NOTE: SetBootOrderFromQemu() interface is not changed.
But when the old IntelFrameworkModulePkg/BDS is no longer used in
OVMF and ArmVirtPkg, additional patch will be submitted to change
this interface to remove parameter BootOptionList.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
QemuNewBootOrderLib will be changed to work with MdeModulePkg/BDS.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Since PlatformBootManagerLib do not run memory test
to convert untested memory to tested.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
At the moment, the EFI_DXE_SMM_READY_TO_LOCK_PROTOCOL is only installed if
S3 is enabled -- at the end of SaveS3BootScript().
While a runtime OS is never booted with SMM unlocked (because the SMM IPL
locks down SMM as a last resort:
> SMM IPL! DXE SMM Ready To Lock Protocol not installed before Ready To
> Boot signal
> SmmInstallProtocolInterface: [EfiSmmReadyToLockProtocol] 0
> Patch page table start ...
> Patch page table done!
> SMM IPL locked SMRAM window
), we shouldn't allow UEFI drivers and applications either to mess with
SMM just because S3 is disabled. So install
EFI_DXE_SMM_READY_TO_LOCK_PROTOCOL in PlatformBdsInit() unconditionally.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
OVMF's PlatformBdsLib currently makes SMM vulnerable to the following
attack:
(1) a malicious guest OS copies a UEFI driver module to the EFI system
partition,
(2) the OS adds the driver as a Driver#### option, and references it from
DriverOrder,
(3) at next boot, the BdsEntry() function in
"IntelFrameworkModulePkg/Universal/BdsDxe/BdsEntry.c" processes
Driver#### and DriverOrder between the calls to PlatformBdsInit() and
PlatformBdsPolicyBehavior(),
(4) OVMF locks down SMM only in PlatformBdsPolicyBehavior(), hence the
driver runs with SMM unlocked.
The BdsEntry() function of the MdeModulePkg BDS driver (in file
"MdeModulePkg/Universal/BdsDxe/BdsEntry.c") recommends to "Signal
ReadyToLock event" in PlatformBootManagerBeforeConsole() -- which
corresponds to PlatformBdsInit() --, not in
PlatformBootManagerAfterConsole() -- which corresponds to
PlatformBdsPolicyBehavior().
Albeit an independent question, but it's worth mentioning: this patch also
brings OvmfPkg's PlatformBdsInit() closer to ArmVirtPkg's. Namely, the
latter signals End-of-Dxe in PlatformBdsInit() already.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
It would be possible to remove the UAF without local variables, by calling
SataPrivateData->PciIo->Attributes() before releasing SataPrivateData.
However, by keeping the location of the call (for which temporary
variables are necessary), we continue to match the error path logic in
SataControllerStart(), which is always recommended.
Reported-by: wang xiaofeng <winggundum82@163.com>
Fixes: bcab714134
Cc: wang xiaofeng <winggundum82@163.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
"ASSERT (SataPrivateData != NULL)" is just a few lines higher up.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
XenIoMmioLib depends on MemoryAllocationLib, and uses its header, but
failed to declare the dependency in its INF.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This driver is now unused.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
It's been a month since the following commits appeared in the repo:
4014885ffd OvmfPkg: switch to MdeModulePkg/Bus/Pci/PciHostBridgeDxe
c47ed6fcb5 OvmfPkg: match PCI config access to machine type (if not
USE_OLD_PCI_HOST)
in which we introduced the USE_OLD_PCI_HOST fallback, and made other work
depend on it. I have not heard of any problems (primarily from the
vfio-users group that uses Gerd's daily / hourly OVMF builds), so it's
time to drop the fallback.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Now that FatPkg is open source (and therefore can be included in the
EDK II tree) we build and use it directly.
Build tested with GCC 5.3 on IA32 and X64. Boot tested to UEFI Shell
on IA32 and UEFI Linux on X64.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The same functional code has been in S3SaveStateDxe,
OVMF AcpiS3SaveDxe can be retired now.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Currently, the LockBox protocol is installed in entrypoint of
OVMF AcpiS3SaveDxe.
We can let the first driver run with LockBoxDxeLib linked to have its
library constructor to install LockBox protocol on the ImageHandle.
As other drivers may have gEfiLockBoxProtocolGuid dependency,
the first driver should run before them.
The later patches to retire AcpiS3SaveDxe for OVMF depends on this patch.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Also need to declare PcdAcpiS3Enable as DynamicDefault in *.dsc.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Edk2 commit 8a45f80eda ("MdeModulePkg: Make HII configuration settings
available to OS runtime") implements the optional UEFI feature described
in "31.2.11.1 OS Runtime Utilization" in UEFI v2.6.
While this feature might show benefits down the road even in QEMU virtual
machines, at the moment it only presents drawbacks:
- it increases the EfiRuntimeServicesData footprint,
- it triggers HII compatibility problems between edk2 and external drivers
unconditionally, even if the end-user is not interested in HII and/or in
configuring said drivers (see
<https://www.redhat.com/archives/vfio-users/2016-March/msg00153.html>
and <http://thread.gmane.org/gmane.comp.bios.edk2.devel/9894> for an
example).
While the feature was being introduced, popular demand for a controlling
Feature PCD rose (see
<http://thread.gmane.org/gmane.comp.bios.edk2.devel/7626>), which is why
we can set it now to FALSE.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
PcdMaxHardwareErrorVariableSize sets the size limit for individual
Hardware Error Record Variables (see "7.2.3 Hardware Error Record
Persistence" and "Appendix P, Hardware Error Record Persistence Usage" in
the UEFI-2.6 spec).
Since Hardware Error Record Persistence is an optional firmware feature,
according to the spec, and OVMF does not enable it -- it inherits
PcdHwErrStorageSize and PcdHardwareErrorRecordLevel with zero values --,
the PcdMaxHardwareErrorVariableSize setting in our DSC files has no
effect. Remove it in order to eliminate future confusion.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Suggested-by: Star Zeng <star.zeng@intel.com>
Ref: http://thread.gmane.org/gmane.comp.bios.edk2.devel/9743/focus=9780
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This driver implements the VIRTIO_DEVICE_PROTOCOL for non-transitional PCI
devices, based on the virtio-1.0 specification (csprd05). Non-transitional
means that it only binds QEMU's virtio-xxx-pci devices that receive the
",disable-legacy=on,disable-modern=off" properties on the QEMU command
line. These devices have distinct PCI Device IDs from those that are bound
by VirtioPciDeviceDxe.
The central abstraction of this driver is the VIRTIO_1_0_CONFIG type. It
is practically a "fat pointer" to a register block. The pointed-to
register block
- may or may not exist (the latter being mostly useful for virtio-1.0
devices that have no device-specific registers),
- lives in one of the device's BARs,
- lives in an IO or MMIO BAR,
- lives at an offset relative to the BAR start,
- has its size also maintained.
Such VIRTIO_1_0_CONFIG "fat pointers" (i.e., the locations of the register
blocks) are parsed from vendor capabilities that reside in the device's
standard PCI capabilities list (in PCI config space).
