The AllocateCopyPool in function ExtractFileNameFromDevicePath
may return NULL, so need to do error handling. This patch is to
add error handling codes for function ExtractFileNameFromDevicePath
and its caller functions.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
This is a enhancement to support the case when platform firmware
doesn't support Boot Manager Menu. For now, if BootManagerMenu FFS
can not be retrieved from FV, BDS core code will still register a
boot option for it. Then, this non-functional boot option will
still be booted by user's request (like HotKey or Exit from shell)
to cause additional boot time and error status code reported.
Therefore, it would be good to skip BootManagerMenu boot option
registration and then return error status and Invalid BootOption
data for this case so that the BootManagerBoot() or other consumers
can directly return without doing anything.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Sunny Wang <sunnywang@hpe.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
When a driver also uses a same name, there will be a link error:
one or more multiply defined symbols found.
Use a specific name for mSmst to avoid the link error.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
After booting a large-size ISO RAM disk (HTTP boot option pointing to
a ISO file) and reboot system, system will possibly run into the
following ASSERT because the BDS core code doesn't consider the
case that Memory page management (Page.c) would possibly NOT update
current memory usage statistics(CurrentMemoryTypeInformation) if
system allocates a memory buffer with a large number of pages.
ASSERT [DxeCore] u:\MdeModulePkg\Core\Dxe\Gcd\Gcd.c(2273):
Length >= MinimalMemorySizeNeeded
The BDS code block for skipping counting reserved memory occupied
by RAM Disk didn't consider the Memory page management's behavior
mentioned above, which caused that the
CurrentMemoryTypeInformation[Index1].NumberOfPages will be updated
to a "very big value" because RamDiskSizeInPages is bigger than
CurrentMemoryTypeInformation[Index1].NumberOfPages. For example,
NumberOfPages is 0x9000 (current use) and RamDiskSizeInPages is
0xC0000 (ISO image size). The result will become a very big value
0xFFF49000.
Therefore, we need to add a check to prevent BDS core code updating
wrong data (very big value) to MemoryTypeInformation variable. This
code change is a improvement for fixing this issue for most cases.
There is still a corner case even when the memory bins don't include
the RAM disk memory, the memory used by all other modules exceeds
RamDiskSizeInPages. Ray will send the other patch to fix this corner
case.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Sunny Wang <sunnywang@hpe.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Ruiyu Ni <Ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
It is the follow up of 3ab41b7a32
to replace UnicodeStrToAsciiStr/AsciiStrToUnicodeStr with
UnicodeStrToAsciiStrS/AsciiStrToUnicodeStrS.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The connect all action has been done in UiApp,
no need to do it when update boot manager form.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
There is static scan tool reports BootScriptSave.c:628:'mSmst' is
explicitly dereferenced.
The patch is to check (mSmst != NULL) before freeing SMRAM at
BootScriptSave.c:628.
Cc: Shumin Qiu <shumin.qiu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Shumin Qiu <shumin.qiu@intel.com>
Add gPerformanceProtocolGuid in BdsDxe.inf explicitly.
Currently, BdsDxe could build pass as it inherits
gPerformanceProtocolGuid from UefiBootManagerLib.inf.
Also update the usage of gPerformanceProtocolGuid in UefiBootManagerLib.inf.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
With a destructor implemented, the shortcut from 058196bbb3
should be unnecessary.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
PiDxeS3BootScriptLib has a constructor S3BootScriptLibInitialize() that
registers ready-to-lock callback S3BootScriptSmmEventCallBack() and several
more. The library is linked to SMM modules. If the module entry-point
function returns error (because of lack of resources, unsupported,
whatever), the module will be unloaded and the notify callback pointers
will point to undefined memory. On ready-to-lock exception occurs when
calling S3BootScriptSmmEventCallBack(), and probably all the other
callbacks registered by the constructor would also cause exception.
This patch is to implement library Destructor to free the resources
allocated by S3BootScriptLibInitialize() and unregister callbacks.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
SmmLockBoxSmmLib is linked to SMM modules. If the module entry-point
function returns error, the module will be unloaded and the global
variables will point to undefined memory.
This patch is to add DESTRUCTOR SmmLockBoxSmmDestructor to uninstall
SmmLockBoxCommunication configuration table if it has been installed
in Constructor.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Prevent the BmRepairAllControllers routine in an infinite loop
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Li <garyli@hpe.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
In current code, BootManagerUiLib is not BDS scope.
