Commit Graph

67 Commits

Author SHA1 Message Date
Fu Siyuan b80a409739 NetworkPkg: Fix GCC build error.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2017-09-06 18:08:07 +08:00
Fu Siyuan 9a04dcffbb NetworkPkg/Ip6Dxe: fix a bug in IP6 driver for IpSec protocol notify.
The IP driver uses EfiCreateProtocolNotifyEvent() to register notify callback
function for IpSec protocol, but it didn't notice that the callback will always
be executed at least once, even the protocol wasn't in handle database.
As a result, the Ip6IpSecProcessPacket() will still always call LocateProtocol()
even the IpSec protocol is not installed, which will impact the network
performance.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
2017-09-06 14:57:45 +08:00
Jiaxin Wu aa0f2bf7cc NetworkPkg/Ip6Dxe: Fix the bug when checking the DataSize
During setting the DnsServer, the DataSize check is incorrect.
This patch is to fix the issue.

Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
2017-08-17 08:18:27 +08:00
Jiaxin Wu bee7fe0ef9 NetworkPkg/Ip6Dxe: Support SetData interface to clear specific configuration
UEFI Spec 2.7 adds the clarification on SetData interface usage to clear specific
individual data types. This patch is to support this feature.

Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
2017-08-11 12:58:12 +08:00
Jiaxin Wu 9ef28ed312 NetworkPkg/Ip6Dxe: Fix the IPv6 PXE boot option goes missing issue
This patch is to fix the potential issue recorded at Bugzilla 636:
https://bugzilla.tianocore.org/show_bug.cgi?id=636

The issue is caused by the IPv6 policy switching after PXEv6 boot. When IP
policy is changing, the IPv6 children used by PXE.UdpRead() will be destroyed.
Then, PXE Stop() function is called to uninstall the devicePath protocol,
which leads to the IPv6 PXE boot option goes missing.

Through the above analysis, the IP driver should take the responsibility for
the upper layer network stacks recovery by using ConnectController().

Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Cc: Subramanian Sriram <sriram-s@hpe.com>
Cc: Ni Ruiyu <ruiyu.ni@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-by: Subramanian Sriram <sriram-s@hpe.com>
Tested-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
2017-08-02 15:31:37 +08:00
Jiaxin Wu c314970984 NetworkPkg: Typo fix and comments correction
warter -> water
Maunual -> Manual
TCP and UDP --> TCP4 and TCP6
TCP or UDP --> TCP4 or TCP6

Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
2017-06-14 10:51:50 +08:00
Zhang, Lubo 52cad7d0d8 NetworkPkg: Fix bug related DAD issue in IP6 driver.
If we set PXEv6 as the first boot option and reboot immediately
after the first successful boot, it will assert. the root cause is
when we set the policy from manual to automatic in PXE driver,
the ip6 Configure item size is already set to zero and other
structures are also released, So it is not needed to perform DAD call
back function which is invoked by Ip6ConfigSetMaunualAddress.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
2017-04-20 15:52:53 +08:00
Jiaxin Wu 9508a4ac3d NetworkPkg/Ip6Dxe: Ignore duplicated DNS address check
Having duplicated DNS server IPs specified is not an ideal
configuration, but not an error condition. This patch is to
remove the duplicated DNS address check to allow the same DNS
address setting in SetData().

Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Cc: Subramanian Sriram <sriram-s@hpe.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Subramanian Sriram <sriram-s@hpe.com>
Reviewed-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Tested-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
2017-02-27 14:57:26 +08:00
Zhang Lubo 625b39ced2 NetworkPkg: Update the Ethernet interface name.
Update the interface name from ethA ethB to
eth10, eth11 etc if port number more than 9.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Sriram Subramanian <sriram-s@hpe.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
2017-02-23 16:51:34 +08:00
Zhang Lubo 80e63e846a NetworkPkg:Generate the correct operational state of the interface.
Currently, When there are more than 9 Ethernet ports available,
'ifconfig6 -l' is not listing all the ports, only show the ports 0 to 9.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Santhapur Naveen <naveens@amiindia.co.in>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
2017-02-20 10:09:30 +08:00
Jiaxin Wu ab50ab6ea1 NetworkPkg/Ip6Dxe: Fix the potential NULL pointer free
Ip6ConfigSetDnsServer may cause ASSERT if the invalid DNS
server address received. The issue is triggered by the NULL
pointer(Tmp) free.

Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
2017-01-04 08:40:27 +08:00
Gary Lin d1c85a17fa NetworkPkg: Fix typos in comments
- assocated -> associated
- malformated -> malformatted
- mal-formated -> mal-formatted
- formated -> formatted
- octects -> octets
- responsiblity -> responsibility
- enought -> enough
- immediatly -> immediately
- integar -> integer
- Alogrithem -> Algorithm
- Initializeion -> Initialization
- primelenght -> primelength
- Vlaue -> Value
- perfoms -> performs
- randome -> random
- verifed -> verified
- finallization -> finalization
- Intializes -> Initializes
- specifed -> specified
- if -> If
- Decrption -> Decryption
- Autahentication -> Authentication
- informatino -> information
- alogrithm -> algorithm
- Authenticaion -> Authentication
- Alogrithem -> Algorithm
- containning -> containing
- paramter -> parameter

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-By: Siyuan Fu <siyuan.fu@intel.com>
Reviewed-By: Jiaxin Wu <jiaxin.wu@intel.com>
2016-10-26 08:50:03 +08:00
Jiaxin Wu 00df35fe41 NetworkPkg: Clean the previous address since the policy changed
The previous DNS server data will be retained after the policy
changes from Auto to Manual. This patch is used to clean the
previous dhcp configuration data.

Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Cc: Subramanian Sriram <sriram-s@hpe.com>
Cc: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Tested-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
2016-09-26 21:25:23 +08:00
Giri P Mudusuru c2adf51f00 NetworkPkg: Fix typos in comments
- abstrated to abstracted
- apropriate to appropriate
- availabe to available
- ptototypes to prototypes
- prococol protocol

Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
2016-07-11 10:29:50 +08:00
Zhang Lubo 142c00c3d6 NetworkPkg: Refine codes related to Dhcpv4 and Dhcpv6 configuration.
v2:
*Since we have redefined the name of arch types in Dhcp.h for http boot,
it need to change corresponding codes.

Add a new head file Dhcp.h in Mde/Include/IndustryStandard, normalize the
universal option numbers and other network number tags.

Cc: Sriram Subramanian <sriram-s@hpe.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
2016-06-23 09:39:38 +08:00
Fu, Siyuan 5c944a654a NetworkPkg: Stop the timer before clean IP service.
In Ip6CleanService()it first cleaned some resources, then stop the timer .
While before the timer stopped it may try to access some already freed
data, which may generate an exception.
This patch updates the driver to stop the timer event before starting to
clean up the service data.

Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Subramanian Sriram <sriram-s@hpe.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
2016-05-31 10:56:21 +08:00
Jiaxin Wu 7959b06748 NetworkPkg: Fix issue in Ip6Dxe SetData
EFI_NOT_READY should not be treated as an error status
returned from SetData for Ip6ConfigDataTypeManualAddress
since there is an asynchronous operation for DAD process.

Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Tested-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
2016-04-14 14:55:09 +08:00
Zhang Lubo c720da2866 NetworkPkg: Add new macros and refine codes
v2:
*refine some codes

Add 2 macros in NetLib.h
#define  IP4_MASK_MAX          32
#define  IP6_PREFIX_MAX        128
we will use these two macros to check the max mask/prefix length,
instead of
#define  IP4_MASK_NUM          33
#define  IP6_PREFIX_NUM        129
which means a valid number
This will make the code readability and maintainability.

Cc: Subramanian Sriram <sriram-s@hpe.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@@hpe.com>
2016-04-11 08:24:47 +08:00
Jiaxin Wu 4720106b99 NetworkPkg: Change the default IPv6 config policy
The default policy for Ip6Config is Ip6ConfigPolicyAutomatic,
which results in all NIC ports starting SARR process when it
receives RA message with M flag from IPv6 router. So, this
patch is used to changes the the default IPv6 config policy to
Ip6ConfigPolicyManualand also defer the SetData operation after
Ip6ConfigProtocol installed. This update let the other platform
drivers have chance to change the default config data by consume
Ip6ConfigProtocol.

Cc: Subramanian Sriram <sriram-s@hpe.com>
Cc: El-Haj-Mahmoud Samer <samer.el-haj-mahmoud@hpe.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Subramanian Sriram <sriram-s@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
2016-03-02 15:43:52 +08:00
Samer El-Haj-Mahmoud 40696972bf NetworkPkg: better sanity check on Ipv6 prefix length
Fix a possible buffer overrun issue that could occur if PrefixLength >
128 . Changed == 128 to >= 128. Also remove check for Byte < 16, which
is no longer possible because of the first change.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
2016-02-14 10:31:20 +08:00
Zhang Lubo ce22514e48 NetworkPkg:Fix Network memory leak when calling GetModeData interface
Multiple network protocols have a GetModeData() interface, which may
allocate memory resource in the return mode data structure. It's
callers responsibility to free these buffers.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>

git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19758 6f19259b-4bc3-4df7-8a09-765794883524
2016-01-28 02:32:43 +00:00
Jordan Justen b55fecfee6 NetworkPkg: Convert all .uni files to utf-8
To convert these files I ran:

