In order to allow the ArmVirtPkg platforms to be built using the
NOOPT target, add it explicitly to the BUILD_TARGETS define.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
These libraries are no longer used, so remove them from the tree.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Create a new ArmVirtMemInfoLib for ArmVirtQemuKernel by cloning the
existing ArmPlatformGetVirtualMemoryMap () for this platform,
(ArmQemuRelocatablePlatformLib *not* ArmVirtPlatformLib), and cleaning
it up:
- remove support for uncached DRAM mappings
- replace EFI_D_xxx with DEBUG_xxx throughout
- use a temp variable to hold the top of the physical address space
- use AllocatePool () instead of AllocatePages (), given that we use
160 bytes only, and the memory is never freed.
In a future patch, we will add this library to the ordinary ArmVirtQemu
platform as well.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Now that the PL031 RTC driver library no longer depends on the ARM
platform specific ArmPlatformSysConfigLib, we no longer need to
implement ArmPlatform.h or have a resolution for that library.
This allows us to get rid of a rather dodgy practice of including
platform headers using compiler flags, which is a bad idea at various
levels.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The VariableRuntimeDxe driver may use CopyMem () on NOR flash regions,
assuming such regions always have full memory semantics. Given that
those regions cannot be mapped as ordinary memory on ARM (due to the
fact that the NOR flash requires device semantics while in write mode)
this prevents us from using BaseMemoryLibOptDxe in VariableRuntimeDxe,
since it may use unaligned accesses and/or DC ZVA instructions, both
of which are incompatible with mappings using device semantics.
Note that there is no way we can work around this by changing the
mapping type between 'memory' and 'device' when switching from read to
write mode and back, because the runtime mapping is created by the OS,
and cannot be changed at will.
So let's just switch to the unaccelerated version of BaseMemoryLib which
does not have the same problem.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Shannon Zhao <zhaoshenglong@huawei.com>
"ArmVirtXen.fdf" pulls in none of the drivers from
"MdeModulePkg/Universal/Network", therefore building them in
"ArmVirtXen.dsc", via "ArmVirt.dsc.inc", is wasted work.
Move the "MdeModulePkg/Universal/Network" drivers from "ArmVirt.dsc.inc"
to "ArmVirtQemu.dsc" and "ArmVirtQemuKernel.dsc".
Place the new block between the "Bds" and "SCSI Bus and Disk Driver"
blocks, similarly to its context in "ArmVirtQemuFvMain.fdf.inc".
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
One of the reasons for introducing virtio-gpu support to OvmfPkg and
ArmVirtpkg was the fact that under KVM virtualization on ARM, the
legacy VGA cannot be used reliably. This is due to an implementation
detail of QEMU+KVM, which remaps cached host memory into the guest
address space as a framebuffer behind a PCI BAR. Given that the purpose
of a memory mapped framebuffer is its side effects, such BARs should
never be mapped cacheable in the guest, and the mismatched attributes
between host and guest result in a loss of coherency, visible as
corruption in the framebuffer image.
This issue does not occur under TCG emulation, nor did we expect it to
actually bring down the guest under KVM, and so it was deemed harmless
to keep support for the VGA device as well. However, as it turns out,
the fact that the framebuffer BAR is mapped using device semantics by
default may result in unalignment faults when we use the ordinary string
copy routines on the contents. In theory, we could work around this by
remapping the BAR as write combining, but it appears the generic PCI
bus driver does not actually implement this.
So let's remove the QemuVideoDxe driver altogether. This may result
in loss of functionality for use cases that rely on the framebuffer
to be directly addressable (such as EFIFB), but given that this never
worked reliably under KVM in the first place, let's not let that stop
us from dropping support for it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
For obscure reasons, ARM platforms use a different implementation of
the ResetSystem() runtime service call than other platforms. So let's
switch all ArmVirtPkg platforms to the generic version instead.
Given that all platforms use an implementation of EfiResetSystemLib [as
consumed by the ResetRuntimeDxe in EmbeddedPkg that we are replacing]
which is unlikely to be depended upon by out of tree platforms, let's
simply modify this library into an implementation of ResetSystemLib
instead [which is what the generic driver in MdeModulePkg consumes]
This does mean we need to update all clients at the same time, which
is why all changes are part of the same patch.
As before, warm reset and platform specific reset are mapped onto
cold reset (which is the only thing PSCI implements, at least the
version we depend on). The new library function EnterS3WithImmediateWake()
is left unimplemented, as permitted by the ResetSystemLib library class.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Include XenPlatformHasAcpiDtDxe and PlatformHasAcpiDtDxe in the 32-bit
builds too.
Please see https://bugzilla.tianocore.org/show_bug.cgi?id=524
why it is needed. With this patch my arm uefi VM boots.
