This patch is to consume the PcdCpuSmmApSyncTimeout2 to
enhance the flexibility of timeout configuration.
In some cases, certain processors may not be able to enter
SMI, and prolonged waiting could lead to kernel soft/hard
lockup. We have now defined two timeouts. The first timeout
can be set to a smaller value to reduce the waiting period.
Processors that are unable to enter SMI will be woken up
through SMIIPL to enter SMI, followed by a second waiting
period. The second timeout can be set to a larger value to
prevent delays in processors entering SMI case due to the
long instruction execution.
This patch adjust the location of PcdCpuSmmApSyncTimeout2
to avoid conflict.
Signed-off-by: Yanbo Huang <yanbo.huang@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
This reverts commit cb3134612d.
Intel server platform sync this commit will hit conflict since our code base is old.
We don't want to cherry-pick the dependent patches to avoid potential issue.
We need to revert this commit first and then fix the conflict and reapply the change.
Sorry for the incovenience.
Signed-off-by: Yanbo Huang <yanbo.huang@intel.com>
MMIO ranges within the mProtectionMemRange array may exceed 4G
and should be configured as 'Present & NX'. However, the initial
attribute for these MMIO addresses in the page table is
'non-present'. Other attributes should not be set or updated for
a non-present range if the present bit mask is zero, as this could
result in an error during the InitPaging for the page table update
process.
This patch is to resolve the error to make sure MMIO page table
can be configured correctly.
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
CONFIDENTIAL_COMPUTING_GUEST_ATTR is not a simple SEV level anymore
and includes a feature mask since the previous commit.
Fix AmdMemEncryptionAttrCheck to check the level and feature
correctly and add DebugVirtualization support.
Since the actual feature flag is not set yet, this should cause
no behavioural change.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
---
Changes:
v5:
* "rb" from Tom
On the LoongArch platform:
the a0 register can be used as both a function parameter and a return value.
Due to parameter EFI_SYSTEM_CONTEXT being overwritten by an invalid context address,
when calling GetExceptionType, incorrect parameter address causes memory access exception.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4796
Cc: Chao Li <lichao@loongson.cn>
Signed-off-by: Dongyan Qian <qiandongyan@loongson.cn>
This patch fixes an error in calculating cache sizes for cores from
different Dies. The original code incorrectly cleared cache sizes for
different core types during intermediate calculation steps, leading to
mistakes in counting duplicate entries. This patch adds a check for
cache size to distinguish between different cache types.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: xieyuanh <yuanhao.xie@intel.com>
Update reference to SevSnpMsr.h as part of a refactor of MSR definitions and
SEV-SNP related defines. Remove family-specific references (filename) as these
defines are common to all modern EPYC Processors.
Signed-off-by: Paul Grimes <paul.grimes@amd.com>
Declares in the .inf file that the current component is an MM_STANDALONE
Signed-off-by: Yuanhao Xie <yuanhao.xie@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
PcdCpuSmmApSyncTimeout is not only used by BSP to wait AP,
but also for AP to wait BSP (APHandler).
This patch is only to refine the PCD comment. No function
impact.
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
This patch is to consume the PcdCpuSmmApSyncTimeout2 to
enhance the flexibility of timeout configuration.
In some cases, certain processors may not be able to enter
SMI, and prolonged waiting could lead to kernel soft/hard
lockup. We have now defined two timeouts. The first timeout
can be set to a smaller value to reduce the waiting period.
Processors that are unable to enter SMI will be woken up
through SMIIPL to enter SMI, followed by a second waiting
period. The second timeout can be set to a larger value to
prevent delays in processors entering SMI case due to the
long instruction execution.
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Provide the capability for platform to specifies the 2nd
timeout value in microseconds for the BSP/AP in SMM to wait for
one another to enter SMM.
The added interface can enhance the flexibility of timeout
configuration. In some cases, certain processors may not be
able to enter SMI, and prolonged waiting could lead to
kernel soft/hard lockup. We have now defined two timeouts.
