some were populated, but never used after.
some were never used.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
As we never use the values, just keep the keys in a set.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
switch list to set:
1)we dont care about order
2)we only check for membership.
then remove ".keys()" from dict looping:
allow generators opportunity to optimize
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
by changing from list to set(), we can skip all the preprocessing
to prevent duplication and we dont need to convert to a set() later
on for each use
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Option --hash --binary-destination generate Binaries section in
the inf file, but the path of ASL file is begin with
Output directory, so need replace Output directory with '',
will get the file name RamDisk.aml
Incorrect AML file path in inf file on linux:
[Binaries.X64]
PE32|RamDiskDxe.efi
ASL|home/tiano/Desktop/hash/edk2/Build/OvmfX64/RELEASE_GCC5/X64
/MdeModulePkg/Universal/Disk/RamDiskDxe/RamDiskDxe/OUTPUT/RamDisk.aml
DXE_DEPEX|RamDiskDxe.depex
BIN|RamDiskDxeOffset.bin
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yunhua Feng <yunhuax.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
1. Handle the Pcd maxsize issue for the case
that the length of Pcd value from CommandLine
bigger that its maxsize
2. The Pcd value override in commandline.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The case is: define a VOID* pcd in DEC file, eg: Value is {0x1}.
then override this PCD on DSC component section, eg: Value is
{0x1, 0x2, 0x3}, the max size of this PCD is calculate wrong
which cause build error.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The issue that *_*_*_MAKE_FLAGS doesn't work in DSC [BuildOptions]
section. It means MAKE flags can't be set in platform DSC file.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The VPD size is incorrect if that VPD is not used in Module.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Feng Bob C <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
1. The structure pcd default value should use the default value under sku.
2. Incorrect VpdOffset value for those un-used in module Vpd
3. Add a checkpoint for Structure Pcd Name
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Previous build tool will display "processing meta-data ..." to let user
know the progress. this Patch add this string back.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
DynamicHiiPcd may be used by PEIM or DXE driver.
All used DynamicHiiPcd value should be collected and placed into
the default setting PCD PcdNvStoreDefaultValueBuffer.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
When multiple skus are enabled, PCD database should record the supported SKUs.
This patch fixes PCD database to add the missing supported SKUs.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@Intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
If VPD PCD value is same in the different SKUs, the different SKUs will
save the same offset for this PCD in VPD region. That means there is only
one PCD value copy in VPD region to save VPD space.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Feng Bob C <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=546
BaseTools will generate the optimized PCD database to save the image size
at build time for multiple SKUs. The optimized PCD database layout will be like
below, the PCD database will be composed of the full default SKU data
(PCD_DATABASE_INIT) and the non-default SKU delta data(PCD_DATABASE_SKU_DELTA).
PCD driver will build HOB to store the full default SKU data, and patch HOB
data based on non-default SKU delta data for the SKU set by SetSku(),
it can save memory resource at boot time.
//
// PCD database layout:
// +---------------------------------+
// | PCD_DATABASE_INIT (DEFAULT SKU) |
// +---------------------------------+
// | PCD_DATABASE_SKU_DELTA (SKU A) |
// +---------------------------------+
// | PCD_DATABASE_SKU_DELTA (SKU B) |
// +---------------------------------+
// | ...... |
// +---------------------------------+
//
BaseTools, PCD database and driver updates are needed for this proposal.
For single SKU (default) case, this proposal is expected to have no impact.
For multi-SKU case, PCD database format will be changed.
So, PcdDataBase Version is also updated from 6 to 7.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Feng Bob C <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=543
Structure PCD field value can inherit between the different SKUIds.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Feng Bob C <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=661
Collect all DynamicHii and DynamicExHii PCD value into PCD
PcdNvStoreDefaultValueBuffer, then firmware can access this PCD value
to get the variable default setting.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Feng Bob C <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=542
This is pure BaseTools enhancement to support PCD with one structure.
User can specify PCD value based on its structure field.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
V2: change to use InfBuildData but not ModuleAutoGen
We meet the case that first build with --hash option, then build it
again with --hash and --binary-destination option, since the hash value
is same, tool will not build the driver again, it cause the binary
files are not backed up.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
We don't need cache the .efi file location into build option, otherwise
when we change the --binary-destination location, it would cause the
hash value is different.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
when collect source files list we should also consider build rule
family. BuildRuleFamily may be set to the different one. It will
impact BuildRule and source files in INF file.
Fixes: https://bugzilla.tianocore.org/show_bug.cgi?id=780
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The root cause is Module's self.CanSkip() is before LibraryAutoGen,
then when a uni file of library is changed, Module's self.CanSkip() is
still true which cause the library is not regenerated.
This patch change Module's self.CanSkip() after LibraryAutoGen.
Fixes: https://bugzilla.tianocore.org/show_bug.cgi?id=759
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The bug is for build output files it still use mws.join function, it
cause maybe we will get the build output files in the PACKAGES_PATH
because mws.join will try WORKSPACE first, if the file doesn't exist
then try PACKAGES_PATH. But for build output, we expected it should
relative to WORKSPACE.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add three new options:
--hash enables hash-based caching during build process. when --hash is
enabled, build tool will base on the module hash value to do the
incremental build, without --hash, build tool will base on the
timestamp to do the incremental build. --hash option use md5 method to
get every hash value, DSC/FDF, tools_def.txt, build_rule.txt and build
command are calculated as global hash value, Package DEC and its
include header files are calculated as package hash value, Module
source files and its INF file are calculated as module hash value.
Library hash value will combine the global hash value and its dependent
package hash value. Driver hash value will combine the global hash
value, its dependent package hash value and its linked library hash
value.
When --hash and --binary-destination are specified, build tool will
copy generated binary files for each module into the directory specified
by binary-destination at the build phase. Binary-destination directory
caches all generated binary files.
When --hash and --binary-source are specified, build tool will try to
get the binary files from the binary source directory at the build
phase.If the cached binary has the same hash value, it will be directly
used. Otherwise, build tool will compile the source files and generate
the binary files.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
In the build report, we add AutoGen Phase, Make Phase and GenFds Phase
time duration in the Platform Summary section, and we also add a item
in Module section to display module and library's build time.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
the case is that override the mixed pcd value in DSC [Components]
section, the value display in the report is incorrect.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Per build spec to update the tool to copy "TianoCore" userextensions to
As Built INF file.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Current the "MODULE_UNI_FILE" item defined in the [Defines] section will
be copied into As Built INF file, but tool doesn't copy the real file into
same directory with the As Built INF file.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Fix a Incremental build failure. The case is: Both A and B package will
include a same .h file, and in the driver's packages section, A
package is listed before B package, so we will use the .h file in the A
package and build success, then we directly delete the .h file in package
A, it cause increment build failure since in the AutoGenTimeStamp file
the .h file in A can't be found.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Carsey, Jaben
Feng, YunhuaX
BobCF
Yonghong Zhu
Yunhua Feng
Liming Gao