Update DebugAgent to make sure the Local APIC SoftwareEnable bit is set
before using the Local APIC Timer.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18712 6f19259b-4bc3-4df7-8a09-765794883524
The LocalApicLib does not provide a function to manage the state of the
Local APIC SoftwareEnable bit in the Spurious Vector register. There
are cases where this bit needs to be managed without side effects to.
other Local APIC registers. One use case is in the DebugAgent in the
SourceLevelDebugPkg.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18711 6f19259b-4bc3-4df7-8a09-765794883524
The PiSmmCpuDxeSmm module makes some assumptions about GDT selectors
that are based on the GDT layout from the DxeIplPeim. For example,
the protected mode entry code and (where appropriate) the long mode
entry code in the UefiCpuPkg/PiSmmCpuDxeSmm/*/MpFuncs.* assembly
files, which are used during S3 resume, open-code segment selector
values that depend on DxeIplPeim's GDT layout.
This updates the CpuDxe module to use the same GDT layout as the
DxeIplPeim. This enables modules that are dispatched after
CpuDxe to find, and potentially save and restore, a GDT layout that
matches that of DxeIplPeim. The DxeIplPeim has a 2 GDT entries for
data selectors that are identical. These are LINEAR_SEL (GDT Offset
0x08)and LINEAR_DATA64_SEL (GDT offset 0x30). LINEAL_SEL is used for
for IA32 DXE and the LINEAR_DATA64_SEL is used for X64 DXE. This
duplicate data selector was added to the CpuDxe module to keep the
GDT and all selectors consistent.
Using a consistent GDT also improves debug experience.
Reported-by: Laszlo Ersek <lersek@redhat.com>
Analyzed-by: Laszlo Ersek <lersek@redhat.com>
Link: http://article.gmane.org/gmane.comp.bios.edk2.devel/3568
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18710 6f19259b-4bc3-4df7-8a09-765794883524
Putting these on the command line as we do at the moment means that they
are *only* visible when actually building the OpenSSL code itself. When
building other things like BaseCryptLib, they were missing. Which could
lead to discrepancies in structures defined by the header files, between
the OpenSSL code and the EDK II code which calls it.
Move the definitions into opensslconf.h where they would normally live
in a standard build of OpenSSL.
Note: Do *not* set OPENSSL_NO_LHASH or OPENSSL_NO_OCSP since those weren't
effectively disabled before; the directories was still being included in
the build. If we actually disable then, the build breaks. We can hopefully
fix at least OCSP upstream later, but one thing at a time...
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Reviewed-by: Qin Long <qin.long@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18708 6f19259b-4bc3-4df7-8a09-765794883524
OpenSSL ought to work this out for itself when OPENSSL_SYS_UEFI is set.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Reviewed-by: Qin Long <qin.long@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18707 6f19259b-4bc3-4df7-8a09-765794883524
We were manually setting -DSIXTY_FOUR_BIT_LONG or -DTHIRTY_TWO_BIT on
the compiler command line when building OpensslLib itself, but not when
building BaseCryptLib.
But when building BaseCryptLib, we weren't setting OPENSSL_SYS_UEFI
*either*. This meant that *that* build was picking up the definition
from <openssl/opensslconf.h>, and was thus *different* to the version
the library was built with, in some cases.
So set OPENSSL_SYS_UEFI consistently in OpensslSupport.h and *also*
define either SIXTY_FOUR_BIT or THIRTY_TWO_BIT there too.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Qin Long <qin.long@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18706 6f19259b-4bc3-4df7-8a09-765794883524
Instead of patching OpenSSL to add EFIAPI to the one varargs function we
actually *noticed* breakage in, let's fix the problem in a more coherent
way by undefining NO_BUILTIN_VA_FUNCS.
That way, the VA_START and similar macros will actually do the right
thing for non-EFIAPI functions, which is to use the GCC builtins.
It's still fairly broken elsewhere in the tree, with the VA_START macro
being used from both EFIAPI and non-EFIAPI functions — and being broken
in the latter case. We probably ought to make EFIAPI a no-op everywhere
and add -mabi=ms to the GCC builds. But that's a project for another day.
For now, just fix the OpenSSL build in a cleaner fashion.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Qin Long <qin.long@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18705 6f19259b-4bc3-4df7-8a09-765794883524
Since OpenSSL 1.0.2 we can set this flag on the X509_STORE to instruct
OpenSSL to accept non-self-signed certificates as trusted. So we don't
need two entirely identical copies of a verify_cb() function which makes
it ignore the resulting errors.
