BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=1325
if SingleFile.Path = "/foo/bar.Sap/yada/source.S" and
SingleFile.Ext = ".S". Then key would end up "/foo/bar"
instead of "/foo/bar.Sap/yada/source" as intended.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
GenFdsCommand returned dictionary with elements that
are not compatible with GenFdsApi.
As a result the following options were not processed by GenFdsApi:
-v, -q, -d, --genfds-multi-thread, --ignore-sources
The issue is introduced by commit b3497bad12.
V2: Remove EFI_SOURCE references
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Felix Polyudov <felixp@ami.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Update _FixedPcdVoidTypeDict to FixedVoidTypePcds
'_FixedPcdVoidTypeDict' no longer exists because edk2 version (b23414f6).
'ModuleAutoGen' object has no attribute '_FixedPcdVoidTypeDict'.
Build fail when PCD use in the [DEPEX] section of INF files
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1466
DEC file defines PCD default value and PCD supported type.
DSC can configure PCD type and value.
If the value is same to default value in DEC file,
DSC can only configure PCD type and leave empty for value.
This usage supports all type PCD except for DynamicHii type.
So, DynamicHii PCD should support this usage. Below is one example in DSC.
for example,
[PcdsDynamicHii.common.DEFAULT]
PcdPkgTokenSpaceGuid.PcdCName|L"VarName"|gVarGuid|0x00||NV,BS
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
XCODE5 reports warning "equality comparison with extraneous parentheses".
Remove extraneous parentheses around the comparison to silence this warning.
This issue is caused by commit 8daa4278e8.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Feng Bob C <bob.c.feng@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Warning message is that "equality comparison with extraneous parentheses"
Remove extraneous parentheses around the comparison to silence this warning.
This issue is caused by commit 8daa4278e8.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Feng Bob C <bob.c.feng@intel.com>
Reviewed-by: Feng Bob C <bob.c.feng@intel.com>
GCC for 32-bit ARM chokes on .aslc files when running with LTO
enabled. Since LTO has no benefit whatsoever here, just disable
it globally for GCC5 and up when building .aslc files.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1449
This patch enable build tools to recognize that
when two given files have the same GUID, file path and ARCH in Dsc,
The later one's definition will be used.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Carsey Jaben <jaben.carsey@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Build tool do not support SET syntax in DSC.
If the SET statement is used in DSC, build tool just ignore it.
That behavior confused some users that
they think SET statement works in DSC like in FDF.
To avoid such confusion, build tool report ERROR
if there is "SET" statement in Dsc file.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Cc: Liming Gao <liming.gao@intel.com>
1 - Some of these imports are cascaded from another file. Import them locally.
2 - Some of these imports are not used. Remove them.
3 - Some of these were missing the namespace used to import them.
These changes facilitate optimization of BaseTools:
https://bugzilla.tianocore.org/show_bug.cgi?id=42
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1415
When an integer constant specified in the .vfr file is
too large for the varstore field it is being used with,
the VFR compiler reports an overflow warning like this:
Test.vfr(693): WARNING: Overflow: Value 1024 is too large to
store in a UINT8
: String to UINT* Overflow
Since Warning does not break the build process,
and it is easy to miss it.
This patch is to update the code to report error and break
the build if meet this kind of issue.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
No GCC44 definitions or remarks exist at this point, so remove the GCC44
documentation too, from "tools_def.template".
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1377
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
"tools_def.template" currently suggests, in the documentation of the
LzmaF86Compress utility, that said tool is generally unhelpful on binaries
built with the GCC44 toolchain, relative to LzmaCompress.
This statement doesn't apply to the GCC48 toolchain. I compressed 126
NOOPT_GCC48/IA32 unique EFI modules (built with gcc-4.8.5, as part of
OVMF) with both LzmaCompress and LzmaF86Compress. I repeated the same for
117 NOOPT_GCC48/X64 unique EFI modules. On average, the LzmaF86Compress
output size was 92.4% of the LzmaCompress output size in the IA32 case
(best relative compression: 86.01%, poorest relative compression: 97.47%
-- still a win). In the X64 case, the LzmaF86Compress output size was
92.95% of the LzmaCompress output size, on avarege (best relative
compression: 87.69%, poorest relative compression: 97.65% -- again, still
a win).
Given the consistent improvement from LzmaCompress to LzmaF86Compress,
remove the statement (rather than updating it to GCC48).
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1377
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
GCC44_IA32_X64_DLINK_COMMON is only referenced by:
- GCC48_IA32_X64_ASLDLINK_FLAGS,
- GCC48_IA32_X64_DLINK_FLAGS.
Thus, we can rename ("raise") it to GCC48_IA32_X64_DLINK_COMMON.