So we remove bds keyword in the function name.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
In current code, BootMaintenanceManagerUiLib is not BDS scope.
So we remove bds keyword in the function name.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
In current code, we use different output modes for boot phase
and setup phase. When split BootMaintenanceMangerUiLib from
UiApp code, we not add logic to save the boot phase mode info
which will be used later. This change add this logic.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
In current code, we use different output modes for boot phase
and setup phase. When split BootManagerUiLib from UiApp code,
we not add logic to save the boot phase mode info which will
be used later. This change add this logic.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Static storage duration objects that are internal to a library instance
should:
- either have internal linkage (i.e., be declared STATIC),
- or, if they are referenced in multiple files of the library instance,
prefixed with a word that is specific to the library instance, and
minimizes namespace collisions.
In this case, the "gHiiDriverList" variable (with static storage duration
and external linkage) is defined in both BootMaintenanceManagerUiLib and
UiApp. When these are linked together, GCC catches the multiple external
definitions and aborts the build. (GCC notices this due to commit
214a3b79417f.) Fix the error by applying the first rule above.
Fixes: a85be3ae48
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Change file arrangement to let user easy customize the BMM UI.
After this change:
1. UiCustomizeBMMPage function in BootMaintenanceManagerCustomizedUi.c
use to let user customize BMM first page menus. UiBMMCallbackHandler
function use to handle the callback for the added menus.
2. BootMaintenanceManagerCustomizedUiSupport.c file used to add support
functions used by BootMaintenanceManagerCustomizedUi.c file.
3. After this change, only above two files need to be updated if BMM
first page menus needed to be changed.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
HttpGenRequestMessage assumes that HTTP message would always
contain a request-line, headers and an optional message body.
However, subsequent to a HTTP PUT/POST request, HTTP requests
would contain just the message body. This patch supports
creation of such request messages with additional checks.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hegde, Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-By: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
when there's no volume label 'Info' can be NULL
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Zimmermann <sigmaepsilon92@gmail.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Remove DeployedMode & AuditMode Global variable check for Customized Secure Boot feature defined in UEFI2.5 Mantis 1263.
The feature has been moved to
https://github.com/tianocore/edk2-staging/tree/Customized-Secure-Boot
Previous check-in hash is
SHA-1: 0f4f6d202a
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: El-Haj-Mahmoud Samer <samer.el-haj-mahmoud@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
This patch enhance performance data SMM communication by using fixed
SMM communication buffer.
Update PerformanceLib to use fixed SMM communication buffer to get
performance data by SMM_PERF_COMMUNICATE API.
This is designed to meet Microsoft WSMT table definition on FIXED_COMM_BUFFERS
requirement.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
In the edk2 tree, there are currently four drivers that consume
PcdAcpiS3Enable:
IntelFrameworkModulePkg/Universal/Acpi/AcpiS3SaveDxe/AcpiS3SaveDxe.inf
MdeModulePkg/Universal/Acpi/BootScriptExecutorDxe/BootScriptExecutorDxe.inf
MdeModulePkg/Universal/Acpi/S3SaveStateDxe/S3SaveStateDxe.inf
MdeModulePkg/Universal/Acpi/SmmS3SaveState/SmmS3SaveState.inf
From these, AcpiS3SaveDxe is the only one that isn't also a client of the
S3BootScriptLib class; all the others (BootScriptExecutorDxe,
S3SaveStateDxe, SmmS3SaveState) are clients of the S3BootScriptLib class.
In turn, the edk2 tree contains only one non-Null instance of the
S3BootScriptLib class:
MdeModulePkg/Library/PiDxeS3BootScriptLib/DxeS3BootScriptLib.inf
Therefore we can safely state that BootScriptExecutorDxe, S3SaveStateDxe,
and SmmS3SaveState are all linked against PiDxeS3BootScriptLib.
Now, if PcdAcpiS3Enable is FALSE when either of BootScriptExecutorDxe,
SmmS3SaveState, or SmmS3SaveState is dispatched, then the following
happens:
- The constructor of PiDxeS3BootScriptLib, function
S3BootScriptLibInitialize(), registers a protocol installation callback
for gEfiDxeSmmReadyToLockProtocolGuid. Namely, the function
S3BootScriptEventCallBack().
