This patch fixes the following Ecc reported error:
Non-Boolean comparisons should use a compare operator
(==, !=, >, < >=, <=)
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
This patch fixes the following Ecc reported error:
Non-Boolean comparisons should use a compare operator
(==, !=, >, < >=, <=)
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
This patch fixes the following Ecc reported error:
Non-Boolean comparisons should use a compare operator
(==, !=, >, < >=, <=)
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
This patch fixes the following Ecc reported error:
Non-Boolean comparisons should use a compare operator
(==, !=, >, < >=, <=)
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
This patch fixes the following Ecc reported error:
Non-Boolean comparisons should use a compare operator
(==, !=, >, < >=, <=)
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
This patch fixes the following Ecc reported error:
Non-Boolean comparisons should use a compare operator
(==, !=, >, < >=, <=)
Brackets are also added to comply to with the coding
standard.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
The header of the file is not formatted properly, making
the Ecc tool crash when running on the ArmPkg.
The following command was run:
./BaseTools/BinWrappers/PosixLike/Ecc
-c BaseTools/Source/Python/Ecc/config.ini
-e BaseTools/Source/Python/Ecc/exception.xml
-t ArmPkg -r ArmPkgEcc.xls
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
The same functions have been defined in BrotliDecUefiSupport.c.
Signed-off-by: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
ConSplitter is using EFI_LIGHTGRAY foreground color for ConOut
and EFI_MAGENTA for StdErr consoles. This is impacting the DebugLib
output on that same serial console (e.g. DebugLibSerialPort) after
gEfiStandardErrorDeviceGuid is installed on that port. The impact
also extends to Linux serial console output in OVMF because it inherits
the color setting from the firmware.
This is inconsistent and annoying, with MAGENTA being barely legible on
a black background.
Let's change StdErr default color to LIGHTGRAY for consistency and
readability. This results in the same color being used for all consoles
sharing the same serial port (ConOut, StdErr, DebugLib, OS console).
Platforms wishing to distinguish the colors of consoles can do so in
their own Platform BDS initialization.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Ard Biesheuvel <Ard.Biesheuvel@arm.com>
Signed-off-by: Samer El-Haj-Mahmoud <Samer.El-Haj-Mahmoud@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Pete Batard <pete@akeo.ie>
Tested-by: Pete Batard <pete@akeo.ie>
(On an RPi 4 platform where this was another annoyance)
REF: https://github.com/pftf/RPi4/issues/115
GraphicsConsoleDxe defaults the ConOut Mode.CursorVisible to TRUE.
However, the driver never draws the cursor during init. This results
in the first call to disable the cursor (using ConOut->EnableCursor(FALSE))
to actually draw the cursor on the screen, as the logic in FlushCursor
depends on the Mode.CursorVisible state to determine if it should draw or
erase the cursor.
Fix by changing the default CursorVisible in this driver to FALSE.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Ard Biesheuvel <Ard.Biesheuvel@arm.com>
Cc: Pete Batard <pete@akeo.ie>
Signed-off-by: Samer El-Haj-Mahmoud <Samer.El-Haj-Mahmoud@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Pete Batard <pete@akeo.ie>
Tested-by: Pete Batard <pete@akeo.ie>
(On an RPi4 platform where we had this annoyance of an unwanted cursor
displaying on top of the platform logo)
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3032
We had a build fail due to the hard coded MAX_LONG_FILE_PATH value.
We should use PATH_MAX if it is available.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: Enze Zhu <zhuenze@byosoft.com.cn>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
EdkLogger.ERROR() was replaced with EdkLogger.error() to deliver the
expected error message when an error occurs.
Signed-off-by: Irene Park <ipark@nvidia.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3136
Python 3.9 remove the array.array.tostring and
array.array.fromstring() function. This patch
is to use other method to replace tostring() and
fromstring()
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Cc: Mingyue Liang <mingyuex.liang@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Implement a version of the NOR Flash driver that can execute
in standalone MM context.
This is used to access the secure variable storage, it only
supports EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL.
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
In preparation of creating a standalone MM version of the
NOR Flash driver, refactor the existing pieces into a core
driver. NorFlashDxe.c has the DXE instantiation code,
FVB initialization code and some common functions.
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
This patch fixes the following Ecc reported error:
Variable name does not follow the rules:
1. First character should be upper case
2. Must contain lower case characters
3. No white space characters
4. Global variable name must start with a 'g'
Indeed, according to the EDK II C Coding Standards
Specification, s5.6.2.2 "Enumerated Types" and
s4.3.4 Function and Data Names, elements of an
enumerated type shoud be a mixed upper- and
lower-case text.