(It's easier to review this patch with "git show --word-diff".)
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1377
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The last patch decremented references on a number of DEFs. They can be
classified into three groups:
(a) those that remain used by multiple toolchains, or by multiple
definitions of a given toolchain (refcount >= 2):
- GCC_ASLCC_FLAGS
- GCC_ASLPP_FLAGS
- GCC_HOST_PREFIX
- GCC_IA32_RC_FLAGS
- GCC_PP_FLAGS
- GCC_VFRPP_FLAGS
- GCC_X64_RC_FLAGS
- IASL_FLAGS
- IASL_OUTFLAGS
- UNIX_IASL_BIN
- GCC44_IA32_X64_DLINK_FLAGS (!)
(b) those that are only used by GCC48 (refcount == 1):
- GCC44_ASM_FLAGS
- GCC44_IA32_CC_FLAGS
- GCC44_IA32_DLINK2_FLAGS
- GCC44_IA32_X64_ASLDLINK_FLAGS
- GCC44_X64_CC_FLAGS
- GCC44_X64_DLINK2_FLAGS
- GCC44_X64_DLINK_FLAGS
(c) those that are no longer used (refcount == 0):
- GCC44_IA32_PREFIX
- GCC44_X64_PREFIX
For the members of class (b), expand their definitions at the referring
sites, and remove their definitions.
For the members of class (c), remove their definitions.
(It's easier to review this patch with "git show --word-diff".)
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1377
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Remove the "leaf" definitions for GCC44. These definitions are never
referenced in "tools_def.template", so their removal can't break other
definitions. Instead, their erasure turns other definitions into leaves
(subject to further removal).
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1377
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
No GCC45 definitions exist at this point, so remove the GCC45
documentation too, from "tools_def.template".
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1377
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The last patch decremented references on a number of DEFs. They can be
classified into three groups:
(a) those that remain used by multiple toolchains (refcount >= 2):
- GCC_ASLCC_FLAGS
- GCC_ASLPP_FLAGS
- GCC_HOST_PREFIX
- GCC_IA32_RC_FLAGS
- GCC_PP_FLAGS
- GCC_VFRPP_FLAGS
- GCC_X64_RC_FLAGS
- IASL_FLAGS
- IASL_OUTFLAGS
- UNIX_IASL_BIN
(b) those that are only used by GCC48 (refcount == 1):
- GCC45_ASM_FLAGS
- GCC45_IA32_CC_FLAGS
- GCC45_IA32_DLINK2_FLAGS
- GCC45_IA32_X64_ASLDLINK_FLAGS
- GCC45_IA32_X64_DLINK_FLAGS
- GCC45_X64_CC_FLAGS
- GCC45_X64_DLINK2_FLAGS
- GCC45_X64_DLINK_FLAGS
(c) those that are no longer used (refcount == 0):
- GCC45_IA32_PREFIX
- GCC45_X64_PREFIX
For the members of class (b), expand their definitions at the referring
sites, and remove their definitions.
For the members of class (c), remove their definitions.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1377
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Remove the "leaf" definitions for GCC45. These definitions are never
referenced in "tools_def.template" (they are the last GCC45 mentions in
the file), so their removal can't break other definitions. Instead, their
erasure turns other definitions into leaves (subject to further removal).
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1377
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
No GCC46 definitions exist at this point, so remove the GCC46
documentation too, from "tools_def.template".
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1377
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The last patch decremented references on a number of DEFs. They can be
classified into three groups:
(a) those that remain used by multiple toolchains (refcount >= 2):
- GCC_ASLCC_FLAGS
- GCC_ASLPP_FLAGS
- GCC_HOST_PREFIX
- GCC_IA32_RC_FLAGS
- GCC_PP_FLAGS
- GCC_VFRPP_FLAGS
- GCC_X64_RC_FLAGS
- IASL_FLAGS
- IASL_OUTFLAGS
- UNIX_IASL_BIN
(b) those that are only used by GCC48 (refcount == 1):
- GCC46_ASM_FLAGS
- GCC46_IA32_CC_FLAGS
- GCC46_IA32_DLINK2_FLAGS
- GCC46_IA32_X64_ASLDLINK_FLAGS
- GCC46_IA32_X64_DLINK_FLAGS
- GCC46_X64_CC_FLAGS
- GCC46_X64_DLINK2_FLAGS
- GCC46_X64_DLINK_FLAGS
(c) those that are no longer used (refcount == 0):
- GCC46_IA32_PREFIX
- GCC46_X64_PREFIX
For the members of class (b), expand their definitions at the referring
sites, and remove their definitions.
