Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3704
build -a X64 -t CLANG38 -b RELEASE -p OvmfPkg/OvmfPkgX64.dsc
results in
UDK/MdeModulePkg/Library/UefiBootManagerLib/BmBoot.c:1284:31:
error: variable 'Status' set but not used
[-Werror,-Wunused-but-set-variable]
Signed-off-by: Mikhail Krichanov <krichanov@ispras.ru>
MdePkg/DebugLib(PerformanceLib): Fix "unused-but-set-variable" warning
The current definitions of DEBUG_CODE_BEGIN() and DEBUG_CODE_END() use
the local
variable __DebugCodeLocal as an attempt to track parity. If
DEBUG_CODE_END() is
used without a preceding DEBUG_CODE_BEGIN(), __DebugCodeLocal will not
have been
declared and a compilation error will be issued. The mutations of the
variable
are not used to track nesting or such. As the value of this variable is
never
actually used, recent Clang versions issue a "unused-but-set-variable"
warning
for it.
To solve this, re-define __DebugCodeLocal as a BOOLEAN that is always
FALSE and
use it in a do-while loop condition as done explicitly in many places.
Like the
previous solution, DEBUG_CODE_END() cannot be used without
DEBUG_CODE_BEGIN(),
as __DebugCodeLocal will be not have been defined.
Signed-off-by: Marvin Häuser <mhaeuser@posteo.de>
Adds a Pedro Falcato's UEFI EXT4 filesystem driver that implements the EFI_FILE_PROTOCOL and EFI_SIMPLE_FILE_SYSTEM_PROTOCOL.
Signed-off-by: Savva Mitrofanov <savvamtr@gmail.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4438
The main dispatch loop in PeiDispatcher() goes through each FV and
calls DiscoverPeimsAndOrderWithApriori() to search Apriori file to
reorder all PEIMs then do the PEIM dispatched.
DiscoverPeimsAndOrderWithApriori() calculates Apriori file count for
every FV once and set Private->AprioriCount, but Private->AprioriCount
doesn't be set to 0 before dispatch loop walking through the next FV.
It causes the peim which sort on less than Private->AprioriCount and
depex is not satisfied would be dispatched when dispatch loop go through
to a scaned FV, even the peim is not set in APRIORI file.
Cc: Leon Chen <leon.chen@insyde.com>
Cc: Tim Lewis <tim.lewis@insyde.com>
Reported-by: Esther Lee <esther.lee@insyde.com>
Signed-off-by: Wendy Liao <wendy.liao@insyde.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
The helper that updates live page table entries writes a zero entry,
invalidates the covered address range from the TLBs, and finally writes
the actual entry. This ensures that no TLB conflicts can occur.
Writing the final entry needs to complete before any translations can be
performed, as otherwise, the zero entry, which describes an invalid
translation, may be observed by the page table walker, resulting in a
translation fault. For this reason, the final write is followed by a DSB
barrier instruction.
However, this barrier will not stall the pipeline, and instruction
fetches may still hit this invalid translation, as has been observed and
reported by Oliver. To ensure that the new translation is fully active
before returning from this helper, we have to insert an ISB barrier as
well.
Reported-by: Oliver Steffen <osteffen@redhat.com>
Tested-by: Oliver Steffen <osteffen@redhat.com>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Acked-by: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
- edk2-pytool-library: 0.14.0 to 0.14.1
- edk2-pytool-extensions: 0.21.8 to 0.23.2
- edk2-basetools: 0.1.43 to 0.1.48
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Rebecca Cran <rebecca@bsdio.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
If the SerialPortLib had any initialization needed, this
would be skipped in the RiscVVirt Sec. Follow the example
seen elsewhere (ArmVirtPkg PrePi).
Seen with BaseSerialPortLibRiscVSbiLibRam not using DBCN in Sec,
yet using DBCN elsewhere.
Cc: Daniel Schaefer <git@danielschaefer.me>
Signed-off-by: Andrei Warkentin <andrei.warkentin@intel.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
These are implementations of SerialPortLib using SBI console services.
