With "PcdCpuSmmEnableBspElection" set to FALSE, PiSmmCpuDxeSmm always
considers the processor with index 0 to be the SMM Monarch (a.k.a. the SMM
BSP). The SMM Monarch handles the SMI for real, while the other CPUs wait
in their SMM loops.
In a subsequent patch, we want to set "PcdCpuHotPlugSupport" to TRUE. For
that, PiCpuSmmEntry() [UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.c] forces
us with an ASSERT() to set "PcdCpuSmmEnableBspElection" to TRUE as well.
To satisfy that expectation, we can simply remove our current
"PcdCpuSmmEnableBspElection|FALSE" setting, and inherit the default TRUE
value from "UefiCpuPkg.dec".
This causes "mSmmMpSyncData->BspIndex" in PiSmmCpuDxeSmm to lose its
static zero value (standing for CPU#0); instead it becomes (-1) in
general, and the SMM Monarch is elected anew on every SMI.
The default SMM Monarch Election is basically a race -- whichever CPU can
flip "mSmmMpSyncData->BspIndex" from (-1) to its own index, becomes king,
for handling that SMI. Refer to SmiRendezvous()
[UefiCpuPkg/PiSmmCpuDxeSmm/MpService.c].
I consider this non-determinism less than ideal on QEMU/KVM; it would be
nice to stick with a "mostly permanent" SMM Monarch even with the Election
enabled. We can do that by implementing the PlatformSmmBspElection() API
in the SmmCpuPlatformHookLibQemu instance:
The IA32 APIC Base MSR can be read on each CPU concurrently, and it will
report the BSP bit as set only on the current Boot Service Processor. QEMU
marks CPU#0 as the BSP, by default.
Elect the current BSP, as reported by QEMU, for the SMM Monarch role.
(Note that the QEMU commit history is not entirely consistent on whether
QEMU/KVM may mark a CPU with nonzero index as the BSP:
- At tag v4.2.0, "target/i386/cpu.c" has a comment saying "We hard-wire
the BSP to the first CPU". This comment goes back to commit 6cb2996cef5e
("x86: Extend validity of bsp_to_cpu", 2010-03-04).
- Compare commit 9cb11fd7539b ("target-i386: clear bsp bit when
designating bsp", 2015-04-02) though, especially considering KVM.
Either way, this OvmfPkg patch is *not* dependent on CPU index 0; it just
takes the race on every SMI out of the game.)
One benefit of using a "mostly permanent" SMM Monarch / BSP is that we can
continue testing the SMM CPU synchronization by deterministically entering
the firmware on the BSP, vs. on an AP, from Linux guests:
$ time taskset -c 0 efibootmgr
$ time taskset -c 1 efibootmgr
(See
<https://github.com/tianocore/tianocore.github.io/wiki/Testing-SMM-with-QEMU,-KVM-and-libvirt#uefi-variable-access-test>.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1512#c5
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200226221156.29589-5-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Clone the Null instance of SmmCpuPlatformHookLib from UefiCpuPkg to
OvmfPkg. In this patch, customize the lib instance only with the following
no-op steps:
- Replace Null/NULL references in filenames and comments with Qemu/QEMU
references.
- Update copyright notices.
- Clean up and rewrap comment blocks.
- Update INF_VERSION to the latest INF spec version (1.29).
- Update FILE_GUID.
- Drop the UNI file.
This patch is best reviewed with:
$ git show --find-copies=43 --find-copies-harder
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1512
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200226221156.29589-4-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
The "ACPI_CPU_DATA.NumberOfCpus" field is specified as follows, in
"UefiCpuPkg/Include/AcpiCpuData.h" (rewrapped for this commit message):
//
// The number of CPUs. If a platform does not support hot plug CPUs,
// then this is the number of CPUs detected when the platform is booted,
// regardless of being enabled or disabled. If a platform does support
// hot plug CPUs, then this is the maximum number of CPUs that the
// platform supports.
