Replace a <LF> line ending that was introduced inadvertently by a
recent commit with the correct <CR><LF>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Some builds of GCC/binutils will default to using the GNU flavor of
the symbol hash table, and will emit it into a section called .gnu.hash
rather than .hash. We have no use for its contents, and GenFw ignores
it anyway, so it shouldn't really matter what we do with it.
However, due to a workaround for AARCH64 we have in GenFw to deal with
older GCCs that corrupt section-based relocations when merging sections
during the final link, we need the ELF and PE/COFF views of the binary
to be identical. Since we don't place the .gnu.hash section explicitly,
it may end up at the beginning of the ELF binary, causing other sections
to be shifted in the ELF view but not in the PE/COFF view.
So let's add .gnu.hash to the GCC linker script. We don't care about its
contents so add it to the /DISCARD/ section.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The generated AutoGen.c files mostly contain read-only data, but due to
lacking annotations, all of it is emitted into the .data section by the
compiler.
Given that GUIDs are UEFI's gaffer tape, having writable GUIDs is a
security hazard, and this was the main rationale for putting AutoGen.obj
in the .text section. However, as it turns out, patchable PCDs are emitted
there as well, which can legally be modified at runtime.
So update the wildcard pattern to only match g...Guid sections, and move
everything else back to .data (Note that this relies on -fdata-sections,
without that option, everything is emitted into .data)
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Fixes: 233bd25b00
[lersek@redhat.com: add reference to previous commit being fixed up]
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
This tool accepts the input XML file generated by SmiHandlerProfile
application and convert the RVA address to be a user readable
symbol.
It also converts the GUID to be a user readable string.
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=228
Add a utility that converts a binary file into a VOID* PCD value
or a full DSC file VOID* PCD statement with support for all the
DSC supported PCD sections.
usage: BinToPcd [-h] [--version] -i INPUTFILE [-o OUTPUTFILE] [-p PCDNAME]
[-t {VPD,HII}] [-m MAXSIZE] [-f OFFSET] [-n VARIABLENAME]
[-g VARIABLEGUID] [-v] [-q] [--debug [0-9]]
Convert a binary file to a VOID* PCD value or DSC file VOID* PCD statement.
Copyright (c) 2016, Intel Corporation. All rights reserved.
optional arguments:
-h, --help show this help message and exit
--version show program's version number and exit
-i INPUTFILE, --input INPUTFILE
Input binary filename
-o OUTPUTFILE, --output OUTPUTFILE
Output filename for PCD value or PCD statement
-p PCDNAME, --pcd PCDNAME
Name of the PCD in the form
<PcdTokenSpaceGuidCName>.<PcdCName>
-t {VPD,HII}, --type {VPD,HII}
PCD statement type (HII or VPD). Default is standard.
-m MAXSIZE, --max-size MAXSIZE
Maximum size of the PCD. Ignored with --type HII.
-f OFFSET, --offset OFFSET
VPD offset if --type is VPD. UEFI Variable offset if
--type is HII.
-n VARIABLENAME, --variable-name VARIABLENAME
UEFI variable name. Only used with --type HII.
-g VARIABLEGUID, --variable-guid VARIABLEGUID
UEFI variable GUID C name. Only used with --type HII.
-v, --verbose Increase output messages
-q, --quiet Reduce output messages
--debug [0-9] Set debug level
This utility can be used in PCD value mode to convert a binary
file into a string that can then be copied into the PCD value field
of a VOID* PCD. The following is an example of PCD value mode on
an 8 byte test.bin file.