For the members of class (c), remove their definitions.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1377
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Remove the "leaf" definitions for GCC46. These definitions are never
referenced in "tools_def.template" (they are the last GCC46 mentions in
the file), so their removal can't break other definitions. Instead, their
erasure turns other definitions into leaves (subject to further removal).
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1377
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
No GCC47 definitions exist at this point, so remove the GCC47
documentation too, from "tools_def.template".
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1377
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The last patch decremented references on a number of DEFs. They can be
classified into three groups:
(a) those that remain used by multiple toolchains (refcount >= 2):
- GCC_ASLCC_FLAGS
- GCC_ASLPP_FLAGS
- GCC_HOST_PREFIX
- GCC_IA32_RC_FLAGS
- GCC_PP_FLAGS
- GCC_VFRPP_FLAGS
- GCC_X64_RC_FLAGS
- IASL_FLAGS
- IASL_OUTFLAGS
- UNIX_IASL_BIN
(b) those that are only used by GCC48 (refcount == 1):
- GCC47_ASM_FLAGS
- GCC47_IA32_CC_FLAGS
- GCC47_IA32_DLINK2_FLAGS
- GCC47_IA32_X64_ASLDLINK_FLAGS
- GCC47_IA32_X64_DLINK_FLAGS
- GCC47_X64_CC_FLAGS
- GCC47_X64_DLINK2_FLAGS
- GCC47_X64_DLINK_FLAGS
(c) those that are no longer used (refcount == 0):
- GCC47_IA32_PREFIX
- GCC47_X64_PREFIX
For the members of class (b), expand their definitions at the referring
sites, and remove their definitions.
For the members of class (c), remove their definitions.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1377
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Remove the "leaf" definitions for GCC47. These definitions are never
referenced in "tools_def.template" (they are the last GCC47 mentions in
the file), so their removal can't break other definitions. Instead, their
erasure turns other definitions into leaves (subject to further removal).
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1377
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
DLINK_COMMON definitions are not consumed by "build_rule.template";
instead, DLINK_COMMON definitions (internal to "tools_def.template") were
invented for sharing options between ASLDLINK_FLAGS and DLINK_FLAGS.
However, this intent doesn't actually apply to
GCC48_IA32_X64_DLINK_COMMON: it is never consumed. Furthermore, the
GCC45..GCC47 instances of IA32_X64_DLINK_COMMON too lead up to
GCC48_IA32_X64_DLINK_COMMON only -- they form a dead-end. Remove them
altogether, in order to simplify the subsequent patches.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1377
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Whitespace just before line terminators is useless, remove it.
("git show -b" produces a null diff for this patch.)
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1377
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This drops ARM and AARCH64 support from the GCC46 and GCC47 toolchain
definitions, which are on the list to be removed, along with VS2003,
VS2005, VS2008, VS2010, DDK3790, UNIXGCC, GCC44, GCC45, ELFGCC, CYGGCC,
ICC, ICC11 and MYTOOLS.
Since GCC46 and GCC47 are the only ones on that list that support ARM
and/or AARCH64, let's give Liming a hand and cover the ARM side of
things first, so that everything that remains to be removed is x86
only.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1377
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Liming Gao <liming.gao@intel.com>
[lersek@redhat.com: add bugzilla reference and CCs]
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The standalone MM core is executed in place, and resides in a
separate execution context which may be space constrained.
Since code and data may be mapped with different attributes for
security reasons, the PE/COFF binary could have a section
alignment of 4 KB.
This means that any relocation data is not only useless, but it
will also take up 4 KB of valuable space.
So add support for the RELOCS_STRIPPED attribute on FFS files of
this type, so that we can get rid of the .reloc section altogether.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1410
BaseTools should not generate C structure array initial value
if the value is not specified with CODE style.
This patch is going to remove the incorrect initial value statement
and correct the Pcd Array value assignment statement.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This patch is going to fix the regression issue
by 72a1d77694
After enable PCD array, the Pcd.OverrideStruct has a new
key, array index, but the build report is not changed correspondingly.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1423
There is usage model that SecCore and PeiCore are in different FVs.
Update BaseTools to support this usage model.
Test: Verified on internal platform with the case SecCore and
PeiCore in different FVs and built/booted successfully.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1418
This patch is going to fix a regression issue that is introduced
by commit b3497bad12.
Before commit b3497b, build launched a external GenFds.py to generate
Fd, so the global variable in GenFds.py was reset in each execution.
After commit b3497b, each GenFds run in the same python interpeter, so
we need to explicitly reset global variable in each GenFdsApi call.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The 'arm-linux-gnueabihf' target triplet we use for CLANG35 and
CLANG38 specifies a hardfloat target, and so the binaries that are
emitted are annotated as using VFP registers for passing floating
point arguments, even though no VFP is used anywhere in the code.