//
The InitializeCpuBeforeRebase() and InitializeCpuAfterRebase() functions
in "UefiCpuPkg/PiSmmCpuDxeSmm/CpuS3.c" try to restore CPU configuration on
the S3 Resume path for *all* CPUs accounted for in
"ACPI_CPU_DATA.NumberOfCpus". This is wrong, as with CPU hotplug, not all
of the possible CPUs may be present at the time of S3 Suspend / Resume.
The symptom is an infinite wait.
Instead, the "mNumberOfCpus" variable should be used, which is properly
maintained through the EFI_SMM_CPU_SERVICE_PROTOCOL implementation (see
SmmAddProcessor(), SmmRemoveProcessor(), SmmCpuUpdate() in
"UefiCpuPkg/PiSmmCpuDxeSmm/CpuService.c").
When CPU hotplug is disabled, "mNumberOfCpus" is constant, and equals
"ACPI_CPU_DATA.NumberOfCpus" at all times.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Ray Ni <ray.ni@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1512
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200226221156.29589-3-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
[lersek@redhat.com: shut up UINTN->UINT32 warning from Windows VS2019 PR]
In the CoreStartImage() function [MdeModulePkg/Core/Dxe/Image/Image.c], if
the image entry point returns a failure code, then the DXE Core logs a
helpful DEBUG_ERROR message, with the following format string:
"Error: Image at %11p start failed: %r\n"
Do similarly in the SMM Core (update the message slightly).
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Ray Ni <ray.ni@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1512
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200226221156.29589-2-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Complement commit 6cf1880fb5 ("OvmfPkg: add customized Tcg2ConfigPei
clone", 2018-03-09) by detecting TPM 1.2 devices.
Since Tpm12RequestUseTpm() returns success on any TPM interface,
(including FIFO & CRB which are TPM 2.0), try to send a GetTicks TPM
1.2 command to probe the version. In case of failure, fallback on TPM
2.0 path.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-Id: <20200226152433.1295789-3-marcandre.lureau@redhat.com>
Tested-by: Simon Hardy <simon.hardy@itdev.co.uk>
A following patch is going to use the same configuration for TPM1.2
and TPM2.0, and it's simpler to support both than variable
configurations.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200226152433.1295789-2-marcandre.lureau@redhat.com>
Tested-by: Simon Hardy <simon.hardy@itdev.co.uk>
Before taking any actions, check if an instance of the LoadFile2 exists
already on the Linux initrd media GUID device path, and whether it was
provided by this command. If so, abort, since no duplicate instances of
the device path should exist.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2564
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This is the UEFI counterpart to my Linux series which generalizes
mixed mode support into a feature that requires very little internal
knowledge about the architecture specifics of booting Linux on the
part of the bootloader or firmware.
Instead, we add a .compat PE/COFF header containing an array of
PE_COMPAT nodes containing <machine type, entrypoint> tuples that
describe alternate entrypoints into the image for different native
machine types, e.g., IA-32 in a 64-bit image so it can be booted
from IA-32 firmware.
This patch implements the PE/COFF emulator protocol to take this new
section into account, so that such images can simply be loaded via
LoadImage/StartImage, e.g., straight from the shell.
This feature is based on the EDK2 specific PE/COFF emulator protocol
that was introduced in commit 57df17fe26 ("MdeModulePkg/DxeCore:
invoke the emulator protocol for foreign images", 2019-04-14).
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2564
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
EDK2's implementation of the LoadImage() boot service permits non-native
binaries to be loaded (i.e., X64 images on IA32 firmware), but any
attempts to start such an image using StartImage() will return
EFI_UNSUPPORTED.
The integration of the PE/COFF emulator protocol into the DXE core
deviates slightly from this paradigm, given that its IsImageSupported
hook as well as its RegisterImage hook are invoked from LoadImage,
and by the time StartImage is called, no opportunity is given to the
provider of the PE/COFF emulator protocol to prevent an image from
being started if it only supports loading it.
