Bugzilla: 3045 (https://bugzilla.tianocore.org/show_bug.cgi?id=3045)
Add a new parser for the Heterogeneous Memory Attribute Table. The
parser also validates some fields for this table.
The HMAT table is used to describe the memory attributes such as memory
side cache attributes and bandwidth and latency details related to
memory proximity domains. The info in the HMAT table can be used by an
operating system for optimisation.
Signed-off-by: Marc Moisson-Franckhauser <marc.moisson-franckhauser@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Tested-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Bugzilla: 3048 (https://bugzilla.tianocore.org/show_bug.cgi?id=3048)
Add a new parser for the Arm Error Source Table (AEST) described in
the ACPI for the Armv8 RAS Extensions 1.1 Platform Design Document,
dated 28 September 2020.
(https://developer.arm.com/documentation/den0085/0101/)
AEST enables kernel-first handling of errors in a system that supports
the Armv8 RAS extensions. It covers Armv8.2+ RAS extensions for PEs
and the RAS system architecture for non-PE system components.
Signed-off-by: Marc Moisson-Franckhauser <marc.moisson-franckhauser@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Define a new command line parameter '-r' to enable checking if all
mandatory ACPI tables listed in a specification are present.
The -r parameter takes an integer value to specify which specification
the validation should be performed against.
The parameter is used to set two Acpiview variables. An interface to
access these variables is implemented in this patch.
The new functionality is aimed at Arm-based platforms, however,
there are no restriction on extending it to other architectures.
For the 32-bit and 64-bit Arm architectures, the possible values for
the -r parameter are:
0: Arm Server Base Boot Requirements 1.0, March 2016
1: Arm Server Base Boot Requirements 1.1, May 2018
2: Arm Server Base Boot Requirements 1.2, September 2019
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Sami Mujawar <Sami.Mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Make the -h command line option a binary flag. Now, colour
highlighting is enabled whenever this flag is set (stateless),
instead of being dependent on previous acpiview command
invocations.
By removing the parameter required with the -h flag the command
line parsing logic becomes simpler.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
According to the acpiview documentation, the -v flag enables verbose
output and it is set on default.
Moreover, the acpiview UEFI shell tool dumps the same output with
and without this flag set.
Therefore this patch removes the superfluous -v flag from allowed
command line parameters.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The current documentation for the acpiview UEFI shell tool states
that the '-c' flag enables consistency checks on ACPI table data.
However, these checks are enabled anyway by default.
This patch keeps ACPI table validation as a default option, but it
makes it possible to turn ACPI table validation off by setting the
newly-introduced '-q' flag. Consequently, the '-c' flag is removed.
The remaining code changes in this patch make a number of consistency
checks optional (but enabled by default):
1. ACPI table field offset mismatch.
2. ACPI table field validation functions provided in the ACPI_PARSER
arrays.
3. Table checksum computation.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1153
The '-s' option of 'acpiview' do not support multiply invcation options.
So clarify it for users.
Modify the help decription for UefiShellAcpiViewCommandLib which the
description is equal or over 80 column. If the line include equal or over
80 characters. The display engine would display a blank line for those
equal 80 characters or a extra line with few words for those over 80
character. So it is better to keep each line less than 80 characters.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1146
Add DSDT and SSDT description in the help information. Depend
on the implement of UefiShellAcpiViewCommandLib, the "acpiview"
command support to show all present type in the system not only
support the listed type in the help information. So change the
help information of this command.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Added the acpiview parser for the PPTT table.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
This program is provided to allow examination of ACPI table contents
from the UEFI Shell. This can help with investigations, especially at
that stage where the tables are not enabling an OS to boot.
The program is not exhaustive, and only encapsulates detailed knowledge
of a limited number of table types.
Default behaviour is to display the content of all tables installed.
'Known' table types will be parsed and displayed with descriptions and
field values. Where appropriate a degree of consistency checking is
done and errors may be reported in the output.
Other table types will be displayed as an array of Hexadecimal bytes.
To facilitate debugging, the -s and -d options can be used to generate a
binary file image of a table that can be copied elsewhere for
investigation using tools such as those provided by acpica.org. This is
especially relevant for AML type tables like DSDT and SSDT.
The inspiration for this is the existing smbiosview Debug1 Shell
command.
Many tables are not explicitly handled, in part because no examples are
available for our testing.
The program is designed to be extended to new tables with minimal
effort, and contributions are invited.
Change-Id: Ifa23dc80ab8ab042c56e88424847e796a8122a7c
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Marc Moisson-Franckhauser
Krzysztof Koch
Zhichao Gao
Michael D Kinney
Ruiyu Ni