We cannot specify a pin-GSI connection for the SCI directly in the _PRT
because that implies ActiveLow polarity, clashing with both qemu and the
MADT we prepare.
With this patch the RHEL-6 guest logs the following:
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *10 11)
The patch amends svn rev 13625. Testing it in a RHEL-6 guest, the problems
described in
<http://sourceforge.net/mailarchive/message.php?msg_id=29660862> do not
reappear.
The code is derived from Paolo Bonzini's patch (originally appearing as
SeaBIOS commit f64a472a, "acpi: reintroduce LNKS"). Said original patch is
copyrighted by Red Hat (our common employer), and it has been relicensed
<http://sourceforge.net/mailarchive/message.php?msg_id=30393854> to form
the basis of this derived patch for edk2. The latter is therefore
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14111 6f19259b-4bc3-4df7-8a09-765794883524
Previously for IA32, we would only try to run qemu. Newer releases
of QEMU now have renamed the x86 qemu to qemu-system-i386.
Now, we search for:
1. qemu-system-i386
2. qemu-system-x86_64
3. qemu
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14101 6f19259b-4bc3-4df7-8a09-765794883524
The Xcode assembler is much pickier than GCC. Also the 64-bit
linker is not a fan of relocations so it is better to us IP
relative code, but at least it removes a relocation entry.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Andrew Fish <afish@apple.com>
[jordan.l.justen@intel.com: use .byte for retfq rather than lret]
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14055 6f19259b-4bc3-4df7-8a09-765794883524
We're supposed to zero everything in the kernel bootparams that we don't
explicitly initialise, other than the setup_header from 0x1f1 onwards
for a precisely defined length, which is copied from the bzImage.
We're *not* supposed to just pass the garbage that we happened to find
in the bzImage file surrounding the setup_header.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14052 6f19259b-4bc3-4df7-8a09-765794883524
Boot protocol 2.05 just means that the relocatable_kernel field is present
in the header. We should actually check that it's *set*.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14051 6f19259b-4bc3-4df7-8a09-765794883524
We currently just jump to offset 0x200 in the kernel image, in 64-bit
mode. This is completely broken. If it's a 32-bit kernel, we'll be
jumping into the compressed data payload.
If it's a 64-bit kernel, it'll work... but the 0x200 offset is
explicitly marked as 'may change in the future', has already changed
from 0x100 to 0x200 in the past with no fanfare, and bootloaders are
instructed that they should look at the ELF header to find the offset.
So although it does actually work today, it's still broken in the
"someone needs to whipped for doing it this way" sense of the word.
In fact, the same bug exists in other bootloaders so the 0x200 offset
probably *is* now set in stone. But still it's only valid to use it if
we *know* it's a 64-bit kernel. And we don't. There *is* no ELF header
that we can look at when we're booting a bzImage, and we can't rely on
it having a PE/COFF header either.
The 32-bit entry point is always guaranteed to work, and we need to
support it anyway. So let's just *always* use it, in 32-bit mode, and
then we don't have to make up some horrible heuristics for detecting
32-bit vs. 64-bit kernels.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14045 6f19259b-4bc3-4df7-8a09-765794883524
Move these states from the DSDT to the SSDT. Override the default
configuration if the host has the following qemu commit:
commit 459ae5ea5ad682c2b3220beb244d4102c1a4e332
Author: Gleb Natapov <gleb@redhat.com>
Date: Mon Jun 4 14:31:55 2012 +0300
Add PIIX4 properties to control PM system states.
This patch adds two things. First it allows QEMU to distinguish
between regular powerdown and S4 powerdown. Later separate QMP
notification will be added for S4 powerdown. Second it allows
S3/S4 states to be disabled from QEMU command line. Some guests
known to be broken with regards to power management, but allow to
use it anyway. Using new properties management will be able to
disable S3/S4 for such guests.
Supported system state are passed to a firmware using new fw_cfg
file. The file contains 6 byte array. Each byte represents one
system state. If byte at offset X has its MSB set it means that
system state X is supported and to enter it guest should use the
value from lowest 3 bits.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14003 6f19259b-4bc3-4df7-8a09-765794883524
The ACPI 5.0 specification says:
7.3.4.4 System \_S3 State
[...]
* Dynamic RAM context is maintained.
[...]
This corresponds to the following in the PIIX4 spec:
PMCNTRL -- POWER MANAGEMENT CONTROL REGISTER (IO)
[...]
Bits[12:10] Suspend Type
[...]
001 STR (Suspend To RAM)
Also, this (ie. decimal 1) is the suspend type value that qemu recognizes
as an S3 (suspend to ram) request.
Only the value for PM1a_CNT.SLP_TYP is set (PM1b_CNT.SLP_TYP is left at
zero), since in OVMF we don't report the optional PM1b_EVT_BLK register
block to OSPM. (PM1b_EVT_BLK is defined as 0 in "Platform.h"; see "4.8.1.1
PM1 Event Registers" in the ACPI 5.0 specification.)
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14002 6f19259b-4bc3-4df7-8a09-765794883524
The ACPI 5.0 specification says:
7.3.4.5 System \_S4 State
[...]
* DRAM context is not maintained.
[...]
This corresponds to the following in the PIIX4 spec:
PMCNTRL -- POWER MANAGEMENT CONTROL REGISTER (IO)
[...]
