Moved PcdDeviceTreeInitialBaseAddress and PcdDeviceTreeAllocationPadding
to OvmfPkg for easier use by other architectures.
Build-tested only (with "ArmVirtQemu.dsc").
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4584
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The patch "f07a9df9af60 ArmVirtPkg: Enable stack guard"
enabled stack overflow detection for ArmVirtPkg. Following
this patch, running UEFI shell command 'dmpstore' resulted
in a crash indicating a stack overflow. Invoking 'dmpstore'
results in recursive calls to CascadeProcessVariables ()
which apparently consumes the available stack space and
overflows.
Normally, SEC and PEI run off the initial stack, and the
DxeIpl PEIM is in charge of launching the DxeCore with a
full-sized stack and remapping it non-executable as well.
PrePi platforms take some shortcuts and the DXE and BDS
run off the initial stack which is relatively small. It
is therefore desirable to allocate 128 KiB worth of boot
services data memory as the stack for the Dxe phase.
The PrePiMain () in ArmVirtPkg/PrePi/PrePi.c invokes the
LoadDxeCoreFromFv () to load the Dxe core and transfers
control. The second parameter to LoadDxeCoreFromFv () is
the stack size, which is currently set to 0.
LoadDxeCoreFromFv () is implemented in PrePiLib and if the
stack size is 0, it continues to use the initial stack.
However, if a stack size is specified in the call to
LoadDxeCoreFromFv (), memory is allocated for a new stack
and the stack is switched to use the newly allocated stack
for the Dxe phase.
Therefore, specify 128 KiB as the stack size in the call to
LoadDxeCoreFromFv () so that a separate stack is allocated
and used for the Dxe phase.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
PrePi has a bare metal entry point, and so it is in charge of calling
the library constructors once the C runtime has been initialized
sufficiently.
However, we are now relying on a HOB to have been constructed by the
time the MMU code runs, and so the constructors should be run before
that.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3737
Apply uncrustify changes to .c/.h files in the ArmVirtPkg package
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
We no longer use ELF PIE executables to implement the self-relocating
PrePi so drop the custom linker script and visibility override header
file.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Sami Mujawar <Sami.Mujawar@arm.com>
Instead of having a GCC specific routine to perform self-relocation
based on ELF metadata, use the PE/COFF metadata and the existing
PeCoff library routines. This reduces the amount of bespoke assembler
code that is a burden to maintain, and is not portable across the set
of toolchains we support.
This does require some special care, as we have no control over how
the C code references global symbols, so we need to emit these
references from the calling assembler code. Otherwise, they may be
emitted as absolute references, in which case they need to be fixed
up themselves, leading to a circular dependency.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Sami Mujawar <Sami.Mujawar@arm.com>
In some cases, the CLANG38 toolchain profile in LTO mode emits GOT
based relocations in spite of our attempts to avoid this, by using
hidden visibility, -Bsymbolic etc.
On AARCH64, we managed to work around this by processing the GOT
based relocations in GenFw. As it turns out, the same issue exists
on 32-bit ARM, but unfortunately, we cannot use a similar trick to
get rid of the GOT entry, and the relocation metadata is insufficient
to locate the GOT entry in the binary.
Note that in this particular case, we are interested in PIE linking
only (i.e., producing a .rela section containing dynamic relocations
that the startup code can process directly), and not in position
independent code generation, and by passing the -pie option to the
linker directly using -Wl,-pie (and dropping -shared), we can coerce
the GOLD linker into doing only the former rather than both when it
performs its LTO code generation.
Acked-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The PcdCoreCount dependency in the "ArmVirtPrePiUniCoreRelocatable.inf"
file is false; the module doesn't consume the PCD. Clean up the INF.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The self-relocating PrePi module that is used by the ArmVirtQemuKernel
and ArmVirtXen targets runs the linker in PIE mode so that it emits
dynamic relocations into the final image in a way that permits the
module to relocate itself into place before calling into the C code.
When building these targets using the CLANG38 toolchain, we switch
from the BFD to the GOLD linker, which behaves a bit differently when
building PIE executables, and insists on emitting GOT indirected symbol
references throughout, which means a) that we end up with absolute
addresses (which need to be fixed up at load time) for no good reason,
and b) we have to add support for handling GOT entries to GenFw if we
want to convert them into PE/COFF.
So instead, let's emit a shared library. Since the ELF image only serves
as the input to GenFw, this does not lead to any loss of functionality,
although it does require the -Bsymbolic linker option to be added to
ensure that no symbol based dynamic relocations are emitted (which
would, e.g., permit lazy binding for shared libraries). So for all
other toolchains, the linker option changes are a no-op.