This works fine as long as we don't try to link against code
that uses software floating point, but combining object files
with different floating point calling conventions is not permitted.
So switch to the softfloat arm-linux-gnueabi triplet instead.
This affects both the name Clang uses when invoking the linker,
and the arguments it passes to it, and we are mostly interested
in the latter (since any version of GNU ld.bfd will do the right
thing as long as it targets EABI ARM)
For native builds, this change has no effect, since the unprefixed
system linker will take priority, and so Clang will pass the right
arguments to whichever linker happens to be the system linker.
For cross builds, the fact that Clang composes the name of the
linker by prefixing '-ld' with the target triplet implies that
users will have to switch to a version of binutils that targets
arm-linux-gnueabi rather than arm-linux-gnueabihf. Note that the
GCCx toolchain targets can use either when building for ARM so this
does not create a need to install two versions of the ARM cross
toolchain. Also, note that all ARM toolchains in the GCC family
are already documented as requiring a toolchain that targets
arm-linux-gnueabi and not arm-linux-gnueabihf.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The ARM linker may emit veneers, i.e., trampolines, when ordinary
direct relative branches cannot be used, e.g., for Thumb interworking
or branch targets that are out of range.
Usually, such veneers carry an absolute reference to the branch
target, which is problematic for us, since these absolute references
are not covered by annotations that are visible to GenFw in the
PE/COFF conversion, and so these absolute references are not fixed
up by the PE/COFF loader at runtime.
So switch to all ARM GNU ld toolchains to position independent veneers.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Fix a bug because of b3497bad12.
Before the patch, when GenFds fail, the build continue and return success.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Derek Lin <derek.lin2@hpe.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
current edk2\BaseTools\Conf\build_rule.template, the compile of nasm
source files does not have the $(INC) support.
The '-I' option only includes the directory of the nasm source file
(${s_path}(+)). Hence, it will be impossible for nasm files to include
files outside of the nasm source file directory.
As a comparison, the compile of both .s and .asm have $(INC) support
in their compile commands.
Fixes: https://bugzilla.tianocore.org/show_bug.cgi?id=1085
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1406
This patch is going to fix the regressions that
is introduced by commit 2f818ed0fb
The internal array for storing the metadata info should be cached
so that the meta file is parsed only once in one build.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1390
1. support hex number for array index
2. support Non-Dynamic Pcd for array data type
3. support {} and {CODE()} for array data type
4. Change GetStructurePcdMaxSize to be a static function since it need to
be called in another static function. And this function does not depend on
it's class instance.
5. Add unittest for RemoveCComments function and
ArrayIndex regular expression.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Philippe Mathieu-Daud? <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1386
This patch is going to fix the regression issue that is
introduced by commit 72a1d77694
The issue will happen in the following cases:
1. There is no Pcd value assignment in Dsc file
2. There are duplicate Pcd filed assignment
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1387
This patch is going to fix the regression issue which is
introduced by commit bf9e636605.
This patch Remove the CopyDict incorrect usage for non-dict
input data. Add a check for CopyDict input.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1385
This patch is going to fix the regression issue that is
introduced by commit e6eae3b4c7
and commit 0b6c5954e1.
PcdNvStoreDefaultValueBuffer value is update to Vpd Info File,
but it is not update into a internal cache. This patch will
fix this incorrect value in that internal cache.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
PE/COFF only has a very limited id space for runtime relocations, and
so it defines only a single relocation for movw/movt instruction pairs,
which can be combined to load a 32-bit symbol reference into a register.
For this to work as expected, these instructions must always appear in
the same order and adjacently, and this is something few compilers take
into account, unless they target PE/COFF explicitly (and this is not the
case for our ELF based toolchains)
For Clang 3.6 and later, we can pass the -mno-movt option to suppress
movw/movt pairs entirely, which works around the issue. Unfortunately,
for Clang 3.5, the option is called differently (-mllvm -arm-use-movt=0)
and mutually incompatible between 3.5 and 3.6.
Since it is desirable for the CLANG35 toolchain to be usable on newer
versions of Clang as well (given that it is the only non-LTO alternative
to CLANG38), let's work around this issue in a way that permits versions
3.5 and newer of Clang to be used with the CLANG35 profile.
So pass the -mkernel flag instead (and add -Qunused-argument so Clang
does not complain about the -mno-unaligned-access in ARM_CC_XIPFLAGS).
This also inhibits movw/movt generation, along with some other changes
(e.g., long calls) which do affect code generation but not in an
undesirable manner.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
We currently permit R_ARM_GOT_PREL relocations in the ELF32 conversion
routines, under the assumption that relative relocations are fine as
long as the section layout is the same between ELF and PE/COFF.