Fixes: 3a2c1548fe
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Nerijus Baliūnas <nerijus@users.sourceforge.net>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
[lersek@redhat.com: move long subj to commit msg body, add short subj]
[lersek@redhat.com: add Fixes reference]
[lersek@redhat.com: keep ACPI DXE modules grouped in QEMU DSCs]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
ArmCpuLib is never used anywhere, and is about to be removed. So remove
any references from our .DSC files.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
In this patch, the ACPI protocol / driver chain is enabled dynamically,
when appropriate. This is being done in one larger patch, because
ArmVirt.dsc.inc, where AcpiTableDxe is built, is used by all the platform
DSCs.
No change in behavior should be observable after this patch on any
ArmVirtPkg platform.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Currently, the file GUID reference of the UEFI Shell app is indirected
via the PCD gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdShellFile,
which is set to a fixed value for our platforms.
So instead, use the new symbolic GUID added for this purpose, and drop
the reference to this PCD, and to the IntelFrameworkModulePkg package
entirely.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
QemuFwCfgS3Enabled() in "ArmVirtPkg/Library/QemuFwCfgLib/QemuFwCfgLib.c"
returns constant FALSE.
The same implementation is now available factored-out in
"OvmfPkg/Library/QemuFwCfgS3Lib/QemuFwCfgS3Base.c".
Resolve QemuFwCfgS3Lib to BaseQemuFwCfgS3LibNull.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=394
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Now that ARM has grown support for managing memory permissions in
ArmMmuLib, we can enable the non-executable DXE stack for all virt
platforms. Note that this includes the AARCH64 Xen platform as well.
Note that this is not [entirely] redundant: the non-executable stack
is configured before DxeCore is invoked. The image and memory protection
features configured during DXE only take affect when the CPU arch
protocol implementation is registered.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Recent changes to ShellPkg require a resolution for UefiBootManagerLib
for all platforms in ArmVirtPkg. So move the resolution to the shared
include ArmVirt.dsc.inc.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This removes the PCD PcdArmUncachedMemoryMask from ArmPkg, along with
any remaining references to it in various platform .DSC files. It is
no longer used now that we removed the virtual uncached pages protocol
and the associated DebugUncachedMemoryAllocationLib library instance.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
While debugging OS for ACPI BGRT support (especially on VMs),
it is very useful to have the EFI firmware to export the
ACPI BGRT table.
This patch tries to add this support in ArmVirtPkg.
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Bhupesh Sharma <bhsharma@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
One of the following patches will change QemuVideoDxe driver
to use the new FrameBufferLib.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek at redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The various ArmLib flavors are identical in practice, and a new
ArmBaseLib has been introduced that can replace all of them. So replace
all occurrences with ArmBaseLib.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Wire up the FdtPciHostBridgeLib introduced in the previous patch
to the generic PciHostBridgeDxe implementation, and drop the special
ArmVirtPkg version. The former's dependency on gEfiCpuIo2ProtocolGuid
is satisfied by adding ArmPciCpuIo2Dxe.inf as well, and adding the PCD
gArmTokenSpaceGuid.PcdPciIoTranslation as a dynamic PCD.
In terms of functionality, no changes are intended.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Ref: https://tianocore.acgmultimedia.com/show_bug.cgi?id=65
In ARM/AARCH64 guests that run on KVM, we can now use virtio-gpu-pci, so
PcdKludgeMapPciMmioAsCached is no longer necessary. Standard VGA continues
to work on TCG without the kludge.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://tianocore.acgmultimedia.com/show_bug.cgi?id=66
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
At this stage, the driver builds, and suffices for testing binding and
unbinding.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://tianocore.acgmultimedia.com/show_bug.cgi?id=66
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Since ArmVirt.dsc.inc is included in all the ArmVirt dsc files,
move inclusion of AcpiTableDxe.inf to ArmVirt.dsc.inc.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Vikas C Sajjan <vikas.cha.sajjan@hpe.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The clang developers have made a backward incompatible change to the
command line arguments, and have replaced '-mllvm -arm-use-movt=0'
with '-mno-movt'. This does not matter for most ARM platforms, and
therefore it has been removed from the default CLANG35/ARM CC flags
in patch 1c63516075 ("BaseTools CLANG35: drop problematic use-movt
and save-temps options"), but as it turns out, the relocatable PrePi
implementation used by ArmVirtQemuKernel and ArmVirtXen will fail to
build if it contains MOVT/MOVW pairs, due to the fact that these are
not runtime relocatable under ELF.
Since they are runtime relocatable under PE/COFF, and GenFw does the
right thing when encountering them, selectively controlling their
use is more appropriate than disabling them altogether. Therefore,
this patch adds the -mno-movt argument only for the platforms that
use the relocatable PrePi, and only for the module types that may
be pulled into its build.