We also *didn't* use that verify_cb() function for X509VerifyCert(), but
probably should have done. So that can get X509_V_FLAG_PARTIAL_CHAIN for
consistency, too.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Reviewed-by: Qin Long <qin.long@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18703 6f19259b-4bc3-4df7-8a09-765794883524
Use the new OBJ_get0_data() accessor to compare the data, and actually
check the length of the object too.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Qin Long <qin.long@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18702 6f19259b-4bc3-4df7-8a09-765794883524
OpenSSL 1.1 introduces new OBJ_get0_data() and OBJ_length() accessor
functions and makes ASN1_OBJECT an opaque type.
Unlike the accessors in previous commits which *did* actually exist
already but just weren't mandatory, these don't exist in older versions
of OpenSSL. So introduce macros which do the right thing, for
compatibility.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Qin Long <qin.long@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18701 6f19259b-4bc3-4df7-8a09-765794883524
In OpenSSL 1.1, the X509_ATTRIBUTE becomes an opaque structure and we will
no longer get away with accessing its members directly. Use the accessor
functions X509_ATTRIBUTE_get0_object0() and X509_ATTRIBUTE_get0_type()
instead.
Also be slightly more defensive about unlikely failure modes.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Qin Long <qin.long@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18700 6f19259b-4bc3-4df7-8a09-765794883524
In OpenSSL 1.1, the X509_NAME becomes an opaque structure and we will no
longer get away with accessing its members directly. Use i2d_X509_NAME()
instead.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Qin Long <qin.long@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18699 6f19259b-4bc3-4df7-8a09-765794883524
OpenSSL 1.1 has cleaned up its include files a little, and it will now
be necessary to directly include things like <openssl/bn.h> if we want
to use them, rather than assuming they are included indirectly from
other headers.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Qin Long <qin.long@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18698 6f19259b-4bc3-4df7-8a09-765794883524
The EFIAPI function declaration is missing for several functions in the
EmbeddedPkg/Ebl directory. A few function pointer struct members expect
EFIAPI though and GCC46/X64 will fail to compile the directory without
them.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Thomas Palmer <thomas.palmer@hpe.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18697 6f19259b-4bc3-4df7-8a09-765794883524
Add a check for ResourcePaddingDescriptors being a valid pointer in
DumpPpbPaddingResource() to prevent looping on memory not owned by
PciBusDxe. The ResourcePaddingDescriptors is initialized to NULL
when the PCI_IO_DEVICE structure is allocated and remains NULL if
no PCI hot plug controllers are present. This issue is only
observed when DEBUG_CODE() macros are enabled and was introduced
by the following patch:
[edk2] [Patch] MdeModulePkg: Fix a PciBusDxe hot plug bug
SVN revsion 18658
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Kinney Michael <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18696 6f19259b-4bc3-4df7-8a09-765794883524
1. Correct the return comments of entrypoint function.
2. Add parameters' comments for MeasureSmbiosTable().
3. Correct the Protocols and Guids usage comments in SmbiosMeasurementDxe.inf.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18695 6f19259b-4bc3-4df7-8a09-765794883524
Use EFI_D_VERBOSE instead of EFI_D_INFO in InternalDumpData() and InternalDumpHex().
And also add DEBUG_CODE wrapper to InternalDumpHex() call.
It is to avoid the bother from the internal verbose debug information.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18693 6f19259b-4bc3-4df7-8a09-765794883524
1. Smbios3Table used as SmbiosTable wrongly after SmbiosTable got from configuration table.
2. Use correct VendorGuid and VendorTable to measure.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18691 6f19259b-4bc3-4df7-8a09-765794883524
Add support for the reading and writing MSR_SMM_FEATURE_CONTROL
through the SmmCpuFeaturesIsSmmRegisterSupported(),
SmmCpuFeaturesGetSmmRegister(), and SmmCpuFeaturesSetSmmRegister()
functions. This MSR is supported if the Family/Model is 06_3C,
06_45, or 06_46.
Cc: "Yao, Jiewen" <jiewen.yao@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: "Yao, Jiewen" <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18690 6f19259b-4bc3-4df7-8a09-765794883524
This change is triggered by R18654 "Enhance variable performance by reading from existed memory cache"
that changed the code to use CacheVariable to improve performance.
So the CacheVariable->InDeletedTransitionPtr NULL pointer check needs to be moved to the place before
it is been used.
Cc: Shumin Qiu <shumin.qiu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Shumin Qiu <shumin.qiu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18688 6f19259b-4bc3-4df7-8a09-765794883524
because most platforms use such logic.