However, as is the case with any proxy generating relocation, it is
up to the linker to emit an entry in the GOT table and populate it
with the correct absolute address, which should also be fixed up at
PE/COFF load time. Unfortunately, the relocations covering the GOT
section are not emitted into the static relocation sections processed
by GenFw, but only in the dynamic relocation section as a R_ARM_RELATIVE
relocation, and so GenFw fails to emit the correct PE/COFF relocation
data for GOT entries.
Since GOT indirection is pointless anyway for PE/COFF modules running
in UEFI context, let's just drop the references to R_ARM_GOT_PREL from
GenFw, resulting in a build time failure rather than a runtime failure
if such relocations do occur.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Since 4 KB section alignment is required when mapping PE/COFF images
with strict permissions, update the default section alignment when
using GCC49 and GCC5 in RELEASE mode. Note that XIP modules such as
SEC, PEIMs or PEI core are not affected by this change, since the
override to 32 byte aligment remains in effect.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1361
This patch is going to correct the CCFlag
for building PcdValueInit
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: BobCF <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1288
This patch is one of build tool performance improvement
series patches.
This patch is going to customize the deepcopy function for
SkuClass, PcdClassObject and python dictionary.
python deepcopy copy everything of a object, but for our current
usage we just need to copy the data we care about recursively.
By implementing __deepcopy__ for SkuClass, PcdClassObject, we can customize
deepcopy function for them.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: BobCF <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1288
This patch is one of build tool performance improvement
series patches.
This patch is going to use join function instead of
string += string2 statement.
Current code use string += string2 in a loop to combine
a string. while creating a string list in a loop and using
"".join(stringlist) after the loop will be much faster.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: BobCF <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1288
[V2]
Optimize this patch so that it can be easy to review.
This patch is just apply the change to original files while
not create new similar files.
[V1]
This patch is one of build tool performance improvement
series patches.
This patch is going to use python list to store the parser data
instead of using sqlite database.
The replacement solution is as below:
SQL insert: list.append()
SQL select: list comprehension. for example:
Select * from table where field = “something”
->
[ item for item in table if item[3] == “something”]
SQL update: python map function. for example:
Update table set field1=newvalue where filed2 = “something”.
-> map(lambda x: x[1] = newvalue,
[item for item in table if item[2] == “something”])
SQL delete: list comprehension.
With this change, We can save the time of interpreting SQL statement
and the time of write database to file system
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: BobCF <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
V2:
Extract the common part of new API and the original main() function
into one function.
V1:
https://bugzilla.tianocore.org/show_bug.cgi?id=1288
Currently, AutoGen and GenFds run in different python interpreters. The
parser are duplicated. This patch is going to create new API for GenFds
and have the build to call that API instead of executing GenFds.py. As
such, the GenFds and build can share the parser data.
This patch is expected to save the time of GenFds about 2~3 seconds.
More details will be logged in BZ.
This is the summary measure data generated from python cProfile for
building Ovmf.
Currently:
8379147 function calls (8135450 primitive calls) in 12.580 seconds
After applying this patch:
3428712 function calls (3418881 primitive calls) in 8.944 seconds
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: ZhiqiangX Zhao <zhiqiangx.zhao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Carsey Jaben <jaben.carsey@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
V2:
Fixed the issue that V1 adds new check
to the Pcds in the platform unused library INF files.
It breaks the existing platform.
V1?
The current code handle all the structure pcds
even if there is no module or library use them.
This patch is going to filter out the unused structure pcds.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
add a variable for the string '*' and then use it instead of lots of '*'
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by : Bob Feng <bob.c.feng@intel.com>
1) remove an identical function and import it from Common.LongFilePathSupport
2) remove an import that is not needed/used.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by : Bob Feng <bob.c.feng@intel.com>
The macro MAX_ADDRESS represents the largest virtual address that
is valid for a certain architecture. For the BaseTools, this quantity
is irrelevant, since the same tools can be used to build for different
targets.
Since we only refer to it in a single place, which is an ASSERT() that
doesn't seem particularly useful (it ensures that memcpy() will not
be called with arguments that will make it read beyond the end of the
address space and wrap around), let's drop the ASSERT and all references
to MAX_ADDRESS.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Given that DuetPkg will be removed, tools only used by
DuetPkg can also be removed after its removal operation.
https://bugzilla.tianocore.org/show_bug.cgi?id=1322
v2:Remove these tools in Makefile and GNUmakefile.
v4:Remove these tools in BinWrappers/PosixLike/ and
UserManuals.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The maximum value that can be represented by the native word size
of the *target* should be irrelevant when compiling tools that
run on the build *host*. So drop the definition of MAX_UINTN, now
that we no longer use it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Parsing a string into an integer variable of the native word size
is not defined for the BaseTools, since the same tools may be used
to build firmware for different targets with different native word
sizes.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Replace the default size limit of IsDevicePathValid() with a value
that does not depend on the native word size of the build host.