To address this disparity, let's move the invocation of RegisterImage()
to the implementation of the StartImage() boot service, allowing the
emulator to permit LoadImage() but reject StartImage() on images that
turn out not to meet the requirements of the emulator as it is being
started.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2564
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Liming Gao <liming.gao@intel.com>
Add the 'initrd' dynamic shell command to the build so we can load
Linux initrds straight from the shell using the new generic protocol,
which does not rely on initrd= being passed on the command line.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2564
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Add the 'initrd' dynamic shell command to the build so we can load
Linux initrds straight from the shell using the new generic protocol,
which does not rely on initrd= being passed on the command line.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2564
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Add a new 'initrd' command to the UEFI Shell that allows any file that is
accessible to the shell to be registered as the initrd that is returned
when Linux's EFI stub loader invokes the LoadFile2 protocol on its special
vendor media device path.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2564
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Add LINUX_EFI_INITRD_MEDIA_GUID to our collection of GUID definitions,
it can be used in a media device path to specify a Linux style initrd
that can be loaded by the OS using the LoadFile2 protocol.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2564
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Now that all the TPM2 related plumbing is in place, we can add the
final piece that performs the measurements of loaded images into
the appropriate PCRs.
This patch ports commit d5a002aba0 ("OvmfPkg: plug
DxeTpm2MeasureBootLib into SecurityStubDxe", 2018-03-09) to ArmVirtQemu.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2560
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Enable the DXE phase component that publishes the HII pages and
associated logic to enable TPM2 parameters to be configured by
the user via the setup menu.
This patch ports (parts of) the following commits to ArmVirtQemu:
- 3103389043 ("OvmfPkg: Add TCG2 Configuration menu to the Device
Manager menu", 2019-02-11)
- cf3ad972a2 ("OvmfPkg: reorganize TPM2 support in DSC/FDF files",
2020-01-09)
- f55477fe2d ("OvmfPkg: use HII type PCDs for TPM2 config related
variables", 2020-01-09)
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2560
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Enable the TPM2 support module in the DXE phase, and the associated
libraries and PCDs that it requires. This will be wired into the
measured boot support code in a subsequent patch.
Note that Tcg2Dxe.inf is added to ArmVirtQemuFvMain.fdf.inc, which
is shared with other platforms in ArmVirtPkg, but as those will not
set the TPM2_ENABLE define, this change does not affect them.
This patch ports (parts of) the following OvmfPkg commits to
ArmVirtQemu:
- 0c0a50d6b3 ("OvmfPkg: include Tcg2Dxe module", 2018-03-09)
- b9777bb42e ("OvmfPkg: add Tcg2PhysicalPresenceLibQemu", 2018-05-22)
-- only to match OVMF's current lib class resolutions
- 1ec05b81e5 ("OvmfPkg: use DxeTpmMeasurementLib if and only if
TPM2_ENABLE", 2019-07-04)
- b9130c866d ("OvmfPkg: link Sha384 and Sha512 support into Tcg2Pei
and Tcg2Dxe", 2018-08-16)
- 5d3ef15da7 ("OvmfPkg: link SM3 support into Tcg2Pei and Tcg2Dxe",
2019-07-19)
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2560
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
In preparation of conditializing the choice of resolution based on
TPM2_ENABLE for ArmVirtQemu, move the TpmMeasurementLib out of the
shared .DSC include and into the individual DSCs.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2560
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
DxeTpmMeasurementLib should only be used on platforms that implement
measured boot, which we will do in a future patch, but only for
ArmVirtQemu, as the remaining ones are fundamentally incompatible,
given that they do not implement a PEI phase.
So use TpmMeasurementLibNull as the default resolution for all
ArmVirtPkg platforms, regardless of how they are built.
This mirrors commit 1ec05b81e5 ("OvmfPkg: use DxeTpmMeasurementLib
if and only if TPM2_ENABLE", 2019-07-04).