Then, we have to convince CLANG38/GOLD that there is no need to refer
to symbols via a GOT entry. This is done by forcing hidden visibility
for all symbols in all components that make up the PrePi SEC module:
this informs the linker that a symbol is never exported or preempted,
making it safe to refer to it directly from anywhere in the code,
rather than indirectly via a GOT entry.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Derive the size of the GCD memory space map directly from the CPU's
information registers rather than from the PcdPrePiCpuMemorySize PCD,
which will be removed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
When setting up the stack in the startup code and jumping into C code
for the first time, ensure that the frame pointer register is cleared
so that backtraces terminate correctly. Otherwise, output like the
below is shown when encountering an exception on a DEBUG build:
Synchronous Exception at 0x0000000078A14780
PC 0x000078A14780 (0x000078A00000+0x00014780) [ 0] ArmVeNorFlashDxe.dll
PC 0x000078A10634 (0x000078A00000+0x00010634) [ 0] ArmVeNorFlashDxe.dll
PC 0x000078A11CF0 (0x000078A00000+0x00011CF0) [ 0] ArmVeNorFlashDxe.dll
PC 0x000078A11DD0 (0x000078A00000+0x00011DD0) [ 0] ArmVeNorFlashDxe.dll
PC 0x00007BC9D87C (0x00007BC98000+0x0000587C) [ 1] PartitionDxe.dll
PC 0x00007BC99B3C (0x00007BC98000+0x00001B3C) [ 1] PartitionDxe.dll
PC 0x00007F362F50 (0x00007F359000+0x00009F50) [ 2] DxeCore.dll
PC 0x00007BD63BB0 (0x00007BD5B000+0x00008BB0) [ 3] BdsDxe.dll
PC 0x00007BD6EE00 (0x00007BD5B000+0x00013E00) [ 3] BdsDxe.dll
PC 0x00007BD67C70 (0x00007BD5B000+0x0000CC70) [ 3] BdsDxe.dll
PC 0x00007F3724F0 (0x00007F359000+0x000194F0) [ 4] DxeCore.dll
PC 0x00004008FC30
PC 0x000040090130
PC 0x5800F6025800F5E1
Recursive exception occurred while dumping the CPU state
which is rather unhelpful, given that this prevent the remaining debug
output from being printed (register dump, stack dump, fault related
system registers etc)
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Among other things, the header file declares the ArchInitialize()
function, which is called from "PrePi.c", and implemented (dependent on
architecture) in "AArch64/ArchPrePi.c" and "Arm/ArchPrePi.c".
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Suggested-by: Michael Kinney <michael.d.kinney@intel.com>
Ref: http://mid.mail-archive.com/E92EE9817A31E24EB0585FDF735412F56327F7D3@ORSMSX113.amr.corp.intel.com
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The PrePi code we inherited from ArmPlatformPkg contains a rather
obscure optimization, where entry points of the PE/COFF and LZMA
handling routines are recorded in special HOBs, allowing DXE core
to call into that code directly rather than carry its own copy of
these libraries.
Given that no ArmVirtPkg platforms actually include the library
resolutions* that take advantage of these optimizations, let's not
bother with them, and remove the associated code.
* EmbeddedPkg/Library/LzmaHobCustomDecompressLib/LzmaHobCustomDecompressLib.inf
EmbeddedPkg/Library/DxeHobPeCoffLib/DxeHobPeCoffLib.inf
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
PrePi doesn't use anything defined by this package so drop the bogus
dependency.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
ArmPlatformStackLib has hooks into primary/secondary core PCDs and
other ArmPlatformLib related junk, so let's simply set the stack
pointer directly. This is trivial given that our PrePi is unicore
only.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Remove the pointless dependency on ArmPlatformLib: none of the code we
call from it actually does anything useful.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
ArmVirtQemuKernel and ArmVirtXen use essentially the same code to
retrieve DRAM information from the DT /memory node at early boot,
and invoke it via the ArmPlatformPeiBootAction () hook exposed by
ArmPlatformLib. Let's move this code into the PrePi implementation
these platforms share between them (and not with any other platforms)
so we can eliminate another dependency on the messy ArmPlatformLib.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
QEMU and KVM based ARM/AARCH64 virtual machines only enter UEFI on
a single core, so ArmPlatformIsPrimaryCore() always returns true.