4 GiB seems sufficient as the upper bound of a device path handled
by UEFI.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Since we will be dropping the definition of MAX_UINTN, whose meaning
is ambiguous for the BaseTools, add a definition of MAX_UINT32 that
we can switch to.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Replace invocations of StrHexToUintn() with StrHexToUint64(), so
that we can drop the former.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Don't use the native word size string to number parsing routines,
but instead, use the 64-bit one and cast to UINTN.
Currently, the only user is in Source/C/DevicePath/DevicePathFromText.c
which takes care to use Strtoi64 () unless it assumes the value fits
in 32-bit, so this change is a no-op even on 32-bit build hosts.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
In the context of the BaseTools, there is no such thing as a native word
size, given that the same set of tools may be used to build a firmware
image consisting of both 32-bit and 64-bit modules.
So update StrToIpv4Address() and StrToIpv6Address() to use UINT64
types instead of UINTN types when parsing strings.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
GenVtf C tool is IPF specific. IPF support has been removed
from edk2 trunk. This tool can be removed.
https://bugzilla.tianocore.org/show_bug.cgi?id=1349
v2:Remove GenVtf in Makefile and GNUmakefile.
v3:Remove BinWrappers/PosixLike/GenVtf and the user manual
of GenVtf.
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1297
When the header files are not found for the used C structure, this script will
report the warning, let user know there is no header file to define C structure.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Wang BinX A <binx.a.wang@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1330
This patch is going to fix the problem using FILE_GUID override in .dsc.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: BobCF <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1317
This is a regression issue caused by 041d89bc0f.
In Decode() function, once mOutBuf is fully filled, Decode() should return.
Current logic misses the checker of mOutBuf after while() loop.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
V3:
Update the patch to avoid "reduce" function fail.
V2:
Support to extract the common cc flag from a
combined cc flag string. For example
MSFT:*_*_IA32_CC_FLAGS = /D DISABLE_NEW_DEPRECATED_INTERFACES /DDEF_IA32
MSFT:*_*_X64_CC_FLAGS = /DDEF_X64 /D DISABLE_NEW_DEPRECATED_INTERFACES
V1:
Use common cc flags for building PcdValueInit. The common
cc flags include the cc flag which is under common arch and
under all build arches.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Update aslc rule to rename the temp output file from .efi to .pecoff.
This change can avoid the conflict .efi file name in output directory.
One is the driver image, another is aslc temp output file.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
According to PCD_DATABASE_INIT in
edk2\MdeModulePkg\Include\Guid\PcdDataBaseSignatureGuid.h,
the max size for string PCD should not exceed USHRT_MAX 65535(0xffff).
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: ZhiqiangX Zhao <zhiqiangx.zhao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
GCC link script is used to discard the unused section data from ELF image.
ASLDLINK_FLAGS requires it to remove the unnecessary section data, then
GenFw can be used to retrieve the correct data section from ELF image.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
This patch is going to add a check that only if the
attribute of a EFI variable include 'NV', it will be
added into PcdNvStoreDefaultValueBuffer.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This reverts commit 51d17bb7b0.
commit 51d17bb7b0 adds new check
of Pcds in the platform unused library INF files.
It breaks the existing platform.
To avoid the impact, roll back this change first.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob C Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Roll back code modify by commit 9e47e6f908,
if ForceRebase not False or True, the GenFv command not need add parameter
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yunhua Feng <yunhuax.feng@intel.com>
For structure PCD, if it is a FixedAtBuild PCD, the full assign value in
dsc file should not be missed when updating the structure PCD value.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: ZhiqiangX Zhao <zhiqiangx.zhao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
The MacroDict parameter goes around in circles through 4 functions without use.
1. GetSectionData calls into GetLeafSection, otherwise doesn?t use MacroDict
2. GetLeafSection calls into GetFileStatement, otherwise doesn?t use MacroDict
3. GetFileStatement calls into GetFilePart, otherwise doesn?t use MacroDict
4. GetFilePart calls into GetSectionData, otherwise doesn?t use MacroDict
Go to 1 and repeat forever.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Change lists and tuples used solely for "in" testing to sets.
These operations are not order dependent.
fixed some line length for PEP8 compliance on some.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
1) remove wildcard imports and use explicit imports
2) refactor to use shared variables from Common/DataType
3) rename to not shadow imports
4) don't assign a variable in a loop (just do final assignment)
5) remove spaces, parens, unused or commented out code, etc.