- The driver immediately exits with EFI_UNSUPPORTED from its entry point
function, upon seeing PcdAcpiS3Enable == FALSE. (See commits
800c02fbe2, 125e093876, and d2d38610603f6.)
- This leaves a dangling callback pointer in the DXE core.
- When Platform BDS installs gEfiDxeSmmReadyToLockProtocolGuid (which is a
valid thing to do for locking down SMM, even in the absence of S3
support!), things blow up.
Fix this issue by returning immediately from S3BootScriptLibInitialize()
if PcdAcpiS3Enable is FALSE -- it is useless to initialize the library
instance if the containing driver module exits first thing in its entry
point.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jaben Carsey <Jaben.carsey@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Rename and update the logic of HttpGenRequestString API provided
by DxeHttpLib. The RequestString size is returned as an argument.
The user is not expected to do a AsciiStrLen anymore, and is not
logical too, since request string can contain message body and
using AsciiStrLen on such a string can provide truncated lengths.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Nagaraj Hegde <nagaraj-p.hegde@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
This library instance is PEIM type, not BASE type. It has the PPI
dependency for PEIM.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
In PerformanceLib, Identifier is for single PERF, not the pair of PERF.
When find the matched START and END pair, the identifier will not be checked.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Add 2 macros inNetLib.h
#define IP4_MASK_MAX 32
#define IP6_PREFIX_MAX 128
we will use these two macros to check the max mask/prefix length,
instead of
#define IP4_MASK_NUM 33
#define IP6_PREFIX_NUM 129
which means a valid number.
This will make the code readability and maintainability.
Cc: Subramanian Sriram <sriram-s@hpe.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Redfine the BmIsValidLoadOptionVariableName function to allow public use. Change name to EfiBootManagerIsValidLoadOptionVariableName to match naming scheme. Check that VariableName is never NULL and allow OptionType and OptionNumber to be optional.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Thomas Palmer <thomas.palmer@hpe.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
MemoryTypeInformation don't count the reserved memory used by RAM Disk,
but it still check all types of memory and do reset when any type
of memory size changes.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
The resource free includes to un-register the ram disk device and
free the memory occupied by the ram disk.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Use reserved memory to hold the buffer for the RAM disk to
follow the ACPI spec requirement.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Commit 1b31acb66c ("MdeModulePkg: Check received packet size before use
it.") introduced a chunk of code under the new "Resume" label, in function
UdpIoOnDgramRcvdDpc(). The new code is supposed to run only when the
received packet has zero-length payload, but a "return" statement was
forgotten, and the code is reached on the normal (nonzero-length payload)
path as well, after the packet has been processed (and possibly freed) by
RxToken->CallBack(). This is a logic bug, with the direct symptom being
use-after-free / General Protection Fault.
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Ting Ye <ting.ye@intel.com>
Cc: "Subramanian, Sriram (EG Servers Platform SW)" <sriram-s@hpe.com>
Fixes: 1b31acb66c
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Arbitrary length of packet may be received from network, including the
packets with zero payload data or malformed protocol header. So the code
much check the actually received data size before using it. For example, in
current edk2 network stack, an zero payload UDP packet may cause the
platform ASSERT in NetbufFromExt() because of the zero fragment number.
This patch update the IpIoLib and UdpIoLib to check and discard the zero
payload data packet to avoid above assert. Some other network drivers are
also updated to check the packet size to guarantee the minimum length of
protocol header is received from upper layer driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Check for NULL from AllocateCopyPool before setting Count to 1. Also
change sizeof (EFI_HANDLE*) to sizeof (EFI_HANDLE). Handles is a
EFI_HANDLE pointer, so the allocated memory must be the size of
EFI_HANDLE.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Thomas Palmer <thomas.palmer@hpe.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
The type casting is not necessary and now remove it.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Gary Lin <glin@suse.com>
The BootMaintenanceManagerUiLib use ChooseFile() from FileExplorerLib
to select files. And the third parameter in ChooseFile() is CHOOSE_HANDLER,
per the definition of CHOOSE_HANDLER, it must use EFIAPI as the calling
convention. But the calling convention was not specified for following
handlers: CreateBootOptionFromFile, CreateDriverOptionFromFile,
BootFromFile. Now specifies the calling convention for those functions.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Gary Lin <glin@suse.com>
Do not locate VarCheck protocol in Constructor, then the
gEdkiiVarCheckProtocolGuid could be removed from [Depex].