$ python3 BaseTools/Scripts/ConvertUni.py NetworkPkg

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>

git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19258 6f19259b-4bc3-4df7-8a09-765794883524
2015-12-15 04:56:57 +00:00
Fu Siyuan 01097ae1c2 NetworkPkg: remove redundant words in function comment.
A function with void return type doesn't need @retval line in its function
comment. This patch removes one redundant line from Ip6 driver in r18365.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>

git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18384 6f19259b-4bc3-4df7-8a09-765794883524
2015-09-02 07:40:21 +00:00
Samer El-Haj-Mahmoud c79de074b6 MdeModulePkg/NetworkPkg: Locate IpSec on IP packet processing only if it's installed.
Modified the logic in Ip4Dxe and Ip6Dxe to not locate EFI_IPSEC2_PROTOCOL on each
message transmit/receive. Instead, register a callback in the drivers entry points
on the IpSec protocol installation, and process only if the protocol is installed.
This speeds up the network stacks when IpSec is not installed since there is a
penalty associated with searching the entire handle database on each packet processing.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <samer.el-haj-mahmoud@hp.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>

git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18365 6f19259b-4bc3-4df7-8a09-765794883524
2015-08-31 07:44:12 +00:00
Dandan Bi b965bd99c5 Remove Framework HII "class\subclass" in all VFR
class/subclass is the obseleted key word in VFR file. It is designed in framework HII.
After convert to UEFI HII, it is not used any longer. Now remove them from VFR

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>

git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17493 6f19259b-4bc3-4df7-8a09-765794883524
2015-05-21 07:58:12 +00:00
Fu Siyuan cca5e4221b Remove duplicate DAD entry in IP6 driver to fix DAD fail issue.
The IP6 driver may create duplicate IP6_DAD_ENTRY in DupAddrDetectList in some situation like:
1. Address policy switch but not clear the delay node list, OR
2. Set manual address repeatedly before the previous DAD is finished.
The NS sent out by duplicate DAD entry will mix up with the loop back multicast packet, result in DAD fail.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>

git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17263 6f19259b-4bc3-4df7-8a09-765794883524
2015-04-29 05:47:03 +00:00
Shumin Qiu 5edac28e83 NetworkPkg: Fix typo.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Shumin Qiu <shumin.qiu@intel.com>
Reviewed-by: Ting Ye <ting.ye@intel.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
Reviewed-by: Mudusuru Giri P <giri.p.mudusuru@intel.com>



git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17049 6f19259b-4bc3-4df7-8a09-765794883524
2015-03-16 01:46:32 +00:00
Randy Pawell 8f586b85c3 NetworkPkg: Source fixes and cleanup for ARMGCC compiles
- Fix EFI_IPv4_ADDRESS usages to use a macro to copy the structure
   instead of direct assignment, to avoid runtime alignment errors.
- Delete excess local variables that are initialized but otherwise unused.
- Add LibraryClasses.ARM & AARCH64 section in NetworkPkg.dsc file,
   containing a CompilerIntrinsicsLib null-library, required for successful
  standalone package builds (copied from MdeModulePkg.dsc).

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Randy Pawell <randy_pawell@hp.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>


git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16472 6f19259b-4bc3-4df7-8a09-765794883524
2014-12-04 00:55:50 +00:00
Eric Dong 79e1ffbdd4 Clean up the code. Action statement should not have text two opcode.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>



git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16221 6f19259b-4bc3-4df7-8a09-765794883524
2014-10-21 05:48:00 +00:00
Fu, Siyuan ae97201c55 1. Update PXE driver to support PXEv6 boot cross subnet.
2. Update IP6 driver to use previous configured prefix length if a pre-exist IP6 address with unspecified prefix length.
3. Add NULL check for Dhcp protocol pointer before it decline the address in Ip6ConfigSetStatefulAddrCallback() function.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu, Siyuan <siyuan.fu@intel.com>
Reviewed-By: Ye, Ting (ting.ye@intel.com)
Reviewed-By: Wu, Jiaxin <jiaxin.wu@intel.com>

git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16131 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-18 11:44:36 +00:00
Gao, Liming 537dafa90a NetworkPkg: Convert non DOS format files to DOS format
Module UNI and Package UNI files are not DOS format. Convert them to DOS format.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gao, Liming <liming.gao@intel.com>

git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16049 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-03 08:50:27 +00:00
Dong, Guo f0dab4d018 NetworkPkg: INF/DEC file updates to EDK II packages
2. Add MODULE_UNI_FILE file that contains the localized Abstract and Description of a module.
a. Addresses an information gap between INF files and the UEFI Distribution Packaging Specification XML schema
b. There will be an associated update to UPT in BaseTools to consume MODULE_UNI_FILE and associated UNI file during UDP creation that performs the INF -> XML conversion.
c. There will be an associated update to UPT in BaseTools to produce MODULE_UNI_FILE and associated UNI file during UDP installation that performs the XML -> INF conversion.