BinToPcd.py -i test.bin
{0x48, 0x65, 0x6c, 0x6c, 0x6f, 0x20, 0x0d, 0x0a}
The DSC file VOID* PCD statement mode can be used to generate a
complete PCD statement for the PCD section types that a DSC file
supports:
[PcdsFixedAtBuild]
[PcdsPatchableInModule]
[PcdsDynamicDefault]
[PcdsDynamicExDefault]
[PcdsDynamicVpd]
[PcdsDynamicExVpd]
[PcdsDynamicHii]
[PcdsDynamicExHii]
The PCD statement mode is useful when combined with a !include
statement in a DSC file. BinToPcd.py can be used to convert a
binary file to a PCD statement in an output file, and that output
file can be included into a DSC file in the matching PCD section
to set the value of the PCD to the value from the binary file
without having to copy the value into the DSC file. Updates can be
made to the included file without editing the DSC file. Some
example use cases are the setting the public key PCDs such as:
gEfiSecurityPkgTokenSpaceGuid.PcdRsa2048Sha256PublicKeyBuffer
gEfiSecurityPkgTokenSpaceGuid.PcdPkcs7CertBuffer
The following example converts a public key binary file to a
[PcdsFixedAtBuild] compatible PCD statement:
BinToPcd.py -i PublicKey.bin -o PublicKey.pcd
--pcd gEfiSecurityPkgTokenSpaceGuid.PcdPkcs7CertBufferkenSpaceGuid
The PublicKey.pcd output file contains a single line:
gEfiSecurityPkgTokenSpaceGuid.PcdPkcs7CertBuffer|{0x48, ...}
A DSC file can be updated to include the PublicKey.pcd file:
[PcdsFixedAtBuild]
!include PublicKey.pcd
Value examples
===============
BinToPcd.py -i test.bin
{0x68, 0x65, 0x6c, 0x6c, 0x6f, 0x20, 0x0d, 0x0a}
Normal examples:
=================
BinToPcd.py -i test.bin -p Guid.Token
Guid.Token|{0x68, 0x65, 0x6c, 0x6c, 0x6f, 0x20, 0x0d, 0x0a}
BinToPcd.py -i test.bin -p Guid.Token -m 20
Guid.Token|{0x68, 0x65, 0x6c, 0x6c, 0x6f, 0x20, 0x0d, 0x0a}|VOID*|20
VPD examples:
=============
BinToPcd.py -i test.bin -p Guid.Token -t VPD
Guid.Name|*|8|{0x48, 0x65, 0x6c, 0x6c, 0x6f, 0x20, 0x0d, 0x0a}
BinToPcd.py -i test.bin -p Guid.Token -t VPD -f 20
Guid.Name|20|8|{0x48, 0x65, 0x6c, 0x6c, 0x6f, 0x20, 0x0d, 0x0a}
BinToPcd.py -i test.bin -p Guid.Token -t VPD -m 10
Guid.Name|*|10|{0x48, 0x65, 0x6c, 0x6c, 0x6f, 0x20, 0x0d, 0x0a}
BinToPcd.py -i test.bin -p Guid.Token -t VPD -f 20 -m 10
Guid.Name|20|10|{0x48, 0x65, 0x6c, 0x6c, 0x6f, 0x20, 0x0d, 0x0a}
HII examples:
=============
BinToPcd.py -i test.bin -p Guid.Token -t HII -g VarGuid -n VarName
Guid.Name|L"VarName"|VarGuid|0|{0x48, 0x65, 0x6c, 0x6c}
BinToPcd.py -i test.bin -p Guid.Token -t HII -g VarGuid -n VarName -f 8
Guid.Name|L"VarName"|VarGuid|8|{0x48, 0x65, 0x6c, 0x6c}
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
In EDK2, DEBUG_* is recommended to be used instead of EFI_D_*. For new
code, they should use DEBUG_* macro.
Fixes:https://bugzilla.tianocore.org/show_bug.cgi?id=143
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The bug is that only remove the first [] when it does the char count,
however sometimes we use [edk2][patch] as prefix, this patch fix this bug.
Fixes: https://bugzilla.tianocore.org/show_bug.cgi?id=113
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This patch update PatchCheck.py:
1. The subject line of the commit message should be < 72 characters.
2. The other lines of the commit message should be < 76 characters.
Fixes: https://bugzilla.tianocore.org/show_bug.cgi?id=113
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The CLANG38 toolchain creates a PIE binary at link time. This is
necessary since the LTO code generation may otherwise result in
code that cannot execute correctly when loaded above 2 GB.
PIE executables contain a RELA section consisting of dynamic
relocation entries that are intended for consumption by the loader
at runtime. For this reason, it has the SHF_ALLOC attribute set by
default, and will be identified by GenFw as a section that needs to
be copied into the PE/COFF binary, resulting in waste of space since
the PE/COFF loader does not use this data at all.