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Jordan Justen <jordan.l.justen@intel.com>
In virtio-0.9.5, the size of the virtio-net packet header depends on
whether the VIRTIO_NET_F_MRG_RXBUF feature is negotiated -- the
"num_buffers" field is only appended to the header if the feature is
negotiated.
Since we never negotiate this feature, VirtioNetDxe never allocates room
for the "num_buffers" field.
With virtio-1.0, the "num_buffers" field is always there (although it
doesn't carry useful information without VIRTIO_NET_F_MRG_RXBUF). Adapt
the buffers that depend on the virtio-net header size (otherwise we have
skewed / truncated packets).
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Relative to virtio-0.9.5, virtio-1.0 reverses the order of queue discovery
and feature negotiation. In virtio-1.0, feature negotiation has to
complete first, and the device can also reject a self-inconsistent feature
request through the new VSTAT_FEATURES_OK status bit. (For example if the
driver requests a higher level feature but clears a prerequisite feature.)
Furthermore, we retain the VIRTIO_F_VERSION_1 feature bit if the
VIRTIO_DEVICE_PROTOCOL provider has high enough revision.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Relative to virtio-0.9.5, virtio-1.0 reverses the order of queue discovery
and feature negotiation. In virtio-1.0, feature negotiation has to
complete first, and the device can also reject a self-inconsistent feature
request through the new VSTAT_FEATURES_OK status bit. (For example if the
driver requests a higher level feature but clears a prerequisite feature.)
Furthermore, we retain the VIRTIO_F_VERSION_1 feature bit if the
VIRTIO_DEVICE_PROTOCOL provider has high enough revision.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Relative to virtio-0.9.5, virtio-1.0 reverses the order of queue discovery
and feature negotiation. In virtio-1.0, feature negotiation has to
complete first, and the device can also reject a self-inconsistent feature
request through the new VSTAT_FEATURES_OK status bit. (For example if the
driver requests a higher level feature but clears a prerequisite feature.)
Furthermore, we retain the VIRTIO_F_VERSION_1 feature bit if the
VIRTIO_DEVICE_PROTOCOL provider has high enough revision.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Relative to virtio-0.9.5, virtio-1.0 reverses the order of queue discovery
and feature negotiation. In virtio-1.0, feature negotiation has to
complete first, and the device can also reject a self-inconsistent feature
request through the new VSTAT_FEATURES_OK status bit. (For example if the
driver requests a higher level feature but clears a prerequisite feature.)
Furthermore, we retain the VIRTIO_F_VERSION_1 feature bit if the
VIRTIO_DEVICE_PROTOCOL provider has high enough revision.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
In VirtIo 1.0, a device can reject a self-inconsistent feature bitmap
through the new VSTAT_FEATURES_OK status bit. (For example if the driver
requests a higher level feature but clears a prerequisite feature.) This
function is a small wrapper around
VIRTIO_DEVICE_PROTOCOL.SetGuestFeatures() that also verifies if the VirtIo
1.0 device accepts the feature bitmap.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
These header files are intentionally minimal, and intentionally kept apart
from the VirtIo 0.9.5 headers.
The header inclusion chains end up like this (the Virtio10*.h header files
in the middle are new):
Virtio.h -> Virtio10.h -> Virtio095.h
^ ^
| |
VirtioNet.h -> Virtio10Net.h -> Virtio095Net.h
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Jordan Justen <jordan.l.justen@intel.com>
In the upcoming virtio-1.0 series, we'll introduce "Virtio10Net.h".
However, the "VirtioNet.h" header file should continue to expose the
Virtio Network Device specific type and macro definitions for all virtio
versions that OvmfPkg supports. Therefore extract "Virtio095Net.h" like
this:
VirtioNet.h -> Virtio095Net.h
so that in the upcoming patches, we can insert "Virtio10Net.h" in the
middle of the inclusion chain.
This follows the example of "Acpi.h" and "Pci.h" under
"MdePkg/Include/IndustryStandard".
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Suggested-by: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
In the upcoming virtio-1.0 series, we'll introduce "Virtio10.h". However,
the "Virtio.h" header file should continue to expose the generic type and
macro definitions for all virtio versions that OvmfPkg supports. Therefore
extract "Virtio095.h" like this:
Virtio.h -> Virtio095.h
so that in the upcoming patches, we can insert "Virtio10.h" in the middle
of the inclusion chain.
This follows the example of "Acpi.h" and "Pci.h" under
"MdePkg/Include/IndustryStandard".
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Suggested-by: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This too is in preparation for the following patches.
After this patch, all four drivers manage their feature bits with explicit
masking.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
VirtioBlkDxe only recognizes virtio-block feature bits that the device
offers non-negotiably. Nonetheless, in preparation for the following
patches, don't try to clear them even for simplicity.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
In virtio-1.0, it is not enough to pass the base address of the virtio
queue to the hypervisor (as a frame number); instead it will want the
addresses of the descriptor table, the available ring, and the used ring
separately. Pass the VRING object to the SetQueueAddress() member
function; this will enable a virtio-1.0 implementation. Convert the
current producers and consumers to this prototype.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This function was never consumed by drivers, and the current prototype is
unsupportable with virtio-1.0. Remove the function from the protocol
definition, and drop the current (unused) implementations.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The virtio-1.0 spec widens the Features bitmap to 64 bits. Modify the
declarations of the GetDeviceFeatures() and SetGuestFeatures() protocol
member functions accordingly.
Normally, a protocol cannot be changed in incompatible ways if the GUID
stays the same; however, we've always been extremely clear that
VIRTIO_DEVICE_PROTOCOL is internal to edk2. See for example the top of
"OvmfPkg/Include/Protocol/VirtioDevice.h".
In this patch, all producers and consumers of the GetDeviceFeatures() and
SetGuestFeatures() protocol members are updated.
The drivers that currently produce these members are "legacy" drivers (in
virtio-1.0 terminology), and they cannot (and will not) handle feature
bits above BIT31. Therefore their conversion is only for compatibility
with the modified protocol interface. The consumers will be responsible
for checking the VIRTIO_DEVICE_PROTOCOL.Revision field, and for not
passing feature bits that these backends cannot handle.
The VirtioMmioGetDeviceFeatures() implementation stores the result of an
MmioRead32() call with normal assignment, so it needs no change beyond
adapting its prototype.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Currently booting off of a RAM disk is not supported by
IntelFrameWorkModulePkg BDS, however on systems without writable
disks, the RAM disk can be made useful when loading raw HDD images
into it -- specially the ones with a FAT32 partition on which files
can be natively accessed by system firmware.
This patch adds RamDiskDxe driver by default in OVMF platform.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Paulo Alcantara <paulo.alc.cavalcanti@hp.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
During real world testing I was getting an error with too many entries
in db: On my Secure boot laptop, I currently have seven certificates:
two Microsoft ones, Three Kernel ones from various distributions, my
own Secure Key and a temporary test key. That gives a total EFI
Signature List size of 8317 which is over the 0x2000 maximum.
