This ensures the .type directive is used to mark them as function symbols
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <Olivier.Martin@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17904 6f19259b-4bc3-4df7-8a09-765794883524
FvSimpleFileSystem adds '.efi' to the EFI application and drivers
filenames even through this extension is not present in the real
filename of the EFI module.
In the current behaviour, it would not be possible to open an EFI
application using FvSimpleFileSystem if the extension has been omitted
in the given filename.
It can be create some confusion if someone wants to try to
open a file with the real application name (eg: 'Shell').
This patch adds support to try again to look for the file with the
extension if it had failed to find it without the extension.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <Olivier.Martin@arm.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17903 6f19259b-4bc3-4df7-8a09-765794883524
PeiCore hang when loads a PEIM whose section alignment requirement is 0x40
but the actual base address is 0x20 aligned.
The issue is caused by the following facts, in order:
1. GCC49 requires the section alignment of .data to be 0x40. So a new link
script gcc4.9-ld-script was added for GCC49 to specify the 0x40
alignment.
2. GenFw tool was enhanced to sync ELF's section alignment to PE header.
Before the enhancement, the section alignment of converted PE image
always equals to 0x20.
If only with #1 change, GCC49 build image won't hang in PeiCore because
the converted PE image still claims 0x20 section alignment which is
aligned to the align setting set in FDF file. But later with #2 change,
the converted PE image starts to claims 0x40 section alignment, while
build tool still puts the PEIM in 0x20 aligned address, resulting the
PeCoffLoaderLoadImage() reports IMAGE_ERROR_INVALID_SECTION_ALIGNMENT
error.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17902 6f19259b-4bc3-4df7-8a09-765794883524
This patch add the HTTP boot related drivers to NT32 platform.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17900 6f19259b-4bc3-4df7-8a09-765794883524
Enable selecting the TtyTerminal type for the ARM BDS build of QEMU using
the TTY_TERMINAL define.
Convert INTEL_BDS define to check for value (!if) rather than just definition
(!ifdef) to allow setting of either value on command line.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Roy Franz <roy.franz@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17899 6f19259b-4bc3-4df7-8a09-765794883524
Add a fixed pointer PCD to allow build-time selection of VT100 or TTY terminal
type. The default remains VT100 emulation.
Add support for building the ARM QEMU platforms with the TTY terminal
with the "-D TTY_TERMINAL" build option.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
[Roy Franz: minor edits: add TtyTerminal GUID, rename LINUX_TERMINAL to TTY_TERMINAL]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Roy Franz <roy.franz@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17898 6f19259b-4bc3-4df7-8a09-765794883524
Accept the VT220 escape code [3~ as backspace for TtyTerm terminals. This is
sent by many Linux terminals by default. Also accept VT220 function keys
F1-F12, and VT100 F1-F4 keys as these are commonly sent by Linux terminals.
The VT220 escape codes are longer, and variable length so a new state is added
to the state machine along with a variable to construct the multibyte escape
sequence.
There are currently no ambiguous escape sequence prefixes accepted, so the TTY
terminal accepts escape sequences for a variety of terminals. The goal is to
'just work' with as many terminals as possible, rather than properly emulating
any specific terminal. Backspace, Del, and F10 have been tested on xterm,
rxvt, tmux, and screen.
Note: The existing vt100 function key handling does not match the vt100
documentation that I found, so I added the TTY terminal handling
of VT100 F1-F4 (really PF1-PF4 on vt100) separately. The vt100
has no F5-F10 keys, so I don't know what the current vt100 code
is based on.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Roy Franz <roy.franz@linaro.org>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17897 6f19259b-4bc3-4df7-8a09-765794883524
Treat ASCII 0x7F as backspace, rather than delete, for TTY terminals. This
better matches the default Linux terminal settings that are used when connecting
to a simulated platform using xterm or a similar terminal program.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Roy Franz <roy.franz@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17896 6f19259b-4bc3-4df7-8a09-765794883524
This patch a adds new terminal type, TtyTerm, to TerminalDxe. This terminal
type provides a place to add support for various *nix terminals that don't
behave like standard VT terminals. The goal is to 'just work' with as many
terminals as possible, rather than properly emulating any one specific
terminal.