3. Add Module Extra UNI file that provides the localized Name of a module.
a. [UserExtensions.TianoCore."ExtraFiles"] provides an easy method for a module to specify extra files not listed in [Sources] or [Binaries] sections to be added to a UDP without having to list the files in the UPT package information data file.
b. There will be an associated update to UPT in BaseTools to package up files listed in [UserExtensions.TianoCore."ExtraFiles"] during UDP creation.
c. UNI file contains localized name of a module to go along with the localized Abstract and Description from the MODULE_UNI_FILE.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dong, Guo <guo.dong@intel.com>
Reviewed-by: Gao, Liming <liming.gao@intel.com>

git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15960 6f19259b-4bc3-4df7-8a09-765794883524
2014-08-28 06:18:03 +00:00
Dong, Guo 332be0dbfa NetworkPkg: INF/DEC file updates to EDK II packages
2. Add MODULE_UNI_FILE file that contains the localized Abstract and Description of a module.
a. Addresses an information gap between INF files and the UEFI Distribution Packaging Specification XML schema
b. There will be an associated update to UPT in BaseTools to consume MODULE_UNI_FILE and associated UNI file during UDP creation that performs the INF -> XML conversion.
c. There will be an associated update to UPT in BaseTools to produce MODULE_UNI_FILE and associated UNI file during UDP installation that performs the XML -> INF conversion.

3. Add Module Extra UNI file that provides the localized Name of a module.
a. [UserExtensions.TianoCore."ExtraFiles"] provides an easy method for a module to specify extra files not listed in [Sources] or [Binaries] sections to be added to a UDP without having to list the files in the UPT package information data file.
b. There will be an associated update to UPT in BaseTools to package up files listed in [UserExtensions.TianoCore."ExtraFiles"] during UDP creation.
c. UNI file contains localized name of a module to go along with the localized Abstract and Description from the MODULE_UNI_FILE.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dong, Guo <guo.dong@intel.com>
Reviewed-by: Gao, Liming <liming.gao@intel.com>

git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15947 6f19259b-4bc3-4df7-8a09-765794883524
2014-08-28 05:26:24 +00:00
Dong, Guo 8ef3af3967 NetworkPkg: INF/DEC file updates to EDK II packages
1. Usage information in INF file comment blocks are either incomplete or incorrect.  
This includes usage information for Protocols/PPIs/GUIDs/PCDs/HOBs/Events/BootModes.  
The syntax for usage information in comment blocks is defined in the EDK II Module Information (INF) Specification

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dong, Guo <guo.dong@intel.com>
Reviewed-by: Gao, Liming <liming.gao@intel.com>

git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15946 6f19259b-4bc3-4df7-8a09-765794883524
2014-08-28 05:23:58 +00:00
Fu, Siyuan a4faf336ea Use string pointer instead string buffer to avoid string copy operation.
Use CopyMem() to guarantee the NULL terminal will always be appended to the destination string.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu, Siyuan <siyuan.fu@intel.com>
Reviewed-by: Yao, Jiewen <jiewen.yao@intel.com>

git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15810 6f19259b-4bc3-4df7-8a09-765794883524
2014-08-15 05:33:34 +00:00
Fu, Siyuan 2922e29ad8 Update network stack code to use StrnCpy instead of StrCpy.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu, Siyuan <siyuan.fu@intel.com>
Reviewed-By: Dong, Eric <eric.dong@intel.com>
Reviewed-by: Wu, Jiaxin <jiaxin.wu@intel.com>

git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15773 6f19259b-4bc3-4df7-8a09-765794883524
2014-08-08 00:41:14 +00:00
Eric Dong 94866d4035 Update code to support VS2013 tool chain.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>

git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15693 6f19259b-4bc3-4df7-8a09-765794883524
2014-07-28 07:43:23 +00:00
Eric Dong 393a3169c2 Refine code to make it more safely.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>