Fix this by setting the PcdMaxAuthVariableSize to 0x2800 (10K) which
isn't much of an increase but allows for 9-10 certificates.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
On the normal boot path (which is when PciHostBridgeDxe runs), the PCDs
have been calculated; report the 64-bit PCI host aperture to
PciHostBridgeDxe.
In the Ia32 build, the PCD values (zeros) come directly from the DEC file,
and this patch makes no difference.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Thomas Lamprecht <t.lamprecht@proxmox.com>
Ref: https://github.com/tianocore/edk2/issues/59
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The main observation about the 64-bit PCI host aperture is that it is the
highest part of the useful address space. It impacts the top of the GCD
memory space map, and, consequently, our maximum address width calculation
for the CPU HOB too.
Thus, modify the GetFirstNonAddress() function to consider the following
areas above the high RAM, while calculating the first non-address (i.e.,
the highest inclusive address, plus one):
- the memory hotplug area (optional, the size comes from QEMU),
- the 64-bit PCI host aperture (we set a default size).
While computing the first non-address, capture the base and the size of
the 64-bit PCI host aperture at once in PCDs, since they are natural parts
of the calculation.
(Similarly to how PcdPciMmio32* are not rewritten on the S3 resume path
(see the InitializePlatform() -> MemMapInitialization() condition), nor
are PcdPciMmio64*. Only the core PciHostBridgeDxe driver consumes them,
through our PciHostBridgeLib instance.)
Set 32GB as the default size for the aperture. Issue#59 mentions the
NVIDIA Tesla K80 as an assignable device. According to nvidia.com, these
cards may have 24GB of memory (probably 16GB + 8GB BARs).
As a strictly experimental feature, the user can specify the size of the
aperture (in MB) as well, with the QEMU option
-fw_cfg name=opt/ovmf/X-PciMmio64Mb,string=65536
The "X-" prefix follows the QEMU tradition (spelled "x-" there), meaning
that the property is experimental, unstable, and might go away any time.
Gerd has proposed heuristics for sizing the aperture automatically (based
on 1GB page support and PCPU address width), but such should be delayed to
a later patch (which may very well back out "X-PciMmio64Mb" then).
For "everyday" guests, the 32GB default for the aperture size shouldn't
impact the PEI memory demand (the size of the page tables that the DXE IPL
PEIM builds). Namely, we've never reported narrower than 36-bit addresses;
the DXE IPL PEIM has always built page tables for 64GB at least.
For the aperture to bump the address width above 36 bits, either the guest
must have quite a bit of memory itself (in which case the additional PEI
memory demand shouldn't matter), or the user must specify a large aperture
manually with "X-PciMmio64Mb" (and then he or she is also responsible for
giving enough RAM to the VM, to satisfy the PEI memory demand).
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Thomas Lamprecht <t.lamprecht@proxmox.com>
Ref: https://github.com/tianocore/edk2/issues/59
Ref: http://www.nvidia.com/object/tesla-servers.html
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Factor out the expression that is currently the basis of the address width
calculation into a standalone function. In the next patches we'll raise
the return value under certain circumstances.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Thomas Lamprecht <t.lamprecht@proxmox.com>
Ref: https://github.com/tianocore/edk2/issues/59
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Now that the previous patches ensure that we can access all PCI devices in
AcpiPlatformDxe, we can enable IO and MMIO decoding for all of them while
we contact QEMU for the ACPI tables. See more details in the patch titled:
OvmfPkg: introduce gRootBridgesConnectedEventGroupGuid
In particular, this patch will prevent the bug when the 64-bit MMIO
aperture is completely missing from QEMU's _CRS, and consequently Linux
rejects 64-bit BARs with the error message
pci 0000:00:03.0: can't claim BAR 4 [mem 0x800000000-0x8007fffff 64bit
pref]: no compatible bridge window
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This patch doesn't change the behavior of AcpiPlatformDxe when
PcdPciDisableBusEnumeration is TRUE -- that is, when the driver runs on
Xen (OvmfPkg and ArmVirtPkg both), or when the driver runs on QEMU as part
of ArmVirtPkg but no PCI host bridge was found by VirtFdtDxe. In these
cases the driver continues to install the ACPI tables immediately.
However, when PcdPciDisableBusEnumeration is FALSE (i.e., when the driver
runs on QEMU as part of OVMF, or as part of ArmVirtPkg and VirtFdtDxe
finds a PCI host bridge), we now delay the ACPI table download from QEMU.
We wait until the Platform BDS tells us that root bridges have been
connected, and PciIo instances are available.
The explanation is in the patch titled
OvmfPkg: introduce gRootBridgesConnectedEventGroupGuid
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The explanation is in the patch titled
OvmfPkg: introduce gRootBridgesConnectedEventGroupGuid
At this point, this signal doesn't do anything yet.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
QEMU's ACPI table generator can only create meaningful _CRS objects --
apertures -- for the root buses if all of the PCI devices behind those
buses are actively decoding their IO and MMIO resources, at the time of
the firmware fetching the "etc/table-loader" fw_cfg file. This is not a
QEMU error; QEMU follows the definition of BARs (which are meaningless
when decoding is disabled).
Currently we hook up AcpiPlatformDxe to the PCI Bus driver's
gEfiPciEnumerationCompleteProtocolGuid cue. Unfortunately, when the PCI
Bus driver installs this protocol, it's *still* not the right time for
fetching "etc/table-loader": although resources have been allocated and
BARs have been programmed with them, the PCI Bus driver has also cleared
IO and MMIO decoding in the command registers of the devices.
Furthermore, we couldn't reenable IO and MMIO decoding temporarily in our
gEfiPciEnumerationCompleteProtocolGuid callback even if we wanted to,
because at that time the PCI Bus driver has not produced PciIo instances
yet.
Our Platform BDSes are responsible for connecting the root bridges, hence
they know exactly when the PciIo instances become available -- not when
PCI enumeration completes (signaled by the above protocol), but when the
ConnectController() calls return.
This is when our Platform BDSes should explicitly cue in AcpiPlatformDxe.
Then AcpiPlatformDxe can temporarily enable IO and MMIO decoding for all
devices, while it contacts QEMU for the ACPI payload.
This patch introduces the event group GUID that we'll use for unleashing
AcpiPlatformDxe from our Platform BDSes.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
We'll need more room in the next patch. No functional changes.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
VS2008 seems to think that the "PciExBarBase" variable (introduced in
commit 7b8fe63561) can be evaluated for the
AddReservedMemoryBaseSizeHob() function call with its value being
uninitialized / indeterminate. This is not the case (see
"mHostBridgeDevId"); suppress the warning.
Reported-by: David Woodhouse <dwmw2@infradead.org>
Ref: http://thread.gmane.org/gmane.comp.bios.edk2.devel/8871/focus=9431
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: David Woodhouse <David.Woodhouse@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Current implementation only supports legacy region of 440 chip.
