bc3-4df7-8a09-765794883524
The patch enhanced variable services to support:
1) If adding variable does not execute completely, the state is in_deleted, the next time find variable should have to retrieve the in_deleted variable.
2) when Reclaiming the variable storage, the 1) variable should be considered.
[Impaction]:
This is backward-compatible update.
[Reference Info]:
9552, 8632
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@4916 6f19259b-4bc3-4df7-8a09-765794883524
2) Add HEADER_VALID_ONLY state of variable, which represents only the header is valid and the data/name is stale. This may be caused by incomplete data updating. Adding the state helps to check whether the header is valid. If variable header is valid, then we must skip the data of variable with the valid size. If the header is invalid, we should only skip the header of variable.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@4555 6f19259b-4bc3-4df7-8a09-765794883524
2) Check the integrity of Variable header. In original implementation, if not whole header is correct, then the variable will be treat as invalid. typically, if the NameSize has been programed but the DataSize not, then the variable storage would failed to set new variable.
3) Change the Variable Header Alignment from 1 to 4 bytes on x86. It avoids the DataSize or NameSize cross two blocks. For example, in original implementation, if the NameSize crosses two block, when the FLASH manipulation is interrupted after programed HSB of NameSize and prior to program LSB of NameSize on next block, then the invalid variable header will result in the Variable Storgae broken.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@4538 6f19259b-4bc3-4df7-8a09-765794883524
Star Zeng
niruiyu
czhang46
lzeng14
oliviermartin
erictian
gdong1
jljusten
andrewfish
hhtian
mdkinney
rsun3
eric_tian
qhuang8
gikidy
lgao4
vanjeff
jji4
qwang12
yshang1
AJFISH