So mark the RELA section as informational: this will prevent the
linker from setting the SHF_ALLOC attribute, causing GenFw to
ignore it.
DxeCore.efi before:
Detected 'X64' type PE/COFF image consisting of 3 sections
Section alignment: 0x40
File alignment: 0x40
Section '.text' @ 0x00000240
File offset: 0x240
Virtual size: 0x21000
Raw size: 0x21000
Section '.data' @ 0x00021240
File offset: 0x21240
Virtual size: 0x3640
Raw size: 0x3640
Section '.reloc' @ 0x00024880
File offset: 0x24880
Virtual size: 0x280
Raw size: 0x280
DxeCore.efi after:
Detected 'X64' type PE/COFF image consisting of 3 sections
Section alignment: 0x40
File alignment: 0x40
Section '.text' @ 0x00000240
File offset: 0x240
Virtual size: 0x1f440
Raw size: 0x1f440
Section '.data' @ 0x0001f680
File offset: 0x1f680
Virtual size: 0x3640
Raw size: 0x3640
Section '.reloc' @ 0x00022cc0
File offset: 0x22cc0
Virtual size: 0x280
Raw size: 0x280
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Recent versions of GNU ld automatically emit a .notes section into
the ELF binary containing a build id. Since this is an allocatable
section by default, it will be identified by GenFw as a section
that requires PE/COFF conversion, which may cause sections to be
moved around unexpectedly.
So retain the section, but tag it as INFO, which tells the linker
that it should not be accounted for in the binary's memory layout.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
According to UEFI spec:
Once an image is loaded, LoadImage() installs
EFI_HII_PACKAGE_LIST_PROTOCOL on the handle if the image contains a
custom PE/COFF resource with the type 'HII'. The protocol's
interface pointer points to the HII package list which is contained
in the resource's data.
This is controlled by the UEFI_HII_RESOURCE_SECTION define in the INF
file. When present the HII resource is linked with the module
binary.
Unfortunately GCC-built binaries have been stripping the .hii section
entirely. See "[edk2] HII gEfiHiiPackageListProtocolGuid problem
with GCC48(VS2012x86 works)"
http://thread.gmane.org/gmane.comp.bios.tianocore.devel/13438http://thread.gmane.org/gmane.comp.bios.tianocore.devel/14899
This patch tells the linker to preserve the .hii sections
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Thomas Palmer <thomas.palmer@hpe.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Bruce Cran <bruce.cran@gmail.com>
Reviewed-by: Bruce Cran <bruce.cran@gmail.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Current MemoryProfileSymbolGen.py assumes the rva is 32bits,
the patch is to remove the restriction to match any lengths
of rva.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
This tool depends on DIA2Dump.exe (VS) or nm (gcc) to parse debug entry.
Usage: MemoryProfileSymbolGen.py [--version] [-h] [--help] [-i inputfile
[-o outputfile]]
Copyright (c) 2016, Intel Corporation. All rights reserved.
Options:
--version show program's version number and exit
-h, --help show this help message and exit
-i INPUTFILENAME, --inputfile=INPUTFILENAME
The input memory profile info file output from
MemoryProfileInfo application in MdeModulePkg
-o OUTPUTFILENAME, --outputfile=OUTPUTFILENAME
The output memory profile info file with symbol,
MemoryProfileInfoSymbol.txt will be used if it is not
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
We now check to see if the destination .nasm file already exists. If
it does, then we don't try to convert the .asm to .nasm.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
In the first stage of conversion, we need to preserve the AT&T style
.s assembly files for use with OS X toolchains.
This change allows '--keep=s' to be used with the script to preserve
these files.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Python 3's filter and map functions returns an iterator which you
can't call len() on. Since we'll want to use len() later, we put the
filter results into a tuple.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The script is updated to support both python 2.7 and python 3.
v2:
* Use io.open() rather than open() (Jaben)
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Erik Bjorge <erik.c.bjorge@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Erik Bjorge <erik.c.bjorge@intel.com>
Convert to use the argparse library rather than optparse.
As part of the conversion, the script will now give an error message
if no arguments are given. Previously the script would give an
exception when no arguments were given.