6) merge unnecessary parent classes into child
7) refactor to share DXE and PEI apriori GUIDs from one place
this includes changes to Build and EOT files
8) for PEP8, dont use __ for custom methods.
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob C Feng <bob.c.feng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
.nasm source file may include some header files.
header file should be listed in Makefile as .nasm source file
dependency.
But now, BaseTools doesn't find them and list them in Makefile.
This is a missing, because original ASM file supports it.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
original we get the VPD PCD items from the VPDGuid.map file in the FV
output folder. but this logic doesn't work when 1) there only have
single non Default SKU, 2) there have multiple SKU with same value.
Now we change it to get the really VPD Pcd items that already display
in the PCD section of the report.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
V2: remove the not used parameter i
Fix the bug for Pcd used in command line not override the Pcd used
in the [component] driver's sub-section.
Case:
DSC file:
[PcdsFixedAtBuild]
TokenSpaceGuid.PcdTest
[Components]
TestPkg/TestDriver.inf {
<PcdsFixedAtBuild>
TokenSpaceGuid.PcdTest|"b"
}
build command with --pcd TokenSpaceGuid.PcdTest="AAAABB"
Then we found the Pcd value in the AutoGen.c file is incorrect,
because of the incorrect logic that use the pcd in the [component]
section to re-override it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
PcdValueInit tool is platform scope.
It should be generated into Platform output directory.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob C Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The current code handle all the structure pcds
even if there is no module or library use them.
This patch is going to filter out the unused structure pcds.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
PcdValueInit tool is Arch independent, the Arch specific
build options should be removed from PcdValueInit makefile.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob C Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
For StructurePCD value got from DSC file, translate its field value in to
correct format in report.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: ZhiqiangX Zhao <zhiqiangx.zhao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
For void* type pcd in command line, if its value is string, code should
not convert the void* pcd string in command line to array, otherwise it
will make the pcd value in report not match its real raw value.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: ZhiqiangX Zhao <zhiqiangx.zhao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
For structure PCD in fdf file and command line,
1. use compiler time assert to check the array index, report error
if array index exceeds the array number.
2. use compiler time assert to check the array size, report error
if the user declared size in header file is smaller than the user
used in fdf file and command line.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: ZhiqiangX Zhao <zhiqiangx.zhao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
The tool now can detect the error that the content between double
quotes contains another double quotes or enter key.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hess Chen <hesheng.chen@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Change the criteria of the checkpoint of "#ifndef" to remove the requirement of prefix '_'.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hess Chen <hesheng.chen@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Because of we newly add the PcdFieldValueFromComm and
PcdFieldValueFromFdf in early parser phase, so in the report we use
the saved value in this two variables to print it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
V2:
Fixed 3 typo.
Use startswith(('L"',"L'")) to check if a string is Unicode string.
Use a set PcdValueTypeSet instead of a list PcdValueTypeList to save
memory.
V1:
For the same one VOID* pcd, if the default value type of one SKU is
"Unicode string", the other SKUs are "OtherVOID*"(ASCII string or
byte array),Then convert "Unicode string" to "byte array".
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: ZhiqiangX Zhao <zhiqiangx.zhao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
V2:
Make the code of patch both compatible for Python2 and Python3.
V1:
If different PCDs refer to the same EFI variable, then do EFI variable
combination, according to the VariableOffset of different PCDS.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: ZhiqiangX Zhao <zhiqiangx.zhao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
The case is:
in the DSC file:
SKUID_IDENTIFIER = ALL
[SkuIds]
0|DEFAULT
1|A
[PcdsFixedAtBuild.common.A]
TokenSpaceGuid.Test401|{0x0F, 0x12}
TokenSpaceGuid.Test401.TEST401INT8ARRAY[0]|'B'
in the build report, Data = OverrideValues[Keys[0]], but the Keys[0]
is the keyword "DEFAULT", and in this case the "DEFAULT" SKU doesn't
save any value, then it cause the Data is empty, in the next code
when we use the code it cause crash.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The case is use Dynamic structure Pcd in the FDF file.
Current code already save the Guid, Name and Filed info for those Pcd,
but it directly use the dict key as [Name, Guid] and cause this crash
issue.
Fixes: https://bugzilla.tianocore.org/show_bug.cgi?id=1264
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
the bug is PcdValueFromComm is not set, but the Pcd have been override
by the command line option.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
In the expression for unicode string and general string compare, it
should check whether it startswith "L'" or 'L"', but not "L".