The first timeout can be set to a smaller value to reduce
the waiting period. Processors that are unable to enter SMI
will be woken up through SMIIPL to enter SMI, followed by
a second waiting period. The second timeout can be set to a
larger value to prevent delays in processors entering SMI
case due to the long instruction execution.
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
This patch is to fix issue when splitting leaf paging
entry in CpuPageTableLib code.
In previous code, before we assign the new child paging
structure address to the content of splitted paging entry,
PageTableLibSetPnle() is called to make sure the bit7 is
set to 0, which indicate the previous leaf entry is
changed to non-leaf entry now. There is a gap between
we change the bit7 and we assign the new child paging
structure address to the content of the splitted paging
entry. If the address of code execution or data access
happens to be in the range covered by the splitted paging
entry, this gap may cause issue.
In this patch, we prepare the new paging entry content
value in a local variable and assign the value to the
splitted paging entry at once. The volatile keyword
is used to ensure that no optimization will occur in
compilation.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Zhou Jianfeng <jianfeng.zhou@intel.com>
Remove GetAcpiCpuData() in CpuS3.c. The mAcpiCpuData
is not needed in S3 boot anymore.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Remove the unneeded assignment of MpService2Ppi field
in SmmS3ResumeState. Previously, when the execution
combination of PEI and DXE are the same, the pointer
of mpservice ppi will be passed to CpuS3.c in smm cpu
driver to wakeup all APs, instead of init-sipi-sipi.
Currently, CpuS3.c doesn't need to wakeup Aps anymore.
So remove the duplicated mpservice locate and assignment
to MpService2Ppi field in SmmS3ResumeState.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
After the code to load mtrr setting, set register table,
handle APIC setting and Interrupt after INIT-SIPI-SIPI
is moved, the InitializeCpuProcedure() only contains
following code logic:
1.Bsp runs ExecuteFirstSmiInit().
2.Bsp transfers AP to safe hlt-loop
During S3 boot, since APs will be relocated to new safe
buffer by the callback of gEdkiiEndOfS3ResumeGuid in
PeiMpLib, Bsp doesn't need to transfer AP to safe hlt-loop
any more. SmmRestoreCpu() in CpuS3 only needs to runs the
ExecuteFirstSmiInit() on BSP. So remove code to wakeup
AP by INIT-SIPI-SIPI and remove code to relocate ap to
safe hlt-loop.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Remove ProgramVirtualWireMode()/DisableLvtInterrupts()
since APs won't be waken by INIT-SIPI-SIPI in CpuS3.c
any more. The two functions has been executed in
MpInitLibInitialize() in PeiMplib.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
In this commit, change PeiMpLib to install callback
of gEdkiiEndOfS3ResumeGuid to relocate AP to new safe
buffer. The gEdkiiEndOfS3ResumeGuid is installed in
S3Resume.c before jmping to OS waking vector.
Previously, code in CpuS3.c of PiSmmCpuDxe driver will
prepare the new safe buffer for AP and place AP in hlt
loop state. With this code change, we can remove the
Machine Instructions of mApHltLoopCode in PiSmmCpuDxe.
Also we can reuse the related code in DxeMpLib for
PeiMpLib.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Install gEdkiiEndOfS3ResumeGuid in S3Resume to trigger
callback registered by PeiMpLib. The callback is to
relocate Ap to new safe memory before jump to OS waking
vector in S3 boot flow.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Move some code in DxeMpLib.C to common MpLib.c.
The related code is to relocate Ap to new safe buffer
before booting into OS. In next commits, these code
also will be used by PeiMpLib. This commit doesn't
change any code functionality.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Abstract some DxeMpLib code to function in this commit.
Some of these internal functions will be moved to common
MpLib.c in following commits. Then PeiMpLib can reuse
the code.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Disable paging in IA32 RelocateApLoop assembly
code to fix the issue that the AP page table is
unavailiable after boot OS under IA32 execution mode.