When QEMU is launched in Q35 mode using CSM enabled OVMF image,
LegacyBios driver fails to start due to the legacy region
[0xC0000, 0xFFFFF] cannot be written.
v2:
* just updates the comments.
v3:
* uses PcdOvmfHostBridgePciDevId as Jordan suggested.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Justen Jordan <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
By now OVMF makes MdeModulePkg/Bus/Pci/PciHostBridgeDxe go through
MMCONFIG (when running on Q35). Enable the driver to address each B/D/F's
config space up to and including offset 0xFFF.
Cc: Gabriel Somlo <somlo@cmu.edu>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Micha Zegan <webczat_200@poczta.onet.pl>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Tested-by: Micha Zegan <webczat_200@poczta.onet.pl>
If USE_OLD_PCI_HOST is FALSE, then we switch all executable module types
supported by DxePciLibI440FxQ35 to the following library instance stack:
BasePciSegmentLibPci [class: PciSegmentLib]
DxePciLibI440FxQ35 [class: PciLib]
BasePciCf8Lib [class: PciCf8Lib]
BasePciExpressLib [class: PciExpressLib]
Every module will select 0xCF8 vs. ECAM based on the OVMF platform type
(i440fx or Q35). Notably, MdeModulePkg/Bus/Pci/PciHostBridgeDxe is among
the affected drivers.
The BasePciExpressLib instance is where the PcdPciExpressBaseAddress PCD
fills its original role.
Cc: Gabriel Somlo <somlo@cmu.edu>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Micha Zegan <webczat_200@poczta.onet.pl>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Tested-by: Micha Zegan <webczat_200@poczta.onet.pl>
This library is a trivial unification of the following two PciLib
instances (and the result is easily diffable against each):
- MdePkg/Library/BasePciLibCf8
- MdePkg/Library/BasePciLibPciExpress
The PCI config access method is determined in the constructor function,
from the dynamic PCD "PcdOvmfHostBridgePciDevId" that is set by
PlatformPei.
The library instance is usable in DXE phase or later modules: the PciLib
instances being unified have no firmware phase / client module type
restrictions, and here the only PCD access is made in the constructor
function. That is, even before a given client executable's entry point is
invoked.
The library instance depends on PlatformPei both for setting the PCD
mentioned above, and also for enabling MMCONFIG on Q35. PEI and earlier
phase modules are not expected to need extended config access even on Q35.
Cc: Gabriel Somlo <somlo@cmu.edu>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Micha Zegan <webczat_200@poczta.onet.pl>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Tested-by: Micha Zegan <webczat_200@poczta.onet.pl>
The comments in the code should speak for themselves; here we note only
two facts:
- The PCI config space writes (to the PCIEXBAR register) are performed
using the 0xCF8 / 0xCFC IO ports, by virtue of PciLib being resolved to
BasePciLibCf8. (This library resolution will permanently remain in place
for the PEI phase.)
- Since PCIEXBAR counts as a chipset register, it is the responsibility of
the firmware to reprogram it at S3 resume. Therefore
PciExBarInitialization() is called regardless of the boot path. (Marcel
recently posted patches for SeaBIOS that implement this.)
This patch suffices to enable PCIEXBAR (and the dependent ACPI table
generation in QEMU), for the sake of "PCIeHotplug" in the Linux guest:
ACPI: MCFG 0x000000007E17F000 00003C
(v01 BOCHS BXPCMCFG 00000001 BXPC 00000001)
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff]
(base 0x80000000)
PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820
acpi PNP0A08:00: _OSC: OS supports
[ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls
[PCIeHotplug PME AER PCIeCapability]
In the following patches, we'll equip the core PCI host bridge / root
bridge driver and the rest of DXE as well to utilize ECAM on Q35.
Cc: Gabriel Somlo <somlo@cmu.edu>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Micha Zegan <webczat_200@poczta.onet.pl>
Ref: https://github.com/tianocore/edk2/issues/32
Ref: http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/10548
Suggested-by: Marcel Apfelbaum <marcel@redhat.com>
Reported-by: Micha Zegan <webczat_200@poczta.onet.pl>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Tested-by: Micha Zegan <webczat_200@poczta.onet.pl>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Gerd has advised us that long term support Q35 machine types have no low
RAM above 2GB, hence we should utilize the [2GB, 3GB) gap -- that we
currently leave unused -- for MMIO. (Plus, later in this series, for the
PCIEXBAR too.)
Cc: Gabriel Somlo <somlo@cmu.edu>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Micha Zegan <webczat_200@poczta.onet.pl>
Ref: https://github.com/tianocore/edk2/issues/32
Ref: http://thread.gmane.org/gmane.comp.bios.edk2.devel/8707/focus=8817
Suggested-by: Gerd Hoffmann <kraxel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Tested-by: Micha Zegan <webczat_200@poczta.onet.pl>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Section 5.1.16 ("PCIEXBAR -- PCI Express Register Range Base Address") in
Intel document #316966-002 (already referenced near the top of this header
file) describes the Q35 DRAM Controller register that configures the
memory-mapped PCI config space (also known as MMCONFIG, and ECAM /
Enhanced Configuration Access Method).
In this patch we add the macros we'll need later. We'll only support the
256 MB memory-mapped config space -- enough for buses [0, 255].
Cc: Gabriel Somlo <somlo@cmu.edu>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Micha Zegan <webczat_200@poczta.onet.pl>
Ref: https://github.com/tianocore/edk2/issues/32
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Tested-by: Micha Zegan <webczat_200@poczta.onet.pl>
Enable the network2 commands when NETWORK_IP6_ENABLE is TRUE, so we
would have Ping6 and Ifconfig6.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Ching-Pang Lin <glin@suse.com>
[lersek@redhat.com: added the word "Shell" to the subject]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The BaseTools/Scripts/ConvertMasmToNasm.py script was used to convert
X64/IoFifo.asm to X64/IoFifo.nasm
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The BaseTools/Scripts/ConvertMasmToNasm.py script was used to convert
Ia32/IoFifo.asm to Ia32/IoFifo.nasm
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The old driver is retained for now; it remains available with "-D
USE_OLD_PCI_HOST". This is because I'd like to involve end users and
downstreams in testing the new drier, but also allow them to switch back
to the old driver at the first sight of trouble, while we debug the new
driver in parallel.
In a few weeks the ifdeffery and the "OvmfPkg/PciHostBridgeDxe/" driver
should be removed.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
In the next patch we'll build "MdeModulePkg/Bus/Pci/PciHostBridgeDxe".
That driver depends on the PciSegmentLib class. Edk2 offers four
instances:
(1) MdePkg/Library/UefiPciSegmentLibPciRootBridgeIo/
Inappropriate here because it consumes
EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL, but
"MdeModulePkg/Bus/Pci/PciHostBridgeDxe" needs the library class for
producing that protocol.
(2) MdePkg/Library/PeiPciSegmentLibPciCfg2/
Restricted to PEIM, SEC, and PEI_CORE client modules.
(3) MdePkg/Library/DxePciSegmentLibEsal/
"uses ESAL services to perform PCI Configuration cycles"
(4) MdePkg/Library/BasePciSegmentLibPci/
A simple BASE library instance that sits on top of PciLib. This is our
choice. We can resolve PciSegmentLib to this instance for all module
types.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
We copy the code from InitRootBridge()
[OvmfPkg/PciHostBridgeDxe/PciHostBridge.c], with a slight change: the
device path is allocated separately now.