Fixes: https://github.com/tianocore/edk2/issues/65
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The script previously would hit an exception if it was run outside of
a git tree.
The exception looked like:
edk2/BaseTools/Scripts/ConvertMasmToNasm.py Version 0.01
Traceback (most recent call last):
File "edk2/BaseTools/Scripts/ConvertMasmToNasm.py", line 986, in <module>
ConvertAsmApp()
File "edk2/BaseTools/Scripts/ConvertMasmToNasm.py", line 984, in __init__
ConvertAsmFile(src, dst, self)
File "edk2/BaseTools/Scripts/ConvertMasmToNasm.py", line 209, in __init__
CommonUtils.__init__(self, clone)
File "edk2/BaseTools/Scripts/ConvertMasmToNasm.py", line 69, in __init__
self.gitemail = clone.gitemail
AttributeError: ConvertAsmApp instance has no attribute 'gitemail'
Fixes: https://github.com/tianocore/edk2/issues/63
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
edk2 Edk2Setup.bat depends on those scripts to configure VS env.
Update them to support VS2015.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19431 6f19259b-4bc3-4df7-8a09-765794883524
This script uses python codecs to convert .uni string files between
the utf-16 and utf-8 formats.
The advantages of utf-8 data:
* Generally smaller files
* More commonly supported by editors
* Not treated as binary data in patch files
The script was tested on MdePkg with both python 2.7 and python 3.4.
It was able to convert all MdePkg .uni files between utf-8 and utf-16
multiple times always producing the same files for each format.
v2:
* Rename ConvertUtf16ToUtf8.py to ConvertUni.py
* Also support utf-8 to utf-16 conversion (with --utf-16)
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19247 6f19259b-4bc3-4df7-8a09-765794883524
Up until SVN r18540, GenFw created invalid PE/COFF binaries for the ARM
architecture, by allowing PE/COFF .data sections to appear at offsets
that were not aligned to the global PE/COFF section alignment. The
reason for this was that the relocation metadata emitted by RVCT's
armlink only contains dynamic absolute relocations, so it is impossible
to recalculate relative relocations between .text and .data, and so the
relative offset between the two needs to be preserved.
Since r18540, we do align .data to the PE/COFF section alignment,
resulting in potentially corrupt PE/COFF binaries unless .data happens
to appear at a 32-byte aligned offset. So let's introduce a RVCT scatter
file that sets this alignment for the ELF .data section (and subsequent
.bss section).
At the same time, set the start offset to 0x220 bytes (which is the size
of our 32-bit PE/COFF header) so that the memory layouts are identical
between ELF and PE/COFF. Also add a 4 KB aligned version that can be
used to build DXE_RUNTIME_DRIVER modules with runtime memory protection
enabled.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Eugene Cohen <eugene@hp.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19235 6f19259b-4bc3-4df7-8a09-765794883524
The default behavior of the GCC compiler is to emit uninitialized globals
with external linkage into a COMMON section, where duplicate definitions
are merged. This may result in unexpected behavior, since global variables
defined under the same name in different C files may not refer to the same
logical data item.
For instance, the definitions of EFI_EVENT mVirtualAddressChangeEvent that
[used to] appear in the following files:
CryptoPkg/Library/BaseCryptLib/SysCall/RuntimeMemAllocation.c
MdeModulePkg/Universal/Variable/RuntimeDxe/VariableDxe.c
will be folded into a single instance of the variable when the latter
module includes the former library, which can lead to unexpected results.
Even if some may argue that there are legal uses for COMMON allocation, the
high modularity of EDK2 combined with the low level of awareness of the
intracicies surrounding common allocation and the generally poor EDK2
developer discipline regarding the use of the STATIC keyword* make a strong
case for disabling it by default, and re-enabling it explicitly for packages
that depend on it.
So prevent GCC from emitting variables into the COMMON section, by passing
-fno-common to the compiler, and discarding the section in the GNU ld linker
script.