PcdDataBaseHobGuid GuidHob is excluded because PCD database in FSP is different with the one in PEI.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Ma, Maurice" <maurice.ma@intel.com>
Reviewed-by: "Rangarajan, Ravi P" <ravi.p.rangarajan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18687 6f19259b-4bc3-4df7-8a09-765794883524
PcdSet## has no error status returned, then the caller has no idea about
whether the set operation is successful or not. PcdSet##S were added to
return error status and PcdSet## APIs were put in ifndef
DISABLE_NEW_DEPRECATED_INTERFACES condition. To adopt PcdSet##S and
further code development with DISABLE_NEW_DEPRECATED_INTERFACES defined,
we need to Replace PcdSet## usage with PcdSet##S.
Normally, DynamicDefault PCD set is expected to be success, but DynamicHii
PCD set failure is a legal case. So for DynamicDefault, we add assert
when set failure. For DynamicHii, we add logic to handle it.
Cc: "Yao, Jiewen" <jiewen.yao@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18686 6f19259b-4bc3-4df7-8a09-765794883524
Fix the wrong return value of both InternalSyncIncrement()
and InternalSyncDecrement(). The return value shouldn't
be the address of input parameter. It should be the updated
value of input parameter instead.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18685 6f19259b-4bc3-4df7-8a09-765794883524
This function is mainly through the Hii handle to get the formset opcode.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18684 6f19259b-4bc3-4df7-8a09-765794883524
update some smbios string and macro name for MinnowBoard
Turbot board.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tim He <tim.he@intel.com>
Reviewed-by: David Wei <david.wei@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18682 6f19259b-4bc3-4df7-8a09-765794883524
The SendForm function can be called nest in it. This function also uses some global variables. So we must save global variable values before it been called again.
Checked in the missing change for gBrowserFormSetList.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18681 6f19259b-4bc3-4df7-8a09-765794883524
This is patch to add smbios measurement.
The problem of current SMBIOS measurement is:
1) TCG drivers do not support SMBIOS3.0 table.
2) TCG drivers do not follow TCG platform spec on: "Platform configuration information that is automatically updated,
such as clock registers, and system unique information, such as asset numbers or serial numbers,
MUST NOT be measured into PCR [1], or any other PCR."
So we decide to move Smbios measurement from TCG drivers to Smbios driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Zeng, Star" <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18680 6f19259b-4bc3-4df7-8a09-765794883524
We do not consider microcode not found as critical error, because Microcode might be applied later.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Ma, Maurice" <maurice.ma@intel.com>
Reviewed-by: "Rangarajan, Ravi P" <ravi.p.rangarajan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18678 6f19259b-4bc3-4df7-8a09-765794883524
This is patch to remove smbios measurement in TCG driver. There will be other patch to add it in Smbios driver.
The problem of current SMBIOS measurement is:
1) TCG drivers do not support SMBIOS3.0 table.
2) TCG drivers do not follow TCG platform spec on: "Platform configuration information that is automatically updated,
such as clock registers, and system unique information, such as asset numbers or serial numbers,
MUST NOT be measured into PCR [1], or any other PCR."
So we decide to move Smbios measurement from TCG drivers to Smbios driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Zhang, Chao B" <chao.b.zhang@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18677 6f19259b-4bc3-4df7-8a09-765794883524
Previous TCG2 configuration UI always add all TCG defined hash algorithm to let user select which one need be used.
This brings risk that user might select unsupported hash, and selection is rejected later.
So we enhance to UI to hide unsupported hash algorithm.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Zhang, Chao B" <chao.b.zhang@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18676 6f19259b-4bc3-4df7-8a09-765794883524
when the absolute path is given to '-f', it would create some redundant
empty directories.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18675 6f19259b-4bc3-4df7-8a09-765794883524
So that other module can also refer to them.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Zeng, Star" <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18674 6f19259b-4bc3-4df7-8a09-765794883524
The PiSmmCpuDxeSmm module does not use any services from the SmmLib.
This change removes the SmmLib from PiSmmCpuDxeSmm module and also
removes the lib mapping in the UefiCpuPkg DSC file because no other
modules in the UefiCpuPkg use the SmmLib.
Removal of SmmLib is now possible because the only API call to it,
ClearSmi(), was ultimately removed from PiSmmCpuDxeSmm -- see the
"BUGBUG" comment in git commit 529a5a86.
Cc: "Yao, Jiewen" <jiewen.yao@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: "Yao, Jiewen" <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18673 6f19259b-4bc3-4df7-8a09-765794883524
Before introducing the SMM driver interface, clean up #include directives
and [LibraryClasses] by:
- removing what's not directly used (HobLib and UefiLib),
- adding what's used but not spelled out (DevicePathLib),
- sorting the result.