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2560
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Incorporate the PEI components and the associated library class
resolutions and PCD declarations to enable TPM2 support in the
PEI phase.
This patch ports (parts of) the following OvmfPkg commits to
ArmVirtQemu:
- 6cf1880fb5 ("OvmfPkg: add customized Tcg2ConfigPei clone",
2018-03-09)
- 4672a48928 ("OvmfPkg: include Tcg2Pei module", 2018-03-09)
- b9130c866d ("OvmfPkg: link Sha384 and Sha512 support into Tcg2Pei
and Tcg2Dxe", 2018-08-16)
- 5d3ef15da7 ("OvmfPkg: link SM3 support into Tcg2Pei and Tcg2Dxe",
2019-07-19)
gEfiSecurityPkgTokenSpaceGuid.PcdTpm2HashMask defaults to 0x0 so
that the TPM init code adopts the currently active PCR banks as
the ones that are enabled by default.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2560
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
As a first step in gradually adding TPM2 support to ArmVirtQemu, add
the TPM2_ENABLE configurable to the [Defines] section, and if it is
set, add the ResetSystem PEIM to the build, along with the library
class references that we will need to support it:
- wire ArmVirtPsciResetSystemPeiLib into the ResetSystem PEIM itself,
which will be in charge of performing the actual reset
- add PeiResetSystemLib as the common ResetSystemLib resolution for
PEIM class modules, so that other PEIMs will invoke the PPI
published by the ResetSystem PEIM.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2560
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Implement a ArmVirtPkg specific version of the PSCI ResetSystemLib that
is usable in the PEI phase, as the existing one relies on the FDT client
protocol, making it unsuitable.
Note that accessing the device tree passed by QEMU via its initial base
address is guaranteed to be safe at any time during the PEI phase, so we
can defer discovery of the PSCI method until the time the reset library
is actually invoked (which is rarely)
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2560
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Introduce a boolean PCD that tells us whether TPM support is enabled
in the build, and if it is, record the TPM base address in the existing
routine that traverses the device tree in the platform PEIM.
If a TPM is found, install the gOvmfTpmDiscoveredPpiGuid signalling PPI
that will unlock the dispatch of OvmfPkg's Tcg2ConfigPei. If TPM2
support is enabled in the build but no TPM2 device is found, install the
gPeiTpmInitializationDonePpiGuid PPI, which is normally installed by
Tcg2ConfigPei if no TPM2 is found, but in our case Tcg2ConfigPei will
never run so let's do it here instead.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2560
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
We currently include PcdLib.h in PlatformPeiLib, without declaring
this dependency in its .INF description. Since all the PCDs we use
resolve to fixed type in practice, this does not really matter at
the moment, but since we will be adding dynamic PCD references in
a subsequent patch, let's make the PcdLib dependency explicit, so
that its dispatch is guaranteed to be ordered correctly with respect
to the provider of the dynamic PCD PPI.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2560
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
On ARM systems, the TPM does not live at a fixed address, and so we
need the platform to discover it first. So introduce a PPI that signals
that the TPM address has been discovered and recorded in the appropriate
PCD, and make Tcg2ConfigPei depex on it when built for ARM or AARCH64.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2560
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2556
This patch uses CPUID signature check to skip reading the PlatformId MSR,
which is not implemented on AMD processors.
The PlatformId is used for loading microcode patches, which is also not
supported and AMD-based platforms. To mitigate the PlatformId dependency,
PcdCpuMicrocodePatchAddress and PcdCpuMicrodePatchRegionSize must be set
to 0 (default value), in order to bypass microcode loading code paths.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Leo Duran <leo.duran@amd.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2563
This patch is to fix a incremental build regression bug
which happen when using nmake. That's introduced by 818283de3f.
If there is white space before !INCLUDE instruction, nmake will not
process it. Source code's dependent header files are listed in
${deps_file} file, if it's not included successfully, nmake will
not detect the change of those header file.