* Any function or variable that is only referenced from the translation unit
that defines it could be made STATIC. This does not only prevent issues
like the above, it also allows the compiler to generate better code, e.g.,
drop out of line function definitions after inlining all invocations or
perform constant propagation on variables.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19164 6f19259b-4bc3-4df7-8a09-765794883524
This allows a patch with binary data that is generated with --binary
to be parsed by the PatchCheck.py script.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19104 6f19259b-4bc3-4df7-8a09-765794883524
This script can be used to check some expected rules for EDK II
patches. It only works on git formatted patches.
It checks both the commit message and the lines that are added in the
patch diff.
In the commit message it verifies line lengths, signature formats, and
the Contributed-under tag.
In the patch, it checks that line endings are CRLF for all files that
don't have a .sh extension. It verifies that no trailing whitespace is
present and that tab characters are not used.
Patch contributors should use this script prior to submitting their
patches. Package maintainers can also use it to verify incoming
patches.
It can also be run by specifying a git revision list, so actual patch
files are not always required.
For example, to checkout this last 5 patches in your git branch you
can run:
python PatchCheck.py HEAD~5..
Or, a shortcut (like git log):
python PatchCheck.py -5
The --oneline option works similar to git log --oneline.
The --silent option enables silent operation.
The script supports python 2.7 and python 3.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Cc: Erik Bjorge <erik.c.bjorge@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Erik Bjorge <erik.c.bjorge@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18652 6f19259b-4bc3-4df7-8a09-765794883524
These scripts all now have the same contents, so we only need to use
GccBase.lds. Therefore we can delete gcc-4K-align-ld-script,
gcc4.4-ld-script and gcc4.9-ld-script.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18142 6f19259b-4bc3-4df7-8a09-765794883524
Now that we moved all users to the unified GCC linker script, remove
the old 64 KB incremental linker script for AARCH64 since it is now
unused.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18141 6f19259b-4bc3-4df7-8a09-765794883524
Drop the GCC AARCH64 specific linker script and use the new
unified one instead.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18138 6f19259b-4bc3-4df7-8a09-765794883524
All AutoGen.obj files consist of global GUID definitions, fixed
and patchable PCDs and other data that is essentially read-only at
runtime but has not been declared as such for various reasons.
By moving these contents to .text we achieve two things:
- global GUIDs and other data items which must be constant for correct
program operation can no longer be modified, for instance, when
running a DXE_RUNTIME_MODULE binary under the OS with the Properties
Table feature for memory protection enabled;
- the .data section becomes smaller, and may be dropped completely for
many XIP modules, which reduces wasted FV space if the PE/COFF section
alignment is large.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Liming Gao <liming.gao@intel.com>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18137 6f19259b-4bc3-4df7-8a09-765794883524
Now that GenFw honors the ELF section alignment when placing the
PE/COFF sections in the output, the start of the PE/COFF version of
.data will be aligned to the alignment of .text if its alignment is
higher than the default. So duplicate this behavior in the ELF output,
this will make the memory layout of the PE/COFF binary match the
layout of the ELF version more closely.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Liming Gao <liming.gao@intel.com>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18136 6f19259b-4bc3-4df7-8a09-765794883524
This unifies all GCC linker scripts into a single parametrised GCC
linker script that can be used for all GCC versions and architectures.
The two parameters that can be set on the linker command line are:
- PECOFF_HEADER_SIZE, this is a build time property of GenFw, but
its value is different between 32-bit and 64-bit;
- common-page-size, this can be set using -z on the ld command line,
and controls the value of the COMMONPAGESIZE constant when used in
a linker script. This value is used for the minimum section alignment.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Liming Gao <liming.gao@intel.com>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18135 6f19259b-4bc3-4df7-8a09-765794883524
Instead of hardcoding the values for the PE/COFF header size and the
section alignment, set them on the linker command line. This factors
out these values from the various linker scripts, which will allow us
to unify them in a subsequent patch.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18134 6f19259b-4bc3-4df7-8a09-765794883524
Move the .got contents to the PE/COFF .text section. This should be
a no-op, since we typically don't generate position independent code
(i.e., using -fPIC). But since the GOT contains variable addresses that
are updated at relocation time only, its contents are best kept in .text
to prevent them from being overwritten inadvertently.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18133 6f19259b-4bc3-4df7-8a09-765794883524
There is no need to pad out the end of a section of the start of
the following section is aligned to the same value. So drop the
redundant ALIGN() statements.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18132 6f19259b-4bc3-4df7-8a09-765794883524
The .rodata ELF section contains constant non-executable data that
should never be modified by the program itself. Since the risk of
inadvertent modification is typically higher than the risk of
inadvertent execution, it makes sense to put this data in the
R-X .text section rather than in the RW- .data section.
