When build option ABOVE_4G_MEMORY is set to true, nothing will change
and EDKII will use all available memory.
Setting it to false will create memory type information HOB in
payload entry, so that EDKII will reserve enough memory below 4G
for EDKII modules. This option is useful for bootloaders that are not
fully 64-bit aware such as Qubes R4.0.4 bootloader, Zorin and Proxmox.
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3754
1. DxeCore will use ModuleInfo to install LoadedImage protocol for DxeCore.
2. DxeIpl will create the ModuleInfo of UniversalPayload. and
UniversalPayload will create the ModuleInfo of DxeCore.
3. UniversalPayload should skip the ModuleInfo from the DxeIpl to avoid
the mismatched ModuleInfo for DxeCore.
Changes:
1. Use function IsHobNeed to check if the HOB should be added
2. Add the ModuleInfo check logic in IsHobNeed function
Signed-off-by: Guomin Jiang <guomin.jiang@intel.com>
Cc: Guo Dong <guo.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
The patch removes the dep on PcdUse5LevelPageTable.
Now the payload inherits the 5-level paging setting from
bootloader in IA-32e mode and uses 4-level paging in
legacy protected mode.
This fix the potential issue when bootloader enables 5-level paging
but 64bit payload sets 4-level page table to CR3 resulting CPU
exception because PcdUse5LevelPageTable is FALSE.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3737
Apply uncrustify changes to .c/.h files in the UefiPayloadPkg package
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
SystemTableInfo GUID is not a Spec defined GUID.
The latest SBL and CBL produces ACPI and SMBIOS table information.
So removing the SystemTableInfo GUID implementation.
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Guo Dong <guo.dong@intel.com>
Signed-off-by: Thiyagu Kesavan Balakrishnan <thiyagux.kesavan.balakrishnan@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Applied an old patch which caused non-universal payload build failed
since that code was added after the old patch.
This patch fixed the build failure.
Signed-off-by: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Reviewed-by: Zhiguang Liu <zhiguang.liu@intel.com>
V2: Fix more header files on #ifdef variable
ECC reported some issues on UefiPayloadPkg, this patch fixed
most of them except several files including ElfLib\Elf32.h,
coreboot.h, CbParseLib.c, etc.
It also removed unused functions in ResetSystemLib and Hob.c.
Signed-off-by: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Fixes simple typo, no behavioral change.
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Guo Dong <guo.dong@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Signed-off-by: Moritz Fischer <moritzf@google.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
V2: Fix GCC build issue.
There is typo in previous change caused coreboot build failure.
This patch fixed the build issue.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Signed-off-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Current UefiPayloadPkg can suport PCI root bridge info HOB
provided by bootloader. For UniversalPayload, bootloader can
directly provide this HOB for payload consumption. However,
for legacy UEFI payload, it is required to migrate the HOB
information from bootloader HOB space to UEFI payload HOB
space. This patch added the missing part for the bootloader
ParseLib in order to support both legacy and universal UEFI
payload.
This patch was tested on Slim Bootloader with latest UEFI
payload, and it worked as expected.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Guo Dong <guo.dong@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Remove asm code used for payload entry.
Use patchable PCD instead a fixed PCD PcdPayloadStackTop to avoid
potential conflict.
Based on the removal, use same HobLib regardless UNIVERSAL_PAYLOAD.
Use same PlatformHookLib regardless UNIVERSAL_PAYLOAD. The original
PlatformHookLib was removed and UniversalPayloadPlatformHookLib was
rename to new PlatformHookLib.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Signed-off-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
V2: Update BuildHobFromAcpi() to return a HOB pointer.
For universal UEFI payload, build a HOB from the ACPI table, so that
other modules could use this info from HOB at very early DXE phase.
This code are shared by universal payload and non universal payload.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Guo Dong <guo.dong@intel.com>
V1: Dump this hob infomation from gEdkiiBootManagerMenuFileGuid
V2: Delete the duplicated assertions
V3: Add input parameter in Comment
Cc: Guo Dong <guo.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Reviewed-by: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Dun Tan <dun.tan@intel.com>
The input HobLength of PrintHandler should be data size instead of whole length of HOB
Cc: Guo Dong <guo.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Reviewed-by: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Dun Tan <dun.tan@intel.com>
UefiPayloadEntry's AllocatePool() applies the "sizeof" operator to
HOB index rather than the HOB header structure. This yields 4 Bytes
compared to the 8 Bytes the structure header requires. Fix the call
to allocate the required space instead.