This patch has been verified in Windows with VS2015 and Linux with GCC5.
The header file add/modify/delete can trig the incremental build with this fix.
There is no impact on the clean build.
Cc: Andrew Fish <afish@apple.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Tested-by: Liming Gao <liming.gao@intel.com>
In edk2 commit 333f32ec23, QemuVideoDxe gained support for QEMU's
"secondary-vga" device model (originally introduced in QEMU commit
63e3e24db2e9).
In QEMU commit 765c94290863, the "bochs-display" device was introduced,
which would work with QemuVideoDxe out of the box, reusing the
"secondary-vga" logic.
Support for both models has been broken since edk2 commit 662bd0da7f.
Said patch ended up requiring VGA IO Ports -- i.e., at least one of
EFI_PCI_IO_ATTRIBUTE_VGA_IO and EFI_PCI_IO_ATTRIBUTE_VGA_IO_16 -- even if
the device wasn't actually VGA compatible.
Restrict the IO Ports requirement to VGA compatible devices.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Marc W Chen <marc.w.chen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Fixes: 662bd0da7f
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2555
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200224171741.7494-1-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2031
This patch triggers the RecycleEvent for invalid ARP packets.
Prior to this, we would just ignore invalid ARP packets,
and never free them.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Maciej Rabeda <maciej.rabeda@linux.intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Signed-off-by: Nicholas Armour <nicholas.armour@intel.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2534
Extend validation of ACPI structure lengths which are read from the
ACPI table being parsed. Additionally check if the structure 'Length'
field value is positive. If not, stop parsing the faulting table.
Some ACPI tables define internal structures of variable size. The
'Length' field inside the substructure is used to update a pointer used
for table traversal. If the byte-length of the structure is equal to 0,
acpiview can enter an infinite loop. This condition can occur if, for
example, the zero-allocated ACPI table buffer is not fully populated.
This is typically a bug on the ACPI table writer side.
In short, this method helps acpiview recover gracefully from a
zero-valued ACPI structure length.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2511
This commit changes the PCD PcdHashApiLibPolicy to the type
PcdsFixedAtBuild so as to be able to optimize away the unused hashing
algorithms in HashApiLib instance used by a driver.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Amol N Sukerkar <amol.n.sukerkar@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2511
This commit aligns the baseHashApiLib with TPM 2.0 Implementation
as follows:
- Remove reference to MD4 and MD5 algorithms as they are deprecated
- Align the enumerations for hashing algoerithms with the one used
in TPM 2.0 implementation defined in IndustryStandard/Tpm20.h.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Amol N Sukerkar <amol.n.sukerkar@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1869
The UEFI spec requires that if any error occurs in
UninstallMultipleProtocolInterfaces(), EFI_INVALID_PARAMETER is returned
and not the return code of UninstallProtocolInterface().
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
IsCertHashFoundInDatabase() is actually used only for searching dbx,
according to the function logic, its comments and its use cases. Changing
it to IsCertHashFoundInDbx to avoid confusion.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1608
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1608
To avoid false-negative issue in check hash against dbx, both error
condition (as return value) and check result (as out parameter) of
IsSignatureFoundInDatabase() are added. So the caller of this function
will know exactly if a failure is caused by a black list hit or
other error happening, and enforce a more secure operation to prevent
secure boot from being bypassed. For a white list check (db), there's
no such necessity.