This issue exist in IA32 PEI + IA32 DXE normal boot
(also S3 boot with IA32 PEI after previous three commits
are accepted). In current MpLib code, the IA32 execution
mode code did not create page table in reserved memory
like what X64 code did. If PcdCpuStackGuard is TRUE, the
PG is enabled for AP in current RelocateApLoop assembly
code. And the page table for AP is unavailiable after
boot OS. This might cause potential issue. So disable PG
in IA32 RelocateApLoop.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Remove code to set register table in CpuS3.c.
In previous commit, PcdCpuFeaturesInitOnS3Resume
has been set to TRUE. So that CpuFeaturesPei PEIM
will initialize the CPU registers and perform CPU
features initialization.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Set PcdCpuFeaturesInitOnS3Resume to TRUE. So that
CpuFeaturesPei PEIM will initialize the CPU registers
and perform CPU features initialization.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Remove code to load mtrr setting in CpuS3.c.
In previous commits, before transferring to
CpuS3.c, MTRR setting has been loaded in
S3RestoreConfig2() for all CPU.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
In this commit, S3Resume.c wakeup all Aps to run
LoadMtrrData for all cpu before transfer to CpuS3.c
in smm cpu driver. The MtrrSetting table can be restored
by gEdkiiS3MtrrSettingGuid which is saved by lockbox in
PEI phase. This can avoid waking up APs in CpuS3.c.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Save MTRR by lockbox in CpuS3DataDxe. In S3 boot,
The MTRR setting will be restored in S3Resume.c
in following patches. Then S3Resume.c will wakeup
all APs to load the MTRR setting. This can avoid
waking up APs in CpuS3.c.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Add locbox lib instance in DSC. The SmmLockBoxDxeLib
will be consumed by CpuS3DataDxe driver
Signed-off-by: Dun Tan <dun.tan@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4778
MPInitlib have wrong expectation that BSP index should always be 0 in
MpInitLibInitialize(), SwitchBsp(),ApWakeupFunction().
That will cause the data mismatch, if the initial BSP is not 0.
Reviewed-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Ning Feng <ning.feng@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Intel has some features need to use processor extended
information under CPU feature InitializeFunc(), so add code
to support it: This patch is to add CPU_V2_EXTENDED_TOPOLOGY
to get processor extended info.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zeng Star <star.zeng@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
This patch is to remove legacy SmBase relocation in
PiSmmCpuDxeSmm Driver. The responsibility for SmBase
relocation has been transferred to the SmmRelocationInit
interface, which now handles the following tasks:
1. Relocates the SmBase for each processor.
2. Generates the gSmmBaseHobGuid HOB.
As a result of this change, the PiSmmCpuDxeSmm driver's
role in SMM environment setup is simplified to:
1. Utilize the gSmmBaseHobGuid to determine the SmBase.
2. Perform the ExecuteFirstSmiInit() to do early SMM
initialization.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zeng Star <star.zeng@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Due to the definition difference of SMRAM Save State,
SmmBase config in SMRAM Save State for AMD is also different.
This patch provides the AmdSmmRelocationLib library instance
to handle the SMRAM Save State difference.
Cc: Abdul Lateef Attar <AbdulLateef.Attar@amd.com>
Cc: Abner Chang <abner.chang@amd.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zeng Star <star.zeng@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Acked-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Abdul Lateef Attar <AbdulLateef.Attar@amd.com>
This patch is to remove unnecessary CpuIndex.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zeng Star <star.zeng@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
This patch aims on mProcessorInfo global variable, which can be
defined as local variable in SmmRelocateBases(). With this patch,
no need to allocate the memory for all CPUs to store the
Processor Info.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zeng Star <star.zeng@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Since SMM relocation is performed serially for each CPU, there is
no need to allocate buffers for all CPUs to store the SmBase
address in mSmBase and the Rebased flag in mRebased. A defined
global variable is sufficient.
This patch focuses on the mSmBase and mRebased global variables
to prevent unnecessary memory allocation for these variables.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zeng Star <star.zeng@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
This patch aims to rename global variables for clearer
association with Smm Init, ensuring their names are
distinct from those used in the PiSmmCpuDxeSmm Driver.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zeng Star <star.zeng@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
This patch just separates the smbase relocation logic from
PiSmmCpuDxeSmm driver, and moves to the SmmRelocationInit
interface. It maintains the original implementation of most
functions and leaves the definitions of global variables
intact. Further refinements to the code are planned for
subsequent patches.