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
the case is:
in the DSC:
[PcdsFixedAtBuild.common]
TokenSpaceGuid.TestFixedPcd|0xFFEAA000
[PcdsDynamicExDefault.common.DEFAULT]
!if TokenSpaceGuid.PcdFlag == TRUE
TokenSpaceGuid.PcdTest|TokenSpaceGuid.TestFixedPcd
!endif
Then build with --pcd TokenSpaceGuid.PcdFlag=TRUE, it report failure,
but if we build without this --pcd option, it could build success.
we found when the --pcd is enabled, the fixedatbuild pcds are not be
collected into expression to calculate.
Fixes: https://bugzilla.tianocore.org/show_bug.cgi?id=1256
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Update the EOT tool to call the program itself instead of calling the Python API when parsing FV images.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hess Chen <hesheng.chen@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Acked-by: Jaben Carsey <jaben.carsey@intel.com>
Original it hard code to use "VOID*", this patch extend it to both
support VOID* and valid struct name.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Relational and equality operators require both operands to be of
the same type.
Treat the string 'A' and "A" as same type, but for "A" and L"A"
are not same type since one is general string, another is unicode
string.
True:'A'<'B', "A"<"B" 'A'<"B", L'A'<L'B', L"A"<L"B", L'A'<L"B"
Error:'A'<L'B', 'A'<L"B", "A'<L'B'
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The commit 84a52d4d03 will introduce
the new issue "Invalid offset value for Dynamic Vpd PCD". This patch
will fix the new issue, add 'DEFAULT' sku in to the AvailableSkuIdSet
variable.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: ZhiqiangX Zhao <zhiqiangx.zhao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
For void* type pcd in command line, if its value is string, then
convert the string value to array format. For example,
build --pcd gUefiOvmfPkgTokenSpaceGuid.PcdTest="c",
convert the pcd value from "c" to "{0x63,0x00}".
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: ZhiqiangX Zhao <zhiqiangx.zhao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Code should not update the value of variable which save the original
raw content of meta file.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: ZhiqiangX Zhao <zhiqiangx.zhao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
V3:
Update the error message for array checker.
V2:
1. Add comments for each ASSERT.
2. ASSERT need to skip the case of array size of array as zero. For
example, TestArray[] in struct in header file.
V1:
For structure PCD,
1. use compiler time assert to check the array index, report error
if array index exceeds the array number.
2. use compiler time assert to check the array size, report error
if the user declared size in header file is smaller than the user
defined in DEC/DSC file.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: ZhiqiangX Zhao <zhiqiangx.zhao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add one new option --uefi to enable UefiCompress.
(re-add this patch since it be reverted in Python3 migration patches,
but this patch is not related with Python3)
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yunhua Feng <yunhuax.feng@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Cover the case:
1.only define the structure Pcd in DEC file, it should not have any
Flag.
2.In the DEC file and DSC file only have the PCD's default value, and
without the field value, it should have *P Flag.
(re-add this patch since it be reverted in Python3 migration patches,
but this patch is not related with Python3)
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
increment build generate inf file in output directory lost .depex file info.
(re-add this patch since it be reverted in Python3 migration patches,
but this check is not related with Python3)
Fixes: https://bugzilla.tianocore.org/show_bug.cgi?id=1244
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yunhua Feng <yunhuax.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
the PyUtility is not used, so we remove it.
(re-add this patch since it be reverted in Python3 migration patches,
but this check is not related with Python3)
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This reverts commit 6693f359b3c213513c5096a06c6f67244a44dc52..
678f851312.
Python3 migration is the fundamental change. It requires every developer
to install Python3. Before this migration, the well communication and wide
verification must be done. But now, most people is not aware of this change,
and not try it. So, Python3 migration is reverted and be moved to edk2-staging
Python3 branch for the edk2 user evaluation.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
For structure Pcd, the type defined in the DEC file is the struct name
while if this Pcd used in the DSC file, it should add VOID* keywords
when it have max size info. so this patch filter the type compare for
this case.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Cover the case:
1.only define the structure Pcd in DEC file, it should not have any
Flag.
2.In the DEC file and DSC file only have the PCD's default value, and
without the field value, it should have *P Flag.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
the PyUtility is not used, so we remove it.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
1. Add Python 3 support on ECC and EOT tools
2. Add C grammar file of ANTLR4 and fix some bugs
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hess Chen <hesheng.chen@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Fan, ZhijuX
Felix Polyudov
Feng, Bob C
Liming Gao
Ard Biesheuvel
Carsey, Jaben
Dandan Bi
Laszlo Ersek
Chasel, Chiu
Derek Lin
Zhao, ZhiqiangX
Shenglei Zhang
Hess Chen
Tomas Pilar
Feng, YunhuaX
Yonghong Zhu