This is the final field to initialize in PCI_ROOT_BRIDGE.
The type EFI_PCI_ROOT_BRIDGE_DEVICE_PATH is renamed to
OVMF_PCI_ROOT_BRIDGE_DEVICE_PATH. The original is a misnomer (it is not a
standard UEFI type) that dates back to PcAtChipsetPkg/PciHostBridgeDxe.
Simply removing the EFI_ suffix would result in
PCI_ROOT_BRIDGE_DEVICE_PATH, where PCI_ could incorrectly suggest a
relation with the PCI standards or the PCI-related generic edk2 code.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
In "OvmfPkg/PciHostBridgeDxe/PciRootBridgeIo.c", the
RootBridgeIoCheckParameter() function hard-codes the maximum offset for
the PCI config space as 0xFF (see the MAX_PCI_REG_ADDRESS macro), which
matches OVMF's 0xCF8 / 0xCFC config access method.
The "MdeModulePkg/Bus/Pci/PciHostBridgeDxe" driver abstracts away config
space access via the PciSegmentLib class, so it has to be informed
separately about the config space size.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The bus aperture is copied verbatim from InitRootBridge()
[OvmfPkg/PciHostBridgeDxe/PciHostBridge.c].
The IO and 32-bit MMIO apertures are matched to PlatformPei's settings.
PciHostBridgeLibDxe expects PciHostBridgeLib instances to advertize the
exact apertures.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
InitRootBridge() in "OvmfPkg/PciHostBridgeDxe/PciHostBridge.c" passes the
EFI_PCI_HOST_BRIDGE_COMBINE_MEM_PMEM allocation attribute to
RootBridgeConstructor(); we should do the same here.
From "MdePkg/Include/Protocol/PciHostBridgeResourceAllocation.h":
/// If this bit is set, then the PCI Root Bridge does not support separate
/// windows for Non-prefetchable and Prefetchable memory. A PCI bus driver
/// needs to include requests for Prefetchable memory in the
/// Non-prefetchable memory pool.
Which implies that both the 32-bit and 64-bit prefetchable MMIO apertures
should be marked empty. (The CreateRootBridge() function actually enforces
this in "MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciRootBridgeIo.c".)
Furthermore, since OvmfPkg/PciHostBridgeDxe does *not* set the
EFI_PCI_HOST_BRIDGE_MEM64_DECODE allocation attribute:
/// If this bit is set, then the PCI Root Bridge supports 64 bit memory
/// windows. If this bit is not set, the PCI bus driver needs to include
/// requests for 64 bit memory address in the corresponding 32 bit memory
/// pool.
we follow suit in the PciHostBridgeLib instance.
In turn, the 64-bit MMIO apertures (both prefetchable and
non-prefetchable) should be marked empty.
MdeModulePkg/Bus/Pci/PciHostBridgeDxe enforces this too.
(64-bit MMIO aperture support, based on yet more fw_cfg files, is a
planned future improvement.)
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
When this BOOLEAN member is FALSE, and the caller tries to set up a DMA
transfer between a PCI device and a host buffer not entirely under 4GB,
then "MdeModulePkg/Bus/Pci/PciHostBridgeDxe" sets up a bounce buffer under
4GB, in the implementation of EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.Map().
Since that's exactly what RootBridgeIoMap() does in
"OvmfPkg/PciHostBridgeDxe/PciRootBridgeIo.c", stick with it in this
conversion.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
These settings are copied from the RootBridgeConstructor() function, file
"OvmfPkg/PciHostBridgeDxe/PciRootBridgeIo.c".
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This is the first of the patches that set the fields of PCI_ROOT_BRIDGE.
The structure is zero-filled as a precaution for later field additions.
Here we set the Segment member explicitly to zero (so that any later
customization can be easier).
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This function has no counterpart in OvmfPkg/PciHostBridgeDxe/, but the
PciHostBridgeLib class requires it.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
In this patch we import the scan for extra root buses from the
InitializePciHostBridge() function, in file
"OvmfPkg/PciHostBridgeDxe/PciHostBridge.c".
For the time being, the InitRootBridge() and UninitRootBridge() functions
are just placeholders.
The PciHostBridgeGetRootBridges() API expects us to return the
PCI_ROOT_BRIDGE structures in a contiguous array, instead of a linked
list. Therefore the following bits have to be converted manually:
(1) The array is allocated in advance, in a single step.
(2) The calculation of the array size depends on an explicit
multiplication, which we must check against overflow. Since more than
255 extra root bridges make no sense anyway, we use (1 + 255) as the
limit on the main plus all extra root bridges. This also ensures that
the UINTN multiplication doesn't overflow.
(3) The PciHostBridgeDxe code decrements "ExtraRootBridgesLeft" to
terminate the scanning early. Here we need track the increasing count
of used array elements as well, so we employ "ExtraRootBridges" as a
constant limit, and increment the new local variable "Initialized".
(4) The prototypes of InitRootBridge() and UninitRootBridge() reflect that
the PCI_ROOT_BRIDGE structure is allocated by the caller; only
in-place initialization is necessary.
Additionally, macros are employed for standard PCI quantities, from
"MdePkg/Include/IndustryStandard/Pci22.h":
- MAX_PCI_DEVICE_NUMBER (31) is replaced with PCI_MAX_DEVICE (same),
- the constant 255 is replaced with PCI_MAX_BUS,
- the (RootBridgeNumber < 256) condition is replaced with
(RootBridgeNumber <= PCI_MAX_BUS).
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
In this patch we clone "MdeModulePkg/Library/PciHostBridgeLibNull" for
customization under OvmfPkg. Differences relative to a verbatim copy:
- the Null suffix is dropped from file names,
- the UNI file is dropped, together with the corresponding MODULE_UNI_FILE
reference in the INF file,
- the INF file receives a new FILE_GUID,
- the top comments in the files mention OVMF, not a null instance.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Going forward, two modules will need to know about the aperture:
PlatformPei (as before), and OVMF's upcoming PciHostBridgeLib instance
(because the core PciHostBridgeDxe driver requires the library to state
the exact apertures for all root bridges).
On QEMU, all root bridges share the same MMIO aperture, hence one pair of
PCDs suffices.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
At the moment we don't intend to customize this aperture at runtime, but
going forward, two modules will need to know about it: PlatformPei (as
before), and OVMF's upcoming PciHostBridgeLib instance (because the core
PciHostBridgeDxe driver requires the library to state the exact apertures
for all root bridges).
