In commit 5b2291f956 ("OvmfPkg: QemuVideoDxe uses
MdeModulePkg/FrameBufferLib"), QemuVideoDxe was rebased to
FrameBufferBltLib.
The FrameBufferBltLib instance added in commit b1ca386074
("MdeModulePkg: Add FrameBufferBltLib library instance") logs many
messages on the VERBOSE level; for example, a normal boot with OVMF can
produce 500+ "VideoFill" messages, dependent on the progress bar, when the
VERBOSE bit is set in PcdDebugPrintErrorLevel. While FrameBufferBltLib is
certainly allowed to log such messages on the VERBOSE level, we should
separate those frequent messages from the (infrequent) ones produced by
QemuVideoDxe itself.
QemuVideoDxe logs VERBOSE messages in three locations (in two functions)
at the moment. All of them are infrequent: both QemuVideoBochsModeSetup()
and InstallVbeShim() are called from QemuVideoControllerDriverStart(),
that is, when a device is bound. Upgrade these messages to INFO level, so
that VERBOSE can be disabled in PcdDebugPrintErrorLevel -- perhaps
selectively for OvmfPkg/QemuVideoDxe -- without hiding these infrequent
messages.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Thanks to the previous patch, this field is also unnecessary now. Remove
it.
The patch is best reviewed with "git show --word-diff".
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This field is never used beyond assignment and debug-logging. Remove it.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
When setting up the list of GOP modes offered on QEMU's stdvga ("VGA") and
QXL ("qxl-vga") video devices, QemuVideoBochsModeSetup() filters those
modes against the available framebuffer size. (Refer to SVN r15288 / git
commit ec88061e.)
The VBE_DISPI_INDEX_VIDEO_MEMORY_64K register of both stdvga and QXL is
supposed to report the size of the drawable, VGA-compatibility
framebuffer. Instead, up to and including qemu-2.1, this register actually
reports the full video RAM (PCI BAR 0) size.
In case of stdvga, this happens to be correct, because on that card the
full PCI BAR 0 is usable for drawing; there is no difference between
"drawable framebuffer size" and "video RAM (PCI BAR 0) size".
However, on the QXL card, only an initial portion of the video RAM is
suitable for drawing, as compatibility framebuffer; and the value
currently reported by VBE_DISPI_INDEX_VIDEO_MEMORY_64K overshoots the
valid size. Beyond the drawable range, the video RAM contains buffers and
structures for the QXL guest-host protocol.
Luckily, the size of the drawable QXL framebuffer can also be read from a
register in the QXL ROM BAR (PCI BAR 2), so let's retrieve it from there.
Without this fix, OVMF offers too large resolutions on the QXL card (up to
the full size of the video RAM). If a GOP client selects such a resolution
and draws into the video RAM past the compatibility segment, then the
guest corrupts its communication structures (which is invalid guest
behavior).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15978 6f19259b-4bc3-4df7-8a09-765794883524
This brings the list of BOCHS video modes to par with the QEMU QXL
implementation.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15289 6f19259b-4bc3-4df7-8a09-765794883524
In the next patch we'll add many new BOCHS modes, some of which require
large frame buffers.
The size of the QXL VGA compatibility framebuffer can be changed with the
-global qxl-vga.vgamem_mb=$NUM_MB
QEMU option.
If $NUM_MB would exceed 32, then the following two QEMU options are
necessary instead:
-global qxl-vga.vgamem_mb=$NUM_MB \
-global qxl-vga.ram_size_mb=$((NUM_MB*2))
because the compatibility framebuffer can't cover more than half of PCI
BAR #0. The latter defaults to 64MB in size, and is controlled by
"ram_size_mb".
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15288 6f19259b-4bc3-4df7-8a09-765794883524
The field name "ModeNumber" in QEMU_VIDEO_MODE_DATA is misleading -- it is
not immediately obvious whether this field carries a client-visible mode
number, in the GOP sense, or an internal, card type specific mode index.
After checking all references, rename the field to "InternalModeIndex".
Also, when filling in the card type independent QEMU_VIDEO_MODE_DATA array
from the card type specific mode array, distinguish the GOP mode number
from the internal mode index in the debug message.
This patch effects no functional changes.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15287 6f19259b-4bc3-4df7-8a09-765794883524
In QemuVideoControllerDriverStart():
- remove redundant zero-initialization of:
- Private->Handle (2 locations)
- Private->GopDevicePath (when at devpath end)
- remove fields used for error handling only:
- PciAttributesSaved
- tigthen scope of temporaries:
- MmioDesc
- AcpiDeviceNode
- supplement missing error checks:
- AppendDevicePathNode() can fail with out-of-memory (2 locations)
- when installing GopDevicePath
- retval of QemuVideoGraphicsOutputConstructor() (can justifiedly fail
with out-of-resources)
- plug leaks on error:
- free GopDevicePath (AppendDevicePathNode() allocates dynamically)
- uninstall GopDevicePath
- free Private->ModeData
- call QemuVideoGraphicsOutputDestructor()
- uninstall GOP
In QemuVideoGraphicsOutputConstructor(), called by Start():
- supplement missing error checks:
- QemuVideoGraphicsOutputSetMode() retval (it can fail with
out-of-resources)
- plug leaks on error:
- free Mode->Info
- free Mode
In QemuVideoCirrusModeSetup() and QemuVideoBochsModeSetup(), both called
by Start():
- supplement missing error checks:
- AllocatePool() can fail in both
In QemuVideoGraphicsOutputDestructor(), called by Start() on the error
path:
- plug leaks:
- free Private->LineBuffer, which is allocated in
Start() -> Constructor() -> SetMode()
In QemuVideoGraphicsOutputSetMode(), called by Start() indirectly:
- remove redundant zero-assignment to:
- Private->LineBuffer
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15282 6f19259b-4bc3-4df7-8a09-765794883524
Move to a table-driven hardware detection. Add a table with PCI IDs,
card name and variant enum. Use the table for hardware detection and
initialization. Rename Cirrus-specific data and code to carry "cirrus"
in the name.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13967 6f19259b-4bc3-4df7-8a09-765794883524
This driver provides a UEFI Graphics Output Protocol (GOP) driver
for the QEMU Cirrus VGA hardware. It enables 24-bit color,
and uses the standard 32-bit GOP pixel format whenever possible.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11524 6f19259b-4bc3-4df7-8a09-765794883524
Laszlo Ersek
jljusten