Add UnicodeStrToAsciiStrS() and AsciiStrToUnicodeStrS() API.
These 2 safe version APIs are used to replace UnicodeStrToAsciiStr() and
AsciiStrToUnicodeStr() API.
The safe version string convert APIs use similar check as StrCpyS().
Cc: Liming Gao <Liming.Gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <Jiewen.Yao@intel.com>
Reviewed-by: Liming Gao <Liming.Gao@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Adds a public header for NVMe v1.1 spec. definitions. The majority
of these definitions where copied from a private header in
MdeModulePkg/Bus/Pci/NvmExpress/NvmExpressHci.h. Additional
definitions were added e.g. the NVMe Smart Health Log and
Firmware Info. Log structures. These definitions should be
in a public header so that clients of the NVMe passthru protocol
can use them to execute NVMe commands.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Darbin Reyes <darbin.emm.reyes@hpe.com>
Reviewed-by: Samer El-Haj-Mahmoud <samer.el-haj-mahmoud@hpe.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Add more comments:
1) EDKII version safe string function is similar as the one C11.
2) If error is returned, the Destination is unmodified.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
There is absolutely no reason to artificially limit the SKU range to 1-255.
PI1.4a spec fixed the artificial limitation.
This patch is to follow PI1.4a spec to remove PCD_MAX_SKU_ID definition,
the check to PCD_MAX_SKU_ID and the comments describes the limitation.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
In Previous PI spec (< PI1.4a) Volume 1, Section 7.4.1, the callback
EFI_PEIM_NOTIFY_ENTRY_POINT is defined. A description for the arguments
are provided but not for the EFI_STATUS return value.
PI1.4a updated EFI_PEIM_NOTIFY_ENTRY_POINT definition to include a new
paragraph with this sentence after the arguments:
"The status code returned from this function is ignored"
This patch is to follow PI1.4a spec to update the code.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Previous PI spec (< PI1.4a) has EFI_RESOURCE_ATTRIBUTE_PERSISTENT and
EFI_RESOURCE_ATTRIBUTE_READ_ONLY_PROTECTABLE with same value 0x00800000.
To resolve the conflict, PI1.4a updated
EFI_RESOURCE_ATTRIBUTE_READ_ONLY_PROTECTABLE to 0x00080000, this patch
is to follow PI1.4a spec to update the code.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
According to the SCSI Block Commands - 4 (SBC-4) spec, the patch add SCSI
unmap command support in IndustryStandard/Scsi.h.
The following changes have been made:
1. Add SCSI unmap command OP Code
2. Update the structure definition for Block Limits VPD page
3. Add structure definitions for UNMAP parameter list header & UNMAP block
descriptor.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Add NFIT definition from ACPI 6.1 for the NVDIMM Control Region
Structure Valid Fields for Manufacturing Location and Manufacturing Date
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add HII definitions from UEFI 2.6 for HII Image Variability and PNG
Blocks
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
The UEFI2.5 Errata (Mantis ticket 1472 -
https://mantis.uefi.org/mantis/view.php?id=1472) updated
'PortMultiplierPort' parameter description for the following services in
EFI_ATA_PASS_THRU_PROTOCOL:
1. PassThru
2. BuildDevicePath
3. ResetDevice
Now, if there is no port multiplier on a ATA controller port, the
PortMultiplierPort parameter should be set to 0xFFFF instead of 0.
Please note that this is an incompatible semantic change. The consumer of
EFI_ATA_PASS_THRU_PROTOCOL needs to re-examine its usage to follow UEFI
2.5 Errata mantis 1472.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
The UEFI2.5 spec (Mantis ticket 1353 -
https://mantis.uefi.org/mantis/view.php?id=1353) updated the Port
Multiplier Port Number description of SATA device path to use 0xFFFF when
the device is directly connected to the HBA.
Please note that this is an incompatible semantic change. The consumer of
SATA device path needs to re-examine its usage to follow UEFI 2.5 mantis
1353.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
The ComId for Block SID authentication command is
0x0005 according to "TCG Storage Feature Set: Block
SID Authentication Specification Version 1.0.0". Update code to
follow this spec requirement.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Revert AuditMode/DeployedMode definition from Customized Secure Boot feature defined in UEFI2.5 Mantis 1263.
The feature has been moved to
https://github.com/tianocore/edk2-staging/tree/Customized-Secure-Boot
Previous check-in hash is
SHA-1: 79e7b64727
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: El-Haj-Mahmoud Samer <samer.el-haj-mahmoud@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Add #defines for "Expect" header, which is a part of RFC 2616
and used for HTTP PUT/POST operations.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hegde, Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
In PerformanceLib, Identifier is for single PERF, not the pair of PERF.
When find the matched START and END pair, the identifier will not be checked.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The Microsoft Debug Port Table 2 (DBG2) specification revision
October 6, 2015 adds support for Serial Port Subtypes for ARM.
This patch adds these definitions.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The Serial Port Console Redirection Table specification Version 1.03 -
August 10, 2015 adds support for Serial Port Subtypes for ARM. These
Subtypes are described in the Table 3 of the Microsoft Debug Port Table
2 (DBG2) Specification - December 10, 2015.
This patch adds macro definitions for these.
Code at: 79678a0f39
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
These definitions are defined in SD physical layer simplified spec
and eMMC electrical standard spec.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
The definitions are defined in TCG storage core and opal spec.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
As the SMBIOS table types belong to the SMBIOS standard, they were
moved from the SMBIOS Protocol header into the SMBIOS
IndustryStandard header without the EFI_-prefix. Defines with the
EFI_-prefix have been kept in the Protocol header for
backwards-compatibility, resolving to the IndustryStandard defines.
The same has been done with the C types.
The SMBIOS table header structure had been duplicated -
SMBIOS_STRUCTURE in the IndustryStandard header and
EFI_SMBIOS_TABLE_HEADER in the Protocol file - and thus the
Protocol type was replaced with a typedef to the InudstryStandard's.
This doesn't only make it easier to maintain, but it also prevents
potential future issues as the Protocol type has been aligned, while
the standard and the IndustryStandard header declare it as
byte-packed.
This has worked well till now only because the members of the
structure do not require alignment yet.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This is a small convenience function that eases signaling an event group
(identified by GUID). An example where it can be used is Platform BDS
signaling the End-of-DXE event group.
The naming follows EfiNamedEventSignal().
The patch modifies the library class header, and updates the most commonly
used library instance at once. Other library instances in the edk2 tree
will be adapted in the following patches.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Suggested-by: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add gEfiIa32X64ProcessorErrorSectionGuid and
gEfiArmProcessorErrorSectionGuid to
match the definition in the UEFI 2.6 specification Table 249.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The definition of DEBUG_LOADFILE was incorrectly described as "UNDI
Driver". Correct this to align with MdePkg.dec.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Add additional HTTP 1.1 definitions that are useful in HTTP
applications, such as User-Agent, Location, and x-Auth-Token
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Base on the UEFI2.6, Add the new HII action type
EFI_BROWSER_ACTION_SUBMITTED to notify HII driver
when its question values are submitted.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add the definition for the new return status code defined in UEFI 2.6.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The HeaderLog field of the PCIe Extended Capabilities Advanced Error
Reporting structure was incorrectly defined as a 32-bit field. The PCIe
2.1 Base Specification, section 7.10, lists this as 16 bytes, or 4
DWORDs.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Follow UEFI 2.6 spec to minor update the comments of
AllocatePages() and AllocatePool().
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>