On QEMU, all root bridges share the same IO port aperture, hence one pair
of PCDs suffices.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
At the location of this header an earlier [PcdsFixedAtBuild] section is in
effect already.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Because SecureBootConfigDxe use FileExplorerLib now, but
FileExplorerLib is not in the dsc file of the package
that use SecureBootConfigDxe. Now add it to pass build.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This adds the new Virtio-RNG DXE module to all three builds of
OvmfPkg. Note that QEMU needs to be invoked with the 'device
virtio-rng-pci' option in order for this device to be exposed to
the guest.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This implements a UEFI driver model driver for Virtio devices of type
VIRTIO_SUBSYSTEM_ENTROPY_SOURCE, and exposes them via instances of
the EFI_RNG_PROTOCOL protocol, supporting the EFI_RNG_ALGORITHM_RAW
algorithm only.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
VirtioLib provides an API for simple, synchronous (request/response-style)
virtio communication. The guest driver builds one descriptor chain, link
for link, with VirtioPrepare() and VirtioAppendDesc(), then submits the
chain, and awaits the processing, with VirtioFlush().
The descriptor chain is always built at the beginning of the descriptor
area, with the head descriptor having descriptor index 0.
In order to submit the descriptor chain to the host, the guest always
pushes a new "available element" to the Available Ring, in genuine
queue-like fashion, with the new element referencing the head descriptor
(which always has index 0, see above).
In turn, after processing, the host always pushes a new "used element" to
the Used Ring, in genuine queue-like fashion, with the new element
referencing the head descriptor of the chain that was just processed. The
same element also reports the number of bytes that the host wrote,
consecutively across the host-writeable buffers that were linked by the
descriptors.
(See "OvmfPkg/VirtioNetDxe/TechNotes.txt" for a diagram about the
descriptor area and the rings.)
Because at most one descriptor chain can be in flight with VirtioLib at
any time,
- the Available Ring and the Used Ring proceed in lock-step,
- and the head descriptor that the new "available" and "used" elements can
ever reference has index 0.
Based on the above, we can modify VirtioFlush() to return the number of
bytes written by the host across the descriptor chain. The virtio-block
and virtio-scsi drivers don't care (they have other ways to parse the data
produced by the host), while the virtio-net driver doesn't use
VirtioFlush() at all (it employs VirtioLib only to set up its rings).
However, the virtio entropy device, to be covered in the upcoming
patches, reports the amount of randomness produced by the host only
through this quantity.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Before the merger of the authenticated and non-authenticated variable
drivers (commit fa0737a839), we had to match the varstore header GUID in
"OvmfPkg/VarStore.fdf.inc" to SECURE_BOOT_ENABLE, because the opposite
GUID would cause either driver to fail an assertion. The header structures
for individual variables residing in the varstore were different
(VARIABLE_HEADER vs. AUTHENTICATED_VARIABLE_HEADER), and each driver could
only handle its own, so this GUID enforcement was necessary.
Since the unification of the variable driver however, it treats (a)
variable store format, and (b) AuthVariableLib instance as independent
characteristics; it can always manipulate variable stores with both header
types. All variations boot now; the difference is whether authenticated
variables, and special variables computed from them (like SecureBoot) are
supported at runtime:
variable store non-auth auth and SB
header GUID AuthVariableLib variables variables
-- --------------------- ------------------- -> --------- -----------
1 Variable SecurityPkg/... supported unsupported
2 Variable AuthVariableLibNull supported unsupported
3 AuthenticatedVariable SecurityPkg/... supported supported
4 AuthenticatedVariable AuthVariableLibNull supported unsupported
At the moment, SECURE_BOOT_ENABLE selects between cases #2 (FALSE) and #3
(TRUE). That is, it controls both the varstore header GUID in
"OvmfPkg/VarStore.fdf.inc", and the AuthVariableLib resolution in the DSC
files.
Exploiting the unified driver's flexibility, we can simplify
"OvmfPkg/VarStore.fdf.inc" by picking the AuthenticatedVariable GUID as a
constant, and letting SECURE_BOOT_ENABLE control only the AuthVariableLib
resolution. This amounts to SECURE_BOOT_ENABLE choosing between cases #3
(TRUE) and #4 (FALSE), with identical results as before.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Ref: http://thread.gmane.org/gmane.comp.bios.edk2.devel/7319/focus=7344
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
QEMU emulates NVMe. NvmExpressDxe seems to work well with it. The relevant
QEMU options are
-drive id=drive0,if=none,format=FORMAT,file=PATHNAME \
-device nvme,drive=drive0,serial=SERIAL
where the required SERIAL value sets the Serial Number (SN) field of the
"Identify Controller Data Structure". It is an ASCII string with up to 20
characters, which QEMU pads with spaces to maximum length.
(Refer to "NVME_ADMIN_CONTROLLER_DATA.Sn" in
"MdeModulePkg/Bus/Pci/NvmExpressDxe/NvmExpressHci.h".)
Cc: Vladislav Vovchenko <vladislav.vovchenko@sk.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Reference: https://github.com/tianocore/edk2/issues/48
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Vladislav Vovchenko <vladislav.vovchenko@sk.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19791 6f19259b-4bc3-4df7-8a09-765794883524
Change the image verification policy for option ROM images to 0x00
(ALWAYS_EXECUTE).
While this may not be a good idea for physical platforms (see e.g.
<https://trmm.net/Thunderstrike>), on the QEMU platform the benefits seem
to outweigh the drawbacks:
- For QEMU's virtual PCI devices, and for some assigned PCI devices, the
option ROMs come from host-side files, which can never be rewritten from
within the guest. Since the host admin has full control over a guest
anyway, executing option ROMs that originate from host-side files
presents no additional threat to the guest.
- For assigned physical PCI devices with option ROMs, the argument is not
so clear-cut. In theory a setup could exist where:
- the host-side UEFI firmware (with DENY_EXECUTE_ON_SECURITY_VIOLATION)
rejects the option ROM of a malicious physical PCI device, but
- when the device is assigned to the guest, OVMF executes the option ROM
in the guest,
- the option ROM breaks out of the guest (using an assumed QEMU
vulnerability) and gains QEMU user privileges on the host.
However, in order to escalate as far as it would happen on the bare
metal with ALWAYS_EXECUTE (i.e., in order to gain firmware-level access
on the host), the malicious option ROM would have to break through (1)
QEMU, (2) traditional UID and GID based privilege separation on the
host, (3) sVirt (SELinux) on the host, (4) the host OS - host firmware
boundary. This is not impossible, but not likely enough to discourage
the use cases below.
- This patch makes it possible to use unsigned iPXE network drivers that
QEMU presents in the option ROMs of virtual NICs and assigned SR-IOV
VFs, even if Secure Boot is in User Mode or Deployed Mode.
- The change also makes it possible to execute unsigned, outdated
(revoked), or downright malicious option ROMs of assigned physical
devices in guests, for corporate, entertainment, academia, or security
research purposes.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19614 6f19259b-4bc3-4df7-8a09-765794883524
Secure Boot support was originally addded to OvmfPkg on 2012-Mar-09, in
SVN r13093 (git 8cee3de7e9), titled
OvmfPkg: Enable secure-boot support when SECURE_BOOT_ENABLE==TRUE
At that time the image verification policies in
SecurityPkg/SecurityPkg.dec were:
- option ROM image: 0x00 (ALWAYS_EXECUTE)
- removable media image: 0x05 (QUERY_USER_ON_SECURITY_VIOLATION)
- fixed media image: 0x05 (QUERY_USER_ON_SECURITY_VIOLATION)
The author of SVN r13093 apparently didn't want to depend on the
SecurityPkg defaults for the latter two image origins, plus the
ALWAYS_EXECUTE policy for option ROM images must have been deemed too lax.
