This fix is to pass VS2010/VS2012 build.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
We need to disable system timer interrup to avoid generating the pending
interrupt on the old BSP.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Kinney Michael D <michael.d.kinney@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
During switching BSP phase, we need to disable CPU interruput to prevent stack
crashed by Timer interrupt handle. But when we enabled source debugging feature,
debug timer interrupt handler (existing on both PEI and DXE) also could crash
the stack used during switching BSP. So,we need to move save/restore interrupt
to SwitchBSPWorker().
Cc: Feng Tian <feng.tian@intel.com>
Cc: Kinney Michael D <michael.d.kinney@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
The current DxeDebugAgentLib supports source debugging on AP function. This
update is to update DxeMpInitLib to consume Debug Agent Library by
DEBUG_AGENT_INIT_DXE_AP flag. Thus, we could source debugging AP function
invoked by CPU MP Protocol.
However, current SecPeiDebugAgentLib does not support source debugging on AP
function invoked by CPU MP PPI. I have submitted one bugzilla to add this
support at https://bugzilla.tianocore.org/show_bug.cgi?id=308.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Kinney Michael D <michael.d.kinney@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Add one semaphore to make sure BSP to wait till all APs run in AP safe loop
code.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
For long mode DXE, we will disable paging on AP to protected mode to execute AP
safe loop code in reserved memory range under 4GB. But we forget to allocate
stack for AP under 4GB and AP still are using original AP stack. If original AP
stack is larger than 4GB, it cannot be used after AP is transferred to protected
mode. Besides MwaitSupport == TRUE, AP stack is still required during phase of
disabling paging in long mode DXE.
Moreover, even though AP stack is always under 4GB (a) in Ia32 DXE and (b) with
this patch, after transferring to protected mode from X64 DXE, AP stack
(in BootServiceData) maybe crashed by OS after Exit Boot Service event.
This fix is to allocate reserved memory range under 4GB together with AP safe
loop code. APs will switch to new stack in safe loop code.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
AP loop function is already saved into global variable, needn't to get it from
AP function parameter.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Currently, DxeMpLib only places APs into specified c-state in Exit Boot Service
callback function for UEFI OS boot. We need to put APs into specified c-state
for legacy OS boot also.
https://bugzilla.tianocore.org/show_bug.cgi?id=210
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Rename MpInitExitBootServicesCallback() to MpInitChangeApLoopCallback() because
it will not only be invoked on Exit Boot Service Event, but also will be invoked
on Legacy Ready To Boot Event.
https://bugzilla.tianocore.org/show_bug.cgi?id=210
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Current implementation just allocates reserve memory for AsmRelocateApLoopFunc.
It not be safe because APs will be placed into 32bit protected mode on long mode
DXE. This reserve memory must be located below 4GB memory.
This fix is to allocate < 4GB memory for AsmRelocateApLoopFunc.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
[lersek@redhat.com: strip whitespace at EOL]
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
If MaxLogicalProcessorNumber is only 1, we needn't to wake up APs at all
and needn't to register callback functions.
It could improve boot performance on single supported system.
https://bugzilla.tianocore.org/show_bug.cgi?id=204
Cc: Feng Tian <feng.tian@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
In Exit Boot Services callback function, we cannot use allocate memory services
because it may change the memory map that has been gotten by OS.
This fix is not to allocate reset vector buffer after SaveRestoreFlag is set to
TRUE in MpInitExitBootServicesCallback(). Instead AllocateResetVector() will use
the previous allocated buffer address and save the contents before copying reset
vector code. At the same time, FreeResetVector() will restore original contents
after if SaveRestoreFlag is TRUE.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
In Exit Boot Services callback function, we cannot use allocate memory services
because it may change the memory map that has been gotten by OS.
This fix is to move allocating reserved memory for AP loop code to
InitMpGlobalData() and save the memory address in one global variable.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Register Exit Boot Service callback function MpInitExitBootServicesCallback() to
place AP one safe loop before hand-off to OS.
