/** @file Config SMRAM Save State for SmmBases Relocation. Copyright (C) 2023 Advanced Micro Devices, Inc. All rights reserved.
Copyright (c) 2024, Intel Corporation. All rights reserved.
SPDX-License-Identifier: BSD-2-Clause-Patent **/ #include "InternalSmmRelocationLib.h" #include #define EFER_ADDRESS 0XC0000080ul /** Get the mode of the CPU at the time an SMI occurs @retval EFI_MM_SAVE_STATE_REGISTER_LMA_32BIT 32 bit. @retval EFI_MM_SAVE_STATE_REGISTER_LMA_64BIT 64 bit. **/ UINT8 GetMmSaveStateRegisterLma ( VOID ) { UINT8 SmmSaveStateRegisterLma; UINT32 LMAValue; SmmSaveStateRegisterLma = (UINT8)EFI_MM_SAVE_STATE_REGISTER_LMA_32BIT; LMAValue = (UINT32)AsmReadMsr64 (EFER_ADDRESS) & LMA; if (LMAValue) { SmmSaveStateRegisterLma = (UINT8)EFI_MM_SAVE_STATE_REGISTER_LMA_64BIT; } return SmmSaveStateRegisterLma; } /** This function configures the SmBase on the currently executing CPU. @param[in] SmBase The SmBase on the currently executing CPU. **/ VOID EFIAPI ConfigureSmBase ( IN UINT64 SmBase ) { AMD_SMRAM_SAVE_STATE_MAP *AmdCpuState; AmdCpuState = (AMD_SMRAM_SAVE_STATE_MAP *)(UINTN)(SMM_DEFAULT_SMBASE + SMRAM_SAVE_STATE_MAP_OFFSET); AmdCpuState->x64.SMBASE = (UINT32)SmBase; } /** This function updates the SMRAM save state on the currently executing CPU to resume execution at a specific address after an RSM instruction. This function must evaluate the SMRAM save state to determine the execution mode the RSM instruction resumes and update the resume execution address with either NewInstructionPointer32 or NewInstructionPoint. The auto HALT restart flag in the SMRAM save state must always be cleared. This function returns the value of the instruction pointer from the SMRAM save state that was replaced. If this function returns 0, then the SMRAM save state was not modified. This function is called during the very first SMI on each CPU after SmmCpuFeaturesInitializeProcessor() to set a flag in normal execution mode to signal that the SMBASE of each CPU has been updated before the default SMBASE address is used for the first SMI to the next CPU. @param[in,out] CpuState Pointer to SMRAM Save State Map for the currently executing CPU. @param[in] NewInstructionPointer32 Instruction pointer to use if resuming to 32-bit mode from 64-bit SMM. @param[in] NewInstructionPointer Instruction pointer to use if resuming to same mode as SMM. @retval The value of the original instruction pointer before it was hooked. **/ UINT64 EFIAPI HookReturnFromSmm ( IN OUT SMRAM_SAVE_STATE_MAP *CpuState, IN UINT64 NewInstructionPointer32, IN UINT64 NewInstructionPointer ) { UINT64 OriginalInstructionPointer; AMD_SMRAM_SAVE_STATE_MAP *AmdCpuState; AmdCpuState = (AMD_SMRAM_SAVE_STATE_MAP *)CpuState; if (GetMmSaveStateRegisterLma () == EFI_MM_SAVE_STATE_REGISTER_LMA_32BIT) { OriginalInstructionPointer = (UINT64)AmdCpuState->x86._EIP; AmdCpuState->x86._EIP = (UINT32)NewInstructionPointer; // // Clear the auto HALT restart flag so the RSM instruction returns // program control to the instruction following the HLT instruction. // if ((AmdCpuState->x86.AutoHALTRestart & BIT0) != 0) { AmdCpuState->x86.AutoHALTRestart &= ~BIT0; } } else { OriginalInstructionPointer = AmdCpuState->x64._RIP; if ((AmdCpuState->x64.EFER & LMA) == 0) { AmdCpuState->x64._RIP = (UINT32)NewInstructionPointer32; } else { AmdCpuState->x64._RIP = (UINT32)NewInstructionPointer; } // // Clear the auto HALT restart flag so the RSM instruction returns // program control to the instruction following the HLT instruction. // if ((AmdCpuState->x64.AutoHALTRestart & BIT0) != 0) { AmdCpuState->x64.AutoHALTRestart &= ~BIT0; } } return OriginalInstructionPointer; }