A max element is also added, as advised by
s5.6.2.2.3 of the same document.
Reference:
https://edk2-docs.gitbook.io/edk-ii-c-coding-standards-specification/
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=313
Add PcdPcieResizableBarSupport to enable/disable PCIe Resizable
BAR Capability fearture.
Program the Resizable BAR Register if the device suports PCIe Resizable
BAR Capability and PcdPcieResizableBarSupport is TRUE.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Signed-off-by: Heng Luo <heng.luo@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3138
Define structures for Resizable BAR Capability in
MdePkg/Include/IndustryStandard/PciExpress21.h,
Change ShellPkg/Library/UefiShellDebug1CommandsLib/Pci.c
to use new structures.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Signed-off-by: Heng Luo <heng.luo@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add EFI REST EX helper library to create child instance of
REST EX service.
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Fan Wang <fan.wang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Nickle Wang <nickle.wang@hpe.com>
Cc: Peter O'Hanley <peter.ohanley@hpe.com>
Reviewed-by: Nickle Wang <nickle.wang@hpe.com>
This commit adds the VarCheckPolicyLib that will be able to
execute in the context of standalone MM.
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Co-authored-by: Kun Qin <kun.q@outlook.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3120
FixedAtBuild, PatchableInModule and FeatureFlag PCD don't use PCD TOKEN.
Their PCD TOKEN value can always be zero.
AutoGen.h will not be changed when static PCD is added or removed.
Dynamic PCD add or remove will still cause dynamic PCD token value be
changed.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: Yunhua Feng <fengyunhua@byosoft.com.cn>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=3130
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Acked-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
As the condition of while statement is argc > 0, so argc < 1 will always
be false, it's redundant.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: Wenyi Xie <xiewenyi2@huawei.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3126
1. If use PeiDxeDebugLibReportStatusCode as DebugLib, then some logs
after ExitBootService() will be lost.
2. The root cause:
2.1 The original code will register an unregister function
of gEfiEventExitBootServicesGuid, this unregister function will call
EFI_RSC_HANDLER_PROTOCOL->Unregister and does not support log through
serial port.
2.2 And some other drivers also register call back funtions of
gEfiEventExitBootServicesGuid.
2.3 Then after the unregister function is called, other call back
functions can't out log if them use RSC as DebugLib.
3. The DxeMain will report status code EFI_SW_BS_PC_EXIT_BOOT_SERVICES
after notify all the call back functions of
gEfiEventExitBootServicesGuid.
4. Solution: the StatusCodeHandlerRuntimeDxe.c will not register an
unregister function of gEfiEventExitBootServicesGuid, but unregister it
after receive the status code of EFI_SW_BS_PC_EXIT_BOOT_SERVICES.
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Ming Tan <ming.tan@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
When Alignment < 0x400 is false, the expression of Alignment >= 0x400 is
always true. So extract the expression from the else if statement.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: Wenyi Xie <xiewenyi2@huawei.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3127
If one protocol is not found in package dec file, Build will report the
error message that module.inf(-1): error 4000: Value of Protocol
[gXxxProtocolGuid] is not found under [Protocols] section in MdePkg.dec.
Here, -1 should be the line number of this protocol in module INF file.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: Yunhua Feng <fengyunhua@byosoft.com.cn>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
The Ecc tool currently reports the initialization of variables
at declaraton if the variable is non-constant and declared
in a function. Static variables locally defined in functions
should also be allowed to be initialized at declaration.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
The ECC tool crashes if a C file has an incorrect file header
format.
The file ArmPkg\Library\ArmMmuLib\AArch64\ArmMmuPeiLibConstructor.c
has a file header in the incorrect format. It uses # to mark the
header comments instead of enclosing the file header in /* */. This
may have been a result of an INF file header being copied to a C
file.
A separate patch fixes the C file but ECC tool should
not crash if a file with an incorrect header is found.
Therefore, update the ECC tool to prevent it from crashing if an
incorrect file header is found. With this change the ECC tool will
report the incorrect header issue without crashing.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Using the functions introduced previously, we can now update file
attributes in VirtioFsSimpleFileSetInfo().
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3097
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20201216211125.19496-49-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Using the functions introduced previously, we can now implement the rename
operation in VirtioFsSimpleFileSetInfo().
Attribute updates come later.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3097
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20201216211125.19496-44-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
The EFI_FILE_PROTOCOL.SetInfo() member is somewhat under-specified; one of
its modes of operation is renaming/moving the file.
In order to create the destination pathname in canonical format, 2*2=4
cases have to be considered. For the sake of discussion, assume the
current canonical pathname of a VIRTIO_FS_FILE is "/home/user/f1.txt".