It will be more flexible for the library Consumer to work without VarCheck
protocol installed, for example at recovery boot mode with EmuRuntimeDxe.
The unused UefiLib is also been removed from [LibraryClasses] in *.inf.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Remove the ASSERT in UI code that may be triggered,
and clean up the useless code.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
There some usefull functions in edk2 private modules that could be used,
so we added them to the httpLib
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ghazi Belaam <Ghazi.belaam@hpe.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Samer EL-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
The maximum number of PEI performance log entries is 255.
Add a new PCD, PcdMaxPeiPerformanceLogEntries16, to increase the maximum
number of PEI performance log entries.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Cinnamon Shia <cinnamon.shia@hpe.com>
Reviewed-by: Samer EL-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Joseph Shifflett <joseph.shifflett@hpe.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The patch enhances the UefiBootManagerLib to use more user-friendly
network boot option description.
It builds description like below:
"PXEv6 (MAC:112233445566 VLAN1)"
"HTTPv4 (MAC:112233445566)"
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
Enhance BDS to support booting from a remote file system exposed
by a HTTP boot option.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
The patch adds short-form URI boot support to follow
UEFI Spec.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
Enhance BDS to wide match the HTTP boot option without matching
the specific device path data in IP device path and URI device
path node.
It's to follow UEFI Spec 2.6.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
Change BmGetFileBufferByMemmapFv to BmGetFileBufferByFvFilePath.
The original function gets the file buffer only from memory mapped
FV device path and leaves GUIDed FV device path to the code below;
The new function gets the file buffer from both formats of FV device
paths.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
Currently the EFI_FILE_EXPLORE_FORMSET_GUID value in BdsDxe in
IntelFrameworkModulePkg is same with the GUID VALUE in FileExplorerLib.
This patch is to modify the EFI_FILE_EXPLORE_FORMSET_GUID in
FileExplorerLib to avoid potential issue.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
when free up resource allocated for a MenuEntry, there exists
the case that the DevicePath and DisplayString are NULL,
so before calling FreePool function, need to check.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
This patch is to add a new interface to get the "Path" component according to
the URI parse result, it would be helpful for the library user to extract the
file path value in a URI.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
This is caused by my last commit,the LoadOption may
not initialize when call FreePool, and after investigation,
find that we can delete the LoadOption variable, this patch
is to fix this issue.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Refine the code in function Var_UpdateDriverOption and Var_UpdateBootOption,
use the existed API(EfiBootManagerInitializeLoadOption and
EfiBootManagerAddLoadOptionVariable) supplied by UefiBootManagerLib
to replace the same logic in the two functions. And remove the useless
code.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This patch is used to define a general function to create
DNS QName.
QName is a domain name represented as a sequence
of labels, where each label consists of a length octet
followed by that number of octets. The domain name terminates
with the zero length octet for the null label of the root.
Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Cc: El-Haj-Mahmoud Samer <samer.el-haj-mahmoud@hpe.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Avoid any confusion,add the keyword "Ui",
user can understand the use of the library clearly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19666 6f19259b-4bc3-4df7-8a09-765794883524
Avoid any confusion,add the keyword "Ui",
user can understand the use of the library clearly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19664 6f19259b-4bc3-4df7-8a09-765794883524
Avoid any confusion,add the keyword "Ui",
user can understand the use of the library clearly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19662 6f19259b-4bc3-4df7-8a09-765794883524
When overriding compiler options '/GL' with '/GL-', VS2010 will report
warning C4701 potentially uninitialized local variable for 'LcrParity'
and 'LcrStop' in function SerialPortSetAttributes().
This commit fixes this build issue.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19628 6f19259b-4bc3-4df7-8a09-765794883524
Change EfiBootManagerDeleteLoadOptionVariable() to not just
remove #### from BootOrder but also remove Boot#### variable.
The old behavior tries to do less for performance but it leaves
unreferenced Boot#### which cannot be reclaimed in variable
reclaim operation though the Boot#### will be eventually be overwritten
by EfiBootManagerAddLoadOptionVariable().
