In Ip4CleanService()it first cleaned some resources, then stop the timer .
While before the timer stopped it may try to access some already freed
data, which may generate an exception.
This patch updates the driver to stop the timer event before starting to
clean up the service data.
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Subramanian Sriram <sriram-s@hpe.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Git version '3d0a49ad' commit provided a scenario to resolve the
performance issue for IPv4, but it's not workable for IPv6. To
avoid IPv4 and IPv6 inconsistency, we decided to revert that version
fix.
If so, the default policy for Ip4Config2 is Ip4Config2PolicyDhcp,
which results in all NIC ports attempting DHCP. So, this patch is
used to changes the the default IPv4 config policy to
Ip4Config2PolicyStatic and also defer the SetData operation after
Ip4Config2Protocol installed. This update let the other platform
drivers have chance to change the default config data by consume
Ip4Config2Protocol.
Cc: Subramanian Sriram <sriram-s@hpe.com>
Cc: El-Haj-Mahmoud Samer <samer.el-haj-mahmoud@hpe.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Subramanian Sriram <sriram-s@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Modified the logic in Ip4Dxe and Ip6Dxe to not locate EFI_IPSEC2_PROTOCOL on each
message transmit/receive. Instead, register a callback in the drivers entry points
on the IpSec protocol installation, and process only if the protocol is installed.
This speeds up the network stacks when IpSec is not installed since there is a
penalty associated with searching the entire handle database on each packet processing.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <samer.el-haj-mahmoud@hp.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18365 6f19259b-4bc3-4df7-8a09-765794883524
Ip4StartAutoConfig() will always free its default router table and interface,
which may cause IP instance missing its correct default interface. e.g. when
the policy is dhcp, and one child is configured to use default address.
Cc: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviwed-by: Ye Ting <ting.ye@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18245 6f19259b-4bc3-4df7-8a09-765794883524
v2:
* Update the MediaPresent detect declaring.
IP4 driver should re-initiate a DHCP if it detects that there is a network.
To fix this issue, we can implement the DHCP re-initiate policy while the media
change detected. The Ip4 driver should set a timer to signal the Ip4 to run the
DHCP configuration again(D.O.R.A). IP4 driver should free old IP address related
resource, then initiate a DHCP process to acquire new IP.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Zhang Lubo <lubo.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Lubo Zhang <lubo.zhang@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18232 6f19259b-4bc3-4df7-8a09-765794883524
and also add new UI configuration support in Ip4Dxe driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: jiaxinwu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17853 6f19259b-4bc3-4df7-8a09-765794883524
2. Fix the driver binding Stop() hang issue in the network stack.
3. Add Ip4 raw data support.
4. Add iSCSI Dhcp option 60 support.
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Ouyang Qian <qian.ouyang@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13995 6f19259b-4bc3-4df7-8a09-765794883524
2. Retrieve the IP information after iSCSI TCPv6 connection established and fill it into iBFT table.
3. Generate a random IAID for each NIC port to require different IPv6 address in PXE driver.
4. Update function EfiMtftp6Configure() and Mtftp6RrqHandleOack() to allocate at most one UdpIo.
5. Fix a typo from “destory” to “destroy” in network code.
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Ouyang Qian <qian.ouyang@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13859 6f19259b-4bc3-4df7-8a09-765794883524
2. Integrate IPsec functionality to IP4 driver.
3. Move IP_VERSION_4/IP_VERSION_6 definition from IpIoLib to NetLib.
4. Move the Ip6/Udp6 protocol declaration from driver INF to Library INF (DxeIpIoLib and DxeUdpIoLib) for better readability.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9413 6f19259b-4bc3-4df7-8a09-765794883524
2. Add DpcDxe module and DxeDpcLib module in MdeModulePkg
3. Port network stack module to use DPC.
4. Use MIN, and MAX defined in MdePkg to replace NET_MIN and NET_MAX.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@4307 6f19259b-4bc3-4df7-8a09-765794883524
Fu, Siyuan
Jiaxin Wu
Samer El-Haj-Mahmoud
Fu Siyuan
sfu5
niruiyu
hhuan13
hhtian
vanjeff
xdu2
tye
jgong5
jji4
qhuang8