Then, consider the following rename/move requests from
EFI_FILE_PROTOCOL.SetInfo():
Destination requested Destination Move into Destination in
by SetInfo() relative? directory? canonical format
--------------------- ----------- ---------- -----------------------
L"\\dir\\f2.txt" no no "/dir/f2.txt"
L"\\dir\\" no yes "/dir/f1.txt"
L"dir\\f2.txt" yes no "/home/user/dir/f2.txt"
L"dir\\" yes yes "/home/user/dir/f1.txt"
Add the VirtioFsComposeRenameDestination() function, for composing the
last column from the current canonical pathname and the SetInfo() input.
The function works on the following principles:
- The prefix of the destination path is "/", if the SetInfo() rename
request is absolute.
Otherwise, the dest prefix is the "current directory" (the most specific
parent directory) of the original pathname (in the above example,
"/home/user").
- The suffix of the destination path is precisely the SetInfo() request
string, if the "move into directory" convenience format -- the trailing
backslash -- is not used. (In the above example, L"\\dir\\f2.txt" and
L"dir\\f2.txt".)
Otherwise, the suffix is the SetInfo() request, plus the original
basename (in the above example, L"\\dir\\f1.txt" and L"dir\\f1.txt").
- The complete destination is created by fusing the dest prefix and the
dest suffix, using the VirtioFsAppendPath() function.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3097
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20201216211125.19496-43-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
The least complicated third of EFI_FILE_PROTOCOL.SetInfo() is to handle
the EFI_FILE_SYSTEM_INFO and EFI_FILE_SYSTEM_VOLUME_LABEL setting
requests. Both of those can only change the volume label -- which the
Virtio Filesystem device does not support.
Verify the input for well-formedness, and report success only if the
volume label is being set to its current value.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3097
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20201216211125.19496-41-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Using the functions introduced previously, we can now implement
VirtioFsSimpleFileWrite().
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3097
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20201216211125.19496-40-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Add the VirtioFsFuseWrite() function, for sending the FUSE_WRITE command
to the Virtio Filesystem device.
(For avoiding oversized FUSE_WRITE commands, save the maximum write buffer
size that is advertized by the FUSE server, in the session init code.)
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3097
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20201216211125.19496-39-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
For directories, implement EFI_FILE_PROTOCOL.Flush() by sending the
FUSE_FSYNCDIR command to the Virtio Filesystem device.
For regular files, send FUSE_FLUSH, followed by FUSE_FSYNC.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3097
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20201216211125.19496-38-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Using the functions introduced previously, we can now implement
VirtioFsSimpleFileRead() for directories as well.
This patch completes the read-only support for virtio-fs. Commands like
"TYPE" and "DIR" work in the UEFI shell.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3097
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20201216211125.19496-37-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
For reading through a directory stream with tolerable performance, we'll
have to call FUSE_READDIRPLUS each time with such a buffer that can
deliver a good number of variable size records
(VIRTIO_FS_FUSE_DIRENTPLUS_RESPONSE elements). Every time we'll do that,
we'll turn the whole bunch into an array of EFI_FILE_INFOs immediately.
EFI_FILE_PROTOCOL.Read() invocations (on directories) will be served from
this EFI_FILE_INFO cache.
Add the fields for the EFI_FILE_INFO cache to VIRTIO_FS_FILE:
- initialize them in Open() and OpenVolume(),
- release the cache in Close() and Delete(),
- also release the cache when the directory is rewound, in SetPosition().
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3097
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20201216211125.19496-36-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Introduce the VirtioFsFuseDirentPlusToEfiFileInfo() function, for
converting the VIRTIO_FS_FUSE_DIRENTPLUS_RESPONSE filename byte array to
EFI_FILE_INFO.
This new function updates those EFI_FILE_INFO fields (Size, FileName) that
the earlier helper function VirtioFsFuseAttrToEfiFileInfo() does not set.
Both functions together will be able to fill in EFI_FILE_INFO completely,
from FUSE_READDIRPLUS.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3097
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20201216211125.19496-35-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Using the functions introduced previously, we can now implement
VirtioFsSimpleFileRead(); for regular files at first.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3097
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20201216211125.19496-34-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Pierre Gondois
gaoliming
Samer El-Haj-Mahmoud
Enze Zhu
Irene Park
Bob Feng
wenyi,xie via groups.io
Masahisa Kojima
Luo, Heng
Abner Chang
Yunhua Feng
Michael D Kinney
Tan, Ming
Sami Mujawar
Laszlo Ersek