- BaseSerialPortLibRiscVSbiLib is appropriate for SEC/PEI (XIP)
environments
- BaseSerialPortLibRiscVSbiLibRam is appropriate for PrePI/DXE
environments
Tested with:
- Qemu RiscVVirt (non-DBCN case, backed by UART)
- TinyEMU + RiscVVirt (non-DBCN case, HTIF)
- TinyEMU + RiscVVirt (DBCN case, HTIF)
Cc: Daniel Schaefer <git@danielschaefer.me>
Cc: Sunil V L <sunilvl@ventanamicro.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Andrei Warkentin <andrei.warkentin@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Add a few more definitions and make SbiCall and TranslateError
usable (not static) by library users.
Cc: Daniel Schaefer <git@danielschaefer.me>
Signed-off-by: Andrei Warkentin <andrei.warkentin@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
After moving BDS driver to a new FV for universal UEFI payload,
the shell boot option path is not correct since it used the BDS
FV instead of DXE FV in its device path.
This patch would find the correct FV by reading shell file.
It also removed PcdShellFile by using gUefiShellFileGuid.
Signed-off-by: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Cc: James Lu <james.lu@intel.com>
Cc: Gua Guo <gua.guo@intel.com>
Reviewed-by: James Lu <james.lu@intel.com>
Reviewed-by: Gua Guo <gua.guo@intel.com>
Reviewed-by: Mike Maslenkin <mike.maslenkin@gmail.com>
Update reviewers and maintainers for FdtLib.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Benny Lin <benny.lin@intel.com>
Cc: Gua Guo <gua.guo@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
Cc: James Lu <james.lu@intel.com>
Signed-off-by: Guo Gua <gua.guo@intel.com>
Reviewed-by: Benny Lin <benny.lin@intel.com>
Reviewed-by: Gua Guo <gua.guo@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: James Lu <james.lu@intel.com>
The warnings Clang emits when enabling -Wunneeded-internal-declaration
(which is part of -Wall) are generating false positives for variables
whose size gets taken but are not referenced beyond yet.
This may happen legitimately in debug code, so let's disable this
warning for Clang, rather than tiptoe around it in the code.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Rebecca Cran <rebecca@bsdio.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
When using CLANGDWARF to build for the ARM architecture, objcopy is
references via the wrong environment variable, resulting in the wrong
llvm-objcopy to be used (if one exists), or the build to fail (if
CLANGDWARF_BIN points to the only available instance)
So use CLANGDWARF_BIN instead, which was what was intended.
Fixes: ecbc394365f50f3c ("BaseTools: Set CLANGDWARF RC path ...")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Rebecca Cran <rebecca@bsdio.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3805
Replace hardcoded SMBIOS Anchor string and size with defines.
Fix buffer overflow as described below.
Smbios64BitPrintEPSInfo () is coded like:
UINT8 Anchor[5];
MemToString (Anchor, SmbiosTable->AnchorString, 5);
But the definition of MemToString()
Copy Length of Src buffer to Dest buffer,
add a NULL termination to Dest buffer.
So Anchor needs to be +1 the size of the SMBIOS Anchor string `_SM3_`.
Changes from v1 to v2:
- Replace doxygen style inline comments
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Andrew Fish <afish@apple.com>
Signed-off-by: Giri Mudusuru <girim@apple.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
This adds more definitions for the IPMI Get System Interface
Capabilities command.