Signed-off-by: Roy Franz <roy.franz@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17895 6f19259b-4bc3-4df7-8a09-765794883524
Safe string functions may ASSERT when the source length is larger than the MaxDest. This patch use Strn**S to indicate the copy length.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Tapan Shah <<tapandshah@hp.com>>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17894 6f19259b-4bc3-4df7-8a09-765794883524
Recent changes to debug timer initialization (commit 2befbc82, svn 17572)
modified the Sec/Pei InitializeDebugAgent() routine to enable debug timer
interrupts. This causes problems in the DEBUG_AGENT_INIT_POSTMEM_SEC case:
the callers appear to assume that if they block timer interrupts before the
call, interrupts will remain blocked afterwards.
It is not always safe to have interrupts enabled on return from
InitializeDebugAgent(). For instance, after calling InitializeDebugAgent(),
OvmfPkg's TemporaryRamMigration() moves the stack, heap, and IDT to RAM, then
switches to the new stack. Only then does it reenable timer interrupts.
Taking an interrupt during this process can corrupt state, causing crashes.
Do not unmask the debug timer interrupt in the DEBUG_AGENT_INIT_POSTMEM_SEC
case.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Brian J. Johnson <bjohnson@sgi.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17893 6f19259b-4bc3-4df7-8a09-765794883524
This reverts commit SVN rev17862.
The former commit was breaking the build when DTB_DIR is defined.
It has been the patch would be reverted for the time being.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <Olivier.Martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17889 6f19259b-4bc3-4df7-8a09-765794883524
that are assigned but never used afterwards.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: jiaxinwu <jiaxin.wu@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17888 6f19259b-4bc3-4df7-8a09-765794883524
UEFI spec has clear description below:
Configuration Table Groups
The GUID for a configuration table also defines a corresponding event group GUID with the same value.
If the data represented by a configuration table is changed,
InstallConfigurationTable() should be called.
When InstallConfigurationTable() is called, the corresponding event is signaled.
When this event is signaled,
any components that cache information from the configuration table can optionally update their cached state.
For example, EFI_ACPI_TABLE_GUID defines a configuration table for ACPI data.
When ACPI data is changed, InstallConfigurationTable() is called.
During the execution of InstallConfigurationTable(),
a corresponding event group with EFI_ACPI_TABLE_GUID is signaled,
allowing an application to invalidate any cached ACPI data.
But current implementation only InstallConfigurationTable() at first time ACPI data change.
if (((Version & EFI_ACPI_TABLE_VERSION_1_0B) != 0) &&
!AcpiTableInstance->TablesInstalled1) {
Status = gBS->InstallConfigurationTable (&gEfiAcpi10TableGuid, AcpiTableInstance->Rsdp1);
if (EFI_ERROR (Status)) {
return EFI_ABORTED;
}
AcpiTableInstance->TablesInstalled1 = TRUE;
}
if (((Version & ACPI_TABLE_VERSION_GTE_2_0) != 0) &&
!AcpiTableInstance->TablesInstalled3) {
Status = gBS->InstallConfigurationTable (&gEfiAcpiTableGuid, AcpiTableInstance->Rsdp3);
if (EFI_ERROR (Status)) {
return EFI_ABORTED;
}
AcpiTableInstance->TablesInstalled3= TRUE;
}
The AcpiTableInstance->TablesInstalled1 and AcpiTableInstance->TablesInstalled3 conditional judgment need to be removed.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17885 6f19259b-4bc3-4df7-8a09-765794883524
The bash binary can be in various locations depending on the system: on Linux
it's in /bin while on BSD it's normally in /usr/local/bin. However, the
env binary is almost always in /usr/bin and so can be used to find and start
the shell.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Bruce Cran <bruce@cran.org.uk>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17883 6f19259b-4bc3-4df7-8a09-765794883524
Add exception type decoder to print exception name string beside print
exception type value. The exception names are from IA32 SDM.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17877 6f19259b-4bc3-4df7-8a09-765794883524
Add a BOM check for UNI file and fix some help message error
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hess Chen <hesheng.chen@intel.com>
Reviewed-by: YangX Li <yangx.li@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17876 6f19259b-4bc3-4df7-8a09-765794883524
Safe string functions may ASSERT when the source length is larger than the MaxDest. This patch use Strn**S to indicate the copy length.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17867 6f19259b-4bc3-4df7-8a09-765794883524
On FreeBSD, uuid.h is in /usr/include, not /usr/include/uuid.