Allocated one reserved memory and copy the AsmRellocateApLoop() code into it. It
could avoid the CPU Dxe driver (located in Boot Service data range) crashed
after Exit Boot Service event.
Place AP into the target Cx-State (specified by PcdCpuApTargetCstate) could save
power if Monitor-mwait feature supported.
In long mode, switch AP into protected mode could let AP not require page table
when executing this safe loop. Page Table (located in Boot Service data range)
may crashed after Exit Boot Service event.
v3:
1. Rename *RellocateAp* to *RelocateAp*
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
v4:
1. Simply the internal function StartupAllAPsWorker()'s function
header due to it is duplicated with MpInitLibStartupAllAPs().
v3:
1. Use CamelCase for mStopCheckAllApsStatus and
CheckAndUpdateApsStatus()
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
v4:
1. Simply the internal function StartupThisAPWorker()'s comment
header due to it is duplicated with MpInitLibStartupThisAP().
v3:
1. Use CamelCase for mStopCheckAllApsStatus and
CheckAndUpdateApsStatus().
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
v4:
1. Simply the internal function MpInitLibEnableDisableAP()'s function
header due to it is duplicated with MpInitLibEnableDisableAP().
v3:
1. Use CamelCase for mCheckAllAPsEvent, mStopCheckAllApsStatus.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
v4:
1. Simply the internal function SwitchBSPWorker()'s comment header
due to it is duplicated with MpInitLibSwitchBSP().
v3:
1. Rename MpInitLibSwitchBsp to MpInitLibSwitchBSP.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
In PeiMpInitLib, searching unallocated memory under in
EFI_HOB_TYPE_RESOURCE_DESCRIPTOR hobs to find the memory under 1MB for AP reset
vector. After End of PEI event triggered, we need to restore original the buffer
contents to avoid crash the OS on S3 boot.
In DxeMpInitLib, allocate the memory under 1MB for AP reset vector.
Add helper functions AllocateResetVector()/FreeResetVector() used by WakeupAp().
v3:
1. Move SetTimer() from Patch #17 to Patch 16.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
In DxeMpInitLib, register one period event callback function CheckAPsStatus()
used to check AP Status.
v5:
1. Introduce AP_CHECK_INTERVAL for adjust AP check timer interval potential.
v3:
1. Use CamelCase for mCheckAllAPsEvent, mStopCheckAllApsStatus and
CheckAndUpdateApsStatus().
2. Move SetTimer() from Patch #17 to Patch 16.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
In PeiMpInitLib, save CPU MP Data pointer into one local Guided HOB.
In DxeMpInitLib, save CPU MP Data pointer into one global variable.
Add helper functions GetCpuMpData()/SaveCpuMpData().
v5:
1. Move CPU_INIT_MP_LIB_HOB_GUID from MpLib.c to MpLib.h to make
all C files visible.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
Add two MP Initialize Library instances PeiMpInitLib.inf and DxeMpInitLib.inf
with NULL implementation.
One PeiMpInitLib.inf is consumed by PEI MP driver. Another DxeMpInitLib.inf is
consumed by DXE MP driver.
Place MpInitLibStartupAllAPs()/MpInitLibStartupThisAp()/MpInitLibSwitchBSP()/
MpInitLibEnableDisableAP() into PeiMpLib.c and DxeMpLib.c, because they have
the different implementations and will be updated in latter patches.
v5:
1. Add back PeiExceptionHandlerLib.inf in UefiCpuPkg.dsc. It is removed
incorrectly.
v4:
1. Return EFI_UNSUPPORTED instead of EFI_SUCCESS for NULL implementation of
all Functions.
2. Sync MpInitLibxxx functions header updating described in v4 part of Patch
#4.
v3:
1. Rename MpInitLibSwitchBsp to MpInitLibSwitchBSP to match PI spec
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
Jeff Fan
Dandan Bi
Gary Lin