Signed-off-by: Tinh Nguyen <tinhnguyen@os.amperecomputing.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Abner Chang <abner.chang@amd.com>
Reviewed-by: Abner Chang <abner.chang@amd.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Update reviewers and maintainers for TraceHubDebugSysTlib.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Signed-off-by: Guo Gua <gua.guo@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: K N Karthik <karthik.k.n@intel.com>
Reviewed-by: Chan Laura <laura.chan@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4144
This Library provides API to dump Trace Hub message.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Guo Gua <gua.guo@intel.com>
Cc: Chan Laura <laura.chan@intel.com>
Cc: Prakashan Krishnadas Veliyathuparambil <krishnadas.veliyathuparambil.prakashan@intel.com>
Cc: K N Karthik <karthik.k.n@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Guo Gua <gua.guo@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: K N Karthik <karthik.k.n@intel.com>
Reviewed-by: Chan Laura <laura.chan@intel.com>
Acked-by: Liming Gao <gaoliming@byosoft.com.cn>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4144
This Library is NULL library of TraceHubDebugSysTLib.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Guo Gua <gua.guo@intel.com>
Cc: Chan Laura <laura.chan@intel.com>
Cc: Prakashan Krishnadas Veliyathuparambil <krishnadas.veliyathuparambil.prakashan@intel.com>
Cc: K N Karthik <karthik.k.n@intel.com>
Signed-off-by: Guo Gua <gua.guo@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: K N Karthik <karthik.k.n@intel.com>
Reviewed-by: Chan Laura <laura.chan@intel.com>
Acked-by: Liming Gao <gaoliming@byosoft.com.cn>
Windows command prompt have 8191 characters limitation,
enhance it to make command too long can be resloved.
Provide an example, if have too many cov files, it causes to run single
command over the 8191 characters limitation.
> OpenCppCoverage
> --export_type binary:coverage.cov
> --working_dir={workspace}Build
> --input_coverage=AAA.cov
> ...
> --input_coverage=NNN.cov
The solution is passing many coverage files in single command line to
breaking it up into many command lines with one coverage file per
command line in order to prevent single line is over to 8191 characters.
- Command Line 1
> OpenCppCoverage
> --export_type binary:coverage.cov
> --working_dir={workspace}Build
> --input_coverage=AAA.cov
> --input_coverage=coverage.cov
...
- Command Line N
> OpenCppCoverage
> --export_type. binary:coverage.cov
> --working_dir={workspace}Build
> --input_coverage=NNN.cov
> --input_coverage=coverage.cov
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Michael Kubacki <mikuback@linux.microsoft.com>
Cc: Rebecca Cran <rebecca@bsdio.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: Gua Guo <gua.guo@intel.com>
Reviewed-by: Michael Kubacki <mikuback@linux.microsoft.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
On Windows, executables have a '.exe' suffix which needs to be added for
them to be found in a path.
Also, files need to be explicitly opened as binary.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
The BASETOOLS_PYTHON_SOURCE environment variable is only used temporarily to
set PYTHONPATH. Since it doesn't help improve clarity, remove it.
While here, make sure we set PYTHONPATH when we're using Pip BaseTools
so that build etc. can be found.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
This reverts commit 11f62f4cc09f16d265da1a737dabfd8ed65f8c00.
While GCC uses objcopy for the OBJCOPY command, it's not needed for the
CLANGDWARF toolchain and can be left as echo.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Ard BIesheuvel <ardb@kernel.org>
Not used any more, remove.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Use PlatformBootManagerLib with PcdBootRestrictToFirmware
set to TRUE instead.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
In case PcdBootRestrictToFirmware is set, disable loading EFI variables
from NvVars file.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Add new PCD PcdBootRestrictToFirmware. When set to TRUE restrict
boot options to EFI applications embedded into the firmware image.
Behavior should be identical to the PlatformBootManagerLibGrub
library variant.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Remove bashisms from edksetup.sh and BaseTools/BuildEnv. This allows any
POSIX shell to use those scripts, removing the dependency on bash.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
The build rule for Hii-Binary-Package.UEFI_HII should be the same as for
GCC, using $(RC) to embed the HII resource into the binary. Since the
build rule defaults to GCC, just remove CLANGGCC from the section.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Tested-by: Michael D Kinney <michael.d.kinney@intel.com>
The llvm-rc tool is for Windows PE resources. Since the CLANGDWARF
toolchain creates ELF binaries, update the RC path to be llvm-objcopy.
This follows the GCC toolchain which uses objcopy for the RC path.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Tested-by: Michael D Kinney <michael.d.kinney@intel.com>
Set the OBJCOPY path for the CLANGDWARF toolchain to 'llvm-objcopy' to
override the default of 'echo'.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Tested-by: Michael D Kinney <michael.d.kinney@intel.com>
There's only a single rule in build_rule.template for CLANGGCC, and it's
incorrect. We should instead just use the rules for GCC, so remove the
BUILDRULEFAMILY line for the CLANGDWARF toolchain definition.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Tested-by: Michael D Kinney <michael.d.kinney@intel.com>
Since CLANG35 and CLANG38 toolchains have been deleted from
tools_def.template, delete the build flags for them from CryptoPkg.