For this reason SVN r13093 immediately spelled out 0x05
(QUERY_USER_ON_SECURITY_VIOLATION) within OvmfPkg for all three image
origins.
Fast forward to 2013-Aug-28: policy 0x05
(QUERY_USER_ON_SECURITY_VIOLATION) had been forbidden in the UEFI spec,
and SVN r14607 (git db44ea6c4e) reflected this in the source code:
- The policies for the latter two image origins were switched from 0x05 to
0x04 (DENY_EXECUTE_ON_SECURITY_VIOLATION) in SecurityPkg,
- the patch changed the default policy for option ROM images too, from
0x00 (ALWAYS_EXECUTE) to 0x04 (DENY_EXECUTE_ON_SECURITY_VIOLATION),
- any other client DSC files, including OvmfPkg's, underwent a whole-sale
0x05 (QUERY_USER_ON_SECURITY_VIOLATION) -> 0x04
(DENY_EXECUTE_ON_SECURITY_VIOLATION) replacement too.
The practical result of that patch for OvmfPkg was that the explicit 0x04
settings would equal the strict SecurityPkg defaults exactly.
And that's what we have today: the "override the default values from
SecurityPkg" comments in OvmfPkg's DSC files are stale, in practice.
It is extremely unlikely that SecurityPkg would change the defaults from
0x04 (DENY_EXECUTE_ON_SECURITY_VIOLATION) any time in the future, so let's
just inherit those in OvmfPkg.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19613 6f19259b-4bc3-4df7-8a09-765794883524
GCC_ASM_EXPORT() not only exports a symbol as a function, it also emits
a .type <xxx>, %function directive, which is used by the ARM linker to
decide whether to emit interworking branches. So replace the explicit
.global with GCC_ASM_EXPORT(), or the code will not be callable from
Thumb-2 code.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19329 6f19259b-4bc3-4df7-8a09-765794883524
warning C4459: declaration of 'xs' hides global declaration.
Update code to rename local variable xs to xsp to be different.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Acked-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19116 6f19259b-4bc3-4df7-8a09-765794883524
At the moment, the "UefiCpuPkg/Universal/Acpi/S3Resume2Pei" module doesn't
support S3 resume if the platform has SMM enabled and the PEI phase is
built for X64. We document this in the README, but it is not conspicuous
enough.
Replace the "fine print" in the README with a runtime check in
PlatformPei.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19070 6f19259b-4bc3-4df7-8a09-765794883524
When -D SMM_REQUIRE is given, replace both
- OvmfPkg/QemuFlashFvbServicesRuntimeDxe/FvbServicesRuntimeDxe.inf and
- OvmfPkg/EmuVariableFvbRuntimeDxe/Fvb.inf
with
- OvmfPkg/QemuFlashFvbServicesRuntimeDxe/FvbServicesSmm.inf.
The outermost (= runtime DXE driver) VariableSmmRuntimeDxe enters SMM, and
the rest:
- the privileged half of the variable driver, VariableSmm,
- the fault tolerant write driver, FaultTolerantWriteSmm,
- and the FVB driver, FvbServicesSmm,
work in SMM purely.
We also resolve the BaseCryptLib class for DXE_SMM_DRIVER modules, for the
authenticated VariableSmm driver's sake.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19065 6f19259b-4bc3-4df7-8a09-765794883524
The following modules constitute the variable driver stack:
- QemuFlashFvbServicesRuntimeDxe and EmuVariableFvbRuntimeDxe, runtime
alternatives for providing the Firmware Volume Block(2) Protocol,
dependent on qemu pflash presence,
- FaultTolerantWriteDxe, providing the Fault Tolerant Write Protocol,
- MdeModulePkg/Universal/Variable/RuntimeDxe, independently of
-D SECURE_BOOT_ENABLE, providing the Variable and Variable Write
Architectural Protocols.
Let's move these drivers closer to each other in the DSC and FDF files, so
that we can switch the variable driver stack to SMM with more local
changes.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19064 6f19259b-4bc3-4df7-8a09-765794883524
When the user requires "security" by passing -D SMM_REQUIRE, and
consequently by setting PcdSmmSmramRequire, enforce flash-based variables.
Furthermore, add two ASSERT()s to catch if the wrong module were pulled
into the build.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19063 6f19259b-4bc3-4df7-8a09-765794883524
At this point we can enable building PiSmmCpuDxeSmm.
CPU specific features, like SMRR detection, and functions that are used to
initialize SMM and process SMIs, are abstracted through the
SmmCpuFeaturesLib class for the PiSmmCpuDxeSmm module. Resolve it to our
own implementation under OvmfPkg -- it allows PiSmmCpuDxeSmm to work with
QEMU's and KVM's 64-bit state save map format, which follows the
definition from AMD's programmer manual.
SmmCpuPlatformHookLib provides platform specific functions that are used
to initialize SMM and process SMIs. Resolve it to the one Null instance
provided by UefiCpuPkg, which is expected to work for most platforms.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
[pbonzini@redhat.com: resolve the SmmCpuFeaturesLib class to OVMF's own
instance]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19061 6f19259b-4bc3-4df7-8a09-765794883524
The PiSmmCpuDxeSmm driver from UefiCpuPkg depends on the ACPI_CPU_DATA
structure -- created by a platform- and CPU-specific driver -- in order to
support ACPI S3. The address of this structure is communicated through the
dynamic PCD PcdCpuS3DataAddress.
The "UefiCpuPkg/Include/AcpiCpuData.h" header file documents the fields of
this structure in detail.
The simple/generic "UefiCpuPkg/CpuS3DataDxe" driver creates and populates
the structure in a conformant way, and it co-operates well with
PiSmmCpuDxeSmm, for OVMF's purposes.
PlatformBdsLib CpuS3DataDxe PiSmmCpuDxeSmm S3Resume2Pei
(DXE_DRIVER) (DXE_DRIVER) (DXE_SMM_DRIVER) (PEIM)
-------------- --------------- ---------------- --------------
normal collects data
boot except MTRR
settings into
ACPI_CPU_DATA
sets
PcdCpuS3Da...
signals
End-of-Dxe
|
+----------> collects MTRR
settings into
ACPI_CPU_DATA
installs
[Dxe]Smm
ReadyToLock
|
+---------------------------> fetches
PcdCpuS3Dat...
copies
ACPI_CPU_DATA
into SMRAM
runtime
S3
suspend
S3 transfers
resume control to
PiSmmCpuDxe...
|
uses <----+
ACPI_CPU_DATA
from SMRAM
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19060 6f19259b-4bc3-4df7-8a09-765794883524
This patch complements the previous one, "OvmfPkg: use relaxed AP SMM
synchronization mode". While that patch focuses on the case when the SMI
is raised synchronously by the BSP, on the BSP:
BSPHandler() [UefiCpuPkg/PiSmmCpuDxeSmm/MpService.c]
SmmWaitForApArrival() [UefiCpuPkg/PiSmmCpuDxeSmm/MpService.c]
IsSyncTimerTimeout() [UefiCpuPkg/PiSmmCpuDxeSmm/SyncTimer.c]
this patch concerns itself with the case when it is one of the APs that
raises (and sees delivered) the synchronous SMI:
APHandler() [UefiCpuPkg/PiSmmCpuDxeSmm/MpService.c]
IsSyncTimerTimeout() [UefiCpuPkg/PiSmmCpuDxeSmm/SyncTimer.c]
Namely, in APHandler() the AP waits for the BSP to enter SMM regardless of
PcdCpuSmmSyncMode, for PcdCpuSmmApSyncTimeout microseconds (the default
value is 1 second). If the BSP doesn't show up in SMM within that
interval, then the AP brings it in with a directed SMI, and waits for the
BSP again for PcdCpuSmmApSyncTimeout microseconds.