Fix some errors when building using clang caused by self-assignment: the
preferred way to 'use' a variable is '(void)x;', not 'x = x;'.
Where the system provides $(CC) etc. by default, don't override it to be gcc.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Bruce Cran <bruce@cran.org.uk>
Reviewed-by: Yingke Liu <yingke.d.liu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17866 6f19259b-4bc3-4df7-8a09-765794883524
The linker script is specific to GCC toolchain.
So, this script will not work with other linkers
(eg: ARM Toolchain Linker, Microsoft Linker, etc).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <Olivier.Martin@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17865 6f19259b-4bc3-4df7-8a09-765794883524
The linker script is specific to GCC toolchain.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <Olivier.Martin@arm.com>
Reviewed-by: Ronald Cron <Ronald.Cron@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17864 6f19259b-4bc3-4df7-8a09-765794883524
On the FVP base and foundation models, the default file name
used to retrieve the FDT depended on the values assigned to
model parameters (GIC related model parameters).
Now, in addition to the fallback "fdt.dtb" file name (used for legacy
reason), only one default file name is used :
- "fvp-base.dtb" for the base model.
- "fvp-foundation.dtb" for the foundation model.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <Olivier.Martin@arm.com>
Reviewed-by: Ronald Cron <Ronald.Cron@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17862 6f19259b-4bc3-4df7-8a09-765794883524
This fixes the declaration and definition of mSystemMemoryEnd so that it
is correctly annotated as a non-function symbol. Also adds the ASM_PFX
prefix, which is empty on AARCH64 but should be included for correctness.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17861 6f19259b-4bc3-4df7-8a09-765794883524
This fixes the declaration and definition of mSystemMemoryEnd so that it
is correctly annotated as a non-function symbol. Also adds the ASM_PFX
prefix, which is empty on AARCH64 but should be included for correctness.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17860 6f19259b-4bc3-4df7-8a09-765794883524
The call in ProbeMediaStatus() to the ReadDisk() function of the
EFI_DISK_IO_PROTOCOL interface implemented in DiskIoDxe/DiskIo.c
crashed in DiskIo2ReadWriteDisk() because of the NULL value of
the destination buffer pointer.
Pass the address of a buffer in the stack instead of a NULL
pointer.
In addition to avoiding the crash, that way, the media probe does not
depend anymore on the way the EFI_DISK_IO_PROTOCOL implementation deals
with a NULL value of the destination buffer pointer as the UEFI
specification does not specify the expected behaviour.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <Ronald.Cron@arm.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17859 6f19259b-4bc3-4df7-8a09-765794883524
This patch add the header file and DXE implementation for the HttpLib.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17856 6f19259b-4bc3-4df7-8a09-765794883524
and also add new UI configuration support in Ip4Dxe driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: jiaxinwu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17853 6f19259b-4bc3-4df7-8a09-765794883524
Olivier Martin
Ruiyu Ni
Feng Tian
Fu Siyuan
Roy Franz
Laszlo Ersek
Qiu Shumin
Brian J. Johnson
jiaxinwu
Zhang Lubo
Star Zeng
Bruce Cran
Jeff Fan
Hess Chen
Ard Biesheuvel
Ronald Cron
Ye Ting
Dandan Bi