This is a port of the AARCH64 low level init routines to ARM. This
mainly covers the platform boot code that extracts the system base
and size from the DTB, copies it and updates the FD and FV base
addresses according to the load time offset.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19332 6f19259b-4bc3-4df7-8a09-765794883524
Parsing the DTB early on using a handcoded assembly routine is a pointless
waste of brain cycles, since the UEFI firmware always executes from RAM
under Xen. So instead, set up a temporary stack in the memory region at the
beginning of the image, and use the libfdt C library.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19330 6f19259b-4bc3-4df7-8a09-765794883524
While QEMU NUMA support on ARM will introduce more than one /memory node
in the device tree, it needs to find the lowest one and set
PcdSystemMemorySize with the actual size of this memory node.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19123 6f19259b-4bc3-4df7-8a09-765794883524
The ARM RVCT compiler does not allow implicit casts between enumerated
types and integer types. In this particular case, the STUB_FILE::Position
member is overloaded as a KERNEL_BLOB_TYPE identifier, so it does not
hurt to make that cast explicit.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19108 6f19259b-4bc3-4df7-8a09-765794883524
Now that all PeiServicesTablePointerLib and PrePiHobListPointerLib
library dependencies in both ArmVirtQemu and ArmVirtXen are satisfied
by implementations that do not depend on ArmPlatformGlobalVariableLib,
we can remove all mention of it from the various .dsc files.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18986 6f19259b-4bc3-4df7-8a09-765794883524
Beyond just changing the directly related lines in the FDF and DSC files,
we have to adapt the EarlyFdtPL011SerialPortLib and FdtPL011SerialPortLib
instances as well, in the same patch. This is because the EmbeddedPkg
driver expects the SerialPortSetAttributes(),
SerialPortSetControl() and SerialPortGetControl() functions from
SerialPortExtLib, while the MdeModulePkg driver expects them from
SerialPortLib itself.
We cannot implement these functions in ArmVirtPkg's SerialPortLib
instances *before* flipping the driver, because it would cause double
function definitions in the EmbeddedPkg driver. We also can't implement
the functions *after* flipping the driver, because it would cause
unresolved function references in the MdeModulePkg driver. Therefore
we have to implement the functions simultaneously with the driver
replacement.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18973 6f19259b-4bc3-4df7-8a09-765794883524
The ID mapping routines on virtual platforms simply map the entire
hardware supported physical address space as device memory, and then
punch some holes for regions that need to be mapped cacheable.
On virtual platforms hosted on CPUs that support a large physical
address range, this may result in a lot of overhead, i.e., 4 KB of page
tables for each 512 GB of address space, which quickly adds up (i.e.,
2 MB for the architectural maximum of 48 bits).
Since there may be a platform specific limit to the size of the (I)PA
space that is not reflected by CPU id registers, restrict the range of
the ID mapping to gEmbeddedTokenSpaceGuid.PcdPrePiCpuMemorySize bits.
This makes sense by itself, since we cannot manipulate mappings above
that limit anwyay (because they are not covered by GCD), and it allows
the PCD be set to a lower value by platforms whose (I)PA space is
smaller than the hardware supported maximum.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Wei Huang <wei@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18929 6f19259b-4bc3-4df7-8a09-765794883524
The ARM architecture version 7 and later mandates that device mappings
have the XN (non-executable) bit set, to prevent speculative instruction
fetches from read-sensitive regions. This implies that we should not map
regions as device if we want to execute from them, so the NOR region that
contains our FD image should be mapped as normal memory instead.
The MMU code deals correctly with overlapping ARM_MEMORY_REGION_DESCRIPTOR
entries, and later entries in the array take precedence over earlier ones.
So simply add an entry to the end of the array that overrides the mapping
attributes of the FD image, wherever it resides.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18889 6f19259b-4bc3-4df7-8a09-765794883524
According to the UEFI spec, EFI_EVENT_GROUP_READY_TO_BOOT "is notified by
the system when the Boot Manager is about to load and execute a boot
option". ArmVirtPkg doesn't do this currently when launching a kernel from
the QEMU command line. OvmfPkg does (see git commit 28a34033ee).
At least two edk2-wide callbacks are worth mentioning:
- OnReadyToBoot() in
"MdeModulePkg/Universal/Variable/RuntimeDxe/VariableDxe.c" performs
variable reclaim and (optionally) installs variable usage statistics as
a vendor config table;
- OnReadyToBoot() in
"SecurityPkg/Library/DxeImageVerificationLib/DxeImageVerificationLib.c"
installs the image execution info table if it doesn't exist yet, in
SecureBoot-enabled builds.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18513 6f19259b-4bc3-4df7-8a09-765794883524
On 32-bit ARM, split system memory into a region below (and up to) 4 GB
and a region above 4 GB. This is necessary to get the DXE core to consider
the former as the resource descriptor that describes the primary memory
region that also covers the PHIT region.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18427 6f19259b-4bc3-4df7-8a09-765794883524
The relocated immediate notation supported by GNU as (e.g., #:lo12:foo)
is not supported by clang. Since we are loading a constant value, they
were not entirely appropriate here anyway, so simply replace them with
assembler arithmetic expressions.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18202 6f19259b-4bc3-4df7-8a09-765794883524
Since it is arguably incorrect to infer the GIC revision from CPU
ID and GIC feature registers on platforms that describe the GIC in
the device tree, this implements the library class ArmGicArchLib
tailored for such platforms.
The supported GIC revision is retrieved from the dynamic PCD that
is set based on the GIC DT node.
This means this library can only execute post DXE core, but this is
not a problem for any of the virt platforms.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18102 6f19259b-4bc3-4df7-8a09-765794883524
Add a fixed pointer PCD to allow build-time selection of VT100 or TTY terminal
type. The default remains VT100 emulation.
Add support for building the ARM QEMU platforms with the TTY terminal
with the "-D TTY_TERMINAL" build option.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
[Roy Franz: minor edits: add TtyTerminal GUID, rename LINUX_TERMINAL to TTY_TERMINAL]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Roy Franz <roy.franz@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17898 6f19259b-4bc3-4df7-8a09-765794883524
Currently, the ArmVirtPkg platforms built with the Intel BDS fail
to signal the end-of-DXE event 'gEfiEndOfDxeEventGroupGuid' when
entering the BDS phase, which results in some loss of functionality,
i.e., variable reclaim in the VariableDxe drivers, and the splitting
of the memory regions that is part of the recently added UEFI 2.5
properties table feature.
As discussed on the edk2-devel mailing list here:
http://thread.gmane.org/gmane.comp.bios.tianocore.devel/16088/focus=16109
it is up to the platform BDS to signal that event, since there may be
platform specific ordering constraints with respect to the signalling
of the event that are difficult to honor at the generic level.
So add the SignalEvent () call to PlatformBdsInit () of ArmVirtPkg's
PlatformBdsLib implementation for the Intel BDS.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17713 6f19259b-4bc3-4df7-8a09-765794883524
Ard Biesheuvel
Shannon Zhao
Star Zeng
Laszlo Ersek
Olivier Martin