In addition, switch to the SEC type version of ArmLib, so that
the relocatable PrePi only depends on BASE and SEC type libraries.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The platform ArmVirtQemuKernel is intended as an alternative for
ArmVirtQemu that only deviates in the way it is invoked by QEMU, either
from flash address 0x0 (the default ARM reset vector) or via the Linux
kernel boot protocol. So add VirtioRngDxe and HighMemDxe here as well.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The reasoning of patch 8e2efec6b206:
No ARM support for ACPI is planned under any OS we intend to run under
ArmVirtQemu-ARM, so remove the drivers from the ARM build.
applies equally to ArmVirtQemuKernel, so apply the same change there.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Switch all users of ArmLib that depend on the MMU routines to the new,
separate ArmMmuLib. This needs to occur in one go, since the MMU
routines are removed from ArmLib build at the same time, to prevent
conflicting symbols.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The Driver Health HII menu is not an integral part of the MdeModulePkg BDS
driver / UI app. Because we abandoned the IntelFrameworkModulePkg BDS in
the QEMU builds, now we have to get the same functionality explicitly from
DriverHealthManagerDxe.
Suggested-by: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Bruce Cran <bruce@cran.org.uk>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
[lersek@redhat.com: update commit message, drop Xen changes]
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Similar to how OVMF implements this, add a FD definition for the varstore
firmware volume and the FTW areas. The template was taken from the file
OvmfPkg/VarStore.fdf.inc, and subsequently modified to accommodate the
differences in NOR flash layout. This affects the FvLength, Checksum and
BlockMap[0] fields in the FV header, the Size field of the varstore header,
and the Crc and WriteQueueSize fields of the FTW header. The event log
region is not used by ArmVirtQemu, so it has been omitted.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
There is no longer a reason to use a different implementation of
NorFlashDxe for secure boot builds now that the varstore FV header can
carry either gEfiVariableGuid or gEfiAuthenticatedVariableGuid, and the
dependent code has been updated to deal with that. So move the secure
boot capable builds to the common NorFlashDxe.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
In the course of porting ArmVirtPkg to the MdeModulePkg BDS, commit
1f73aef50c
ArmVirtPkg/PlatformBootManagerLib: add EnableQuietBoot & DisableQuietBoot
open-coded the EnableQuietBoot() function (and its dependencies / friends)
from IntelFrameworkModulePkg BDS.
This code duplication can be avoided; the functionality is available from
the following three libraries in MdeModulePkg:
- BootLogoLib: provides the BootLogoEnableLogo() function. It does not
provide the internal ConvertBmpToGopBlt() function -- that one is
delegated to ImageDecoderLib (function DecodeImage()).
- ImageDecoderLib: a general library that registers decoder plugins for
specific image formats, and provides the generic DecodeImage() on top.
- BmpImageDecoderLib: one of said decoder plugins, for handling BMP images
(which is the format of our logo).
In this patch, we revert 1f73aef50c, and atomically incorporate the
above libraries. This is inspired by Nt32Pkg commit 859e75c4fc42:
Nt32Pkg: Use BootLogoLib for logo and progress bar drawing.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
This completes the transition to the new BDS.
The FILE_GUID in "QemuBootOrderLib.inf" is intentionally not changed.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gary Ching-Pang Lin <glin@suse.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
To support UEFI Secure Boot and the Linux persistent store with UEFI
variables, set PcdMaxVariableSize to 0x2000 bytes as is done in OvmfPkg.
For reference, the related Ovmf commits: 8cee3de72d441ca9
Also increase the maximum size for Authenticated variables in order to
handle a larger Signature List size as is done in OvmfPkg. Related Ovmf
commit: f5404a3e
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Linn Crosetto <linn@hpe.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Based on OvmfPkg commit 79c098b6d2.
Unlike in OVMF, no USE_OLD_BDS fallback is introduced; I think that
ArmVirtPkg is less widely used by non-developers than OvmfPkg.
ArmVirtXen is not modified, as it uses PlatformIntelBdsLib from
ArmPlatformPkg.
About this patch:
- DxeServicesLib and SortLib are resolved generally (they have broad
client module type lists).
- ReportStatusCodeLib is resolved for UEFI_APPLICATION modules.
- GenericBdsLib and PlatformBdsLib are replaced with UefiBootManagerLib
and PlatformBootManagerLib, and resolved from under MdeModulePkg and
ArmVirtPkg, respectively.
- QemuBootOrderLib is pointed to the QemuNewBootOrderLib instance.
- FileExplorerLib no longer depends on SECURE_BOOT_ENABLE, it is nedeed by
BootMaintenanceManagerUiLib, which we link into UiApp.
