Update the method to get PCD information and support empty section.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hess Chen <hesheng.chen@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Instead of parsing all content of DEC file, just get the package
path only to save time.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hess Chen <hesheng.chen@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
The relocatable build of ArmVirtQemuKernel is designed to be executed
from RAM, and contains some scratch memory at the start of the image
to use as a stack very early on, and to preserve the DTB image received
from QEMU while it discovers and initializes memory.
It turns out that 8 KB is a bit on the small side here, especially when
executing with secure world emulation enabled, in which case there are
additional nodes present.
So increase the slack space to 32 KB.
While at it, remove a stale Xen reference that was copy/pasted when this
file was created.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
In some cases, (e.g., when running QEMU with TrustZone emulation), the
DT may contain DT nodes whose status is set to 'secure'. Similarly, the
status may be set to 'disabled' if the consumer of the DT image is
expected to treat it as if it weren't there.
So check whether a 'status' property is present, and if so, ignore the
node if the status is not 'okay'.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
In some cases, (e.g., when running QEMU with TrustZone emulation), the
DT may contain DT nodes whose status is set to 'secure'. Similarly, the
status may be set to 'disabled' if the consumer of the DT image is
expected to treat it as if it weren't there.
So check whether a 'status' property is present, and if so, ignore the
node if the status is not 'okay'.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
In some cases, (e.g., when running QEMU with TrustZone emulation), the
DT may contain memory nodes whose status is set to 'secure'. Similarly,
the status may be set to 'disabled' if the consumer of the DT image is
expected to treat it as if it weren't there.
So check whether a 'status' property is present, and if so, ignore the
node if the status is not 'okay'.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Add check logic and error message for some keywords validity.
show target address in URL format and MAC address correctly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
All the Shell 2.2 features are implemented except DMEM/MM
changes which are pending on spec change.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Kinney D Michael <kinney.d.michael@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
SmmProfile feature required to protect all SMM ranges by structure
mProtectionMemRangeTemplate. This update is to add additonal save SMM ranges
into mProtectionMemRangeTemplate besides the range specified by
mCpuHotPlugData.SmrrBase/mCpuHotPlugData.SmrrSiz.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Internal function IsInSmmRanges() is added t check SMM range by saved SMM ranges
beside by mCpuHotPlugData.SmrrBase/mCpuHotPlugData.SmrrSiz.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Shell 2.2 spec defines =0x/=0X, =H/=h, =S, =L and =P for
hex number, hex array, ascii string, unicode string and
device path data.
The patch adds such support.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
To give platforms some room to decide which DTB is suitable and where
to load it from, load the DTB image indirectly via the new
DtPlatformDtbLoaderLib library class.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Introduce an implementation of the new DtPlatformDtbLoaderLib library
class that simply retrieves the first raw section of an FV file named
'gDtPlatformDefaultDtbFileGuid'.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
To abstract the way a platform reasons about which DTB is appropriate,
and the way it ultimately supplies the DTB image, introduce a new library
class to encapsulate this functionality.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Add the new DtPlatformDxe driver to EmbeddedPkg's .dsc file so that
we can build it outside the context of a platform.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
In general, we should not present two separate (and inevitably different)
hardware descriptions to the OS, in the form of ACPI tables and a device
tree blob. For this reason, we recently added the logic to ArmVirtQemu to
only expose the ACPI 2.0 entry point if no DT binary is being passed, and
vice versa.
However, this is arguably a regression for those who relied on DT
descriptions being available, even if the former behavior can be
restored by passing the -no-acpi switch to QEMU.
So allow a secret handshake with the UEFI Shell, to set a variable that
will result in ACPI to be disabled on subsequent boots even if -no-acpi
was not passed on the QEMU command line.
setvar -nv -bs -guid 50bea1e5-a2c5-46e9-9b3a-59596516b00a ForceNoAcpi =01
To delete the variable and revert to the old situation, simply omit the
value after the =
setvar -nv -bs -guid 50bea1e5-a2c5-46e9-9b3a-59596516b00a ForceNoAcpi =
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Recent changes to the PlatformBootManagerLib implementation in ArmPkg
require its users to define a resolution for BootLogoLib. So add this
missing resolution to Beagle.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
ArmCpuLib is not used, and will be removed. So drop the reference from
our .DSC
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
ArmCpuLib is never used anywhere, and is about to be removed. So remove
any references from our .DSC files.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
As a security measure, some distro toolchains now default to PIC code
generation, allowing executables (as opposed to shared libraries) using
the objects to be built as PIE binaries, which can be loaded at a random
virtual offset.
However, our ELF to PE/COFF generation code does not deal with the
resulting relocation types (i.e., GOT based), and so the use of PIC code
leads to GenFw errors.
Given that
a) our non-PIC PE/COFF executables are already relocatable,
b) PIC code leads to all symbol references to be indirected via GOT
entries containing absolute addresses, each requiring an entry in the
relocation table,
c) the AArch64 ISA makes it perfectly feasible to built PIE executables
from non-PIC code,
there is absolutely no upside to using PIC code for building EDK2 modules,
and so we're better off simply disabling it unconditionally.