Reviewed-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Vitaly Cheptsov <vit9696@protonmail.com>
Signed-off-by: Marvin H?user <mhaeuser@posteo.de>
Fix the non-ascii character in UniversalPayloadEntry.c
Cc: Guo Dong <guo.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Signed-off-by: DunTan <dun.tan@intel.com>
V1:
Universal Payload will consume Hobs from boot loader.
Dump all hobs in the Universal Payload entry.
V2:
Add function comments
V3:
minor change, for example Hobsize -> HobLength, SMBiosTable -> SmBiosTable
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Signed-off-by: Thiyagu Kesavan Balakrishnan <thiyagux.kesavan.balakrishnan@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
For non-universal payload, HandoffHobTable is used without initialization.
This patch fixed this failure.
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Signed-off-by: Guo Dong <guo.dong@intel.com>
Edk2 bootloader will pass the pei pcd database, and UPL also contain a
PCD database.
Dxe PCD driver has the assumption that the two PCD database can be
catenated and the local token number should be successive。
This patch will manually fix up the UPL PCD database to meet that
assumption.
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Guo Dong <guo.dong@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
From gUniversalPayloadExtraDataGuid Guid Hob, get the Dxe FV information,
and get the Dxe Core from the FV.
Also, make sure if there are muliple FV hob, the FV hob pointing to this FV
will be the first in the hob list.
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Guo Dong <guo.dong@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
This patch create the UniversalPayload Entry based on the UefiPayload
Entry. It implements the logic to find a proper memory range to create the
new Hob and migrate the Hobs from Bootloader.
To make the change history clear, the logic to get the DxeCore will be in
the next patch.
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Guo Dong <guo.dong@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
Update the function defination of HobConstructor to align the Phit Hob
structure.
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Guo Dong <guo.dong@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
Previous it would hang in CpuDxe if DXE drivers are dispatched above 4GB.
Now remove the work around since the fixed in CpuDxe are merged.
Signed-off-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Currently several DXE crash due to invalid memory resource settings.
The PciHostBridgeDxe which expects the MMCONF and PCI Aperature
to be EfiMemoryMappedIO, but currently those regions are (partly)
mapped as EfiReservedMemoryType.
coreboot and slimbootloader provide an e820 compatible memory map,
which doesn't work well with EDK2 as the e820 spec is missing MMIO regions.
In e820 'reserved' could either mean "DRAM used by boot firmware" or "MMIO
in use and not detectable by OS".
Guess Top of lower usable DRAM (TOLUD) by walking the bootloader provided
memory ranges. Memory types of RAM, ACPI and ACPI NVS below 4 GiB are used
to increment TOLUD and reserved memory ranges touching TOLUD at the base
are also assumed to be reserved DRAM, which increment TOLUD.
Then mark everything reserved below TOLUD as EfiReservedMemoryType and
everything reserved above TOLUD as EfiMemoryMappedIO.
This fixes assertions seen in PciHostBridgeDxe.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
From SysTableInfo Hob, get ACPI table address, and create
gUniversalPayloadAcpiTableGuid Hob to store it.
Remove directly adding ACPI table to ConfigurationTable.
Dxe ACPI driver will parse it and install ACPI table from Guid Hob.
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Guo Dong <guo.dong@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Tested-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
From SysTableInfo Hob, get Smbios table address, and create
gUniversalPayloadSmbiosTableGuid Hob to store it. Remove directly adding
smbios table to ConfigurationTable.
Dxe module SmbiosDxe will parse it and install smbios table from it.
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Guo Dong <guo.dong@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Tested-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3100
It is not necessary to have a PEI phase in the UEFI payload since no
specific PEI task is required. This patch adds a UefiPayloadEntry
driver to get UEFI Payload required information from the bootloaders,
convert them into a HOB list, load DXE core and transfer control to it.
Here is the change details:
1) Removed PEI phase, including Peicore, BlSupportPei, SecCore, etc.
2) Added UefiPayloadEntry driver. this is the only driver before DXE core.
3) Added Pure X64 support, dropped Pure IA32 (Could add later if required)
64bit payload with 32bit entry point is still supported.
4) Use one DSC file UefiPayloadPkg.dsc to support X64 and IA32X64 build.
Removed UefiPayloadIa32.dsc and UefiPayloadIa32X64.dsc
Tested with SBL and coreboot on QEMU.
Signed-off-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Benjamin You <benjamin.you@intel.com>
Sean Rhodes
Jiang, Guomin
Ni, Ray
Michael Kubacki
Kesavan Balakrishnan, ThiyaguX
Guo Dong
Ma, Maurice
duntan
Marvin H?user
Liu, Zhiguang
Patrick Rudolph