if we set a static IP using command
'ifconfig -s eth0 static 192.168.0.121 255.255.255.0 0.0.0.0'
The system says 'Failed to set address.' but using
'ifconfig -l', the static IP can be assigned successfully.
so we need to check the gateway validity before setting manual
address to keep the ifconfig -s command more consistent.
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Santhapur Naveen <naveens@amiindia.co.in>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=345
When I am adding SMBIOS spec 3.1.0 support, I found the decoding
of SMBIOS spec 3.0.0 for some definitions is missing.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=344
SlotType AGP8X was added in SMBIOS spec 2.3.4, but the decoding
of it is missing. I found it when I am adding SMBIOS spec 3.1.0
support.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
When we issue 'ifconfig6 -s <interface> auto' system hangs with
an ASSERT in StrLen. in IfConfig6SetInterfaceInfo, for 'auto' case
we added checks to rule out the invalid inputs like 'host', 'gw'
and 'dns'. To parse through this, we do a VarArg = VarArg->Next but
we dont check new VarArg before calling StrCmp. Fix with a check
in this patch.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Added decoding of the new SMBIOS Type 43 record.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Augustine Linson P <linson.augustine@hpe.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The smbiosview command was not displaying SMBIOS Type 3 Height, NumberofPowerCords, or SKU Number.
Added handling to display these values.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chris Phillips <chrisp@hpe.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
To follow Shell spec 2.2, change "dh" to support dump from
protocol GUID and support "decode" parameter to dump the
GUID/name mapping.
Contributed-under: TianoCore Contribution Agreement 1.0
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
When "fs0:dir"(drive letter without slash) is used as destination
of "cd", "cd" tries to change to "dir" in root directory of "fs0:".
It's incorrect. The correct behavior is to change to "dir" in
current directory of "fs0:"
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Since the type of ShellStatus is SHELL_STATUS, we should use
SHELL_INVALID_PARAMETER instead of EFI_INVALID_PARAMETER.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Lin <glin@suse.com>
Cc: Zhang Lubo <lubo.zhang@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
v2: update the prompt message more readable.
It should display error prompt message when Ifconfig6 can
not configure correctly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed by : Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
When user types "mv -r fs0:\A\ fs1:\" under directory
"fs0:\A\B\", MV command should deny such movement.
The patch fixes the above issue.
It also denies moving current directory.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
This patch update the shell ping command to use timer service to calculate the
RTT time, instead of using the timer arch protocol.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Ni Ruiyu <ruiyu.ni@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
The patch adds the "-sfo" support to "dmpstore" command.
When -l or -d is specified, -sfo is not supported.
When the variable specified by name and GUID cannot be found,
an error message is displayed; Otherwise, the SFO is displayed.
E.g.: "dmpstore -guid GuidThatDoesntExist -sfo" produces output
as:
ShellCommand,"dmpstore"
VariableInfo,"","GuidThatDoesntExist","","",""
"dmpstore NameThatDoesntExist -guid GuidThatDoesntExist -sfo"
produces output as:
ShellCommand,"dmpstore"
dmpstore: No matching variables found. Guid GuidThatDoesntExist, Name
NameThatDoesntExist
The difference between the above 2 cases is that former one only
specifies the GUID, but the latter one specifies both name and GUID.
Since not specifying GUID means to use GlobalVariableGuid,
"dmpstore NameThatDoesntExist -sfo" produces the similar output as
latter one.
I personally prefer to always produce SFO output for both cases.
But the above behavior is the discussion result between HPE engineers.
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Tapan Shah <tapandshah@hpe.com>
DumpHex() and CatSDumpHex() are public library APIs but don't have
EFIAPI modifier. Add the missing EFIAPI.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
'Ping6 TargetIp' is a valid command input but we bail out
when TargetIp is a link local address because we would want
the user to specify the NIC (via SourceIp) through which
he/she would want to ping to TargetIp. This patch updates
the help text to mention the same.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The patch adds "-fwui" support to reset command which is newly added
to Shell 2.2 spec.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
When copy command prompts to overwrite an existing file, pressing
backspace continuously removes everything including the shell prompt.
So print only valid characters for file overwrite prompt.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The ping command uses PI CPU arch protocol to calculate the RTT time, which is
not allowed to use in UEFI shell. This patch updates it to use the UEFI timer
event and Stall service to estimate the system timer period.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hegde, Nagaraj P <nagaraj-p.hegde@hpe.com>
'-t or -terse' and '-s' flags are multiple exclusive
So when both flags are used together, command should report an error message.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The more proper place for macro SHELL_FREE_NON_NULL is ShellLib.h
instead of ShellBase.h.
Modify Compress.c to resolve build failure due to this change.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Clear up some help text for the TFTP shell command
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Thomas Palmer <thomas.palmer@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Allows cd command to go back to the root directory when 'cd \' executed in system.
This change prevents last PathRemoveLastItem() call which truncates '\' from 'fs0:\'
in desired root path which is required to set CWD to the root directory.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hpe.com>
Reviewed-by: Jaben Carsey <Jaben.carsey@intel.com>
In ShellOpenFileByName() the file is opened using
gEfiShellProtocol->OpenFileByName().
It is supposed that if this call returns an EFI_ERROR, the function
should return that error immediately. However, this return was missing,
and if UnicodeCollationProtocol has not been located by this time, the
Status gets overwritten with LocateProtocol() call result, which
eventually erroneously returns EFI_SUCCESS to the Shell.c, and this
leads to attempt to execute a non-existent startup script, which fails,
and which in turn leads to Shell being unloaded with "Invalid parameter"
error. This patch fixes the bug.
Cc: Tapan Shah <tapandshah@hpe.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
Reviewed-by: Tapan Shah <tapandshah@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The HDiskImageSave() function copies a device path using
DuplicateDevicePath() and passes that device path to
gBS->LocateDevicePath() that changes the value of the
device path pointer. When FreePool() is called with the
modified device path pointer, the FreePool() service
generates an ASSERT() because the signature for the pool
head can not be found.
The function HDiskImageRead() immediately above
HDiskImageSave() has the correct algorithm that uses an
additional local variable called DupDevicePathForFree to
preserve the pointer to the allocated buffer so it can
be used in the call to FreePool().
Bug: <https://bugzilla.tianocore.org/show_bug.cgi?id=131>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <Jaben.carsey@intel.com>
As per ECR 1416 change in UEFI Shell Specification 2.2,
enhancing 'cls' command to change the background color as well as
foreground color. Also add support to display current settings
using 'cls -sfo' command.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Zhang Lubo
Star Zeng
hegdenag
Linson Augustine
Chris Phillips
Ruiyu Ni
Chen A Chen
Dandan Bi
Gary Lin
Tapan Shah
Laszlo Ersek
Fu Siyuan
Thomas Palmer
Vladimir Olovyannikov
Michael Kinney