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19626 6f19259b-4bc3-4df7-8a09-765794883524
Currently the invalid boot next set to the number of boot option,
when add a new boot option,also need update the boot next value,
otherwise it will be incorrect.Now set the type of BootNext value
to UINT32,the number out of the range of UINT16 means it is an
invalid BootNext Value.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19591 6f19259b-4bc3-4df7-8a09-765794883524
When do UiApp remodeling task,miss clearing the screen before booting
the selected boot option,so cause some behaviors change.Now add the code
to fix this issue.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19441 6f19259b-4bc3-4df7-8a09-765794883524
Currently BootManager is an independent library,used by UiApp.It only load boot
option when enter UiApp.So when add boot option through boot maintenance manager,
it will not display in boot manager. In order to fix this issue,now we update the
boot manager form every time we enter it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19440 6f19259b-4bc3-4df7-8a09-765794883524
When HttpLib parsing the last chunked data down, the Http NextMsg pointer
in the HttpBodyParserCallback function should point to the character
after '/n' flag.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19310 6f19259b-4bc3-4df7-8a09-765794883524
The caller has initial the input parameter before call this function, So this code is useless.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19302 6f19259b-4bc3-4df7-8a09-765794883524
DeployedMode & AuditMode are UINT8 Global variable according to Enable Secure Boot feature defined in UEFI2.5 Mantis 1263. Add them to var check list.
https://mantis.uefi.org/mantis/view.php?id=1263
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Zeng Star <star.zeng@intel.com>
Reviewed-by: Long Qin <qin.long@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19131 6f19259b-4bc3-4df7-8a09-765794883524
If the assert happens in a library, then it's hard to determine which module
using that library is generating that assert. Use gEfiCallerBaseName in
DebugAssert to display the module name.
V2: Updated code to use copy mem and ModuleNameSize calculation.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Baraneedharan Anbazhagan <anbazhagan@hp.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19128 6f19259b-4bc3-4df7-8a09-765794883524
BDS puts a special GUID in boot option optional data for
auto-discovered boot option. But when launching that boot
option, the BDS core unconditionally pass the special GUID
to the executable.
A good written application/OS loader can ignore the unexpected
parameters, but BDS core should still avoid passing the
unnecessary GUID.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19007 6f19259b-4bc3-4df7-8a09-765794883524
Add comments in INF file in BootMaintenanceManagerLib.inf.
Refine the comments in INF file in FileExplorerLib.inf
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18975 6f19259b-4bc3-4df7-8a09-765794883524
Align to old BDS behavior (IntelFrameworkModulePkg/BDS) to always create
MemoryTypeInfo variable regardless of the PcdResetOnMemoryTypeInformationChange
value.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18926 6f19259b-4bc3-4df7-8a09-765794883524
Split the boot maintenance manager library from UiApp in MdeModulePkg/Application
and put the library in MdeModulePkg/Library.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18923 6f19259b-4bc3-4df7-8a09-765794883524
Split the device manager library from UiApp in MdeModulePkg/Application
and put the library in MdeModulePkg/Library.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18922 6f19259b-4bc3-4df7-8a09-765794883524
Split the boot manager library from UiApp in MdeModulePkg/Application
and put the library in MdeModulePkg/Library.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18921 6f19259b-4bc3-4df7-8a09-765794883524
This library wrapper explorer protocol and produce the file explorer library.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18919 6f19259b-4bc3-4df7-8a09-765794883524
This library support select one file from the specified directory or from system root directory.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18917 6f19259b-4bc3-4df7-8a09-765794883524
The "read" word in SerialPortWrite() header comment block should be
"write".
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18910 6f19259b-4bc3-4df7-8a09-765794883524
The parameter name is also changed from Coordinate* to Offset* to
reflect that it's the offset to the location specified by Attribute.
For example, when the Attribute is Center, OffsetX and OffsetY are
used to specify the offset to the Center. OffsetX = 100 means
100 pixels right to the Center.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18867 6f19259b-4bc3-4df7-8a09-765794883524
The patch also moves the BmCharToUint to BmMisc.c because it
belongs to misc functions.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18855 6f19259b-4bc3-4df7-8a09-765794883524
The RestoreLockBox() and RestoreAllLockBoxInPlace() functions handle the
case when EFI_PEI_SMM_COMMUNICATION_PPI.Communicate() returns
EFI_NOT_STARTED: they access the SMRAM directly, for restoring LockBox
data.
This occurs if a PEIM needs to restore LockBox data *before* the SMBASE is
relocated and the SMI handler is installed for all processors.