Since CLANGDWARF has replaced CLANG38, add build flags for it to the
CryptoPkg .inf files.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4443
Add Google Mock Library for HobLib
Add Google Mock Library for PeiServicesLib
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Chris Johnson <chris.n.johnson@intel.com>
Signed-off-by: Gua Guo <gua.guo@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4443
Add Google Mock Library for PciHostBridgeLib
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Chris Johnson <chris.n.johnson@intel.com>
Signed-off-by: Gua Guo <gua.guo@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
At TPL_HIGH_LEVEL, CPU interrupts are disabled (as per the UEFI
specification) and so we should never encounter a situation in which
an interrupt occurs at TPL_HIGH_LEVEL. The specification also
restricts usage of TPL_HIGH_LEVEL to the firmware itself.
However, nothing actually prevents a UEFI application from calling
gBS->RaiseTPL(TPL_HIGH_LEVEL) and then violating the invariant by
enabling interrupts via the STI or equivalent instruction. Some
versions of the Microsoft Windows bootloader are known to do this.
NestedInterruptTplLib maintains the invariant that interrupts are
disabled at TPL_HIGH_LEVEL (even when performing the dark art of
deliberately manipulating the stack so that IRET will return with
interrupts still disabled), but does not itself rely on external code
maintaining this invariant.
Relax the assertion that the interrupted TPL is below TPL_HIGH_LEVEL
to an error message, to allow UEFI applications such as these versions
of the Microsoft Windows bootloader to continue to function.
Debugged-by: Gerd Hoffmann <kraxel@redhat.com>
Debugged-by: Laszlo Ersek <lersek@redhat.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=2189136
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
NestedInterruptTplLib relies on CPU interrupts being disabled to
guarantee exclusive (and hence atomic) access to the shared state in
IsrState. Nothing in the calling interrupt handler should have
re-enabled interrupts before calling NestedInterruptRestoreTPL(), and
the loop in NestedInterruptRestoreTPL() itself maintains the invariant
that interrupts are disabled at the start of each iteration.
Add assertions to clarify this invariant, and expand the comments
around the calls to RestoreTPL() and DisableInterrupts() to clarify
the expectations around enabling and disabling interrupts.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Update toolsetup.bat and Tests/PythonTest.py to check if we're running a
version of Python that's compatible with BaseTools and the Pip
BaseTools.
BaseTools uses syntax from Python 3.6 or newer, so set that as the minimum
version EDK2 requires.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
If toolsetup.bat fails (i.e. exits with a non-zero %ERRORLEVEL%), don't
try and carry on but just quit.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
threading.currentThread is a deprecated alias for
threading.current_thread, and causes a warning to be displayed when it's
called. Update NmakeSubdirs.py to use the latter method instead.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Since Python3 is now required, we can remove the checks for PYTHON3_ENABLE
and PYTHON3 and simplify the code in toolsetup.bat. Also, remove the
leftover from when we supported freezing Python code.
While here, fix a couple of typos and improve error messages.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
It requires a fixed size array to store the content of device path PCD.
Add the array size to solve this issue.
Signed-off-by: Minh Nguyen <minhnguyen1@os.amperecomputing.com>
Cc: Abner Chang <abner.chang@amd.com>
Cc: Igor Kulchytskyy <igork@ami.com>
Cc: Nick Ramirez <nramirez@nvidia.com>
Reviewed-by: Abner Chang <Abner.Chang@amd.com>
This adds a missing newline character to make the error log
readable in case the module is failed.
Signed-off-by: Minh Nguyen <minhnguyen1@os.amperecomputing.com>
Cc: Abner Chang <abner.chang@amd.com>
Cc: Igor Kulchytskyy <igork@ami.com>
Cc: Nick Ramirez <nramirez@nvidia.com>
Reviewed-by: Nickle Wang <nicklew@nvidia.com>