This helps with seeing each source file's dependencies and with
determining the library classes for the SMM driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18672 6f19259b-4bc3-4df7-8a09-765794883524
In preparation for introducing an SMM interface to this driver, move the
following traits to separate files, so that we can replace them in the new
SMM INF file:
- Protocol installations. The SMM driver will install protocol interfaces
in the SMM protocol database, using SMM services.
- Virtual address change handler and pointer conversions. SMM drivers run
with physical mappings and pointers must not be converted.
There are further restrictions and changes for an SMM driver, but the rest
of the code either complies with those already, or will handle the changes
transparently. For example:
- SMM drivers have access to both UEFI and SMM protocols in their entry
points (see the PI spec 1.4, "1.7 SMM Driver Initialization"),
- MemoryAllocationLib has an SMM instance that serves allocation requests
with the gSmst->SmmAllocatePool() service transparently, allocating
runtime-marked SMRAM.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18671 6f19259b-4bc3-4df7-8a09-765794883524
Currently the EFI_FW_VOL_INSTANCE and ESAL_FWB_GLOBAL structures declare
the following entries as arrays, with two entries each:
- EFI_FW_VOL_INSTANCE.FvBase[2]
- ESAL_FWB_GLOBAL.FvInstance[2]
In every case, the entry at subscript zero is meant as "physical address",
while the entry at subscript one is meant as "virtual address" -- a
pointer to the same object. The virtual address entry is originally
initialized to the physical address, and then it is converted to the
virtual mapping in FvbVirtualddressChangeEvent().
Functions that (a) read the listed fields and (b) run both before and
after the virtual address change event -- since this is a runtime DXE
driver -- derive the correct array subscript by calling the
EfiGoneVirtual() function from UefiRuntimeLib.
The problem with the above infrastructure is that it's entirely
superfluous.
EfiGoneVirtual() "knows" whether EFI has gone virtual only because the
UefiRuntimeLib constructor registers the exact same kind of virtual
address change callback, and the callback flips a static variabe to TRUE,
and EfiGoneVirtual() queries that static variable.
In effect this means for QemuFlashFvbServicesRuntimeDxe: "when there is a
virtual address change, convert the entries with subscript one from
physical to virtual, and from then on use the entries with subscript one".
This would only make sense if QemuFlashFvbServicesRuntimeDxe ever needed
the original (physical) addresses (ie. the entries with subscript zero)
after the virtual address change, but that is not the case.
Replace the arrays with single elements. The subscript zero elements
simply disappear, and the single elements take the role of the prior
subscript one elements.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18670 6f19259b-4bc3-4df7-8a09-765794883524
The ESAL_FWB_GLOBAL.FvbScratchSpace array is never initialized (it
contains garbage from AllocateRuntimePool()). Its element at subscript one
(=FVB_VIRTUAL), containing garbage as well, is converted to virtual
mapping. Then the array is never used again.
Remove it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18669 6f19259b-4bc3-4df7-8a09-765794883524
The EFI_FW_VOL_INSTANCE.FvbDevLock member is initialized and then never
used. Remove it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18668 6f19259b-4bc3-4df7-8a09-765794883524
We build this driver for X64 as well -- the comment isn't overly
important, but it shouldn't be misleading.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18667 6f19259b-4bc3-4df7-8a09-765794883524
Some of the line lengths in this driver are atrocious. While we have to
put up with the status quo outside of OvmfPkg, we can at least rewrap this
driver before refactoring it.
In the FvbInitialize() function there's no way around introducing two
local variables, just for the sake of sensibly rewrapping the code.
Furthermore, in "FwBlockService.c" the function comment blocks are now
indented; their original position causes diff to print bogus function
names at the top of hunks.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18666 6f19259b-4bc3-4df7-8a09-765794883524
1. Add a new function 'RunShellCommand' to return command status, thus 'EfiShellExecute' can get the command return status of 'CommandLine'.
2. Refine the code logic of 'EfiShellExecute' to make the new image of shell be loaded only if 'Environment' isn't NULL.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Signed-off-by: Jin Eric <eric.jin@intel.com>
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18664 6f19259b-4bc3-4df7-8a09-765794883524
Add new added MultipleWorkspace.py in the common dependency to freeze
python tools for Windows.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18663 6f19259b-4bc3-4df7-8a09-765794883524
Make the BmFindLoadOption function public
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Sunny Wang <sunnywang@hpe.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18662 6f19259b-4bc3-4df7-8a09-765794883524
Michael Kinney
Nagaraj Hegde
David Woodhouse
Thomas Palmer
Ruiyu Ni
Star Zeng
Qiu Shumin
Yao, Jiewen
Haojian Zhuang
Dandan Bi
Tim He
Eric Dong
Yonghong Zhu
Laszlo Ersek
Liming Gao
Sunny Wang