One such PEIM is UefiCpuPkg/Universal/Acpi/S3Resume2Pei. On the S3 resume
path, in function S3RestoreConfig2(), LockBox data are restored *before*
the SmmRestoreCpu() function of UefiCpuPkg/PiSmmCpuDxeSmm is called via
SmmS3ResumeState->SmmS3ResumeEntryPoint. (The latter SmmRestoreCpu()
function is responsible for the SMBASE relocation.)
If a platform knows that its PEIMs restore LockBox data *only* before
SMBASE relocation -- e.g., due to S3Resume2Pei being the platform's only
SmmLockBoxPeiLib client --, then the platform might not want to include
"UefiCpuPkg/PiSmmCommunication/PiSmmCommunicationPei.inf" at all (hence
not provide EFI_PEI_SMM_COMMUNICATION_PPI) -- because all of those
restores would be serviced by direct SMRAM access anyway.
Currently the absence of EFI_PEI_SMM_COMMUNICATION_PPI is not supported by
SmmLockBoxPeiLib, but it's not hard to implement. Handle it the same as
when EFI_PEI_SMM_COMMUNICATION_PPI.Communicate() returns EFI_NOT_STARTED:
restore LockBox data directly from SMRAM.
Suggested-by: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18823 6f19259b-4bc3-4df7-8a09-765794883524
The library itself doesn't provide any image decoding capabilities but
manages the different image decoders.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18770 6f19259b-4bc3-4df7-8a09-765794883524
Previously the pointer type is EFI_IFR_FORM_SET, it is incorrect when
do pointer addition without conversion.Now change it to UINT8 type.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18768 6f19259b-4bc3-4df7-8a09-765794883524
When parsing the authority component of the input URL, it can not distinguish
the ":" is the flag that indicates the port or the separator between
the ipv6 address.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Gary Ching-Pang Lin <glin@suse.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18744 6f19259b-4bc3-4df7-8a09-765794883524
Add a DEBUG statement when the number of PEI perf log entries
exceeds PcdMaxPeiPerformanceLogEntries
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <samer.el-haj-mahmoud@hpe.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18714 6f19259b-4bc3-4df7-8a09-765794883524
This function is mainly through the Hii handle to get the formset opcode.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18684 6f19259b-4bc3-4df7-8a09-765794883524
Make the BmFindLoadOption function public
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Sunny Wang <sunnywang@hpe.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18662 6f19259b-4bc3-4df7-8a09-765794883524
R18611 only updated the logic to return correct property
when no property set to variable with wildcard name.
But VariablePropertySet needs the pointer of property data for set.
So roll back the change in VariablePropertyGetWithWildcardName at R18611,
and check the property revision first in VariablePropertyGet and
SetVariableCheck before using the property data.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18626 6f19259b-4bc3-4df7-8a09-765794883524
to variable with wildcard name.
VarCheckLib has zeroed property for variable with wildcard name
and is waiting for property set. The code should return NULL
when no property set to variable with wildcard name, but not
return the zeroed property that will impact the functionality of
SetVariableCheck.
The issue does not appear with VarCheckUefiLib linked as the library
just has the expected property set.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18611 6f19259b-4bc3-4df7-8a09-765794883524
PcdSet## has no error status returned, then the caller has no idea about whether the set operation is successful or not.
PcdSet##S were added to return error status and PcdSet## APIs were put in ifndef DISABLE_NEW_DEPRECATED_INTERFACES condition.
To adopt PcdSet##S and further code development with DISABLE_NEW_DEPRECATED_INTERFACES defined, we need to Replace PcdSet## usage with PcdSet##S.
Normally, DynamicDefault PCD set is expected to be success, but DynamicHii PCD set failure is a legal case.
For this case, PcdS3BootScriptTablePrivateDataPtr and PcdS3BootScriptTablePrivateSmmDataPtr are expected to be DynamicDefault,
so use PcdSet64S to instead of PcdSet64 and assert when set failure.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18599 6f19259b-4bc3-4df7-8a09-765794883524
Bi, Dandan
Sunny Wang
Star Zeng
Dandan Bi
Gary Li
Dong, Eric
Jiaxin Wu
Laszlo Ersek
Nagaraj Hegde
Michael Zimmermann
Zhang, Chao B
Ruiyu Ni
Liming Gao
Zhang Lubo
Thomas Palmer
Fu Siyuan
Ghazi Belaam
Cinnamon Shia
Hao Wu
Daocheng Bu
Jordan Justen
Baraneedharan Anbazhagan
Samer El-Haj-Mahmoud