And even if it didn't, our code does absolutely nothing meaningful
based on its return value, so don't bother calling it, and remove
another frivolous dependency on ArmPlatformLib.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Remove GetPlatformPpi() from PrePi: it is not used anywhere.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Instead of invoking the library constructors of some libraries by
hand, invoke the generated function ProcessLibraryConstructorList
in AutoGen.c so all constructors are executed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Recording the top of SEC visible system memory in a global variable is
not necessary, and violates the constraints of the SEC/PEI environment,
given that it may execute from NOR flash. So remove it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
This updates all assembly source files under ArmVirtPkg to mark
exported functions as ASM_FUNC(), which puts them in a separate
section, allowing the linker to prune code that is left unused.
At the same time, clean up the code to get rid of LoadConstantToReg()
instances involving symbol references, each of which emits an absolute
literal, and hence and entry in the PE/COFF .reloc table.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The ArmVirtPkg platforms that use PrePi have no notion of boot remapped
aliases, so we can simply jump to CEntryPoint() directly rather than
via an absolute reference.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Both the ARM and the AARCH64 versions of the PrePi code (shared between
ArmVirtQemuKernel and ArmVirtXen) 'preserve' values across a function
call using registers that are not in fact callee saved. So fix that.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Commit b89919ee8f ("BaseTools AARCH64: override XIP module linker
alignment to 32 bytes") updated the various AARCH64 toolchain definitions
to allow SEC, PEI_CORE and PEIM modules to be built with minimal alignment
requirements even when using the AArch64 small code model which normally
requires 4 KB section alignment.
This involves conversion of ADRP instructions into ADR instructions, which
can only be done reliably if the ELF and the PE/COFF sections appear at
the same offset modulo 4 KB.
The ArmVirtPrePiUniCoreRelocatable linker script did not yet take this
into account, so update it by starting the .text section at the next
appropriately aligned offset PECOFF_HEADER_SIZE bytes into the image.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
To accommodate upcoming GCCx toolchain versions that require 'gcc' to
be used as the linker in order to support LTO, switch GCC44 and later
(including CLANG35) to a new DLINK build rule that invokes 'gcc' as the
linker instead of 'ld'. Since gcc expects its command line arguments in
a different format, and expects arguments that it needs to pass to the
linker to be prefixed with '-Wl,', this involves changes to most of the
DLINK_FLAGS definitions in tools_def.template, as well as some changes to
module .INF files that set their own linker options.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Newer versions of ld automatically emit .gnu.hash and .note.gnu.build-id
sections, which are not listed in the linker script, and will end up
breaking the build with an allocation conflict, e.g.,
/usr/bin/aarch64-linux-gnu-ld: section .note.gnu.build-id loaded at
[0000000000000000,0000000000000023] overlaps section .text loaded at
[0000000000000000,0000000000017dbf]
Since we don't require or care about these sections, update the linker
script so that they are discarded. Note that this involves emitting the
.note.gnu.build-id section into a non-allocatable segment to prevent the
linker from noticing that it is being discarded (and subsequently
complaining about it)
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Jordan Justen <jordan.l.justen@intel.com>
This adds support to the self relocating PrePi instance that is built
as a PIE ET_DYN executable. It primarily involves porting the relocation
routine to use ELF32 REL entries instead of ELF64 RELA entries which is
what AArch64 uses.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19331 6f19259b-4bc3-4df7-8a09-765794883524
Now that we dropped all ArmPlatformGlobalVariableLib dependencies,
there is no longer a need to allocate and clear out the global
variable region in the PrePi init code. So remove it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18991 6f19259b-4bc3-4df7-8a09-765794883524
Drop the call to ArmInvalidateDataCache () from the PrePi startup
sequence. This kind of data cache maintenance should not be performed
when running under virtualization.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18757 6f19259b-4bc3-4df7-8a09-765794883524
The ArmVirtPrePiUniCoreRelocatable module comes with its own GNU
linker script to create a PIE executable that can relocate itself
at runtime. In order to be able to build this module using CLANG,
we need to adhere to the section alignment passed via to the linker
using -z commmon-page-size, so add this to the linker script.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18203 6f19259b-4bc3-4df7-8a09-765794883524
This fixes the declaration and definition of mSystemMemoryEnd so that it
is correctly annotated as a non-function symbol. Also adds the ASM_PFX
prefix, which is empty on AARCH64 but should be included for correctness.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17861 6f19259b-4bc3-4df7-8a09-765794883524
This fixes the ArmVirtXen build that was broken by r17835, which adds
a global variable mSystemMemoryEnd which is shared between a module
and a library it depends on.
Add the same global variable to the relocatable PrePi used by ArmVirtXen.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17837 6f19259b-4bc3-4df7-8a09-765794883524