Although during boot services, SmmControl2DxeTrigger() is only called by
the BSP, at runtime the OS can invoke runtime services from an AP (it can
even be forced with "taskset -c 1 efibootmgr"). Because on QEMU
SmmControl2DxeTrigger() only raises the SMI for the calling processor (BSP
and AP alike), the first interval above times out invariably in such cases
-- the BSP never shows up before the AP calls it in.
In order to mitigate the performance penalty, decrease
PcdCpuSmmApSyncTimeout to one tenth of its default value: 100 ms. (For
comparison, Vlv2TbltDevicePkg sets 1 ms.)
NOTE: once QEMU becomes capable of synchronous broadcast SMIs, this patch
and the previous one ("OvmfPkg: use relaxed AP SMM synchronization mode")
should be reverted, and SmmControl2DxeTrigger() should be adjusted
instead.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19059 6f19259b-4bc3-4df7-8a09-765794883524
Port 0xb2 on QEMU only sends an SMI to the currently executing processor.
The SMI handler, however, and in particular SmmWaitForApArrival, currently
expects that SmmControl2DxeTrigger triggers an SMI IPI on all processors
rather than just the BSP. Thus all SMM invocations loop for a second (the
default value of PcdCpuSmmApSyncTimeout) before SmmWaitForApArrival sends
another SMI IPI to the APs.
With the default SmmCpuFeaturesLib, 32-bit machines must broadcast SMIs
because 32-bit machines must reset the MTRRs on each entry to system
management modes (they have no SMRRs). However, our virtual platform
does not have problems with cacheability of SMRAM, so we can use "directed"
SMIs instead. To do this, just set gUefiCpuPkgTokenSpaceGuid.PcdCpuSmmSyncMode
to 1 (aka SmmCpuSyncModeRelaxedAp). This fixes SMM on multiprocessor virtual
machines.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19058 6f19259b-4bc3-4df7-8a09-765794883524
This adjusts the previously introduced state save map access functions, to
account for QEMU and KVM's 64-bit state save map following the AMD spec
rather than the Intel one.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[lersek@redhat.com: reflow commit message, convert patch to CRLF]
Cc: Paolo Bonzini <pbonzini@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19057 6f19259b-4bc3-4df7-8a09-765794883524
This implementation copies SMRAM state save map access from the
PiSmmCpuDxeSmm module.
The most notable change is:
- dropping support for EFI_SMM_SAVE_STATE_REGISTER_IO
- changing the implementation of EFI_SMM_SAVE_STATE_REGISTER_LMA to use
the SMM revision id instead of a local variable (which
UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.c initializes from CPUID's LM
bit). This accounts for QEMU's implementation of x86_64, which always
uses revision 0x20064 even if the LM bit is zero.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[lersek@redhat.com: reflow commit message & fix typo, convert patch to
CRLF]
Cc: Paolo Bonzini <pbonzini@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19056 6f19259b-4bc3-4df7-8a09-765794883524
SMRR, MTRR, and SMM Feature Control support is not needed on a virtual
platform.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
[lersek@redhat.com: insert space between ASSERT and (), convert to CRLF,
refresh against SVN r18958]
Cc: Paolo Bonzini <pbonzini@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19055 6f19259b-4bc3-4df7-8a09-765794883524
The next patches will customize the implementation, but let's start from
the common version to better show the changes.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[lersek@redhat.com: drop UNI file, keep whitespace intact, generate new
FILE_GUID, split off DSC changes, reflow commit message, refresh against
SVN r18958]
Cc: Paolo Bonzini <pbonzini@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19054 6f19259b-4bc3-4df7-8a09-765794883524
Explanation from Michael Kinney:
This PCD allows a platform to provide PlatformSmmBspElection() in a
platform specific SmmCpuPlatformHookLib instance to decide which CPU
gets elected to be the BSP in each SMI.
The SmmCpuPlatformHookLibNull [instance] always returns EFI_NOT_READY
for that function, which makes the module behave the same as the PCD
being set to FALSE.
The default is TRUE, so the platform lib is always called, so a platform
developer can implement the hook function and does not have to also
change a PCD setting for the hook function to be active.
A platform that wants to eliminate the call to the hook function
[altogether] can set the PCD to FALSE.
So for OVMF, I think it makes sense to set this PCD to FALSE in the DSC
file.
Suggested-by: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19053 6f19259b-4bc3-4df7-8a09-765794883524
Although neither LocalApicLib instance is suitable for runtime DXE drivers
(because they access the APIC at the physical address retrieved from
either MSR_IA32_APIC_BASE_ADDRESS or PcdCpuLocalApicBaseAddress), they are
suitable for SMM drivers -- SMM drivers are not influenced by the runtime
OS's virtual address map.
PiSmmCpuDxeSmm links against LocalApicLib. 64-bit Linux guests tend to
enable x2apic mode even in simple VCPU configurations (e.g., 4 sockets, 1
core/socket, 1 thread/core):
[ 0.028173] x2apic enabled
If PiSmmCpuDxeSmm was linked with the BaseXApicLib instance (i.e., with no
x2apic support), then the next runtime service call that is backed by an
SMM driver triggers the following ASSERT in BaseXApicLib (because the
latter notices that x2apic has been enabled, which it doesn't support):
ASSERT .../UefiCpuPkg/Library/BaseXApicLib/BaseXApicLib.c(263):
ApicBaseMsr.Bits.Extd == 0
It is reasonable to give all LocalApicLib client modules in OVMF the same
level of x2apic support, hence resolve LocalApicLib globally to
BaseXApicX2ApicLib. This will not be conditional on -D SMM_REQUIRE,
because BaseXApicX2ApicLib is compatible with BaseXApicLib in any
environment where the latter can be used.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19052 6f19259b-4bc3-4df7-8a09-765794883524
Ruiyu Ni
Laszlo Ersek
Volker Rümelin
Ard Biesheuvel
Jordan Justen
Star Zeng
Alcantara, Paulo
James Bottomley
Gary Lin
Dandan Bi
Liming Gao
Paolo Bonzini
Michael Kinney