So move it there.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18131 6f19259b-4bc3-4df7-8a09-765794883524
The NOP padding in the GCC linker scripts ensures that all empty
regions in the ELF binary are filled with x86 NOP instructions.
There is no upside to doing this: if the CPU ends up executing these
instructions, we have little hope of resuming normal execution of the
program anyway. And having NOP slides in memory only makes it easier
for attackers to launch exploits. So remove them.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18130 6f19259b-4bc3-4df7-8a09-765794883524
Instead of relying on the builtin linker script of GNU ld, which
may vary based on binutils version (which is not tightly coupled to
the GCC version) and linker command line options, introduce a linker
script for AArch64 to be used by all GCC/binutils versions.
The script is laid out such that two ELF sections .text and .data are
created that map onto the PE/COFF with the same names. By aligning
.data to the minimum alignment of .text, and by not adding any
additional padding -which is what LD's builtin linker script does- the
relative offset between .text and .data is retained after the PE/COFF
conversion. This should prevent problems with debuggers and other
tooling that are ELF based.
Also provided is an overlay linker script that increases the alignment
of .text and .data to 64 KB. This is intended for DXE_RUNTIME_DRIVER
modules, to make them compatible with the newly introduced
Properties Table feature.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Olivier Martin <Olivier.Martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17824 6f19259b-4bc3-4df7-8a09-765794883524
Instead of relying on the builtin linker script of GNU ld, which
may vary based on binutils version (which is not tightly coupled to
the GCC version) and linker command line options, introduce a linker
script for AArch64 to be used by all GCC/binutils versions.
The script is laid out such that two ELF sections .text and .data are
created that map onto the PE/COFF with the same names. By aligning
.data to the minimum alignment of .text, and by not adding any
additional padding -which is what LD's builtin linker script does- the
relative offset between .text and .data is retained after the PE/COFF
conversion. This should prevent problems with debuggers and other
tooling that are ELF based.
Also provided is an overlay linker script that increases the alignment
of .text and .data to 64 KB. This is intended for DXE_RUNTIME_DRIVER
modules, to make them compatible with the newly introduced
Properties Table feature.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17802 6f19259b-4bc3-4df7-8a09-765794883524
2. Generate correct HII data offset.
3. Fixed a bug for incorrect PCD value used in conditional statement.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yingke Liu <yingke.d.liu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16784 6f19259b-4bc3-4df7-8a09-765794883524
This script is intended to assist with MASM to NASM syntax
conversions.
The output should be manually inspected and adjusted as needed, since
this script does not provide a perfect conversion.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Acked-by: Yingke D Liu <yingke.d.liu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16285 6f19259b-4bc3-4df7-8a09-765794883524
This changes includes new scripts that breaks out some of the functionality in edksetup.bat and eliminates calling the toolsetup.bat file in BaseTools directory.
Edk2Setup.bat is to be used for testing. If no bugs are reported by the end of September, 2014, the file will be renamed to edksetup.bat.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: lhauch <larry.hauch@intel.com>
Reviewed-by: Gao, Liming <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15867 6f19259b-4bc3-4df7-8a09-765794883524
GCC 4.9 may use 64-byte (0x40) alignment for data sections.
Therefore we use a different link script for GCC 4.9. The only
difference from the gcc4.4-ld-script is the alignment for data
sections.
When using the GCC48 toolchain with GCC 4.9, this error would be
encountered by GenFw:
> GenFw: ERROR 3000: Invalid
> Unsupported section alignment.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Yingke Liu <yingke.d.liu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15697 6f19259b-4bc3-4df7-8a09-765794883524
Ard Biesheuvel
Jiewen Yao
Michael Kinney
Yonghong Zhu
Thomas Palmer
Star Zeng
Jordan Justen
Liming Gao
Yingke Liu
lhauch
lgao4