Bits[12:10] Suspend Type
[...]
010 POSCL (Powered On Suspend, Context Lost)
Also, this (ie. decimal 2) is the default suspend type value that qemu
recognizes as an S4 (suspend to disk) request.
Only the value for PM1a_CNT.SLP_TYP is corrected (PM1b_CNT.SLP_TYP is left
at zero), since in OVMF we don't report the optional PM1b_EVT_BLK register
block to OSPM. (PM1b_EVT_BLK is defined as 0 in "Platform.h"; see "4.8.1.1
PM1 Event Registers" in the ACPI 5.0 specification.)
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14001 6f19259b-4bc3-4df7-8a09-765794883524
The qemu standard vga has a MMIO bar in qemu 1.3+.
Use it if available.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13969 6f19259b-4bc3-4df7-8a09-765794883524
Move to a table-driven hardware detection. Add a table with PCI IDs,
card name and variant enum. Use the table for hardware detection and
initialization. Rename Cirrus-specific data and code to carry "cirrus"
in the name.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13967 6f19259b-4bc3-4df7-8a09-765794883524
If QEMU's -kernel parameter was used, then download the
kernel from the FwCfg interface, and launch it. (See -kernel,
-initrd, -append) The application uses the LoadLinuxLib to boot
the kernel image.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13923 6f19259b-4bc3-4df7-8a09-765794883524
This code is based on efilinux's bzimage support.
git://git.kernel.org/pub/scm/boot/efilinux/efilinux.git
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Matt Fleming <matt.fleming@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13922 6f19259b-4bc3-4df7-8a09-765794883524
This file is from the efilinux project where it resides
under the path loaders/bzimage/bzimage.h.
git://git.kernel.org/pub/scm/boot/efilinux/efilinux.git
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Matt Fleming <matt.fleming@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13920 6f19259b-4bc3-4df7-8a09-765794883524
Structures should not be directly assigned in EDK II
code, since this leads to different behaviours on various
compilers.
Instead, use ZeroMem to zero out the structures.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13878 6f19259b-4bc3-4df7-8a09-765794883524
OvmfPkg/VirtioBlkDxe/VirtioBlk.c:667: undefined reference to `__umoddi3'
OvmfPkg/VirtioBlkDxe/VirtioBlk.c:750: undefined reference to `__udivdi3'
These operations would come from libgcc in the IA32 build, but OVMF does not
link against libgcc.
Regression-tested the X64 build with Fedora 18 Alpha XFCE and Windows 8
Consumer Preview guests.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13846 6f19259b-4bc3-4df7-8a09-765794883524
AppendDesc() should have a prefix implying its containing library,
VirtioLib. Update its sole client VirtioBlkDxe.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13843 6f19259b-4bc3-4df7-8a09-765794883524
Introduce a new library called VirtioLib, for now only collecting the
following reusable functions with as little changes as possible:
- VirtioWrite()
- VirtioRead()
- VirtioRingInit()
- VirtioRingUninit()
- AppendDesc()
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13842 6f19259b-4bc3-4df7-8a09-765794883524
Separate virtio-blk related macro and type definitions from generic virtio
related ones. Adapt the virtio-blk driver since it needs the latter too.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13841 6f19259b-4bc3-4df7-8a09-765794883524
since they are in fact virtio-blk specific.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13840 6f19259b-4bc3-4df7-8a09-765794883524
This commit consists of:
- a verbatim move ("similarity index 100%" in git parlance),
- an updated #include directive in VirtioBlkDxe/VirtioBlk.h,
- and an OvmfPkg.dec package entry in VirtioBlkDxe/VirtioBlk.inf, so that
the new include directory is searched.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13836 6f19259b-4bc3-4df7-8a09-765794883524
2 nodes in an OpenFirmware device path are sufficient for the generic
check at the beginning of TranslateOfwNodes(). The driver specific
branches check for the necessary nodes individually.
The number of nodes saved for examination is unchanged.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13800 6f19259b-4bc3-4df7-8a09-765794883524
The TimerLib in the OvmfPkg uses a global variable called mPmba and depends on that global being updated. This works for modules loaded into memory, but not XIP modules in ROM/FLASH.
This patch removes the mPmba global variable and instead reads the PIIX4 Power Management Base Address from PCI configuration space when it is needed. This patch also simplifies the initialization logic in the constructor and introduces #defines to eliminate hard coded values in the function implementations. According to the PIIX4 documentation, the IO Space enable bit in the PCI Command Register does not have to be set for the Power Management Base Address to be decoded, so that one op has been removed from the constructor.
I have tested this patch with QEMU and verified that the UDK Debugger us functional when SOURCE_DEBUG_ENABLE is set.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
I also tested it with RHEL-6.3 guest boot/shutdown, Fedora 18 Alpha XFCE
guest boot/shutdown, and Windows 8 Consumer Preview guest
boot/reboot/shutdown. (RHEL-6.3 host.) I didn't notice any adverse effects.
Tested-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13783 6f19259b-4bc3-4df7-8a09-765794883524
This patch preserves this information when SOURCE_DEBUG_ENABLE is set.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Laszlo Ersek
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13780 6f19259b-4bc3-4df7-8a09-765794883524
jljusten
andrewfish
lzeng14
mdkinney