With the help of the VirtioFsFuseOpenDir() and
VirtioFsFuseReleaseFileOrDir() functions introduced previously, we can now
open and close the root directory. So let's implement
EFI_SIMPLE_FILE_SYSTEM_PROTOCOL.OpenVolume().
OpenVolume() creates a new EFI_FILE_PROTOCOL object -- a reference to the
root directory of the filesystem. Thus, we have to start tracking
references to EFI_SIMPLE_FILE_SYSTEM_PROTOCOL, lest we unbind the
virtio-fs device while files are open.
There are two methods that release an EFI_FILE_PROTOCOL object: the
Close() and the Delete() member functions. In particular, they are not
allowed to fail with regard to resource management -- they must release
resources unconditionally. Thus, for rolling back the resource accounting
that we do in EFI_SIMPLE_FILE_SYSTEM_PROTOCOL.OpenVolume(), we have to
implement the first versions of EFI_FILE_PROTOCOL.Close() and
EFI_FILE_PROTOCOL.Delete() in this patch as well.
With this patch applied, the UEFI shell can enter the root directory of
the Virtio Filesystem (such as with the "FS3:" shell command), and the
"DIR" shell command exercises FUSE_OPENDIR and FUSE_RELEASEDIR, according
to the virtiofsd log. The "DIR" command reports the root directory as if
it were empty; probably because at this time, we only allow the shell to
open and to close the root directory, but not to read it.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3097
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20201216211125.19496-12-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Submit the FUSE_INIT request to the Virtio Filesystem device, for starting
the FUSE session.
The FUSE_INIT request is logged by the virtio-fs daemon, with this patch
applied, when (for example) using the "CONNECT" UEFI shell command.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3097
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20201216211125.19496-9-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Introduce the VIRTIO_FS_FUSE_REQUEST and VIRTIO_FS_FUSE_RESPONSE
structures, which are the common headers for the various FUSE
request/response structures.
Introduce the VirtioFsFuseNewRequest() helper function for populating
VIRTIO_FS_FUSE_REQUEST, from parameters and from a VIRTIO_FS-level request
counter.
Introduce the VirtioFsFuseCheckResponse() helper function for verifying
most FUSE response types that begin with the VIRTIO_FS_FUSE_RESPONSE
header.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3097
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20201216211125.19496-7-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Add the VirtioFsInit(), VirtioFsUninit(), and VirtioFsExitBoot()
functions.
In VirtioFsInit():
- Verify the host-side config of the virtio-fs device.
- Save the filesystem label ("tag") for later, from the configuration area
of the virtio-fs device.
- Save the virtio queue size for later as well.
- Set up the virtio ring for sending requests.
In VirtioFsUninit():
- Reset the device.
- Tear down the virtio ring.
In VirtioFsExitBoot():
- Reset the device.
With this patch, the UEFI connect / disconnect controller operations
involve virtio setup / teardown; they are visible in the virtio-fs
daemon's log file. The virtiofsd log also confirms the device reset in
VirtioFsExitBoot(), when an OS is booted while the virtio-fs device is
bound.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3097
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20201216211125.19496-5-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Complete the Supported, Start, and Stop member functions of
EFI_DRIVER_BINDING_PROTOCOL sufficiently for exercising the UEFI driver
model:
- bind virtio-fs devices,
- produce placeholder EFI_SIMPLE_FILE_SYSTEM_PROTOCOL instances on them.
On the "TO_START" (= Virtio) side, the VirtioFsBindingSupported() function
verifies the Virtio subsystem ID for the virtio-fs device (decimal 26 --
see
<https://github.com/oasis-tcs/virtio-spec/blob/87fa6b5d8155/virtio-fs.tex>).
Beyond that, no actual Virtio setup is performed for now. Those bits are
going to be implemented later in this series.
On the "BY_START" (= UEFI filesystem) side, the VirtioFsOpenVolume()
function -- which is the sole EFI_SIMPLE_FILE_SYSTEM_PROTOCOL member
function -- is a stub; it always returns EFI_NO_MEDIA, for now.
The "CONNECT", "DISCONNECT", and "MAP -R" UEFI Shell commands can be used
to test this patch.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3097
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20201216211125.19496-4-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
The purpose of the driver is to ease file exchange (file sharing) between
the guest firmware and the virtualization host. The driver is supposed to
interoperate with QEMU's "virtiofsd" (Virtio Filesystem Daemon).
References:
- https://virtio-fs.gitlab.io/
- https://libvirt.org/kbase/virtiofs.html
VirtioFsDxe will bind virtio-fs devices, and produce
EFI_SIMPLE_FILE_SYSTEM_PROTOCOL instances on them.
In the longer term, assuming QEMU will create "bootorder" fw_cfg file
entries for virtio-fs devices, booting guest OSes from host-side
directories should become possible (dependent on the matching
QemuBootOrderLib enhancement).
Add the skeleton of the driver. Install EFI_DRIVER_BINDING_PROTOCOL with
stub member functions. Install EFI_COMPONENT_NAME2_PROTOCOL with final
member functions. This suffices for the DRIVERS command in the UEFI Shell
to list the driver with a human-readable name.
The file permission model is described immediately in the INF file as a
comment block, for future reference.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3097
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20201216211125.19496-2-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Laszlo Ersek