Platform shall consume the interface for the smbase
relocation if need SMM support.
Note:
Before using SmmRelocationLib, the PiSmmCpuDxeSmm driver
allocates the SMRAM to be used for SMI handler and Save
state area of each processor from Smst->AllocatePages().
With SmmRelocationLib, the SMRAM allocation for SMI
handlers and Save state areas is moved to early PEI
phase (Smst->AllocatePages() service is not available).
So, the allocation is done by splitting the SMRAM out of
the SMRAM regions reported from gEfiSmmSMramMemoryGuid.
So, Platform must produce the gEfiSmmSMramMemoryGuid HOB
for SmmRelocationLib usage.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zeng Star <star.zeng@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Intel plans to separate the smbase relocation logic from
PiSmmCpuDxeSmm driver, and the related behavior will be
moved to the new interface defined by the SmmRelocationLib
class.
The SmmRelocationLib class provides the SmmRelocationInit()
interface for platform to do the smbase relocation, which
shall provide below 2 functionalities:
1. Relocate smbases for each processor.
2. Create the gSmmBaseHobGuid HOB.
With SmmRelocationLib, PiSmmCpuDxeSmm driver (which runs at
a later phase) shall:
1. Consume the gSmmBaseHobGuid HOB for the relocated smbases
for each Processor.
2. Execute the early SMM Init.
This patch just provides the SmmRelocationLib class.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zeng Star <star.zeng@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
If gMpInformation2HobGuid HOB is NULL,
then fall back to an older way of collecting
CPU information from the MP services library.
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Abdul Lateef Attar <AbdulLateef.Attar@amd.com>
ProcessorNumber 0 is not always BSP. Debug message based on 0
of ProcessorNumber is incorrect.
This patch is to clean the debug message in LmceSupport
directly.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zeng Star <star.zeng@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Zeng Star <star.zeng@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4654
When running under an SVSM, the VMPL level of the APs that are started
must match the VMPL level provided by the SVSM. Additionally, each AP
must have a Calling Area for use with the SVSM protocol. Update the AP
creation to properly support running under an SVSM.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Acked-by: Ray Ni <ray.ni@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4654
The RMPADJUST instruction is used to change the VMSA attribute of a page,
but the VMSA attribute can only be changed when running at VMPL0. To
prepare for running at a less priviledged VMPL, use the AmdSvsmLib library
API to perform the RMPADJUST. The AmdSvsmLib library will perform the
proper operation on behalf of the caller.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Ray Ni <ray.ni@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4654
In order to support an SEV-SNP guest running under an SVSM at VMPL1 or
lower, a new library must be created.
This library includes an interface to detect if running under an SVSM, an
interface to return the current VMPL, an interface to perform memory
validation and an interface to set or clear the attribute that allows a
page to be used as a VMSA.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Ray Ni <ray.ni@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4654
Currently, the first time an AP is started for an SEV-SNP guest, it relies
on the VMSA as set by the hypervisor. If the list of APIC IDs has been
retrieved, this is not necessary. The list of APIC IDs will be identified
by a GUIDed HOB. If the GUIDed HOB is present, use the SEV-SNP AP Create
protocol to start the AP for the first time and each time thereafter.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Ray Ni <ray.ni@intel.com>
LoongArch64 requires CpuMmio2Dxe, add it into LoongArch64 field.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
Reviewed-by: Ray Ni <ray.ni@intel.com>
On a multi-processor system, if the BSP dose not know how many APs are
online or cannot wake up the AP via broadcast, it can collect AP
resouces before wakeing up the AP and add a new HOB to save the
processor resouces.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Yanbo Huang
Jiaxin Wu
Alexey Kardashevskiy
Gerd Hoffmann
Dongyan Qian
xieyuanh
Paul Grimes
Dun Tan
Ning Feng
Ray Ni
Tom Lendacky
Chao Li