- PcdBootManagerMenuFile carries the FILE_GUID of
"MdeModulePkg/Application/UiApp/UiApp.inf". The default PCD value from
"MdeModulePkg/MdeModulePkg.dec" points to
"MdeModulePkg/Application/BootManagerMenuApp/BootManagerMenuApp.inf",
which, according to the commit that introduced it (a382952f82), only
'provides a very simple UI showing all the boot options recorded by
"BootOrder" and user can select any of them to boot'.
- Include the new core BDS driver, and include the boot manager
application, with the usual main menu entries.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Fixes: https://github.com/tianocore/edk2/issues/83
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ruiyu Ni <ruiyu.ni@Intel.com>
MdeModulePkg/BDS doesn't launch the UI (Boot Manager Menu) from the
platform side. The platform is expected to store the boot timeout only, in
PcdPlatformBootTimeOut. This is usually done in
PlatformBootManagerBeforeConsole().
(ArmVirtXen is not modified, as it uses PlatformIntelBdsLib from
ArmPlatformPkg, not ArmVirtPkg.)
The patch parallels OvmfPkg commit 8dc0f0a6aa.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ruiyu Ni <ruiyu.ni@Intel.com>
Now that we have moved the handling of the xen,xen DT node to XenioFdtDxe,
remove its handling from VirtFdtDxe. Since the only functionality that
remains is handling the virtio,mmio DT node, rename VirtFdtDxe to
VirtioFdtDxe to reflect that. Also update the platforms that use this
driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This moves QEMU based platforms to ArmVirtPL031FdtClientLib, so that we no
longer have to rely on VirtFdtDxe to execute first and set the PL031 base
address in a dynamic PCD.
The only driver which [transitively] depends on this PcdPL031RtcBase PCD is
EmbeddedPkg/RealTimeClockRuntimeDxe, so this conversion cannot affect any
other users and is thus safe.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Now that the PCI host bridge driver parses the DT node that describes
the PCI host bridge directly via the FDT client protocol, we can drop the
handling from VirtFdtDxe completely.
This means some PCI related PCDs are no longer set, such as PcdPciBusMin,
PcdPciBusMax, PcdPciIoBase, PcdPciIoSize, PcdPciIoTranslation,
PcdPciMmio32Base and PcdPciMmio32Size. Since these PCDs are specific to
ARM (and declared in ArmPlatformPkg), and not used anywhere else by the
ArmVirtPkg platforms, we can simply stop populating them, and drop all
references to them.
It also means that we can no longer rely on PcdPciDisableBusEnumeration
to be set before it is consumed by PciBusDxe and QemuFwCfgAcpiPlatformDxe,
so make those depend on FdtPciPcdProducerLib explicitly via NULL library
class resolution.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Make BaseCachingPciExpressLib depend on PciPcdProducerLib, so that we
have a chance to populate PcdPciExpressBaseAddress based on the contents
of the device tree.
Also update the platforms under ArmVirtPkg that support PCI to use the
special MAX_UINT64 value as the build time default for
PcdPciExpressBaseAddress.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Remove the handling of the fw_cfg DT node from VirtFdtDxe now that the
fw_cfg client library has been moved to the FDT client protocol, and no
longer relies on VirtFdtDxe to pass this information via dynamic PCDs.
Since the PCDs in question are now no longer used, remove them from the
various DEC and DSC files as well.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Move to the new dedicated ArmVirtTimerFdtClientLib to populate the
various timer related PCDs at driver load time rather than relying on
VirtFdtDxe to do it. Since ArmPkg/TimerDxe is the only consumer of these
PCDs, which is the DXE driver ArmVirtTimerFdtClientLib is intended to
complement, this conversion is guaranteed to be safe.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The detection of the PSCI method has been moved to the EfiResetSystemLib
implementation, so drop the handling from VirtFdtDxe. Since no users
remain of gArmVirtTokenSpaceGuid.PcdArmPsciMethod, remove that as well.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Now that we moved the GIC discovery to our ArmGicArchLib implementation,
we can remove it from VirtFdtDxe, since it is no longer used. Remove the
PcdArmGicRevision declaration and definitions as well: VirtFdtDxe no longer
sets it, and no other drivers consume its value.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Add FdtClientDxe to the various platforms under ArmVirtPkg, so that the
drivers we will update to depend on the FDT client protocol in subsequent
patches will remain in working order.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Now that FatPkg is open source (and therefore can be included in the
EDK II tree) we build and use it directly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Ard Biesheuvel
Laszlo Ersek
Paulo Alcantara
Nerijus Baliūnas
Bhupesh Sharma
Ruiyu Ni
Vikas C Sajjan
Bruce Cran
Linn Crosetto
Jordan Justen