Note that when running under the OS, the GOT has an additional advantage,
i.e., that all .text/.rodata pages remain clean and so can be shared between
processes. This does not apply to the UEFI environment, however.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
The new algorithm finds out the more optimal MTRR solution for
current memory type settings.
Compare against the original algorithm, the new one guarantees
to find the correct MTRR solution, but doesn't guarantee to
find the most optimal MTRR solution.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
V2:
- Update correct patch info
V1:
- Add x mode for Brotli and BrotliCompress
- Change Brotli and BrotliCompress format from DOS to UNIX
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Bell Song <binx.song@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Issue reported at bugzillar 445.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
ACPI tables may contain multiple fields which point to the same
destination table. For example, in some revisions, the FADT contains
both DSDT and X_DSDT fields, and they may both point to the DSDT.
Previously, if Qemu created QEMU_LOADER_ADD_POINTER linker commands for
such instances, the linking process would attempt to install the same
pointed-to table repeatedly. For tables of which there must only be one
instance, the call to AcpiProtocol->InstallAcpiTable() would fail during
the second linker command pointing to the same table, thus entirely
aborting the ACPI table linking process. In the case of tables of which
there may be multiple instances, the table would end up duplicated.
This change adds a memoisation data structure which tracks the table
pointers that have already been processed; even if the same pointer is
encountered multiple times, it is only processed once.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
[lersek@redhat.com: DSDT<->XSDT typo, debug msg, and coding style fixups]
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=368
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
The memory free operation is empty function in PEI. The compiler
optimization will bring the build warning in openssl/crypto/mem.c:
warning C4718: 'CRYPTO_free': recursive call has no side
effects, deleting
This patch uses '/wd4718' to silence the build warning for PEI
module building.
Cc: Ting Ye <ting.ye@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qin Long <qin.long@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
For current iSCSI protocol parsing, UINT16 truncation may be happened. Since
the Spec already have declaimed that 0 is TCP Protocol and 1+ is reserved, the
parsing can be refined as below:
if (StrCmp (ProtocolStr, L"TCP") == 0) {
ISCSIDevPath->NetworkProtocol = 0;
} else {
//
// Undefined and reserved.
//
ISCSIDevPath->NetworkProtocol = 1;
}
Cc: Warner Losh <imp@bsdimp.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
According UEFI Spec, set to zero StationIp means to let the underlying
IPv6 driver choose a source address. But currently, DNSv6 always return
EFI_NO_MAPPING. The issue is caused by below bugs in DnsDxe:
* Incorrect TPL(TPL_CALLBACK) usage during UDP configuration.
* Failed to create the timer used to get IPv6 mapping
* Doesn't check the Ip6Mode.IsStarted flag.
Cc: Zhang Lubo <lubo.zhang@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Zhang Lubo <lubo.zhang@intel.com>
The EFI_IMAGE_MACHINE_TYPE_SUPPORTED() macro is abused in the PeiCore
code to decide whether the system we are compiling for can deal with
executable code being copied elsewhere and executed from there.
As stated in the comment, this is fundamentally a property of the compiler
target, and so this should be made dependent on MDE_CPU_xxx preprocessor
defines, and not on whether or not the runtime target can deal with
PE/COFF images of a certain machine type.
On X86/IA32, this mostly boils down to the same thing, but not on other
architectures, so let's clean this up.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Pkcs7Sign, Rsa2048Sha256Sign and Rsa2048Sha256GenerateKeys doesn't work
on Linux. It needs to be changed with shell=True.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This patch update the wrapper implementation in TlsLib to align
with the latest OpenSSL-1.1.0xx API changes.
Cc: Ting Ye <ting.ye@intel.com>
Cc: Palmer Thomas <thomas.palmer@hpe.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gary Lin <glin@suse.com>
Cc: Ronald Cron <ronald.cron@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qin Long <qin.long@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ting Ye <ting.ye@intel.com>
OpenSSL-1.1.xx makes most data structures opaque.
This patch updates Public Key Cipher Wrapper implementations in
BaseCryptLib to use the accessor APIs for opaque object access.
The impacted interfaces includes RSA, DH, X509, PKCS7, etc.
Cc: Ting Ye <ting.ye@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gary Lin <glin@suse.com>
Cc: Ronald Cron <ronald.cron@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qin Long <qin.long@intel.com>
Reviewed-by: Ting Ye <ting.ye@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Gary Lin <glin@suse.com>
OpenSSL-1.1.xx makes most data structures opaque.
This patch updated HMAC Wrapper implementation with opaque
HMAC_CTX object.
The HmacXXGetContextSize() is marked as deprecated, and updated
to use the fixed HMAC_CTX size, which is just kept for compatibility.
New APIs (HmacXXNew(), HmacXXFree()) were added as the recommended
HMAC_CTX usage interfaces for HMAC-XXXX operations.
Cc: Ting Ye <ting.ye@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gary Lin <glin@suse.com>
Cc: Ronald Cron <ronald.cron@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qin Long <qin.long@intel.com>
Reviewed-by: Ting Ye <ting.ye@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Hess Chen
Ard Biesheuvel
Zhang, Lubo
Jiaxin Wu
Yonghong Zhu
Ruiyu Ni
Jeff Fan
Chen A Chen
Song, BinX
Jiewen Yao
Phil Dennis-Jordan
Qin Long