During normal boot, when EFI_DXE_SMM_READY_TO_LOCK_PROTOCOL is installed
by platform BDS, the SMM IPL locks SMRAM (TSEG) through
EFI_SMM_ACCESS2_PROTOCOL.Lock(). See SmmIplReadyToLockEventNotify() in
"MdeModulePkg/Core/PiSmmCore/PiSmmIpl.c".
During S3 resume, S3Resume2Pei locks SMRAM (TSEG) through
PEI_SMM_ACCESS_PPI.Lock(), before executing the boot script. See
S3ResumeExecuteBootScript() in
"UefiCpuPkg/Universal/Acpi/S3Resume2Pei/S3Resume.c".
Those are precisely the places where the SMRAM at the default SMBASE
should be locked too. Add such an action to SmramAccessLock().
Notes:
- The SMRAM at the default SMBASE doesn't support the "closed and
unlocked" state (and so it can't be closed without locking it, and it
cannot be opened after closing it).
- The SMRAM at the default SMBASE isn't (and shouldn't) be exposed with
another EFI_SMRAM_DESCRIPTOR in the GetCapabilities() members of
EFI_SMM_ACCESS2_PROTOCOL / PEI_SMM_ACCESS_PPI. That's because the SMRAM
in question is not "general purpose"; it's only QEMU's solution to
protect the initial SMI handler from the OS, when a VCPU is hot-plugged.
Consequently, the state of the SMRAM at the default SMBASE is not
reflected in the "OpenState" / "LockState" fields of the protocol and
PPI.
- An alternative to extending SmramAccessLock() would be to register an
EFI_DXE_SMM_READY_TO_LOCK_PROTOCOL notify in SmmAccess2Dxe (for locking
at normal boot), and an EDKII_S3_SMM_INIT_DONE_GUID PPI notify in
SmmAccessPei (for locking at S3 resume).
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1512
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Message-Id: <20200129214412.2361-10-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
In one of the next patches we'll turn PcdQ35TsegMbytes into a dynamic PCD,
to be set by PlatformPei.
Jordan suggested to use gEfiPeiMemoryDiscoveredPpiGuid as SmmAccessPei's
DEPEX for making sure that PlatformPei sets the PCD before SmmAccessPei
consumes it. (PlatformPei installs the permanent PEI RAM.) Such a DEPEX is
supposed to mirror physical firmware, where anything related to SMRAM
cannot run before said platform's physical RAM is discovered (signaled by
the presence of gEfiPeiMemoryDiscoveredPpiGuid).
Introduce the InitQ35TsegMbytes() function and the "mQ35TsegMbytes" extern
variable to "SmramInternal.h" and "SmramInternal.c":
- Both SmmAccess modules (PEIM and DXE driver) are supposed to call
InitQ35TsegMbytes() in their respective entry point functions, saving
PcdQ35TsegMbytes into "mQ35TsegMbytes". This way dynamic PCD fetches can
be kept out of PEI_SMM_ACCESS_PPI and EFI_SMM_ACCESS2_PROTOCOL member
functions later (when we add support for extended TSEG size).
- We can thus replace the current PcdQ35TsegMbytes fetches in
SmmAccessPei's entry point function as well, with reads from
"mQ35TsegMbytes".
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The SMM core depends on EFI_SMM_ACCESS2_PROTOCOL. This small driver (which
is a thin wrapper around "OvmfPkg/SmmAccess/SmramInternal.c" that was
added in the previous patch) provides that protocol.
Notably, EFI_SMM_ACCESS2_PROTOCOL is for boot time only, therefore
our MODULE_TYPE is not DXE_RUNTIME_DRIVER.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19041 6f19259b-4bc3-4df7-8a09-765794883524
Laszlo Ersek
Michael D Kinney