git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15589 6f19259b-4bc3-4df7-8a09-765794883524
2014-06-25 05:44:37 +00:00
Fu Siyuan d551cc64cd 1. Mark the network volatile variables as deprecated in code comments and remove related code to set/get these variable.
2. Remove the GetTime() call when receiving Udp4/6 packets.
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye, Ting <ting.ye@intel.com>
Reviewed-by: Wu, Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0

git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15497 6f19259b-4bc3-4df7-8a09-765794883524
2014-05-07 06:17:31 +00:00
Fu Siyuan cc0b145e0f Fix a bug in IP driver that the fragment overlap check may be skipped incorrectly.
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye, Ting <ting.ye@intel.com>
Reviewed-by: Jin, Eric <eric.jin@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0

git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15443 6f19259b-4bc3-4df7-8a09-765794883524
2014-04-10 02:25:49 +00:00
Ye Ting 8fedfc04d9 Fixed the issue that IPv6 network stack assert infrequently – assert once every 300~400 PXE boots.
Signed-off-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ouyang Qian <qian.ouyang@intel.com>



git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14422 6f19259b-4bc3-4df7-8a09-765794883524
2013-06-14 08:18:34 +00:00
sfu5 fdc4b0b147 Making the IP6_CONFIG_DATA_RECORD the same size for both IA32 and X64 builds.
Signed-off-by: Kinney, Michael D <michael.d.kinney@intel.com> 
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>


git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14216 6f19259b-4bc3-4df7-8a09-765794883524
2013-03-20 08:35:24 +00:00
sfu5 e464225ca6 Remove HiiUpdateForm from ExtractConfig fucntion.
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Dong Eric <eric.dong@intel.com>


git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14215 6f19259b-4bc3-4df7-8a09-765794883524
2013-03-20 08:30:05 +00:00
tye1 130df89019 Update IPv6 configuration UI: 1) keep addresses blank when enter ‘Advanced Configuration’ page; 2) Save parameters in ‘Advanced Configuration’ immediately when user press ‘Commit Changes and Exit’ .
Signed-off-by: Ye Ting  <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ouyang Qian <qian.ouyang@intel.com>

git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14047 6f19259b-4bc3-4df7-8a09-765794883524
2013-01-15 02:19:42 +00:00
sfu5 f8c075d112 1. Fix buffer overflow bugs in SNP, MNP and IP6 driver.
2. Fix GCC build fail issue in DxeNetLib.

Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Ouyang Qian <qian.ouyang@intel.com>

git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14017 6f19259b-4bc3-4df7-8a09-765794883524
2012-12-24 02:52:27 +00:00
sfu5 1f7eb561d9 Fix GCC build fail issue for MdeModulePkg and NetworkPkg.
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Ouyang Qian <qian.ouyang@intel.com>

git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14007 6f19259b-4bc3-4df7-8a09-765794883524
2012-12-17 06:48:35 +00:00
sfu5 216f79703b 1. Add EFI_COMPONENT_NAME2_PROTOCOL.GetControllerName() support.
2. Fix the driver binding Stop() hang issue in the network stack.
3. Add Ip4 raw data support.
4. Add iSCSI Dhcp option 60 support.

Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Ouyang Qian <qian.ouyang@intel.com>

git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13995 6f19259b-4bc3-4df7-8a09-765794883524
2012-12-13 06:47:06 +00:00
tye1 f269f2afa1 Add manual configured gateway address back after system reset.
Signed-off-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Ouyang Qian <qian.ouyang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>

git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13860 6f19259b-4bc3-4df7-8a09-765794883524
2012-10-17 08:41:49 +00:00
sfu5 75dce34062 1. Fix a bug in PXE driver that the PXE boot do not restart if a new boot option on the different IP stack is selected.
2. Retrieve the IP information after iSCSI TCPv6 connection established and fill it into iBFT table.
3. Generate a random IAID for each NIC port to require different IPv6 address in PXE driver.
4. Update function EfiMtftp6Configure() and Mtftp6RrqHandleOack() to allocate at most one UdpIo.
5. Fix a typo from “destory” to “destroy” in network code.

Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Ouyang Qian <qian.ouyang@intel.com>

git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13859 6f19259b-4bc3-4df7-8a09-765794883524
2012-10-17 08:23:41 +00:00
tye1 0b2a54e2af Fixes issues with "Discard Changes and Exit" option in IPv6 driver's Advance Configuration menu.
Signed-off-by: Ye Ting<ting.ye@intel.com>
Reviewed-by: Qianouyang <qian.ouyang@intel.com>
Reviewed-by: Fu, Siyuan <Siyuan.fu@intel.com>




git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13229 6f19259b-4bc3-4df7-8a09-765794883524
2012-04-28 09:43:31 +00:00