Current implementation executes key notify function in TimerHandler
at TPL_NOTIFY. The code change is to make key notify function
executed at TPL_CALLBACK to reduce the time occupied at TPL_NOTIFY.
The code will signal KeyNotify process event if the key pressed
matches any key registered and insert the KeyData to the EFI Key
queue for notify, then the KeyNotify process handler will invoke
key notify functions at TPL_CALLBACK.
Cc: Ruiyu Ni <Ruiyu.ni@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <Ruiyu.ni@intel.com>
The TtyTerm terminal driver is missing support for sequences produced
by the page up, page down, insert, home, and end keys in some terimnal
emulators. Add them.
Tested under Ubuntu 16.04 using xterm 322-1ubuntu1, GNOME terminal
3.18.3-1ubuntu1, and XFCE terminal 0.6.3-2ubuntu1.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Kyle Roberts <kyroberts@sgi.com>
Signed-off-by: Brian Johnson <bjohnson@sgi.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Roy Franz <roy.franz@hpe.com>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Feng Tian <feng.tian@intel.com>
This reverts commit 31ae446b1a.
Changing the receive FIFO depth in Terminal driver Start() is not
recommended.
A new PCD PcdUartDefaultReceiveFifoDepth was added and
MdeModulePkg/SerialDxe driver uses the PCD as the default receive
FIFO depth.
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
The Serial IO protocol instances provided by SerialDxe and consumed by
TerminalDxe come with a Mode.ReceiveFifoDepth=1 default setting, as
required by UEFI 2.5.
Although TerminalDxe calls EFI_SERIAL_IO_PROTOCOL.SetAttributes() in the
TerminalDriverBindingStart() and TerminalConInTimerHandler() functions, it
only does so to change the Mode.Timeout member. Other members of Mode,
including Mode.ReceiveFifoDepth, are preserved.
On some platforms this causes the UART that underlies TerminalDxe not to
have enough room for bursts of scan codes, which translates to broken
parsing of escape sequences, e.g. cursor movement keys.
According to the UEFI spec, passing ReceiveFifoDepth=0 to
EFI_SERIAL_IO_PROTOCOL.SetAttributes() "will use the device's default FIFO
depth". While TerminalDxe could try to configure a receive FIFO depth that
matches the longest escape sequence it wishes to parse, in practice the
device-specific default FIFO depth -- which may well differ from the
spec-mandated SerialIo->Mode.ReceiveFifoDepth=1 default -- seems to work.
Hence let's just set that.
This issue was exposed by SVN r18971 / git commit 921e987b2b
("ArmPlatformPkg: Use SerialDxe in MdeModulePkg instead of EmbeddedPkg").
In that conversion, MdeModulePkg's SerialDxe started to initialize
Mode.ReceiveFifoDepth to 1 (in conformance with the spec), unlike the
prior, non-conformant initialization to 0 in EmbeddedPkg's SerialDxe.
Since TerminalDxe would never change ReceiveFifoDepth from the new default
value 1, and the ArmPlatformPkg/Drivers/PL011Uart library instance,
underlying SerialDxe through SerialPortLib, would obey it too, they would
collectively effect a receive queue depth of 1, rather than the default 16
or 32. This broke cursor keys on the ARM FVP and Juno platforms.
It is the client of EFI_SERIAL_IO_PROTOCOL that is responsible for
modifying the attributes, if the defaults are not appropriate, hence this
patch modifies TerminalDxe.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Ryan Harkin <ryan.harkin@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Star Zeng <star.zeng@intel.com>
Reported-by: Ryan Harkin <ryan.harkin@linaro.org>
Reference: http://thread.gmane.org/gmane.comp.bios.edk2.devel/4779/focus=6553
Reference: http://thread.gmane.org/gmane.comp.bios.edk2.devel/6594
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19701 6f19259b-4bc3-4df7-8a09-765794883524
The SerialIo->GetControl() function is not required to set the
Control output parameter on error. Make sure we apply the
EFI_SERIAL_INPUT_BUFFER_EMPTY optimization in
TerminalConInTimerHandler() only if the SerialIo->GetControl()
function call set that bit in the Control variable.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18962 6f19259b-4bc3-4df7-8a09-765794883524
Accept the VT220 escape code [3~ as backspace for TtyTerm terminals. This is
sent by many Linux terminals by default. Also accept VT220 function keys
F1-F12, and VT100 F1-F4 keys as these are commonly sent by Linux terminals.
The VT220 escape codes are longer, and variable length so a new state is added
to the state machine along with a variable to construct the multibyte escape
sequence.
There are currently no ambiguous escape sequence prefixes accepted, so the TTY
terminal accepts escape sequences for a variety of terminals. The goal is to
'just work' with as many terminals as possible, rather than properly emulating
any specific terminal. Backspace, Del, and F10 have been tested on xterm,
rxvt, tmux, and screen.
Note: The existing vt100 function key handling does not match the vt100
documentation that I found, so I added the TTY terminal handling
of VT100 F1-F4 (really PF1-PF4 on vt100) separately. The vt100
has no F5-F10 keys, so I don't know what the current vt100 code
is based on.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Roy Franz <roy.franz@linaro.org>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17897 6f19259b-4bc3-4df7-8a09-765794883524
Treat ASCII 0x7F as backspace, rather than delete, for TTY terminals. This
better matches the default Linux terminal settings that are used when connecting
to a simulated platform using xterm or a similar terminal program.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Roy Franz <roy.franz@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17896 6f19259b-4bc3-4df7-8a09-765794883524
This patch a adds new terminal type, TtyTerm, to TerminalDxe. This terminal
type provides a place to add support for various *nix terminals that don't
behave like standard VT terminals. The goal is to 'just work' with as many
terminals as possible, rather than properly emulating any one specific
terminal.
Signed-off-by: Roy Franz <roy.franz@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17895 6f19259b-4bc3-4df7-8a09-765794883524
- Fix EFI_IPv4_ADDRESS usages to use a macro to copy the structure
instead of direct assignment, to avoid runtime alignment errors.
- Fix a EFI_INPUT_KEY usage in TerminalDxe to use CopyMem() to copy the
structure instead of direct assignment, to avoid runtime alignment error.
- Delete excess local variables that are initialized but otherwise unused.
- CompilerIntrinsicsLib library now imported for AARCH64, as well as ARM.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Randy Pawell <randy_pawell@hp.com>
Reviewed-by: Olivier Martin <Olivier.Martin@arm.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16471 6f19259b-4bc3-4df7-8a09-765794883524
Clean up the code to remove unnecessary NotifyHandle in the private data structure.
Signed-off-by: Ruiyu Ni<ruiyu.ni@intel.com>
Reviewed-by: Elvin Li<elvin.li@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13565 6f19259b-4bc3-4df7-8a09-765794883524
Enhance ConSplitter to register hot keys for new connected consoles.
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hot Tian <hot.tian@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13358 6f19259b-4bc3-4df7-8a09-765794883524
Fixes a Terminal FIFO full issue that caused data to be lost. The Unicode and EFI Key FIFOs are now checked to make sure they have spaces before pushing another entry.
Signed-off-by: eugenecohen
Reviewed-by: niruiyu
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12512 6f19259b-4bc3-4df7-8a09-765794883524
Dandan Bi
Ruiyu Ni
Star Zeng
Brian J. Johnson
Laszlo Ersek
Roy Franz
Randy Pawell
Elvin Li
Eric Dong
li-elvin
niruiyu
hhtian
xli24
rsun3
gikidy
vanjeff
qhuang8
AJFISH
xgu3