All intermediate results inside this function will be checked and
returned immediately upon any failure or error, like out-of-resource,
hash calculation error or certificate retrieval failure.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1608
If the second GetVariable() call for "dbx" fails, in IsForbiddenByDbx(),
we have to free Data. Jump to "Done" for that.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1608
All intermediate results inside this function will be checked and
returned immediately upon any failure or error, like out-of-resource,
hash calculation error or certificate retrieval failure.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1608
To avoid false-negative issue in check hash against dbx, both error
condition (as return value) and check result (as out parameter) of
IsCertHashFoundInDatabase() are added. So the caller of this function
will know exactly if a failure is caused by a black list hit or
other error happening, and enforce a more secure operation to prevent
secure boot from being bypassed. For a white list check (db), there's
no such necessity.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1608
The dbx fetching code inside the while/for-loop causes code hard to
understand. Since there's no need to get dbx more than once, this patch
simplify the code logic by moving related code to be outside the while-
loop. db fetching code is also refined accordingly to reduce the indent
level of code.
More comments are also added or refined to explain more details.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1608
In timestamp check after the cert is found in db, the original code jumps
to 'Done' if any error happens in fetching dbx variable. At any of the
jump, VerifyStatus equals to TRUE, which means allowed-by-db. This should
not be allowed except to EFI_NOT_FOUND case (meaning dbx doesn't exist),
because it could be used to bypass timestamp check.
This patch add code to change VerifyStatus to FALSE in the case of memory
allocation failure and dbx fetching failure to avoid potential bypass
issue.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1608
Normally two times of calling gRT->GetVariable() are needed to get
the data of a variable: get the variable size by passing zero variable
size, and then allocate enough memory and pass the correct variable size
and buffer.
But in the inner loop in IsAllowedByDb(), the DbxDataSize was not
initialized to zero before calling gRT->GetVariable(). It won't cause
problem if dbx does not exist. But it will give wrong result if dbx
exists and the DbxDataSize happens to be a small enough value. In this
situation, EFI_BUFFER_TOO_SMALL will be returned. Then the result check
code followed will jump to 'Done', which is not correct because it's
actually the value expected.
if (Status == EFI_BUFFER_TOO_SMALL) {
goto Done;
}
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
In case the signers' certificate stack, retrieved from the PE/COFF image's
Authenticode blob, has zero elements (=there are zero signer certificates),
then we should consider the image forbidden by DBX, not accepted by DBX.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1608
Pointer HashCtx used in IsCertHashFoundInDatabase() is not freed inside
the while-loop, if it will run more than once.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
v3: correct the coding style.
v2: correct the commit message & add BZ number.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1610
This patch is to check the received package length to make sure the package
has a valid length field.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Maciej Rabeda <maciej.rabeda@linux.intel.com>
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
Check if the ACPI table length, as reported in the ACPI table header, is
big enough to fit at least the header itself.
If not, report an error to the user and stop parsing the table in order
to prevent buffer overruns.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Remove duplicate Generic Address Structure (GAS) and ACPI table header
size definitions. Replace any dependencies with the definitions from
Acpi63.h.
AcpiParser.h redefines the size of Generic Address Structure (GAS) and
the ACPI table header. The motivation is to 'minimise any reference to
the EDK2 ACPI headers in an attempt to provide cross checking'. While
the redefined values are unlikely to change, redefinition causes
unnecessary maintenance overhead for acpiview.
In addition to this, EDK2 ACPI headers are referenced throughout the
entire project, so the assumption should be that the definitions in
these header files are correct.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Match data type and format specifier for printing.
1. Type cast ProcessorNumber and FeatureIndex to UINT32
as %d only expects a UINT32.
2. Use %08x instead of %08lx for CacheControl to print Index
as it is UINT32 type.
3. Use %016lx instead of %08lx for MemoryMapped to print
(Index | LShiftU64 (HighIndex, 32)) as it is UINT64 type.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Change Jiaxin Wu from Maintainer to Reviewer.
Cc: Maciej Rabeda <maciej.rabeda@linux.intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Maciej Rabeda <maciej.rabeda@linux.intel.com>
Laszlo Ersek
Marc-André Lureau
Ard Biesheuvel
Leo Duran
Bob Feng
Siyuan Fu
Krzysztof Koch
Amol N Sukerkar
Heinrich Schuchardt
Jian J Wang
Jiaxin Wu
Zeng, Star